Acdelco D1846a Gm Original Equipment Engine Oil Pressure Sensor (Auto Part) 2623

Review for gm original equipment engine oil

Price was $38.50. I have a 2006 avalanche and one day the oil pressure just went off the chart! was told by a car guy that he had a similar problem with his 1500 and that it was the instrument cluster $400! i figured i would just deal with it. Seen a fb post/ad about this issue and that it was really the pressure sensor. I figured i would give it a try, can't break the gauge more. You definitely need the special socket (lisle 13250 oil pressure switch socket) and smaller hands to replace the unit, but it can be done in about 30 minutes. Gauge now works as it should. . Fyi - this is located on the back of the block by the firewall. It is one of those "by feel" jobs, but not bad.

-S. Alba

Gm original equipment engine oil pressure an acdelco gm original equipment engine oil pressure sensor provides an electrical oil pressure signal to the engine control module, and is a gm-recommended replacement for your vehicle -acdelco d1846a gm original equipment engine oil pressure sensor

  • Value: Offering The Quality, Reliability, And Durability Of Gm Oe.
  • Value: Manufactured To Gm Oe Specification For Fit, Form, And Function.

Economical Acdelco D1846a Gm Original Equipment Engine Oil Pressure Sensor (Auto Part) D1846a

Buy Now

Prologue

Like several of the other reviewers here, i also had an issue with my oil pressure gauge on my silverado 2500hd w/ 6l (lq4) maxing out at 80psi even with the engine off (and key in run position). I unfortunately also needed to replace my knock sensors, so i decided to replace this while i was there. It was definitely much easier to replace with the intake off while doing the knock sensors, so i recommend replacing this while you're there if your gauge is maxed out when the key is in the run position. . The sensor, at least on the 6. 0l engine, is located at the back of the block, just a few inches towards the drivers side from the centerline of the block. If the intake is off, you will see it sticking up just past where the valley pan ends. To it's left, on the centerline of the block is another sensor, which i believe may be a cam position sensor or something similar. . I also used the lisle 13250 oil pressure switch socket (also purchased from online store) to remove and install the sensors. I think there would have been room for a regular socket on this particular engine, but i'm not positive. I purchased it as it was cheap insurance, and ensured that i would be able to easily replace the sensor while the intake was off of the engine. Also, that socket is made in usa, which is always a plus! The Best gm original equipment engine oil as-of ( Apr 2020 ) | Acdelco-Auto Part Review Value ACDelco D1846A GM Original Equipment Engine Oil Pressure Sensor Gm-recommended replacement part for your gm vehicle's original factory component. Offering the quality, reliability, and durability of gm oe. Manufactured to gm oe specification for fit, form, and function .

Acdelco D1846a Gm Original Equipment Engine Oil Pressure Sensor Review (d1846a)

I had an alert on my dash that read "no oil pressure, stop engine". My oil levels were fine. After checking online for possible problems fixes, i concluded that it was either a bad oil pressure sensor/sending unit or a bad oil pump. Considering the cost to replace the oil pump, i decided to try replacing the sensor first. I paid a third of the price ordering this part from online store that i would have paid at my local auto parts store. I found a couple of youtube videos for replacing this in my 2006 impala ss. I bought the corresponding socket and showed my dad the videos. He quickly replaced the sensor. I then took a test drive for about 20 minutes and the "check engine" light came on and as i went to turn my car off, the "no oil pressure, stop engine" alert flashed on. After going back to google, my dad unhooked my battery for a few minutes to reset the codes that are stored battery's memory(ecm). So if the code returned, then the problem still existed. Thankfully, the sensor was the fix! -D. Zelda

Acdelco D1846a Original Equipment Pressure

Rank
Automotive
Brand
ACDelco
EAN
0707773339886
Product Dimensions
Height:1.20 inches
Length:2.50 inches
Weight:0..06 pounds
Width:1.60 inches
Manufacturer
ACDelco
Guarantee
12 Months / 12,000 Miles (Parts Only)
Model
D1846A
MPN
D1846A
Total-Items
1
Quantity
1
Part/Serial Number
D1846A
Group-Order
Automotive Parts And Accessories
Category
AUTO PART
SKU
D1846A-ACD
UPC
707773339886
Warranty
12 Months / 12,000 Miles (Parts Only)

gm original equipment engine oil pressure Automotive Parts And Accessories, An acdelco gm original equipment engine oil pressure sensor provides an electrical oil pressure signal to the engine control module, and is a gm-recommended replacement for your vehicle s original component. it measures the oil pressure in your vehicle s engine and will alert you through the oil pressure gauge or warning lamp if the oil pressure falls below the specified pressure. this original equipment engine oil pressure sensor has been manufactured to fit your gm vehicle, providing the same performance, durability, and service life you expect from general motors. Acdelco D1846a Gm Original Equipment Engine Oil Pressure Sensor (D1846A-Acdelco).

Acdelco D1846a Original Equipment Pressure Automotive Parts And Accessories

gm original equipment engine oil ACDelco D1846A GM Original Equipment Engine Oil Pressure Sensor (Switch to Mobile/Desktop Version)

As advertised

Acdelco D1846a Gm Original Equipment Engine Oil Pressure Sensor
Click to see NoticeAcdelco D1846a Gm Original Equipment Engine Oil Pressure Sensor (Auto Part)"This is the exact sensor that came on my 2004 denali, the original one failed at 113k miles, pegged at 80 pounds when running. If you've got small hands this isn't too bad of a repair. I don't. Expect your hand, wrist and forearm to take some abuse, it's a very tight fit, and there is sharp stuff everywhere. I had the most trouble getting the connector off of the old one. If it had been turned just a little in either direction it would have been easier, and maybe you could use a small screwdriver to get at the retaining clip, but that's just the luck of the draw. . Removed the top and driver's-side shroud to gain access, the sensor sticks straight up out of the block just behind the intake manifold, favoring the driver's side. The connector has three wires coming out of it, and clips on one side only (thank goodness). Even though you can't see it, it's pretty much the only thing in that general area. You've got to have a knuckle for your ratchet, and an assortment of extensions wouldn't hurt. You need to either have the special socket, or a deep-well 1 1/16" that will clear the connector on the sensor. . So have some patience and keep at it, and you'll save yourself a ton of money doing it yourself."


Automatic Transmission Assemblies » Bands » Banner Kits » Bushings » Clutch Plates » Cooling Lines » Drive Chains » Fluids » Gaskets » Hard Parts » Manual Transmission Assemblies » Master Cylinder Repair Kits » Modulators » Overhaul Packages » Pans & Drain Plugs » Rebuild Kits » Sealing Rings » Seals & O-Rings » Shift Kits » Snap Rings » Solenoids » Tools » Valve Body Kits » Washers » Acdelco D1846a Gm Original Equipment Engine Oil Pressure Sensor (Auto Part) D1846a


Delphi AS10017 Ignition Knock Sensor

Delphi is an original equipment brand that partners with other manufacturers to supply the parts your car was originally built with. This product is in a delphi package, note that the part may have been manufactured by an independent delphi supplier.

Delphi AS10017 Ignition Knock SensorDelphi-AS10017-Ignition-Knock-Sensor

DELPHI AS10017 IGNITION KNOCK SENSOR Summary
Brand :    delphi
Weight :    0.20 pounds
Model :    AS10017
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Part (delphi product review) for Delphi AS10017 Ignition Knock Sensor available as-of ( Apr 2020 )

GM Filter

Gm oil pressure switch filter - 12585328

GM FilterGeneral-Motors-GM-Filter

GM FILTER Overview
Brand :    general motors
Model :    12585328
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Part (general motors product review) for GM Filter available as-of ( Apr 2020 )

Lisle 13250 Oil Pressure Switch Socket

Oil pressure switch socket fits 1 1/16" switches up to 2 5/8" long. Found on newer gm and chrysler vehicles.

Lisle 13250 Oil Pressure Switch SocketLisle-13250-Pressure-Switch-Socket

LISLE 13250 OIL PRESSURE SWITCH SOCKET Reviews
Brand :    lisle
Weight :    0.44 pounds
Model :    13250
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Part (lisle product review) for Lisle 13250 Oil Pressure Switch Socket available as-of ( Apr 2020 )
Price :    $6.00 (was $10.18)
  • Fits 1 1/16" switches up to 2 5/8" long, found on newer gm and chrysler vehicles
  • Fits 1 1/16" oil pressure sending unit (gauge type), found on most all 1991 and newer gm vehicles
  • Use with 3/8" drive or 1 1/8" hex.
  • Also fits 1987 and newer chrysler vehicles with combination light and gauge oil pressure switches

ACDelco 213-4514 Professional Engine Coolant Temperature Sensor

An acdelco professional, premium aftermarket engine coolant temperature sensor is the high quality replacement ideal for many vehicles on the road today. It monitors the engine temperature. The engine temperature signal is used by the engine control module to adjust the air/fuel mixture and ignition timing. This premium aftermarket replacement engine coolant temperature sensor is manufactured to meet your expectations for fit, form, and function.

ACDelco 213-4514 Professional Engine Coolant Temperature SensorACDelco-213-4514-Professional-Coolant-Temperature

ACDELCO 213-4514 PROFESSIONAL ENGINE COOLANT TEMPERATURE SENSOR Overview
Brand :    acdelco
Weight :    0.5 pounds
  • Manufactured to meet expectations for fit, form, and function
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from acdelco
Price :    $12.09 (was $15.61)
Model :    213-4514
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Part (acdelco product review) for ACDelco 213-4514 Professional Engine Coolant Temperature Sensor available as-of ( Apr 2020 )

ACDelco 9748RR Professional Spark Plug Wire Set

I Have A Silverado And I Didn't Realize Until I Was Putting These On That They Were The Same Ones That The Truck Came With. I Was Very Happy With Them.

Acdelco professional spark plug wire sets are engineered with strength enhancing fiberglass and high temperature silicone insulators. These spark plug wires are a premium aftermarket offering that covers over 96% of domestic vehicles on the road today. Parts offered for gm, chrysler, ford, honda, nissan, and toyota vehicles. Acdelco professional spark plug wire sets are designed to match the fit, form, and function found on new vehicles.

ACDelco 9748RR Professional Spark Plug Wire SetACDelco-9748RR-Professional-Spark-Plug

Acdelco 9748rr Professional Spark Plug Wire Set (Auto Part) FAQ.

Great Replacement Set. Worked Great On My Avalanche. Looked Almost The Same As The Ones They Replaced. -Notice from B. Lawrence, New South Wales

Click to Show acdelco 9748rr professional spark plug wire set (auto part) Details

Good Price. Do Not Try To Replace The Plugs Without Changing These Also. I Had 2 Of The Old Ones Come Apart When Trying To Remove Them From The Plugs.

Acdelco-9748rr-professional-spark-plug-wire-set-(auto-part) set picture

- P. HakalaVery Disappointed. Trying To Get Warranty Information From Online Store And Receiving No Communication Back From Them. I Have Had 2 Wires Break On Me

Good Quality Wires But Really Short Think They Are Many For 4. 8 And 5. 3 Put Then On A 6. 0 They Didn't Reach Had To Lower My Coils

N. Shirley, Sachsen-Anhalt

ACDELCO 9748RR PROFESSIONAL SPARK PLUG WIRE SET Reviews
Price :    $23.04 (was $28.70)
  • Spark plug distributor boot shape and materials provide proper fit, installation, and water-tight seal
  • Terminal design improves spark plug retention and assists installation with excellent corrosion resistance
  • Insulator employs high dielectric materials
  • Coil retainer prevents fretting and micro-arcing
  • Wire conductor, wire length, and diameter help provide maximum spark delivery and protection
Brand :    acdelco
Weight :    1.25 pounds
Model :    9748RR
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Part (acdelco product review) for ACDelco 9748RR Professional Spark Plug Wire Set available as-of ( Apr 2020 )

ACDelco 89060413 GM Original Equipment Intake Manifold Gasket Kit Side Intake Gaskets

Acdelco gm original equipment engine intake manifold gasket sets include everything required to replace your vehicle s engine intake manifold gasket. The engine intake manifold gasket seals the intake manifold to the cylinder head intake ports. It prevents the loss of fuel/air mixture from the intake manifold and prevents dirt/debris from entering into the engine and intake ports. These engine intake manifold gasket sets feature high-grade rubber gaskets, come with the appropriate manifold bolts that must be changed when the manifold gasket is changed, and are gm-recommended replacements for your vehicle s original components. These original equipment kits have been manufactured to fit your gm vehicle, providing the same performance, durability, and service life you expect from general motors.

ACDelco 89060413 GM Original Equipment Intake Manifold Gasket Kit Side Intake GasketsACDelco-89060413-Original-Equipment-Manifold

ACDELCO 89060413 GM ORIGINAL EQUIPMENT INTAKE MANIFOLD GASKET KIT SIDE INTAKE GASKETS Advantage
Brand :    acdelco
Weight :    0.21 pounds
  • Contains everything required to replace your vehicle's intake manifold gasket set
  • Made of high-temperature resistant material for durability
  • Gm-recommended replacement part for your gm vehicle's original factory component
  • Includes new intake manifold bolts for convenience
  • Helps prevent dirt and debris from entering the valve train for optimal performance
Price :    $64.26 (was $68.98)
Model :    89060413
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Part (acdelco product review) for ACDelco 89060413 GM Original Equipment Intake Manifold Gasket Kit Side Intake Gaskets available as-of ( Apr 2020 )

ACDelco 213-363 GM Original Equipment Engine Camshaft Position Sensor

An acdelco gm original equipment engine camshaft position sensor monitors the rotational position of the camshaft(s), and is a gm-recommended replacement for your vehicle s original component. It provides a signal to the engine control module, which compares the camshaft position with the crankshaft position to determine ignition and fuel injection timing. This original equipment engine camshaft position sensor has been manufactured to fit your gm vehicle, providing the same performance, durability, and service life you expect from general motors.

ACDelco 213-363 GM Original Equipment Engine Camshaft Position SensorACDelco-213-363-Original-Equipment-Camshaft

ACDELCO 213-363 GM ORIGINAL EQUIPMENT ENGINE CAMSHAFT POSITION SENSOR Spotlight
Brand :    acdelco
Weight :    0.13 pounds
Model :    213-363
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Part (acdelco product review) for ACDelco 213-363 GM Original Equipment Engine Camshaft Position Sensor available as-of ( Apr 2020 )
Price :    $38.22 (was $41.58)
  • Gm-recommended replacement part for your gm vehicle's original factory component
  • Offering the quality, reliability, and durability of gm oe
  • Manufactured to gm oe specification for fit, form, and function

Fel-Pro 72401 O-Ring

Fel-pro gaskets offers 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Fel-Pro 72401 O-RingFel-Pro-72401-O-Ring

FEL-PRO 72401 O-RING Featured
Brand :    fel-pro
  • Unsurpassed quality you can trust
  • Meets or exceeds all original equipment specifications
  • Engineered and manufactured for the repair environment
  • Application-specific design ensures a perfect fit
Price :    $1.67 (was $1.99)
Model :    72401
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Part (fel-pro product review) for Fel-Pro 72401 O-Ring available as-of ( Apr 2020 )

Dorman 917-033 Knock Sensor Harness

Dorman products, inc. Is well-known as a leader in providing quality auto parts to the aftermarket. They've earned a reputation for excellence from over three decades of experience in providing automotive replacement parts, fasteners and service line products primarily for the automotive aftermarket. Dorman's prestigious position stems from a unique combination of application expertise, innovative product design, and breadth of product offerings, many of which are not conveniently or economically available elsewhere.

Dorman 917-033 Knock Sensor HarnessDorman-917-033-Knock-Sensor-Harness

DORMAN 917-033 KNOCK SENSOR HARNESS Review
Brand :    dorman
Color :    Black
Weight :    0.30 pounds
Model :    917-033
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Part (Automotive Parts And Accessories product review) for Dorman 917-033 Knock Sensor Harness available as-of ( Apr 2020 )
Price :    $20.36 (was $22.82)
  • Assist in relaying electrical signals to the engine management system
  • Oe part number: 12601822

ACDelco 213-3521 GM Original Equipment Ignition Knock Detonation Sensor

These were high quality, they are acdelco parts. Worked perfectly in my 06' chevy silverado and fixed the knock sensor code being pulled. . The installation is not terribly complicated. Myself and 1 other person with some mechanical skills took about 1. 5 hours to complete from start to finish. The biggest p. I. T. A was getting the old sensors out. The old ones were rusted and weren't ready to separate from the engine. Other than that, just unplugging some connections, removing the intake (a few bolts) and separating the fuel lines. Just be careful with the knock sensor wiring on my application it felt brittle.

An acdelco gm original equipment ignition knock (detonation) sensor monitors the engine for pinging or spark knock, and is a gm-recommended replacement for your vehicle s original component. The sensor creates a voltage signal based on the vibrations caused by erratic air/fuel mixture combustion; the engine control module uses this signal to adjust the ignition timing and air/fuel mixture. This original equipment ignition knock sensor has been manufactured to fit your gm vehicle, providing the same performance, durability, and service life you expect from general motors.

ACDelco 213-3521 GM Original Equipment Ignition Knock Detonation SensorACDelco-213-3521-Original-Equipment-Detonation

Acdelco 213-3521 Gm Original Equipment Ignition Knock Detonation Sensor (213 3521) FAQ.

This product is what the mechanic ordered! gm bulletin required the replacement of knock sensors for 5. 3l and once replaced my check engine light is off! i'm not a mechanic, i use youtube and complete the work to specs to include torque. -Notice from N. Weber, Poole

Click to Show acdelco 213-3521 gm original equipment ignition knock detonation sensor (213 3521) Details

I highly recommend a pair of these anytime you are replacing one knock sensor. You are already there to replace the rear one, most likely. On one of the trucks i worked on, the rear one was so corroded the terminal broke off the rear sensor rather than releasing when i tried to remove the electrical connector. The engine had been boggish for a long time, but didn't give a knock sensor code until recently. Wow, did these make a difference! the vehicle runs like a different engine with higher horsepower had been swapped in. The engine is much more responsive and it doesn't make a lot of noise and do much of nothing under hard acceleration.

Acdelco-213-3521-gm-original-equipment-ignition-knock-detonation-sensor-(213-3521) set picture

- D. WaytExcellent value. Installed in my 2004 sierra 2500 4 x 4 6. 0 v8 denali crew cab. . If you have problems removing them, go slowly. You don't want it breaking off at the threaded bold. One person once told me to pour oil down into the hole and let sit overnight if you think there is a chance of it breaking off. . Typically the one closest to the windshield in a v8 is surprisingly the one that gets the most rotten. Apparently it gets more water on that side from the windshield of my truck. I have attached pictures of the front and rear sensors. The one closest to the windshield (rear) was obviously more rusted. You can also see where the front sensor broke at the wiring harness. . Just get a new harness and cut the wires rather than mess around trying to disconnect. . You may or may not need a new intake gasket. I replaced mine, but i kept the old one as it was still in great shape. I strongly recommend you replace the harness, and replace both sensors at the same time. . Recommend you have a vacuum on hand to clean underneath the intake. I had just bought this truck used, and it needed some tlc. Just be careful not to scratch the metal or clean too harshly. . Its also a great time to clean the throttle body. If the knock sensors have gone bad, it is also likely due for a throttle body cleaning. Use the specific throttle body spray, and since the intake is off, remove the throttle body and take it to the bench to clean.

Perfect 2001 yukon xl 1500 slt fit perfect

S. Meyer, Nova Scotia

ACDELCO 213-3521 GM ORIGINAL EQUIPMENT IGNITION KNOCK DETONATION SENSOR Overview
Brand :    acdelco
Weight :    0.15 pounds
  • Manufactured to gm oe specification for fit, form, and function
  • Offering the quality, reliability, and durability of gm oe
  • Gm-recommended replacement part for your gm vehicle's original factory component
Price :    $39.98 (was $45.90)
Model :    213-3521
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Part (acdelco product review) for ACDelco 213-3521 GM Original Equipment Ignition Knock Detonation Sensor available as-of ( Apr 2020 )

acdelco d1846a gm original equipment engine oil pressure sensor Price : 36.99, was : 38.5 as 2017-06-04
USUKDEFRESITJPCNCAGlobal
United States
Great Britain
German
France
Spain
Italy
Japan
China
Canada
World Wide
Acdelco D1846a Gm Original Equipment Engine Oil Pressure Sensor (Auto Part) Reviewed by on jerdus.com

Top acdelco d1846a gm original equipment engine oil pressure sensor (auto part) Content

The F.A.Q. for acdelco d1846a gm original equipment engine oil pressure sensor

The oil gauge on my 2003 chevy suburban was maxing out at 80psi so i did some research and everything pointed to the oil-sending unit. After replacing this oil sending unit the oil pressure returned to normal. . Warning, it is difficult to get to and it took a little while my hands got beat up reaching back to get to it. It is difficult enough that once you start you just want to get the job over with as quickly as possible so i would highly recommend a socket that is made only for these oil sending units. The oil sending unit socket will have thin walls so that it can fit in such a tight spot. . I also recommend you have u joints and a good wrench set with many extenders as i learned the hard way when my set didn t have enough parts to reach it. I would recommend that you have some one to pass you things as your whole body will be lying over the engine to reach the area and it would be quite difficult to have to stop and reach for a different size extension. . I recommend when putting the new oil sending unit back on that you use your hands to get it started and then put the socket over it. This way it won t fall out of the socket because if you lose it, it can be very difficult to find or reach. . Overall this is one of the more difficult jobs to do but it is definitely doable and you should be able to do this with the right tools. . The most important accessories you will need to complete this task are. . 3/8 extenders. . Oil sending unit socket. . 3/8 u joint. . Hope you found this review helpful.

A number of questions have been asked here.

Q&A

(0) Question: will this fit a 07 escalade?


(1) Question: will this fit a 2007 gmc sierra sle 5.3? the oil pressure guage on the dash sits at zero right now.


(2) Question: its stating the connector is pt1825, but when i visit that parts page its saying my vehicle is not compatible. what gives?


(3) Question: is this just an "pressure-no pressure" sensor or can it measure pressure ? that is, does it deliver a voltage proportional to pressure ?


(4) Question: typically where is the sensor located on the engine block?


(5) Question: will this fit a 2003 chevy trailblazer 5.3l


(6) Question: no has o-ring..?


(7) Question: local gm dealer said that there was a specific sensor for trucks with gauges versus idiot lights. is this the right part for gauges. seems it must be



(note) Question: where/how to get Acdelco (manufacturer's brand) accessories & similiar Acdelco's products

Answer:

Click the marked text to copy link to Clipboard

As advertised and fixed the problem in a hot minute. This item fits many gm vehicles. In this case it was for my gmc sierra. My oil pressure gauge suddenly shot up to the max reading of 80 lbs. Looked around on the internet and found out that that is the default reading that happens when your oil pressure sender goes bad. Ordered this from online store because it was half the price the local auto parts places wanted for the very same exact item. Yes the exact item, not a look alike or generic piece of junk. Shipped promptly and arrived in excellent condition.


Automotive 18148651, Replacement Parts 13791751, Transmission & Drive Train 11932751, Transmissions & Parts 17542751Top Acdelco D1846a Gm Original Equipment Engine Oil Pressure Sensor (Auto Part) FAQ Content

Best acdelco d1846a gm original equipment engine oil pressure sensor (auto part) in review

I originally had these sensors replaced by a local mechanic and his supplier is o'reilly's. Not long after having the expensive procedure of replacing these, the error code came back on. There are many aftermarket parts i've used on my truck, this should have not been one of them, go with acdelco for these sensors as it was the original equipment.

O. Kimberly, Haute-Normandie

You might like to see Premium filtech oil bosch premium filtech oil filter provides superior oil filtration for increased engine protection. this oil filter, featuring bosch filtech, utilizes an exclusive blend of natural -bosch 3300 premium filtech oil filter
  • Bonus: Strong Steel Base Plates And Housings Prevent Warpage, Leaks And Poor Fit.
  • Bonus: Silicone Anti-drain Back Valve Ensures A Supply Of Clean Oil When The Car Is Started.
Shopping Bosch 3300 Premium Filtech Oil Filter (Auto Part) 3300 Bosch 3300 Premium Filtech Oil Filter (Auto
Or you might like to consider 03094 Gtx 10w-40 Conventional Motor Oil - 5 Premium Conventional Motor Oil Re-engineered With Trishield Technology. -Castrol 03094 Gtx 10w-40 Conventional Motor Oil - 5 Quart
  1. Add-on: Maximum Protection Against Viscosity And Thermal Breakdown.
  2. Add-on: Ultra Low Friction To Improve Gas Mileage; Bottle Color: White.
Buy Castrol 03094 Gtx 10w-40 Conventional Motor Oil - 5 Quart (Auto Accessory) 03094c Castrol 03094 Gtx 10w-40 Conventional Motor Oil - 5 Quart

A. Russell, Nova Scotia says

Acdelco usually makes good quality components, in my opinion. This item seems to be no different, but there is one major flaw that caused me to rate this a 4 star instead of 5. . Replacing the oil pressure sending unit can take some time, depending on the vehicle. The dealership told me they would have to remove the intake manifold to be able to replace the unit on my 2003 gmc yukon, and they were charging me for 2. 6 hours of labor. This may be true, if they don't have the special thin walled socket that makes the job much easier. . After reading many reviews about other people having success replacing the unit themselves, i decided to give it a shot since the dealer was going to charge me about 500$. . When i received the unit it did not fit into the special 1-1/16 socket that i bought for the job. This was frustrating, but i had read another reviewer say that they had experienced a similar issue once. Besides being outside the socket tolerance, the part looked good quality, so i took out my files and carefully filed down the corners. The flat sides were the right dimension, but it was the corners that weren't sized properly, and causing it to not fit in the socket. . Once i filed the corners down the unit fit snugly into the socket. . It took me about 30 minutes total to unscrew the old unit, and screw the new one back in. Before, my oil pressure gauge would only peg high at 80psig, and i think the old sensor was bad. This one works great though, and now my oil pressure reads normal, around 40 psig, in the middle of the band and gives variable pressure readings like it should as rpm changes.

F. Anonymous, Bath and North East Somerset

So far so good. The only complaint i have is that there's a little rubber piece that's inside where the prongs connect to the plug. And a little ring as well that didn't come with the new one. So don't discard them when you get your old sensor out.

V. Susan, Washington says

Works fine, much cheaper than dealer.

B. Benton, Sefton

This acdelco oil sensor worked perfectly as a replacement on my 2005 yukon denali. My oil pressure gauge had pegged 80 once the original sensor stopped performing, when it should have read just past 40. This diy job took me 40 minutes and a couple of abrasions on my hands/forearm. As others have stated, it is a challenge to locate the old sensor and find room to maneuver your hands to replace it. Still, the cost savings was certainly worth it. To do this job right, i also recommend the lisle 13250 oil pressure switch socket available on online store, and an adjustable ratchet extension.

I. Ruff, Minnesota says

My oil pressure suddenly began reading 80 / full scale. It read 80 as soon as the key was turned to the start position, no engine start, it just read 80 psi. I own a 2003 silverado 1500 lt with the 5. 3l v8. This oil pressure sensor is the recommended replacement for my vehicle. It's a bugger to replace as it is located atop the engine block at the rear of the motor. There are a few videos to be found online that show the steps to replacing this sensor. The biggest problem being location and the second being the disconnection of the captive connector. Your reward is immediate. After install you turn the key to start and the oil pressure read zero (0). I started the motor and pressure comes to nominal 40 and increases slightly when the engine is revved.  acdelco d1846a gm original equipment engine oil pressure sensor. . Note: strongly urge you to buy the socket that fits the space correctly. Buy it here: lisle 13250 oil pressure switch socket

Z. Crawford, Sutton

The oil gauge on my 06 gmc yukon 5. 3l was reading 80 when engine was running. I read the reviews and people who had this problem before were saying that it was the oil pressure sensor, i decide to order this part acdelco like the original that came with my truck. Got the part today and it took me about 45 minutes to installed, had a little hard time but i got it done. I crank the truck and it read 40 it went back to normal, i'm glad it work and save me some money on the part and labor thanks a million online store.

Q. Theresa, Kent says

It was a nice fit but when i first tried to install it i could only go a couple of turns and i thought i had cross threaded it. I removed the new one and tried the old one back in to make sure the engine connection threads were ok and it installed fine. Again, i tried to install the new one and again it didn't feel right. Took it out and noticed a lot of some kind of teflon material on the threads. I cleaned some of the material with a small knife a and i was able to installed it just fine.

A. Angelica, Tennessee

No issues.

D. Rowe, Surrey says

Great product!

T. Nicole, Poole

Very happy

X. Sandra, East Sussex says

Fit my 2008 suburban with 5. 3l and was a fraction of the price the dealer or other parts stores wanted for same thing. In fact, several parts stores wanted double the price for after marker part rather than acdelco. Be very careful when replacing that you don't drop either one as you will probably lose it in some hidden, unaccessible area on the engine. Very very tight working conditions. Not recommended for those with limited patience.

K. Moore, Dorset

Oil pressure gauge was stuck on 0 psi. Replaced sensor, works great. 2005 silverado 5. 3. 27 mm or 1-1/16 deep well socket. Don't use a impact sockets - too thick wall. Don't need to remove any parts to get to it, just climb in the engine bay, unplug the wire plug, and unscrew the sensor. Do need about 6" extension and maybe wiggler.



Leave a Reply

You must be logged in to post a comment.


Top gm original equipment engine oil Review Content

Related Products

Product Image Gallery

Top-acdelco-d1846a-original-equipment-pressure-2623016hpus8-Content