Camco 42161 Refrigerator Vent Base White (Auto Accessory) 5653

Review for refrigerator vent base

Price was $8.81. Worked perfectly

-A. Megan

Refrigerator Vent Base Camco’s Rv Refrigerator Vent Base Is A Replacement Vent Base For Vents On Top Of The Rv. It Is Made Of Uv Stabilized, Durable Polypropylene Plastic. -Camco 42161 Refrigerator Vent Base White

  1. Extras: Uv Stabilized.
  2. Extras: Made Of Durable Polypropylene Plastic.

Inexpensive Camco 42161 Refrigerator Vent Base White (Auto Accessory) 42161

Buy Now

Foreword

Perfect fit Best refrigerator vent base | Camco-Auto Accessory Review as-of ( Dec 2018 ) Extras Camco 42161 Refrigerator Vent Base (White) Replacement rv refrigerator vent base. Uv stabilized. Made of durable polypropylene plastic. White. Patented .

Camco 42161 refrigerator vent base white Review (42161)

Perfect fit. Easy to install. It is longer than the original therefore it is important that measurements are made to ensure there is room for the vent. -T. Aldana

Camco 42161 Refrigerator Vent White

  1. Class: Automotive
  2. Brand: Camco
  3. EAN: 0700115582636
  4. Product Dimensions:
    Height:2.00 inches
    Length:26.00 inches
    Weight:0.80 pounds
    Width:7.50 inches
  5. Manufacturer: Camco
  6. Part-Warranty: Limited 1 Year Warranty
  7. Model: 42161
  8. MPN: 42161
  9. Total Items: 1
  10. Quantity: 1
  11. Part/Serial Number: 42161
  12. Type: Automotive Parts And Accessories
  13. Category: AUTO ACCESSORY
  14. ReleaseDate: 2014-02-12
  15. UPC: 014717421614

refrigerator vent base Automotive Parts And Accessories, Camco's rv refrigerator vent base is a replacement vent base for vents on top of the rv. it is made of uv stabilized, durable polypropylene plastic. Camco 42161 Refrigerator Vent Base White (42161-Camco).

Camco 42161 Refrigerator Vent White Automotive Parts And Accessories

refrigerator vent baseCamco 42161 Refrigerator Vent Base (White) (Switch to Mobile/Desktop Version)

Fit good

Camco 42161 Refrigerator Vent Base White
Click to see NoticeCamco 42161 Refrigerator Vent Base White (Auto Accessory)"This unit replaced the original on my 2000 coachmen. It is about an inch shorter in height than the original, which is a better design as it makes it much harder for rain and wind to enter the vent top."


Air Fresheners & Dehumidifiers » Bed » Cleaning & Storage » Accessories » Camco 42161 Refrigerator Vent Base White (Auto Accessory) 42161


HENG'S 14 RV CAMPER TRAILER UNIVERSAL WHITE ROOF VENT W 12V 12 VOLT FAN 71112-C NO GARNISH RING INCLUDED

Strong fine mesh screen extra strong galvanized steel roof flange with mill finish dimensions 8. 5" round x 1. 5" deep vent color is white will replace existing elixir or ventline products (please check the hinge style before ordering). Includes 28 screws and 70" of butyl tape for mounting your roof vent. Standard oem dimensions (opening 14. 5" x 14. 5") mounting flange (16. 5" x 16. 5") * garnish ring is not included *

HENG'S 14 RV CAMPER TRAILER UNIVERSAL WHITE ROOF VENT W 12V 12 VOLT FAN 71112-C NO GARNISH RING INCLUDEDTRAILER-UNIVERSAL-71112-C-GARNISH-INCLUDED

HENG'S 14 RV CAMPER TRAILER UNIVERSAL WHITE ROOF VENT W 12V 12 VOLT FAN 71112-C NO GARNISH RING INCLUDED Pros
Brand :    heng's
Size :    1 Pack
Weight :    5.00 pounds
Model :    1
Quantity :    1
Order click here :    normally ships in 1-2 business days
  • * garnish ring is not included *
  • 12 volt fan with 6" blades
  • Vent color is white
  • Strong fine mesh screen
  • Extra strong galvanized steel roof flange with mill finish
Price :    $27.99
Home Improvement :    Best Building Material (heng's product review) for HENG'S 14 RV CAMPER TRAILER UNIVERSAL WHITE ROOF VENT W 12V 12 VOLT FAN 71112-C NO GARNISH RING INCLUDED available as-of ( Dec 2018 )

Camco 40033 Replace All Plumbing Vent Kit Polar White

I have an older mobile home, with 3 open vent stacks. The old abs schedule 40 stacks are smaller than new code calls for, and finding covers isn't easy. Then i came across these with a search on online store. I am very happy not only to have found them, but they were inexpensive, easily installed and stay put after fitting them in the stacks. It took me longer to get out my ladder and climb up to the roof, then it did to install all 3 caps. I wish i had bought them years sooner.

Use camco rv replace all plumbing vent kit to replace damaged plumbing vents with quality original factory replacement parts. Kit fits 1" to 2-3/8" o. D. Pipe and includes vent plus all hardware and putty tape needed for installation.

Camco 40033 Replace All Plumbing Vent Kit Polar WhiteCamco-40033-Replace-Plumbing-Polar

Camco 40033 Replace Plumbing Vent Kit Polar White (Auto Accessory) FAQ.

This cap fit perfectly on top of my vent pipe on my motor home, and solved the problem of not having vent pipe covers. . Apparently i brushed under a low-hanging tree and lost my old ones. But just snap right in (and the spring-loaded legs are really tight, so they should hold for quite some time). . Great product! -Notice from E. Suzanne, Medway

Click to Show camco 40033 replace plumbing vent kit polar white (auto accessory) Details

Was as easy to affix as camco said, and does seem to be nearly universal for any vent pipe (up to 2"). This went on an rv which has not moved since, so can't speak to longevity/durability/stability when on the road. It was certainly much easier than dealing with a new flange and cap. Will be five stars if it stays put once moving down the road. For the price it's worth it even if it only lasts a year.

Camco-40033-replace-plumbing-vent-kit-polar-white-(auto-accessory) set picture

- H. AnonymousOne of my 2" pvc pipe plumbing roof vents leaked and ruined my ceiling. Turns out it routes thru a 90 degree elbow in the attic, and that elbow sprung a leak. Rain/snow collected inside the vent and leak out the elbow onto my ceiling. I've fixed the cracked elbow, but in case any of my remaining roof vents fail in the same manner, i've installed a couple gadgets to prevent further leaks. Both gadgets are really cheap insurance to avoid a future problem, imho. . The first gadget is the "camco 40034 replacement plumbing vent cap (polar white)" found on online store. For $5. 18 and free shipping, it's a cheap and very effective way to prevent water from ever entering my vents again, while still allowing the vent to breath. The cap slides onto the pipe easily, and is very sturdy so no strong wind will blow it off. It may not last as long as my 30 year roof, but i'll just purchase more when needed. . The second gadget is the "oatey 14206 2-inch carded rc-2 collar" also found on online store. When inspecting my roof vents for other problems, i noticed the rubber flashing boots were getting old and although not leaking now, was afraid they'll leak soon. For $2. 27 and free shipping, these work amazingly well. Just slide them over the existing boot to protect it from further sun damage and prolong its life, and provide a second seal around the vent pipe. Again it may not last as long as my 30 year roof, but i'll just purchase more when needed. . Attached pre/post photos show both above gadgets installed on my roof vent.

I just needed to replace two of the vent caps on myntrailer. It seemed like a waste to get the whole vent assembly, but it was cheap enough that i didn't mind just using the cap, which fit just like the original.

W. Allen, Champagne-Ardenne

CAMCO 40033 REPLACE ALL PLUMBING VENT KIT POLAR WHITE Overview
Brand :    camco
Color :    White
Size :    1-1/2"
Weight :    0.20 pounds
Model :    40033
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (camco product review) for Camco 40033 Replace All Plumbing Vent Kit Polar White available as-of ( Dec 2018 )
Price :    $4.29 (was $7.31)
  • Uv stabilized for long life
  • Replace damaged rv plumbing vents with quality original factory replacement vents
  • Includes vent plus hardware and putty tape for installation
  • Fits 1" to 2-3/8" od pipe
  • Polar white

Camco 42160 Refrigerator Roof Vent Cover

My factory 2005 vent cover had become sun damaged. Due to hurricane irma, it was blown into about elevinteen pieces. I purchased this and the matching base in case my base was damaged or wouldn't line up with the screws in this cover. Luckily all i needed was this cover. . I really wish that in the description somewhere, it would list the mounting screw spacing. If i had that information, i wouldn't have needed to purchase the base. I have a spare now, and it wasn't expensive.

Camco rv refrigerator vent cover fits dometic and newer norcold bases. It is made from uv stabilized, durable polypropylene plastic ensuring long lasting durability. This cover is easy to use and is highly durable.

Camco 42160 Refrigerator Roof Vent CoverCamco-42160-Refrigerator-Roof-Cover

Camco 42160 Refrigerator Roof Vent Cover (Auto Accessory) FAQ.

A very inexpensive, yet quality replacement for the original. Mine was rotted out and falling apart to the touch when i purchased the trailer. This replacement took me about 15 minutes to install according to the included directions. Don't forget to seal the screws with sealant after you install it! -Notice from Z. Stacey, Oldham

Click to Show camco 42160 refrigerator roof vent cover (auto accessory) Details

I bought these from a 3rd party vendor off online store and was skeptical about its fit and function. I had more of a problem getting the old broken vent cover off the base. This new cover went on in about 15 minutes (8 minutes was digging out old lap sealant putty). Its fits dometic perfectly, however if you use norcold you will need to use the supplied brackets. It feels like flimsy plastic and if you beat on it with a hammer it will probably break, but overall it is molded well. At $18 its worth it

Camco-42160-refrigerator-roof-vent-cover-(auto-accessory) set picture

- G. PaulaThis is a diy job. Comes with all the screws you need. Very easy to install. You will need 3/16 bit (and screw gun) phillips head, tape measure, putty knife to remove the old dicor and some new dicor to finish up the job. Took longer for me to get the tools on the roof than to do the job. Sure beats the dry rotted, broken and cracked one that was on there.

This is nice vent cover. It is made from thick shiny plastic and looks like it will hold up well over time. Please note it is just the top cap. It is designed to be attached to the existing base on the roof of your rv. . All you need to install this is a cordless drill and 3/16" bit, a phillips screwdriver bit and a tape measure. The top has dimples with "d" and "n" markings for dometic and norcold. The installation is simple: remove the screws holding the old vent cap on, measure the distance between holes on the base and match them to the dimples in the new cap, drill 3/16" holes through the correct dimples, and finally, screw the new cap in place with the new screws that are provided. . There are a couple of brackets included that give you more mounting options if the dimple marks won't work.

M. Susan, Aquitaine

CAMCO 42160 REFRIGERATOR ROOF VENT COVER Benefit
Brand :    camco
Weight :    2.05 pounds
Model :    42160
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (camco product review) for Camco 42160 Refrigerator Roof Vent Cover available as-of ( Dec 2018 )
Price :    $15.24 (was $19.76)
  • Measures 34 x 10 x 3. 5
  • Fits dometic and newer norcold bases
  • Easy to use
  • Highly durable
  • Made from uv stabilized, durable polypropylene plastic

Custom Plastics 43 Polar White Plumbing Vent

Plumbing vent cap made of polypropylene. Overall diameter 5-1/4". Assembled height 3". Fits 1-1/4" to 1-1/2" vent stacks. Base and cap are included together. Color: polar white

Custom Plastics 43 Polar White Plumbing VentCustom-Plastics-43-Polar-Plumbing

CUSTOM PLASTICS 43 POLAR WHITE PLUMBING VENT Highlight
Brand :    custom plastics
Size :    Quantity 1
Weight :    0.20 pounds
Model :    43
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (custom plastics product review) for Custom Plastics 43 Polar White Plumbing Vent available as-of ( Dec 2018 )

Camco 25071 14 x 14 Universal Roof Air Conditioner Gasket Kit

Install a roof ac with confidence with this 14" x 14" universal roof air conditioner gasket kit, the best available. It includes a self-adhesive picture frame gasket and two self-adhesive foam leveling pads (7/8" x 1-7/16" x 18" and 5/16" x 1-7/16" x 18") for a universal fit.

Camco 25071 14 x 14 Universal Roof Air Conditioner Gasket KitCamco-25071-Universal-Conditioner-Gasket

CAMCO 25071 14 X 14 UNIVERSAL ROOF AIR CONDITIONER GASKET KIT Review
Brand :    camco
Weight :    0.71 pounds
Model :    25071
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (camco product review) for Camco 25071 14 x 14 Universal Roof Air Conditioner Gasket Kit available as-of ( Dec 2018 )
Price :    $4.85 (was $8.72)
  • Includes a self-adhesive picture frame gasket and two self-adhesive foam leveling pads
  • 14" x 14"
  • Dimensions 7/8" x 1-7/16" x 18" and 5/16" x 1-7/16" x 18"
  • Install roof ac with confidence
  • Universal fit

Ventmate 65528 Polar White Direct Replacement Dometic Refrigerator New Style Vent Lid

Ventmate refrigerator vent lid. Polar white color. Made of high impact plastic. Uv stabilized. This is a direct replacement lid for dometic new style refrigerator vents. Screw hole spacing measures approximately 21-11/16 by 4-1/2 . The overall dimensions of the cover are approximately 27-1/4 by 11 .

Ventmate 65528 Polar White Direct Replacement Dometic Refrigerator New Style Vent LidVentmate-65528-Replacement-Dometic-Refrigerator

VENTMATE 65528 POLAR WHITE DIRECT REPLACEMENT DOMETIC REFRIGERATOR NEW STYLE VENT LID Pros
Price :    $12.13 (was $21.95)
  • Direct replacement for dometic refrigerator vent lid
  • New style lid
  • Made of high impact plastic
  • Polar white color
  • Uv stabilized
Brand :    ventmate
Color :    Polar White
Size :    Quantity 1
Weight :    1.65 pounds
Model :    65528
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (ventmate product review) for Ventmate 65528 Polar White Direct Replacement Dometic Refrigerator New Style Vent Lid available as-of ( Dec 2018 )

Camco Vinyl Trim Insert UV Inhibitors Extended Life - Replace Cracked Stained RV Trim Inserts 1 x 100', White 25202

Bought this to replace the cracked and embrittled roof edge drip rail screw cover molding, on my camper. In comparing this new stuff, with the original, this looks very slightly thicker, and the edges have a taper which is a little sharper on the very edge, and widens to slightly wider, which results in easier insertion in the groove, and a nice secure fit. Something i did, and i recommend you do if you haven't already, is to replace the oem zinc plated screws. I used stainless steel screws with round heads, a quarter inch longer. I also used stainless steel washers. Just to be sure to keep out moisture, i spread a little clear polyseamseal on the threads so that a little squeezed up around the heads when they were snugged down. I smoothed out the excess. This molding is quite stiff and you need to have strong fingers to install it. I recommend you do it on a warm day, when it will be reasonably pliable. I had good luck pinching a few inches at a time, inserting it on the rail, and then pressing it into the grooves. I was obliged to use an old blade tip screwdriver to open up a few dented spots on the rail grooves to get it wide enough to accept the molding edges. The final result was very snug and secure, and looks very attractive. I am quite satisfied.

Camco 1" x 100' white vinyl trim insert is an easy-to-install replacement for cracked and stained trim inserts on aluminum roof edge, trim molding and truck camper shells. This vinyl trim insert is made with uv inhibitors which provide a longer life.

Camco Vinyl Trim Insert UV Inhibitors Extended Life - Replace Cracked Stained RV Trim Inserts 1 x 100', White 25202Camco-Vinyl-Insert-Inhibitors-Extended

Camco 25202 Vinyl Trim Insert 1 X 100', White (Auto Accessory) FAQ.

Installed on a jayco pop-up. Temps were in the high 60s and made the trim a little stiff and hard to put on with my hands. I grabbed a screen roller tool i had lying around and it went in like a dream. Seems like it could be a bit better quality material but overall i'm pleased. -Notice from K. Theresa, Centre

Click to Show camco 25202 vinyl trim insert 1 x 100', white (auto accessory) Details

This stuff is hard to work with as it's not very flexible, but once you get in the groove it fits great. I had to replace all the trim on my coachmen camper, and this did the job. It looks so much better than the yellowed and brittle trim i replaced. It's a nice shiny white - time will tell if it holds up well. Holding up nicely for the past 4 months.

Camco-25202-vinyl-trim-insert-1-x-100',-white-(auto-accessory) set picture

- T. RowePerfect replacement and very easy to install. Several of the vinyl pieces on my travel trailer had shrunk or become brittle and cracked. I didn't realize how poor of shape they were in until i saw how much stronger the vinyl is when new! i measured the width of my existing and bought the matching size. One could easily replace all their trim pieces in a few hours. . A couple notes:. Be absolutely certain you install it the proper direction. Just make note of how your current trim is and install this the same. Otherwise, it will easily fall out. Do not try to pull it tight or you will be replacing again even sooner. Every feet i would actually push it back against itself in the track to ensure it was bunched up and had plenty of room to allow for shrinking. I would also suggest buying some rv screws that are 1/4" longer than what is currently installed on your rv. If you find a rusted screw behind the vinyl trim, take it out and replace it while you have easy access.

I resealed my 2007 jayco 1206 pop up camper over the summer. I found that a lot of this vinyl trim had gotten brittle or browned over the years. So i decided to replace it. This was the best price around and it fit the channel perfectly. Just make sure to measure your channel as this comes in a couple of widths if i remember correctly. Cut to fit after installing then secure with a screw or caulk on t he ends. It helps if it's warm when you are installing it so that it can be molded easier. Installation in winter months could be difficult.

G. Nees, Colorado

CAMCO VINYL TRIM INSERT UV INHIBITORS EXTENDED LIFE - REPLACE CRACKED STAINED RV TRIM INSERTS 1 X 100', WHITE 25202 Summary
Price :    $8.84
  • Easy installation
  • Dimensions 1" x 100'
  • Contains uv inhibitors for longer life
  • Not for use on windows, entry doors, compartment doors or vents
  • Replace cracked and stained rv trim inserts
Brand :    camco
Color :    White
Weight :    1.10 pounds
Model :    25202
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (camco product review) for Camco Vinyl Trim Insert UV Inhibitors Extended Life - Replace Cracked Stained RV Trim Inserts 1 x 100', White 25202 available as-of ( Dec 2018 )

Camco Universal Vent Installation Kit Putty Tape- Use to Replace Install Roof Vents, Side Mount Vents Plumbing Stacks Refrigerator Vents 25003

Keep this product around or nearby for all your rv repair needs. Second only to duct tape, this product will help you seal up many a vent , replacement kit and anything else that sticks through your rv roof.

Use camco rv universal vent installation kit with putty tape to replace or install roof vents, side mount vents, plumbing stacks and refrigerator vents. The kit comes complete with screws, instructions and 1" x 8' putty tape for use with aluminum or other metal roofs. The screws included are 24 8 x 1" slotted hex head screws and 4 6 x 1/2" phillips head screws.

Camco Universal Vent Installation Kit Putty Tape- Use to Replace Install Roof Vents, Side Mount Vents Plumbing Stacks Refrigerator Vents 25003Camco-Universal-Installation-Refrigerator-25003

Camco 25003 Universal Vent Installation Kit Putty Tape (Auto Accessory) FAQ.

Great sealant tape for rv installations. -Notice from L. Pearce, Virginia

Click to Show camco 25003 universal vent installation kit putty tape (auto accessory) Details

This is an ideal purchase, since the vent we ordered did not include hardware. The only problem is that it was two screws short for my unit - which was not a problem since i had adequate replacements at hand. I especially liked the putty tape. After the tape was installed, i was able to mold the putty to cover certain gaps.

Camco-25003-universal-vent-installation-kit-putty-tape-(auto-accessory) set picture

- X. AlmaThis stuff has been around a long time. Easy to work with, peel off the tape, put it on, peel off the other side of tape. Of course its harder to work with if its cold, it may not compress enough. When done, take a putty knife on edge and remove any excess. Haven't had a leak yet, comes with basic screws that take a 1/4 inch nut driver.

Worked great

K. Paula, City of London

CAMCO UNIVERSAL VENT INSTALLATION KIT PUTTY TAPE- USE TO REPLACE INSTALL ROOF VENTS, SIDE MOUNT VENTS PLUMBING STACKS REFRIGERATOR VENTS 25003 Spotlight
Price :    $2.86 (was $3.37)
  • Screws: 24 8 x 1" slotted hex head screws and 4 6 x 1/2" phillips head screws included
  • Includes grey putty tape for aluminum or other metal roofs
  • Kit comes complete with screws and instructions
  • Replace or install roof vents, side mount vents plumbing stacks and refrigerator vents
Brand :    camco
Weight :    1.00 pounds
Model :    25003
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (camco product review) for Camco Universal Vent Installation Kit Putty Tape- Use to Replace Install Roof Vents, Side Mount Vents Plumbing Stacks Refrigerator Vents 25003 available as-of ( Dec 2018 )

Ventline 62334 White Plastic, Vent

Ventline plumbing vent. Made of plastic for 1-1/2 inch pipe. Removable cap. White.

Ventline 62334 White Plastic, VentVentline-62334-White-Plastic-Vent

VENTLINE 62334 WHITE PLASTIC, VENT Feature
Brand :    ventline
Color :    White
Size :    Quantity 1
Weight :    0.15 pounds
  • Ventline plumbing vent
  • White
  • Removable cap
  • Made of plastic for 1-1/2 inch pipe
Price :    $2.97 (was $7.80)
Model :    V2049-01
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (ventline product review) for Ventline 62334 White Plastic, Vent available as-of ( Dec 2018 )

Heng's 71111-C1G1 Standard Mount Universal Vent - White

Easy to install. The hardest part was getting all of the old sealant off. The only thing is that i ended up using the old vents molding on the inside because it was deeper than the one provided thus covering more of the opening.

Heng's standard mount universal vents feature a self-centering metal base with radius corners and an interior garnish with wider 1-1/4" flange. Designed to withstand excessive wind and weather. Covers all interior stains left by previous garnishes. Interchangeable with existing elixir and ventline products.

Heng's 71111-C1G1 Standard Mount Universal Vent - WhiteHengs-71111-C1G1-Standard-Mount-Universal

Heng's 71111-c1g1 Standard Mount Universal Vent - White (71111 c1g1) FAQ.

Good value. A great replacement for the original vent. The bottom trim requires a thicker roof for the installation. I made a trim out of pvc board and then installed the trim that came with the vent. The kit does not include any of the screws, be sure to safe the old ones or buy them before you start the installation. -Notice from X. Rowe, Wakefield

Click to Show heng's 71111-c1g1 standard mount universal vent - white (71111 c1g1) Details

This is your basic vent. It does not come with any installation hardware or butyl tape so you'll have to get that on your own. There is a installation kit from jr products on online store called "deluxe vent installation kit" that i would recommend as it comes with plenty of screws and butyl tape. There's another one that's cheaper but i think you'll come up short on the screws. You could always reuse the ones from the vent you're replacing, but i like to put in new screws. Installation was pretty easy and you can follow a video on youtube called "how to install & seal an rv roof vent" for a detailed installation. You'll also need some self leveling dap roof sealant. I ended up using a full tube as i'm pretty generous when sealing. Other than that, it's pretty straight forward. It hasn't leaked yet and we've been through a decent rain storm.

Heng's-71111-c1g1-standard-mount-universal-vent---white-(71111-c1g1) set picture

- J. BertieHave installed 3 of these heng's vents so far with no problems. The hardest part of the installation was scraping off the old roof sealer to gain access to the old mounting screws. Once everything is scraped and cleaned, the new vent goes on easily. Hint: before you put in the first screw, make sure the vent is centered over the opening. Test fit the inside flange to see if the vent is centered in the inside flange when looking up at the vent from inside the rv. There is a very good youtube video on vent installation by dicor lap sealants. I used dicor on all 3 vent installations with excellent results. Search youtube: "how to install and seal an rv roof vent using dicor lap sealants". . Only gave this item 4 stars because the overall quality of roof vents in general has come down over the years. (thinner plastic thinner aluminum. ). . Update: after less than 2 years in the nevada sun, the plastic covers have cracked. I just replaced the original plastic covers with "heng's 90114-1 14" universal metal roof vent cover". These are available on online store and are easy to install. No more cracked plastic covers! to be clear - you just get the metal cover nothing else. If you live in a 'sunshine area' you might consider buying a metal cover along with the 69632 roof vent kit. Swap out the plastic cover for the metal one right away before installing. The plastic covers really are thin and are not uv proof. The metal covers make it darker inside, but it's worth the piece of mind knowing the covers are intact and secure. I'd hate to be in a hail storm with those plastic covers! . . July 2018 update: some minor rust is starting appear on the covers. The rust is not a concern at this point. Rain started to drip through a cross bar rivet on one metal cover. A few dabs of silicone sealed the all rivets. Inspect the metal covers before installation. If any of the crossbar rivets look deformed or crooked, put some sealer on the rivets to avoid a leak problem later on.

. Had a vent that was about exactly like this one, and my trailer was built in 1969. . Unscrewed the beauty plate from the inside, banged out the top enough to use an inside stool to chip away from roof top the lining - after removing the screws from top side - and after scraping down roof - applying a new tube sealant to inside of new unit, re-using original screws - different hole placement, it was easy peasy seriously start to finish about 40 min. . My trailer is old messy with issues, but this made it nice. $20 and sealant and done. . On the spot at the site. No power used.

G. Cassella, Poole

HENG'S 71111-C1G1 STANDARD MOUNT UNIVERSAL VENT - WHITE Feature
Price :    $22.47
  • Positive-seal weather stripping and watertight
  • Fits 14" x 14" opening
  • Galvanized metal base: non-powered
  • Color: white
  • Designed to withstand excessive wind and weather. standard mount universal vents feature a self-centering metal base with radius corners and an interior garnish with wider 1-1/4 inch flange
Brand :    heng's
Color :    Pure white
Size :    14 Inch x 14 Inch
Weight :    4.00 pounds
Model :    71111-C1G1
Quantity :    1
Order click here :    normally ships in 1-2 business days
Automotive Parts And Accessories :    Best Auto Accessory (heng's product review) for Heng's 71111-C1G1 Standard Mount Universal Vent - White available as-of ( Dec 2018 )

camco 42161 refrigerator vent base white Price : 8.81, was : 0 as 2018-11-08
USUKDEFRESITJPCNCAGlobal
United States
Great Britain
German
France
Spain
Italy
Japan
China
Canada
World Wide
Camco 42161 Refrigerator Vent Base White (Auto Accessory) Reviewed by on jerdus.com

Top camco 42161 refrigerator vent base white (auto accessory) Content

The F.A.Q. for camco 42161 refrigerator vent base white

Perfect fit description was correct

A number of questions have been asked here.

Q&A

(0) Question: My fridge opening on top of my rv is 24 x 6 . will this base work ok?


(1) Question: What are the dimensions of this screen? thank you.


(2) Question: Will this work with vent mate 65528 cover ?


(3) Question: I need a new vent base, existing base is 27" x 5-1/4". what is the closest thing you have that size? i haven't been able to find an exact replacement.


(4) Question: Is this the right base for the ventmate? my old one looks like this but has a 3/4 lip on the sides near the top to help block the rain


(5) Question: Hi, does the item include a cover? thank you.


(6) Question: What are the dimensions from screw hole to screw hole?



(note) Question: where/how to get Camco (manufacturer's brand) accessories & similiar Camco's products

Answer:

Click the marked text to copy link to Clipboard

We had to replace several leaking vents in a used rv we purchased. Camco is generally our first check point on products. This product fit perfectly and was super easy to install. I am not mechanically inclined or mrs. Fix it but i was able to put this in and no leaks after!


Appliances 110592551, Appliances, Heating, A/C & Ventilation 110782551, Automotive 18148651, RV Parts & Accessories 1109108522Top Camco 42161 Refrigerator Vent Base White (Auto Accessory) FAQ Content

Best camco 42161 refrigerator vent base white (auto accessory) in review

Works great!

X. Meredith, Colorado

You might like to see Dowco Swingarm Bag: Black, Fits Dual Shock Bikes/sportster/yamaha Bolt, 9 Liter Willie & Max Synthetic Leather Swing Arm Bag For Sportster Offers A No-nonsense, Clean Look That Doesn't Take Away From The Look Of Your Bike. This Bag Is Ideal For Bikes A Dual Shock. -Willie & Max Dowco 59778-00 Synthetic Leather Swingarm Bag: Black, Fits Dual Shock Bikes/sportster/yamaha Bolt, 9 Liter Capacity
  1. Advantages: The Back Of The Bag Is A Rigid Abs Plastic To Help The Bag Keep Its Shape. Durable Swingarm Bag Construction Uses Black Synthetic Leather And Chrome Buckles With Quick-disconnect Buckles Hidden Under The Straps. Includes Three Leather Mounting Straps With C.
  2. Advantages: Slots Are Pre-cut In The Back Of The Bag For Installation Using Leather Straps. Includes Two Pieces Of Clear Vinyl Film To Help Protect The Paint On Your Motorcycle. Intended To Be Mounted On The Left Side Of The Motorcycle. Exterior Dimensions: 10. 5" X 11. 5.
Cheap Willie Max 59778 00 Synthetic Swingarm (Auto Accessory) 59778 00 Willie Max 59778 00 Synthetic Swingarm (Auto
Or you might like to consider Season black waterproof sun motorcycle cover,fits up to 108 motors xx large & whether you drive a cruiser, "crotch rocket" or moped, it's important to keep your motorcycle clean and safe from the weather above. when you leave your motorcycle parked outside out -xyzctem season black waterproof sun motorcycle cover,fits up to 108 motors xx large & lockholes
  • Extras: Quality Materials-made Of 210d Oxford Fabric With Pu Materials, Which Is Non Abrasive And Mildew Resistant, Water Repellent, Lightweight And Super Soft.
  • Extras: Improved Weather Protection -protect Your Motorcycle Against Rain, Dust, Heat, Tree Sap, Damaging Uv Rays & Inclement Weather With Top To Bottom Coverage.
Best Buy Xyzctem Season Waterproof Motorcycle Lockholes (Powersports Vehicle Part) Xyzctem 210 Xyzctem Season Waterproof Motorcycle Lockholes (xyzctem

Q. Sally, Colorado says

Product was as described and works perfectly.

J. Marguerite, Virginia

Worked great

A. Donna, Florida says

Fit my 2006 keystone springdale. Good price. Not easy job to install because getting the old one out is a chore. I used a heat gun and plastic scrapper. So know what you are getting into. Watch you tube video

I. Patricia, Ohio

Fits perfectly, and easy to install.

W. Wimbish, Harrow says

Ordered to replace a broken one on rv rooftop. It was a bit challenging to remove the old one but once that was done, i had no problem installing this new vent. I used self leveling sealant to cover the bottom of the vent and it really looks professional. I finished installing just before rain hit the area and so far no leaks. I am glad that online store sells all the items that i needed to repair the rv, saved me so much money that i would have been charged by a service man, especially since it's located inside a ranch on the outskirts of town. Great product, recommend if you need to replace on your rv.

L. Gina, Rhode Island

Fit mine perfect. 2000 minnie winnie. Very easy to install and worked great!

K. Guest, Oklahoma says

Works perfectly on our eagle cap camper.

Z. Brenda, Haringey

As shown, with a good price and fast shipping, better than the oem item it replaced. Easy to install, should last a lot longer than the original one.

U. Jennifer, Montana says

Bought this base and cover to replace an old metal one on my camper that occasionally leaked during heavy rain. I have had a few heavy downpours this summer, and being lower to roof seems to work great. The base was easy to install. A little larger than my metal one, which is great; centered over the hole and put putty strips down, and screwed it in place. Hopefully it will hold up.

X. Yvette, Nebraska

Several mounting hole options means it will install easy. Works great. As always, a good purchase from online store

G. Bullock, Limousin says

As described

Q. Lara, Newfoundland and Labrador

These are as good as you'd get at an rv center.



Leave a Reply

You must be logged in to post a comment.


Top refrigerator vent base Review Content

Related Products

Product Image Gallery

Top-camco-42161-refrigerator-vent-white-565302ouiyw0-Content