Camco Cleaning Aerodynamic Included 40431 (Auto Accessory) 5654

Review for rv roof vent cover opens easy

Price was $20.85. Great purchase for my fifth wheel. Although it was on my list of items to do, i didn't install this until i had to start paying for electricity in my trailer. I could immediately feel the difference in the bathroom, the dark cover definitely dropped the temperature during the sunny parts of the day. The exhaust can also be used when it is raining outside now as this blocks any water from entering the trailer. . It was fairly easy to install, my trailer was set up to install one of these so i didn't have to drill any holes. It was a small space and a little difficult to start the hardware but other than that, simple and quick. . Definitely recommend for every trailer, whether or not you pay for electricity. . Update: this has been in use through the summer, about four months. I have left it open many times during rain, some very heavy. I have not noticed any rain enter the rv at all.

-N. Lawrence

Rv Roof Vent Cover, Opens Easy Cleaning, Aerodynamic Design, Easily Mounts To Rv Included Hardware The Camco Vent Cover Is Designed To Allow Fresh Air Ventilation And Light Into Your Rv, Rain Or Shine. It Offers High Flow Ventilation In An Aerodynamic Design. Can Be Installed Easily -Camco Rv Roof Vent Cover, Opens Easy Cleaning, Aerodynamic Design, Easily Mounts To Rv Included Hardware White 40431

  1. Add-on: Features Removable Louvers For Easy Cleaning.
  2. Add-on: Aerodynamic Styling.

Affordable Camco Cleaning Aerodynamic Included 40431 (Auto Accessory) 40431

Buy Now

Introduction

I have problems this thing can't solve-like my vents don't open because the previous owner rubber roofed them shut? nevertheless, they both leaked! this mounted easily, we caulked it in, and there has been no more leaking whatsoever. The ceiling is torn apart for repair and insulation, so this has been verified in driving rain repeatedly. It looks nice on the roof. My only complaint is that the silver is too dark. I used to have a wonderful skylight in the kitchen even if i couldn't open the vent. Now, it's so dark that i don't even bother to take the insulation pillow out of it anymore. :( these were a temporary fix until the roof could be redone, but i'm not sure how temporary it will really be. . Look fantastic, works as intended, buy white if you still want light, though. Best rv roof vent cover opens easy | Camco-Auto Accessory Review as-of ( Dec 2018 ) Add-on Camco RV Roof Vent Cover, Opens For Easy Cleaning, Aerodynamic Design, Easily Mounts to RV With Included Hardware (White) (40431) Allows you to leave the vent open during rain or shine. Features removable louvers for easy cleaning. Aerodynamic styling. Uv stabilized resin for years of rugged use. Replacement screen available (camco 40439) .

Camco rv roof vent cover, opens for easy cleaning, aerodynamic design, easily mounts to rv with included hardware white 40431 Review (40431)

Great price on cover, easy 30 minute install, very simple. Mark cover holes with pencil on roof, align brackets with these marks closest to the corners of the metal frame, set brackets on which ever of the marks works best, then mark and drill 4 holes in rv's vertical metal frame and attach with supplied hardware. You can't open your vent as much as without the cover but it does open more than enough to allow good ventilation so not much of a big deal. Im hearing complaints on longevity and sun rot making its useful life short so obviously this is not made of uv resistant material and living in arizona the sun can destroy things very quickly. I roughed up the surfaces and painted the attachment points and all around the lower 3" portion of the cover with a good quality spray paint. This will hopefully form a shield from the sun on the most critical places that break which are the critical attachment points. I may update revue and stars down the road to see if this simple fix worked. -J. Zelda

Camco Cleaning Aerodynamic Included 40431

  • Order: Automotive
  • Brand: Camco
  • ClothingSize: Standard
  • Color: White
  • EAN: 8850273112243
  • Product Dimensions:
    Height:10.00 inches
    Length:18.00 inches
    Weight:0.12 pounds
    Width:19.00 inches
  • Manufacturer: Camco
  • Warranty-Part: Limited 1 Year Warranty
  • Model: 40431
  • MPN: 40431
  • Total: 1
  • Quantity: 1
  • Part/Serial Number: 40431
  • Sub-Type: Automotive Parts And Accessories
  • Category: AUTO ACCESSORY
  • ReleaseDate: 2005-10-19
  • Size: Standard
  • UPC: 014717404310
  • Warranty: 1 Year Against Manufacturing Defects

rv roof vent cover, opens easy cleaning, aerodynamic design, easily mounts to rv included hardware Automotive Parts And Accessories, The camco vent cover is designed to allow fresh air ventilation and light into your rv, rain or shine. it offers high flow ventilation in an aerodynamic design. can be installed easily by mounting to the existing 14" x 14" roof vent. vent cover made of rugged uv stabilized resin with removable louvers for easier cleaning. mounting hardware included. Camco Cleaning Aerodynamic Included 40431 (40431-Camco).

Camco Cleaning Aerodynamic Included 40431 Automotive Parts And Accessories

rv roof vent cover opens easy Camco RV Roof Vent Cover, Opens For Easy Cleaning, Aerodynamic Design, Easily Mounts to RV With Included Hardware (White) (40431) (Switch to Mobile/Desktop Version)

Item was easy to install make sure to have small drill bit to tap for bolt assembly. Rained very hard other night no leaks with vents wide open. . Make sure you don't over tighten i can see where the plastic tabs could get brittle with sun beating down on it. If you are worried about sun spray can of plasti dip paint with your color choice and that will hold the sun at bay.

Camco Rv Roof Vent Cover, Opens Easy Cleaning, Aerodynamic Design, Easily Mounts To Rv Included Hardware White 40431
Click to see NoticeCamco Cleaning Aerodynamic Included 40431 (Auto Accessory)"Finally got these installed and it was a breeze to do. Well constructed, easy to follow directions and look good. I prepped and painted the inside of our with a black spray paint. This gave the outside appearance of being grey that matched our 5th wheel great. It also blocks out the majority of the sunlight and associated heat allowed inside. . They do not allow for the vents to open all the way to the full position, but then there is really no need to do that to begin with. It does allow the vents to open maybe two thirds of the way which is plenty. One feature that i do like is the front screened grill can be removed to clean out any leaves, bugs or wasp that find it's way up into the cover. . Nice feature is that the only holes that need to be drilled are not drilled into the roof itself. Nor do you have to remove any of the vent screws that are anchored into the roof. It is nice to have someone to assist you with the installation so you don't have to climb up and down off of the rv. All you need this other person to do is to adjust the open and close the vent a few times to allow for working room when tightening a few screws and nuts. . All in all, a piece of cake to install."


Gable Vents » Roof Vents » Soffit Vents » Camco Cleaning Aerodynamic Included 40431 (Auto Accessory) 40431


ACCEL 9001C Extreme 9000 Universal Ceramic Spark Plug Wire

Expensive but a high quality product.

Accel's extreme 9000 ceramic wire sets make burnt plug-wire boots a thing of the past. Not enough room in your engine bay? not enough room to work around your headers? no problem the ceramic boots on the spark plug end of these specially designed wire kits withstand temperatures up to 2; 000 degrees fahrenheit. The ceramic coating acts as a heat mirror; reflecting infrared energy and heat away from the plug boot; and it's engineered to resist flaking and peeling. 8mm ferro-spiral core double-silicone wires deliver maximum energy to the spark plugs with built-in rfi/emi suppression for street-driven vehicles. Already cut to factory length; these ultra-high temperature wires are rated at 600 degrees fahrenheit; have 500-ohms/ft. Resistance; feature stainless-steel terminals; and come with 90-degree ceramic boots.

ACCEL 9001C Extreme 9000 Universal Ceramic Spark Plug WireACCEL-9001C-Extreme-Universal-Ceramic

Accel 9001c Extreme 9000 Universal Ceramic Spark Plug Wire (acc 9001c) FAQ.

Outstanding quality, the ceramic ends look and work great. Put them on with clean hands. -Notice from Q. Betty, Massachusetts

Click to Show accel 9001c extreme 9000 universal ceramic spark plug wire (acc 9001c) Details

Solved a long time misfire problem because all other boots burn through and caused an arc against the headers after a few miles.

Accel-9001c-extreme-9000-universal-ceramic-spark-plug-wire-(acc-9001c) set picture

- B. JarvisThe ceramic boot on these wires is a great idea! if you have a car that has an issue with header clearances then this is the wire for you. I went through several sets of ignition wires before finding these. Some of the boots are only 1/4" away from the header tubes and are standing up to the heat without cracking. There were a couple things i didn t like about these wires, one was the fact that the boot at the distributor was 90 degrees where i would ve prefered a straight boot. The supplied crimping tool was also nearly impossible to use. Those shortcomings aside, the wires do what they were designed to do well.

Great item to have in your car if you have headers on it. Problem was getting a set that was not broken at the tip. Three times is a charmer with online store, that is how many times it had to be delivery, then i ordered a set for a friend and the same again, returned and gave up.

F. Allen, Yukon Territory

ACCEL 9001C EXTREME 9000 UNIVERSAL CERAMIC SPARK PLUG WIRE Highlight
Brand :    accel
Color :    Black
Model :    ACC 9001C
Quantity :    1
Order click here :    normally ships in 24 hours
  • Eliminates burned or melted plug wires
  • Ceramic boots withstand temperatures up to 2000 degrees fahrenheit
  • Comes with 90 degree ceramic boots
  • Reflects heat away from the plug boot with no flaking or peeling
  • Wires are rated at 600 degrees fahrenheit and come already cut to factory length
Price :    $101.95
Automotive Parts And Accessories :    Best Auto Part (Automotive Parts And Accessories product review) for ACCEL 9001C Extreme 9000 Universal Ceramic Spark Plug Wire available as-of ( Dec 2018 )

HENG'S 14 RV CAMPER TRAILER UNIVERSAL WHITE ROOF VENT W 12V 12 VOLT FAN 71112-C NO GARNISH RING INCLUDED

Strong fine mesh screen extra strong galvanized steel roof flange with mill finish dimensions 8. 5" round x 1. 5" deep vent color is white will replace existing elixir or ventline products (please check the hinge style before ordering). Includes 28 screws and 70" of butyl tape for mounting your roof vent. Standard oem dimensions (opening 14. 5" x 14. 5") mounting flange (16. 5" x 16. 5") * garnish ring is not included *

HENG'S 14 RV CAMPER TRAILER UNIVERSAL WHITE ROOF VENT W 12V 12 VOLT FAN 71112-C NO GARNISH RING INCLUDEDTRAILER-UNIVERSAL-71112-C-GARNISH-INCLUDED

HENG'S 14 RV CAMPER TRAILER UNIVERSAL WHITE ROOF VENT W 12V 12 VOLT FAN 71112-C NO GARNISH RING INCLUDED Spotlight
Brand :    heng's
Size :    1 Pack
Weight :    5.00 pounds
Model :    1
Quantity :    1
Order click here :    normally ships in 1-2 business days
  • Vent color is white
  • * garnish ring is not included *
  • Strong fine mesh screen
  • Extra strong galvanized steel roof flange with mill finish
  • 12 volt fan with 6" blades
Price :    $27.99
Home Improvement :    Best Building Material (heng's product review) for HENG'S 14 RV CAMPER TRAILER UNIVERSAL WHITE ROOF VENT W 12V 12 VOLT FAN 71112-C NO GARNISH RING INCLUDED available as-of ( Dec 2018 )

Heng's 71111-C1G1 Standard Mount Universal Vent - White

Our 10 year old motor home had cracked vents and this appeared to be an identical replacement. It comes with the interior trim ring. It does not come with screws or butyl tape to seal the vent to the roof (like the powered fan vent i bought). Of course, you'll need the caulking, so buy some tape as well, and maybe reuse your screws. There's nothing special about this vent. The original lasted 10 years and we'll hope this one does as well.

Heng's standard mount universal vents feature a self-centering metal base with radius corners and an interior garnish with wider 1-1/4" flange. Designed to withstand excessive wind and weather. Covers all interior stains left by previous garnishes. Interchangeable with existing elixir and ventline products.

Heng's 71111-C1G1 Standard Mount Universal Vent - WhiteHengs-71111-C1G1-Standard-Mount-Universal

Heng's 71111-c1g1 Standard Mount Universal Vent - White (71111 c1g1) FAQ.

Good value. A great replacement for the original vent. The bottom trim requires a thicker roof for the installation. I made a trim out of pvc board and then installed the trim that came with the vent. The kit does not include any of the screws, be sure to safe the old ones or buy them before you start the installation. -Notice from X. Rowe, Wakefield

Click to Show heng's 71111-c1g1 standard mount universal vent - white (71111 c1g1) Details

I took the roof air conditioner off our vintage little travel trailer and ordered this to fill the hole. It was slightly smaller than the 14" standard hole left by the air conditioner, but it works. It looks so much nicer than that old, huge, eyesore. Brightens up the whole trailer. So far so good as far as how it opens and shut. We just had a storm a couple of nights ago and no leaks. One slight problems. It does not come with the sealant installation kit/screws, even though the box mentions the sealant, as if it's included. Because a few other customers mentioned it, i had ordered an installation kit, so all's well that ends well. I'm 63 years young (and a female), and it was pretty easy for me to install this thing. I watched a video on utube on how to install it, which made it pretty simple. Just be sure to face the open side towards the back of your trailer (hinged side facing front).

Heng's-71111-c1g1-standard-mount-universal-vent---white-(71111-c1g1) set picture

- G. Cassella. Had a vent that was about exactly like this one, and my trailer was built in 1969. . Unscrewed the beauty plate from the inside, banged out the top enough to use an inside stool to chip away from roof top the lining - after removing the screws from top side - and after scraping down roof - applying a new tube sealant to inside of new unit, re-using original screws - different hole placement, it was easy peasy seriously start to finish about 40 min. . My trailer is old messy with issues, but this made it nice. $20 and sealant and done. . On the spot at the site. No power used.

Easy to install. The hardest part was getting all of the old sealant off. The only thing is that i ended up using the old vents molding on the inside because it was deeper than the one provided thus covering more of the opening.

C. Olga, Georgia

HENG'S 71111-C1G1 STANDARD MOUNT UNIVERSAL VENT - WHITE Features
Brand :    heng's
Color :    Pure white
Size :    14 Inch x 14 Inch
Weight :    4.00 pounds
  • Positive-seal weather stripping and watertight
  • Galvanized metal base: non-powered
  • Designed to withstand excessive wind and weather. standard mount universal vents feature a self-centering metal base with radius corners and an interior garnish with wider 1-1/4 inch flange
  • Fits 14" x 14" opening
  • Color: white
Price :    $22.47
Model :    71111-C1G1
Quantity :    1
Order click here :    normally ships in 1-2 business days
Automotive Parts And Accessories :    Best Auto Accessory (heng's product review) for Heng's 71111-C1G1 Standard Mount Universal Vent - White available as-of ( Dec 2018 )

Ventmate 65528 Polar White Direct Replacement Dometic Refrigerator New Style Vent Lid

Ventmate refrigerator vent lid. Polar white color. Made of high impact plastic. Uv stabilized. This is a direct replacement lid for dometic new style refrigerator vents. Screw hole spacing measures approximately 21-11/16 by 4-1/2 . The overall dimensions of the cover are approximately 27-1/4 by 11 .

Ventmate 65528 Polar White Direct Replacement Dometic Refrigerator New Style Vent LidVentmate-65528-Replacement-Dometic-Refrigerator

VENTMATE 65528 POLAR WHITE DIRECT REPLACEMENT DOMETIC REFRIGERATOR NEW STYLE VENT LID Feature
Brand :    ventmate
Color :    Polar White
Size :    Quantity 1
Weight :    1.65 pounds
Model :    65528
Quantity :    1
Order click here :    normally ships in 24 hours
  • Direct replacement for dometic refrigerator vent lid
  • New style lid
  • Made of high impact plastic
  • Polar white color
  • Uv stabilized
Price :    $12.13 (was $21.95)
Automotive Parts And Accessories :    Best Auto Accessory (ventmate product review) for Ventmate 65528 Polar White Direct Replacement Dometic Refrigerator New Style Vent Lid available as-of ( Dec 2018 )

Cynder 2020 Universal Lid Impact-Resistant Rv Camper Motorhome Trailer Roof Air Vent Cover Vortex Vent Fan, Vent Line, Elixir White

One per pack. Fits most vents including elixir and ventline. Color is white. Comes preassembled and is impact-resistant.

Cynder 2020 Universal Lid Impact-Resistant Rv Camper Motorhome Trailer Roof Air Vent Cover Vortex Vent Fan, Vent Line, Elixir WhiteCynder-Universal-Impact-Resistant-Motorhome-Trailer

CYNDER 2020 UNIVERSAL LID IMPACT-RESISTANT RV CAMPER MOTORHOME TRAILER ROOF AIR VENT COVER VORTEX VENT FAN, VENT LINE, ELIXIR WHITE Featured
Brand :    cynder
Color :    White
Weight :    1.00 pounds
Model :    02020
Quantity :    1
Order click here :    normally ships in 24 hours
  • Helps cut down on condensation inside your rv
  • Fits standard 14" x 14" opening
  • Height 1. 02" ( 2. 6cm)
  • Easy, quick, and simple installation
  • Polypropylene (impact-resistant)
Price :    $19.99 (was $21.80)
Automotive Parts And Accessories :    Best Auto Accessory (cynder product review) for Cynder 2020 Universal Lid Impact-Resistant Rv Camper Motorhome Trailer Roof Air Vent Cover Vortex Vent Fan, Vent Line, Elixir White available as-of ( Dec 2018 )

Dicor 501LSW-1 Self-Leveling Lap Sealant, 4 Pack

4 pack dicor rubber roof sealant

Dicor 501LSW-1 Self-Leveling Lap Sealant, 4 PackDicor-501LSW-1-Self-Leveling-Sealant-Pack

DICOR 501LSW-1 SELF-LEVELING LAP SEALANT, 4 PACK Overview
Brand :    dicor
Weight :    4.00 pounds
Model :    501 - LSW6
Quantity :    4
Order click here :    normally ships in 1-2 business days
Automotive Parts And Accessories :    Best Auto Accessory (dicor product review) for Dicor 501LSW-1 Self-Leveling Lap Sealant, 4 Pack available as-of ( Dec 2018 )

Camco RV Vent Insulator And Skylight Cover With Reflective Surface, Fits Standard 14 RV Vents 45192

I Have Used These In My Vents For Years On Different Rvs And They Always Stayed In Place Nice And Flush In Vent. They Really Insulate The Heat From That Vent Area And Work Nice For Pillow At A Ball Game To Sit On Not With Added Plastic Insulator They Now Added. I Thought They Were Great But They Have Recently Added Another Section To It And Now It Sits All Crunched Up And Not Very Attractive In Vent Not A Good Fit At All. It Stays In Place And I Assume Will Work Doing What Its Intended For But Looks Terrible Like I Stuffed An Oversized Pillow In The Vent. I Usually Dont Send Products Back But This Was Not Worth It I Have A Nice Motorhome Dont Need It Looking Bad From The Ceiling Vents. Online Store Refunded Me In Full. I Love Online Store Its My Favorite Place To Shop And Do A Lot! Update 6-23-13. I Did Find In Walmart The Original Design That Worked Great That Is Similar To This But Without The Added Plasic. Walmart Has The Great Fitting Old Style For Like 9. 00 In Rv Section In Autoparts. I Have Not Seen Online Store Carry This Old Style. The Older Style Fit And Stayed Great!

Camco rv vent insulator with reflective surface fits snugly in rv vent opening with a full 2. 75" of foam to help stop heat transfer, keeping your rv cooler in summer and warmer in winter. Reflective surface blocks 100% of the sun's damaging rays. Fits standard 14" rv vents.

Camco RV Vent Insulator And Skylight Cover With Reflective Surface, Fits Standard 14 RV Vents 45192Camco-Insulator-Skylight-Reflective-45192

Camco 45192 Sunshield Vent Insulator Reflective Surface (Auto Accessory) FAQ.

We Wanted To Darken Up Our Rv So We Could Sleep In And Also Keep Out The Unwanted Solar Heat. It's Been Over 100 This Week And Our A/c Wasn't Keeping Up. When I Reached Up To Open A Vent And Let Some Heat Out It Felt Like I Was Sticking My Hand Into An Oven. The Vent Area Was Creating A Lot Of Heat. We First Bought The Camco 45191 Rv Sunshield Vent Cover Which Is Essentially A Piece Of Tinfoil-coated Bubble Wrap That Sticks On With Sticky Velcro Tabs. As Soon As The Sun Heat Up The Covers For About An Hour The Velcro Glue Let Go And They Fell Off. This "pillow" Style Vent Insulator Works Much Better. It Is Essantially A Foam Pillow That Feels Like Fake Sheepskin On One Side And Has That Same Chrome Covered Sunshield On The Other. They Come With Velcro Tabs On Them But After My Experience With The Other Covers I Didn't Use Those. I Just Stuffed Them Up In The Vent Boxes And They Stay. It Completely Blocks Out The Sun And The Heat At The Ceiling Around The Vent Is Gone. The Only Downside I See Is Pulling It Out To Use The Bath Fan But A Worthwhile Tradeoff. Great Product! -Notice from Z. Lisa, South Australia

Click to Show camco 45192 sunshield vent insulator reflective surface (auto accessory) Details

I Bought Two Of These This To Block Out Light (i Like To Sleep In) And It Does The Trick. Also It Does A Great Job Of Insulating Out The Heat In Summer As Well As Keeping Heat In For Those Winter Camping Trips. Very Snug Fit So You Don't Even Have To Use The Velcro Tabs That Come With It. Blends In Well With My Rv Ceiling. Hint: Crack Open The Vent About 1 Inch In The Summer To Let The Heat Escape And Save The Plastic Vent From Getting Too Hot.

Camco-45192-sunshield-vent-insulator-reflective-surface-(auto-accessory) set picture

- X. MaysThese Vent Insulators Are Amazing. It Really Helps Keep The Trailer Cool Or Warm. We Were Camping In The Dessert And During The Day It Is Hot And The Night Is Cold So Being Able To Help Control The Temperature Inside Of The Trailer Is Great. The Vent Fits Perfectly In Our Weekend Warrior And We Are So Happy That We Purchased This. **if You Find This Review Helpful Please Click Yes To Let Me Know. If You Have Any Questions Just Ask! :)**

The Camco Rv Vent Insulator Has One Side That Has The Aluminum Shiny Surface And The Other Side Cloth. It Was Easy To Put It Into Place Simply By Pushing It Up Into The Vent. I Did Not Need To Use The Velcro Attachment Tags That It Came With. I'm Using It To Hold In The Heat At Night And Keep Out The Cold. It Works Good For That.

Y. Patton, Stockton-on-Tees

CAMCO RV VENT INSULATOR AND SKYLIGHT COVER WITH REFLECTIVE SURFACE, FITS STANDARD 14 RV VENTS 45192 Feature
Brand :    camco
Weight :    0..53 pounds
Model :    45192
Quantity :    1
Order click here :    -
Automotive Parts And Accessories :    Best Auto Accessory (camco product review) for Camco RV Vent Insulator And Skylight Cover With Reflective Surface, Fits Standard 14 RV Vents 45192 available as-of ( Dec 2018 )
Price :    $9.36 (was $14.99)
  • Keep your rv cooler in the summer and warmer in the winter
  • Durable and easy to store
  • Reflective surface blocks the sun's damaging rays
  • Full 2. 75" of foam to help stop heat transfer
  • Fits standard 14" rv vents

Camco Universal Vent Installation Kit Putty Tape- Use to Replace Install Roof Vents, Side Mount Vents Plumbing Stacks Refrigerator Vents 25003

Good sticker tape for all use to seal window, tv ant or what you need.

Use camco rv universal vent installation kit with putty tape to replace or install roof vents, side mount vents, plumbing stacks and refrigerator vents. The kit comes complete with screws, instructions and 1" x 8' putty tape for use with aluminum or other metal roofs. The screws included are 24 8 x 1" slotted hex head screws and 4 6 x 1/2" phillips head screws.

Camco Universal Vent Installation Kit Putty Tape- Use to Replace Install Roof Vents, Side Mount Vents Plumbing Stacks Refrigerator Vents 25003Camco-Universal-Installation-Refrigerator-25003

Camco 25003 Universal Vent Installation Kit Putty Tape (Auto Accessory) FAQ.

Worked great -Notice from K. Paula, City of London

Click to Show camco 25003 universal vent installation kit putty tape (auto accessory) Details

This is an ideal purchase, since the vent we ordered did not include hardware. The only problem is that it was two screws short for my unit - which was not a problem since i had adequate replacements at hand. I especially liked the putty tape. After the tape was installed, i was able to mold the putty to cover certain gaps.

Camco-25003-universal-vent-installation-kit-putty-tape-(auto-accessory) set picture

- A. MorganKeep this product around or nearby for all your rv repair needs. Second only to duct tape, this product will help you seal up many a vent , replacement kit and anything else that sticks through your rv roof.

This stuff has been around a long time. Easy to work with, peel off the tape, put it on, peel off the other side of tape. Of course its harder to work with if its cold, it may not compress enough. When done, take a putty knife on edge and remove any excess. Haven't had a leak yet, comes with basic screws that take a 1/4 inch nut driver.

X. Alma, Wyoming

CAMCO UNIVERSAL VENT INSTALLATION KIT PUTTY TAPE- USE TO REPLACE INSTALL ROOF VENTS, SIDE MOUNT VENTS PLUMBING STACKS REFRIGERATOR VENTS 25003 Advantages
Brand :    camco
Weight :    1.00 pounds
Model :    25003
Quantity :    1
Order click here :    normally ships in 24 hours
  • Screws: 24 8 x 1" slotted hex head screws and 4 6 x 1/2" phillips head screws included
  • Includes grey putty tape for aluminum or other metal roofs
  • Kit comes complete with screws and instructions
  • Replace or install roof vents, side mount vents plumbing stacks and refrigerator vents
Price :    $2.86 (was $3.37)
Automotive Parts And Accessories :    Best Auto Accessory (camco product review) for Camco Universal Vent Installation Kit Putty Tape- Use to Replace Install Roof Vents, Side Mount Vents Plumbing Stacks Refrigerator Vents 25003 available as-of ( Dec 2018 )

Fan-Tastic Vent 801200 RV Roof Vent ABS LID Vent Create-A-Breeze 3-Speed Manual Crank ABS Smoke Dome

About fan-tastic vent: fan-tastic vent was chartered as a stock corporation in 1984 and in 1985 began production of a 12-volt high efficiency ceiling fan in burton, michigan. In its first year the company employed 4 people and built approximately 2, 000 fans. As sales continued to grow, the company moved to a larger facility in capac, michigan, in 1995. In an unfortunate turn of events, a devastating fire followed the move in january of 1997, resulting in a total loss. Incredibly, the company rebounded much faster than the industry or the community anticipated. In just eleven days fan-tastic vent was able to resume production. In 2010, fan-tastic vent was acquired by atwood mobile products llc, a leading supplier to the recreation vehicle industry. Today fan-tastic vent continues to be one of the most recognized brand names in the industry and has sold over 3 million fans.

Fan-Tastic Vent 801200 RV Roof Vent ABS LID Vent Create-A-Breeze 3-Speed Manual Crank ABS Smoke DomeFan-Tastic-Vent-ABS-LID-Create-

FAN-TASTIC VENT 801200 RV ROOF VENT ABS LID VENT CREATE-A-BREEZE 3-SPEED MANUAL CRANK ABS SMOKE DOME Features
Brand :    fan-tastic vent
Color :    VENTILATION RV
Size :    HARDWARE ROOFING & MAINTENANCE
Weight :    10.00 pounds
Model :    8000 ABS LID
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (Automotive Parts And Accessories product review) for Fan-Tastic Vent 801200 RV Roof Vent ABS LID Vent Create-A-Breeze 3-Speed Manual Crank ABS Smoke Dome available as-of ( Dec 2018 )

Hengs Industries 71112C2G1 White 12V Universal Vent

Roof vent; powered opening; for 14 inch x 14 inch; with screen; with 12 volt fan; pure white screen frame/ white lid; galvanized metal base; standard mount; with interior garnish/ 1-1/4 inch wide flange and radius corners. Mfg 71112-c2g1 71112c2g1 upc 811878010455

Hengs Industries 71112C2G1 White 12V Universal VentHengs-Industries-71112C2G1-White-Universal

HENGS INDUSTRIES 71112C2G1 WHITE 12V UNIVERSAL VENT Features
Brand :    hengs industiries
Weight :    4.42 pounds
Model :    71112C2G1
Quantity :    1
Order click here :    normally ships in 1-2 business days
Automotive Parts And Accessories :    Best Auto Accessory (hengs industiries product review) for Hengs Industries 71112C2G1 White 12V Universal Vent available as-of ( Dec 2018 )

RV Roof Vent Vortex II Ugrade Kit Multi-Speed Fan

Mounting hardware is provided do not let the unit hang by wires as you will damage the unit. If wanting to test unit before installing you must have unit facing correct direction, face down like when installed in rv, or blade will rub.

RV Roof Vent Vortex II Ugrade Kit Multi-Speed FanRoof-Vent-Vortex-Ugrade-Multi-Speed

RV ROOF VENT VORTEX II UGRADE KIT MULTI-SPEED FAN Reviews
Brand :    heng's
Color :    White
Weight :    15.00 pounds
  • The only tool required is a 2 phillips screw driver
  • Features a 3 speed fan with 2 speed reverse flow to allow air in or out of your rv.
  • Installs easily and fits most 14" x 14" roof vents
  • This unit will replace the screen on your current roof vent.
  • Fan will move 3 to 4 times more air than a normal roof vent fan.
Price :    $56.89 (was $62.80)
Model :    90046-cr
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (heng's product review) for RV Roof Vent Vortex II Ugrade Kit Multi-Speed Fan available as-of ( Dec 2018 )

camco rv roof vent cover, opens for easy cleaning, aerodynamic design, easily mounts to rv with included hardware white 40431 Price : 17.77, was : 0 as 2018-11-08
USUKDEFRESITJPCNCAGlobal
United States
Great Britain
German
France
Spain
Italy
Japan
China
Canada
World Wide
Camco Cleaning Aerodynamic Included 40431 (Auto Accessory) Reviewed by on jerdus.com

Top camco cleaning aerodynamic included 40431 (auto accessory) Content

The F.A.Q. for camco rv roof vent cover, opens for easy cleaning, aerodynamic design, easily mounts to rv with included hardware white 40431

I installed this product earlier this week so i cannot offer much regarding durability. It appears to be an item that is of better quality than the manual vents that are oem on my trailer. The installation took less than one hour after i gathered all necessary tools, etc. A few observations. 1. The fasteners are thankfully stainless steel and will not rust. 2. Easy installation and pretty much as described on the camco web site. One small observation, installing the carriage bolts takes a little bit of manipulation because the bolt heads become lodged between the roof of the camper and the l bracket. You'll figure this out. Not that big of a deal. 3. No printed instructions provided. The video instructions on the web site are adequate but i felt instructions should have been provided. This product was provided through online store fulfillment and not a jobber. 4. The video recommends a crescent wrench for bolt tightning. This tool will likely work but i found a nut driver provided a "snugger" tightening of the nuts. I also added a drop of locktite to the bolt threads. I did this mainly for additional locking resistance on the bolt threads and because i've seen lots of these vents on highway berms and presumed loose fasteners to be the culprit.

A number of questions have been asked here.

Q&A

(0) Question: How well will stand up to hail?


(1) Question: Will this work if i have a vent fan?


(2) Question: Does this cover fit over a 14in dome and can i still open the dome from the crank inside


(3) Question: Does it come with the brackets and screws ?


(4) Question: Has anyone experienced any difficulty installing these over a fan tastic vent fan system? air restriction, clearances, size? thanks


(5) Question: Will the power vent work on this model


(6) Question: Are all vents one standard size?


(7) Question: I have a fantastic fan on my rv that leaks as 1 corner of the cover does not stay down securely. if i put one of these on top, will leaks be prevented


(8) Question: Does this cover work with a fantastic fan?


(9) Question: How does it compare to the maxx air vent cover?



(note) Question: where/how to get Camco (manufacturer's brand) accessories & similiar Camco's products

Answer:

Click the marked text to copy link to Clipboard

Fits great works great looks good but if yours do not sit flush and tight to your roof like mine don't, seal the edge with butyl tape to seal off the gap because bugs and bees will still meandor underneath and get into the vent, past the fan, into the motorhome and drive you crazy triing to figure out how they got in and where ! . Hahaha


Auto Accessory, BestsellersTop Camco Cleaning Aerodynamic Included 40431 (Auto Accessory) FAQ Content

Best camco cleaning aerodynamic included 40431 (auto accessory) in review

I got this not realizing it didn't really apply to my rv because my rv has a sloping roof (it's an aliner camper trailer. ) the only way i could mount this cover is with the opening facing forward (into the wind) while traveling. I did so against the manufacturer's recommendation. I did strengthen the mount by putting a 16" piece of 3/4" aluminum strap along each side of the cover to better support it from flexing. I also used metal screws to attach the brackets to the vent frame rather than the tiny bolts provided. I put a small gob of gasket seal on each screw along with a lock washer to keep the screws from working loose. Hopefully, over time, it will work.

E. Finch, Sutton

You might like to see Nlgi no. 2 high performance multi-purpose synthetic ultra performance grease - ultra-performance grease (upg) is a high performance, multi-service, aluminum-complex, synthetic grease which significantly increases bearing life and equipment reliability. it also -royal purple 01312 nlgi no. 2 high performance multi-purpose synthetic ultra performance grease - 14.1oz.
  • Details: Bearings Run Smoother Cooler And Quieter.
  • Details: Satisfies A Wide Range Of Grease Requirements.
Low-End Royal Purple Performance Multi Purpose Synthetic (Auto Accessory) Roy01312 Royal Purple Performance Multi Purpose Synthetic
Or you might like to consider Gravity Water The Jr Products 321-a-23-a Gravity Water Dish Is A Direct Oem Replacement That Accepts Either 1-1/4" Or 1-3/8" Water Fill Hoses. It Contains A Tank Vent Connection And Is Uv, Impact -Jr Products 321-a-23-a Polar White Gravity Water Dish
  1. Feature: Direct Oem Replacement.
  2. Feature: Uv, Impact And Road Salt Resistant.
Buy Jr Products 321-a-23-a Polar White Gravity Water Dish (Auto Accessory) 321 A 23 A Jr Products 321-a-23-a Polar White Gravity Water Dish (321 a 23

W. Eva, North Yorkshire says

We purchased two of these roof vent covers to cover the roof vents on our slide on csmper. We have installed them and are pleased with the ease of installation and the quality of the product. They look nice installed and do not exceed the height of the roof top air conditioner that was factory installed. Having the roof vent covers allows us to keep the roof vents open while the camper is parked during rain and while on the road. We are firm believers in the use of roof vent covers. They do really provide a layer of protection for your camper or utility trailer.

L. Smith, Oldham

The smoke vent cover is perfect for our camper. However, the hardware was accidentally omitted. I called camco directly asking for a parts list so i could purchase the hardware locally. Camco sent me the hardware for free! the hardware arrived three days later. Camco is a wonderful company and i will be doing business with them in the future. In case someone needs the parts list, here it is:. (4) 8-32 hex nuts. (4) 8 flat washers. (4) 8-32 pan head screws. (4) 8 lock washer. (4) 1/4" lock washers. (4) 1/4"flat washers. (4) 1/4-20 hex nuts. (4) carriage screws. (4) l brackets

S. Sherry, Doncaster says

The price was right but i did see several reviews that indicated that the buyers were disappointed with the longevity of the product. The camco rv roof vent covers are made out of a different material than the more (much more) expensive vent covers. So at a fraction of the cost, i don't have the same expectations, as if i had purchased the more expensive ones. However, i did wipe them down with a uv protectant before installation and i plan on reapplying that product several times a year to try to get a bit more longevity out of them. I live in the southwest, were the uv is very intense. The installation was easy. It is much easier to understand the installation instructions if you watch the camco video vs. Trying to read the printed instructions. With that said, here are a few tips to make your installation easier and quicker. They list the few items that you will need for installation. A pencil is one item. You will also need a marker (not on their list). Trying to mark a grey metal vent frame with a pencil that has grey lead, makes it virtually impossible to see the mark (for drilling). They recommend the use of a small crescent wrench. If you have the appropriate sizes of open-ended wrenches (2 sizes of nuts), you will find those much easier to use than the recommended crescent wrench. Also, you may find it easier to first drill a small pilot hole (in the frame of the roof vent) and then drill the final hole (optional step). I also peeled the logo sticker off of the sides of the vent covers. I don't need to be a traveling billboard for camco. They peel off very easily. They also warn you not to over-tighten the hardware. However, the 2 screws that hold the louvered vent cover on the flat side of the cover are very easily stripped (metal screw into plastic). So just barely tighten those or you will find them completely stripped. After drilling and mounting the brackets to the roof vent frame, i covered the screw heads with a small dollop of lap sealant (again. Optional and not in the directions). I purchased the black one to go over the bed to diminish the amount of light coming in during the early morning hours. It seemed to do a fairly good job of doing that. I also saw a couple of reviews that indicated that the covers restricted how far you could open the vents. I found that i can crank them wide open. Eventually you can hit the top of the cover but at that point the roof vents are wide open. I don't see that as being an issue. So, overall (at this point in time) it seems to be a good value for the money. The only reason that i gave 4 stars instead of 5 was due to how easily the screws stripped, which hold the louvered cover in place. The one thing that all of the vent cover manufacturers talk about is of course, air flow. On that subject. I don't know.

L. Alexia, Milton Keynes

Had to replace my vent window after it disintegrated after only being a 2 year old one. Ordered that and ordered this to protect the new one. Was an easy install, you don't drill into the roof at all, just 4 small mounting holes to drill under then vent window for the brackets and stays water tight. With the mounting system you can tell it's a break away system in case you hit a tree branch or something else the vent cover will brake away, rather than damage your camper and it's less than a $30 repair, compared to a roof repair. I actually scored mine on online store warehouse deals for $13 brand new with a scuff on it, its on the roof so no one notices or sees a cosmetic scuff. I've been wanting one for my camper and it will protect my new vent window, which btw takes 15 mins to replace, so i'm very happy now .

M. Edith, Illinois says

Installation was pretty easy, and you don't need to punch or screw anything into your roof sealant. . I chose to cut the little screens out of the exhaust vent, because it just looked like a flow restriction for no reason. The whole thing sits about half an inch off the roof, so any bug that walk through a half inch gap can get under it anyway. My vent has a screen of its own, so i didn't need a screen before the screen.

P. Garner, Queensland

I got two for my jayco, generally am good about closing it up when i think it is going to rain, but wanted to be able to leave them open when going out for the day, or overnight, with one right over our bed. These are a lot lighter, and smaller than i was expecting. Just thin plastic, but easy to install, and should do the job. These do not mount to your roof, they mount to the little metal flange around your vent sticking up through the roof. Bolts onto l shaped brackets, you bolt onto that flange. So requires drilling 4 holes through the metal flange on your vent. Only problem i ran into was the hardware to attach to the flange is very small. Little screws, little washers, little nuts. I have a stock fan in the bathroom, which takes up most of that space, while trying to get the nut and washers on, dropped a washer into the little space between the fan motor and and edge of the opening. No way that will ever see the light of day again. Also, because of the fan in there, i miscalculated and drilled a bit close to one of the pieces of the fan, so had to put that screw in at an angle, then try to get it as straight as possible after getting it all together. So my advice would be, if you have two openings, and one with a fan, to install the non fan one first. Just harder to do with something besides a screen in the opening. . Both open about 45 degrees now, plenty to get some air movement through. In a hard rain, i have doubts it will be dry, the spray can probably get back in there, but in a gentle rain should work perfect. I don't know how they will travel yet. Took a short drive (45 minutes) and they were fine, but they were $16, so if i need to replace them in a few years, not going to break the bank. Perhaps the $100-$150 ones are better, but these were the right price, pretty easy to install, and should work fine.

E. Meghan, Knowsley says

Very nice product for trailer or rv usage. As reviewed by other buyers the vent opens about 80 to 90% of the way instead of fully open but its a lot better than worrying about weather getting in if the vent is left open going down the road or you forgot to close the vent. Nice quality product and hardware expect i think some of the screws to hold the mounting hardware should be a little bit bigger. But its cheap enough so if anything happens its makes more sense to buy a new one then fight for your money back. No other complaints. Hopefully this product delivers as its states.

F. Allen, Plymouth

Delivered very fast. Began installation imediately. I was afraid i would have to breach the roof of my camper but not the case. It bolts to the flange for the stock vent. Easy tool list, easy to follow directions. I love the idea of having the vent open if it's raining, or letting the hot air out in storage. My only concern is with the two screws that hold the screen louvers. While tightening them very carefully, i could tell that they really didn't get tight. I believe the plastic is to soft or they should have inset some sort of metal threads. Recomend inspecting covers to ensure aerodynamic/road vibrations don't cause screws to pull out of plastic. I don't think it's a reason not to buy this model over a brand thats much more expensive, i just see it as a potential point of failure especially if you over tighten them.

H. Colleen, Colorado says

Fan-freaking-tastic! these things allow us to keep the vents open in the camper while sitting on a permanent site. The vents, alone with the windows keeps the camper from becoming a mold infested wi sauna on wheels. Previous owners often complained of the mold during the summer and spend many hours wiping the walls with bleach and using very large buckets of damp rid. Why bother, when such an inexpensive solution, such as this, exists? stop messing with mold and clammy rv s and install these covers, open your vents and fa-get-about-it!

K. Tracey, North East Lincolnshire

The price was right but i did see several reviews that indicated that the buyers were disappointed with the longevity of the product. The camco rv roof vent covers are made out of a different material than the more (much more) expensive vent covers. So at a fraction of the cost, i don't have the same expectations, as if i had purchased the more expensive ones. However, i did wipe them down with a uv protectant before installation and i plan on reapplying that product several times a year to try to get a bit more longevity out of them. I live in the southwest, were the uv is very intense. The installation was easy. It is much easier to understand the installation instructions if you watch the camco video vs. Trying to read the printed instructions. With that said, here are a few tips to make your installation easier and quicker. They list the few items that you will need for installation. A pencil is one item. You will also need a marker. Trying to mark a grey metal vent frame with a pencil that has grey lead, makes it virtually impossible to see the mark (for drilling). They recommend the use of a small crescent wrench. If you have the appropriate sizes of open-ended wrenches (2 sizes of nuts), you will find those much easier to use than the recommended crescent wrench. Also, you may find it easier to first drill a small pilot hole (in the frame of the roof vent) and then drill the final hole (optional step). When the vent covers arrived (i bought 2 of them), the bags of hardware were glued (looked like hot glue) to the roof of the vent cover. It was terrible to get off. I had to use a flat screwdriver to pry it loose and even then, it did not all come off. I then resorted to using a heat gun (on low) to soften the glue and wipe it off. Then a final wipe with denatured alcohol to get the last of the reside off. What a pain the backside! i also peeled the logo sticker off of the sides of the vent covers. I don't need to be a traveling billboard for camco. They peel off very easily. They also warn you not to over-tighten the hardware. However, the 2 screws that hold the louvered vent cover on the flat side of the cover are very easily stripped (metal screw into plastic). So just barely tighten those or you will find them completely stripped. After drilling and mounting the brackets to the roof vent frame, i covered the screws with a small dollop of lap sealant (again. Optional and not in the directions), i found that having the white vent covers did not diminish the amount of light coming in. I also saw a couple of reviews that indicated that the covers restricted how far you could open the vents. I found that i can crank them wide open. Eventually you can hit the top of the cover but at that point the roof vents are wide open. I don't see that as being an issue. So, overall (at this point in time) they seem to be a good value for the money. The only reason that i gave 4 stars instead of 5 was due to how easily the screws stripped, which hold the louvered cover in place (and the glue fiasco). The one thing that all of the vent cover manufacturers talk about is of course, air flow. On that subject. I don't know.

J. Aldana, Camden says

These things are great. We bought 2 and i was able to get them fully installed in about 30 minutes. The instructions are very clearly written and provide excellent guidance for the installation process. All of the necessary hardware is provided, so there shouldn't be any unplanned trips to the home improvement store for screws and whatnot. . The only downside that i can see is that with these caps over our vents, the vents don't really open all the way. But that's a minor, minor gripe and one that i have no problem living with. At least we can keep the vents open all the time, even when the trailer is in storage. It allows air to circulate rather than be stagnant. We've decided that it was a very worthwhile purchase!

S. Nielsen, Picardie

It's awesome to be able to have vents open in our rv when we are going down the road or when it is raining. You don't realize how much those vents help circulate air until you aren't able to have them open. . These roof vent covers do the trick. They are easy to install, easy to use, and they keep the elements out while allowing you to have your vents open for circulation. I can't recommend these highly enough. I bought a while one for the "living area" of our rv and a black one for the bedroom. The black one does a great job keeping light out of our eyes in the morning.



Leave a Reply

You must be logged in to post a comment.


Top rv roof vent cover opens easy Review Content

Related Products

Product Image Gallery

Top-camco-cleaning-aerodynamic-included-40431-565400buqodg-Content