Eternabond Ops-1 Eternaprime Surface Conditioner -14 Oz. Spray Can (ops 1) 5658

Eternabond Ops-1 Eternaprime Surface Conditioner -14 Oz. Spray Can Review (ops 1)

I was very pleased with the results we got using this product. We have no more leaks on our glass roofed room at this time having been tested by two very heavy rain events. -S. Wilson

Eternabond Ops 1 Eternaprime Surface Conditioner Automotive Parts And Accessories

EternaBond RoofSeal White 3 x 50'

3" x 50' roll white priority shipping! not economy! fresh inventory! not sitting on the shelf for months or years! eternabond is the only microsealant in a tape form available that will stop virtually any leak or water proof any surface in minutes. Seal any rip, tear, or open seam in any surface with roofseal. Roofseal is the best solution for leak repair. It is the choice of professional roof repair specialists, on virtually all roof types including epdm, tpo, hypalon, most pvc, modified, all metals, even copper and kynar coated metals, tile, wood, concrete, etc. Roofseal even works great on land-fill and pond liners. Our specialized backing has proven to be uv stable, even after 19 years in full sunlight. Our microsealant has a built in primer which allows roofseal to bond with the surface it is installed on. Perfect for re-seaming all roofs, regardless of the material. Roofseal makes a permanent water-tight seal. 1. Locate area needing repair or sealing. 2. Clean the surface. Allow it to dry completely. Recommended cleaners: eternaclean, lacquer thinner, acetone, denatured alcohol, etc. (if rusty, scrape or sand loose rust off, then wipe off dust. ) 3. Remove release liner. (see liner removal tips section. ) only remove enough liner for the area you are working on. Keep adhesive side clean and dry. Apply tape to surface. 4. Apply pressure to activate bonding process. Use a steel roofer's roller for best results. The firmer the pressure or rubbing applied, the faster the bond. *note: eternabond does not stick to silicone. Please read instructions and test in small area first if you are unsure. Please contact us if you have any questions. Thanks for looking!

Roof-Seal-RS-3-50W-EternaBond-RoofSeal

MARSHALLTOWN The Premier Line E54D 2-Inch Flat Commercial Grade Solid Rubber Seam Roller DuraSoft Handle

Solid rubber seam roller medium firm rubber roller is versatile and rugged use on string, grass cloth and expanded vinyl and embossed wall covering set laminates, decals, non-slip strips, appliques resilient dura soft handle provides soft feel- reduces fatigue and offers excellent durability e54d 2 in. Rubber seam roller size:2-inch.

MARSHALLTOWN-Premier-Line-E54D-Commercial

EternaBond RSW-4-50 RoofSeal Sealant Tape, White - 4 x 50'

We purchased this eternabond sealant tape to repair our camper's leaking roof and it has worked so well. There was minor prep work to the roof before applying the tape but all in all it was a very easy process. However, this tape is super sticky so be very careful while using. We are extremely happy with the final results and we highly recommend this product.

Eternabond rsw-4-50. Ideal for use in sunny environments. Simple installation only requires some surface preparation before use.

EternaBond-RSW-4-50-RoofSeal-Sealant-White

Eternabond Rsw-4-50 Roofseal Sealant Tape, White - 4 X 50' (rsw 4 50) FAQ.

This is what is needed to seal roof leaks. I was skeptical until i used it. I sealed all of the seams on my galvanized metal roof 20ft cargo trailer. No more leaks! make sure that you remove all of the old tape(if any. I had metal foil tape) clean the surface well with lacquer thinner and apply the tape. I went with the 4" tape to make a good wide seal to the left and right of the seem. 2" would have worked, but i recommend the 4" to protect against water intrusion. I laid this down in 6ft to 8ft pieces as it would be hard to keep it straight down the whole length of my trailer roof if you were to do it in one long piece. The seams between the pieces are non issue. The next piece you put down will but right up to the last piece with no gap or you can overlap the other piece of tape. Whatever method works for you. Regardless it's important to smooth this down with some pressure to make sure it bonds well with the surface. Keep in mind that this tape is wicked sticky so you have no room for error. Once you lay it down its a done deal. This stuff is not coming off without a fight. . How long this stuff will hold up into the future is anyone's guess. It left a good 1st impression on me. I hope my review helps you if you are on the fence about a leak repair solution. It took me two rolls to do my 20ft trailer. -Notice from Y. Smith, North East Lincolnshire

Click to Show eternabond rsw-4-50 roofseal sealant tape, white - 4 x 50' (rsw 4 50) Details

Really pleased with this product. I have an older 5th wheel and the first rain storm after taking it out from under its cover this summer revealed 4 large roof seam leaks. After so research i used eternabong to seal the seams and around the roof structured and then put on a new liquid (rubber) roof. Just make sure you clean it well before application and don't forget how sticky it is! proper pressure on the tape after application is vital! i used some really sharp industrial scissors from harbor freight to cut it and that worked nice. I used the 6" wide to wrap around and down the long sides (over the edge) and cut it down to 3" wide for around the structures. I had tried a cheaper brand with tar on the back and at over 100 degrees consistently where i live it melted and slid off. Some before (after scrapping old caulking off) and after photos included.

- X. CarolynThis tape looks like it will never separate from my trailer! it is the "stickiest" stuff i've ever used. I bought it to anchor the new flexible, thin solar panels i purchased to the roof of my travel trailer. It is easy to cut to size, but be very cautious once you begin to peel the backing off the adhesive! do it a little at a time, and be careful with the alignment. Once it touches anything, it is almost impossible to reposition. . However, now that the panels are in place and anchored, i have no concerns that they will come off. I also covered the wiring to the panels with this stuff. Hopefully you can see how nicely it has applied in the attached photo.

This stuff is ridiculous! we used it on the top of our teardrop camper to seal the seams. It goes on easy but once it is on, it is on. This is a good thing because that is what we were looking for. It is a little forgiving but once you put pressure on the tape, forget about it. Also, if you get the adhesive stuck to the backing (if you are clumsy like me), you are done with that piece. You will never get it lose again. You have to do like i did and cut it off and get another piece. If this stuff lasts, it is the most amazing sealant i have ever used. I am going to keep a roll around because i can see me needing it someday for something i don't realize i need it for yet. (it's a man thing).

E. Eva, District of Columbia