J-b Weld 50176 Kwikweld Steel Reinforced Epoxy Syringe – Dries Dark Grey – 25 Ml (J B Weld) 4177

Review for j b weld 50176 kwikweld reinforced

Price was $7.13. Great product. works great

-U. Elizabeth

J-b Weld 50176 Kwikweld Steel Reinforced Epoxy Syringe – Dries Dark Grey – 25 Ml Auto Accessory 50176

  1. Advantages: Dark grey drying two-part epoxy cold weld sets in 6 minutes and cures in 4-6 hours
  2. Advantages: Great for household repairs, automotive, plumbing, marine, crafts and more
  3. Advantages: Tensile strength of 2424 PSI for a strong, permanent bond

J-b-weld-50176-kwikweld-reinforced: J B Weld Auto Accessory J-b Weld Kwikweld Syringe. . J-b Kwikweld Is A Fast Setting Version Of The Original J-b Weld

Buy Now

Content

Dark Grey Drying Two-part Epoxy Cold Weld Sets In 6 Minutes And Cures In 4-6 Hours, Great For Household Repairs, Automotive, Plumbing, Marine, Crafts And More, Tensile Strength Of 2424 PSI For A Strong, Permanent Bond, No Mess, No Waste Cap Screws On One Way To Eliminate Accidental Mixing And Ensure It Won't Dry Out, J-B Weld Is Proudly Made In The USA, Advantages J-B Weld 50176 KwikWeld Steel Reinforced Epoxy Syringe - Dries Dark Grey - 25 ml.

Extras: J-b Weld 50176 Kwikweld Steel Reinforced Epoxy Syringe - Dries Dark Grey - 25 Ml

Automotive J-b Weld 50176 Kwikweld Steel Reinforced Epoxy Syringe - Dries Dark Grey - 25 Ml 50176 Competitive Automotive Parts And Accessories 799916134007 J B Weld, J-b Weld 50176 Kwikweld Steel Reinforced Epoxy Syringe - Dries Dark Grey - 25 Ml 5053406441071. j-b weld kwikweld syringe. . j-b kwikweld is a fast setting version of the original j-b weld two-part epoxy cold weld system that provides strong lasting repairs to metal and multiple other surface types. after mixing it forms a permanent bond and can be shaped tapped filed sanded and drilled after curing. j-b kwikweld has a 1:1 mixing ratio sets in 6 minutes and is fully cured in 4-6 hours. j-b kwikweld cures to a dark grey color is rated at a tensile strength of 2424 psi and will withstand temperatures up to 300 degrees f. . . use on:automotivebrickceramicconcreteepoxy and adhesivesand more. instructions. . 1. prepare: clean repair area of dirt grease oil paint rust etc. . 2. mix: after removing the replaceable cap press down on plunger and squeeze equal amounts onto a disposable surface and mix thoroughly. . 3. apply: apply with appropriate tool in an even coat weld bead or extruded shape as needed. . 4. dry: sets in 6 minutes. cures in 4-6 hours. if temperature is below 40 degrees fahrenheit then set time is longer. . . j-b weld is proudly made in the usa J-b Weld 50176 Kwikweld Steel Reinforced Epoxy Syringe - Dries Dark Grey - 25 Ml Auto Accessory 50176.

J-B Weld 50176 KwikWeld Steel Reinforced Epoxy Syringe - Dries Dark Grey - 25 ml Overview (50176)

J-b Weld 50176 Kwikweld Steel Reinforced Epoxy Syringe - Dries Dark Grey - 25 Ml

  • Order : Automotive
  • Brand : J-B Weld
  • ClothingSize : 1-Pack
  • Color : Black
  • EAN : 5053406441071
  • Manufacturer : J-B Weld
  • Suggested Min-Age : 168
  • ManufacturerPartsWarrantyDescription : Parts
  • Model : 50176
  • MPN : 50176
  • Total Items : 1
  • Quantity : 1
  • Part Number : 50176
  • Group : Automotive Parts And Accessories
  • Category : AUTO ACCESSORY
  • ReleaseDate : 2012-09-20
  • Size : 1-Pack
  • Title : J-B Weld 50176 KwikWeld Steel Reinforced Epoxy Syringe - Dries Dark Grey - 25 Ml
  • UPC : 799916134007
  • Warranty : Manufacturer

Extras J-b-weld-50176-kwikweld-reinforced

J B Weld Automotive 50176: J-B Weld 50176 KwikWeld Steel Reinforced Epoxy Syringe - Dries Dark Grey - 25 ml

  • Dark Grey Drying Two-part Epoxy Cold Weld Sets In 6 Minutes And Cures In 4-6 Hours
  • J-B Weld 8267-S SteelStik Steel Reinforced Epoxy Putty Stick - 2 Oz
  • J-B Weld 50112 Clear 25 Ml ClearWeld Quick-Setting Epoxy Syringe
  • J-B Weld 8267 SteelStik Reinforced Epoxy Putty Stick, 2 Oz
  • J-B Weld 50132 PlasticWeld Quick-Setting Epoxy Syringe - Dries Off-White - 25 Ml
  • J-B Weld 8265S Cold Weld Steel Reinforced Epoxy With Hardener, 2 Oz
  • J-B Weld 50101 MinuteWeld Instant-Setting Epoxy Syringe - Dries Clear - 25ml
  • J-B Weld 8276 KwikWeld Quick Setting Steel Reinforced Epoxy - 2 Oz, Pack Of 2
  • J-B Weld 8276 KwikWeld Quick Setting Steel Reinforced Epoxy - 2 Oz
  • J-B Weld 8281 Professional Size Steel Reinforced Epoxy Twin Pack - 10 Oz
  • J-B Weld 50172 MarineWeld Marine Adhesive Epoxy Syringe - Dries White - 25ml
  • Great For Household Repairs, Automotive, Plumbing, Marine, Crafts And More
  • Tensile Strength Of 2424 PSI For A Strong, Permanent Bond
Affordable

If You're Purchasing This Thinking It Will Be Less Messy Than The Two Separate Tubes Think Again. Each Of The Plungers Don't Operate Independently And The Substances Aren't Equally Viscous So You Get One (the Black) That Comes Out Faster Than The Other Unfortunately Causing Waste And Mess. The Actual Dried Product Is Still Some Amazing Stuff But It Does Seem To Be A Bit More Brittle Than The Traditional Tubes. It Definitely Sets Hard A Lot Quicker Though.

j-b-weld-50176-kwikweld-reinforced
Click to see NoticeJ-b Weld 50176 Kwikweld Steel Reinforced Epoxy Syringe - Dries Dark Grey - 25 Ml (J B Weld)"It's J-b Weld Works As It Should And Easy To Use. The Syringe Applicator Makes It Easy To Get The Right Mix."

Adhesive Removers » Film & Tape Dry Adhesives » Glue Sticks & Pens » Liquid White Glues » Rubber Cement » Spray Adhesives » Super Glue » Metal Filled Epoxies » Tile Epoxy Adhesives »

J-B Weld 8267 SteelStik Reinforced Epoxy Putty Stick, 2 oz

J-b Weld Steelstik Epoxy Putty Sticksteelstik Is A Hand-mixable Steel-reinforced Non-rusting Epoxy Putty That Quickly Repairs Or Rebuilds Anything Made Of Metal. After Mixing It Forms An Industrial-strength Polymer Compound That Can Be Molded Into Shapes Or Used To Build Up Patch And Repair Steel Components. Steelstik Sets In 3-5 Minutes And After 60 Minutes Can Be Drilled Tapped Machined Ground Filed And Painted. Steelstik Cures To A Dark Grey Color Is Rated At A Tensile Strength Of 900 Psi And Will Withstand Temperatures Up To 300 Degrees F. Use On:automotivebrickceramicconcretemetalunder Water/wetand Moreinstructions1. Cut:remove Required Amount Of Putty. 2. Mix: Thoroughly Knead Putty With Fingers To A Uniform Color. 3. Apply: Press Putty Firmly To The Surface To Be Repaired. J-b Weld Is Proudly Made In The Usa

J-B Weld 8267 SteelStik Reinforced Epoxy Putty Stick, 2 oz

J-B-Weld-8267-SteelStik-Reinforced

J-B WELD 8267 STEELSTIK REINFORCED EPOXY PUTTY STICK, 2 OZ Review
Brand :    j-b weld
Model :    8267
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (j-b weld) reviews for J-B Weld 8267 SteelStik Reinforced Epoxy Putty Stick, 2 oz available as-of ( Dec 2019 )
Hand-mixable, steel-reinforced, non-rusting epoxy putty that quickly repairs or rebuilds anything made of metalGreat for patching and repairing automotive and machine parts, plumbing, stripped threads and household repairsWhen fully cured, SteelStik has a tensile strength of 900 psi and will withstand temperatures of up to 300 degrees FJ-B Weld is proudly made in the USASets in 3-5 minutes and cures to a dark grey color in 1 hour

J-B Weld 50112 Clear 25 ml ClearWeld Quick-Setting Epoxy Syringe

J-b Weld Clearweld Syringeclearweld Is A Quick Setting Multipurpose Two Part Epoxy That Provides A Strong And Lasting Bond On Most Surfaces Including Tile Most Plastics Ceramic Glass Wood And Metal. Clearweld Is Designed To Cure With A Clear Transparent Bond When Used At Thicknesses Of Less Than 15 Mil. Clearweld Has A 1:1 Mixing Ratio Sets In 5 Minutes And Cures In 1 Hour. With A Tensile Strength Of 4400 Psi Clearweld Sets To A Hard Permanent Bond. Use On:automotivebrickceramiccloth/carpetconcreteepoxy And Adhesivesfiberglassglassplastic/composite/pvcand Moreinstructions1. Prepare: Clean Surface Area Of Dirt Grease Oil Paint Or Loose Debris. For Best Results Use A Detergent Or Degreaser To First Clean The Surface Then Roughen Surface With File Or Coarse Sandpaper To Provide The Best Repair. 2. Mix: After Removing The Replaceable Cap Press Down On Plunger And Squeeze Equal Amounts Onto A Disposable Surface And Mix Thoroughly. 3. Apply: Apply With Appropriate Tool In An Even Coat Weld Bead Or Extruded Shape As Needed. 4. Dry: Sets In 5 Minutes. Cures In 1 Hour. If Temperature Is Below 40 Degrees Fahrenheit Then Set Time Is Longer. J-b Weld Is Proudly Made In The Usa

J-B Weld 50112 Clear 25 ml ClearWeld Quick-Setting Epoxy Syringe

J-B-Weld-50112-ClearWeld-Quick-Setting

J-B WELD 50112 CLEAR 25 ML CLEARWELD QUICK-SETTING EPOXY SYRINGE Summary
Brand :    j-b weld
Color :    Clear
Size :    1-Pack
Weight :    0.10 pounds
Model :    50112
Quantity :    1
Order click here :    normally ships in 1-2 business days
Automotive Parts And Accessories :    Best Auto Accessory (Automotive Parts And Accessories) reviews for J-B Weld 50112 Clear 25 ml ClearWeld Quick-Setting Epoxy Syringe available as-of ( Dec 2019 )
J-B Weld is proudly made in the USACrystal clear epoxy sets in 5 minutes and cures in 1 hourGreat for tile, most plastics, ceramic, glass, wood, metal and moreTensile strength of 4400 PSI for a strong, permanent bondNo mess, no waste cap screws on one way to eliminate accidental mixing and ensure it won't dry out

J-B Weld 8281 Professional Size Steel Reinforced Epoxy Twin Pack - 10 oz

J-b Weld Original Cold-weld Formula Steel Reinforced Epoxyj-b Weld Is The Original Cold Weld Two-part Epoxy System That Provides Strong Lasting Repairs To Metal And Multiple Surfaces. Mixed At A Ratio Of 1:1 It Forms A Permanent Bond And Can Be Shaped Tapped Filed Sanded And Drilled After Curing. At Room Temperature J-b Weld Sets In 4-6 Hours To A Dark Grey Color. A Full Cure Is Reached In 15-24 Hours. J-b Weld Has A Tensile Strength Of 3960 Psi And Sets To A Hard Bond Overnight. It Can Withstand Temperatures Up To 550f When Fully Cured. Use On:automotivebrickconcreteepoxy And Adhesivesfiberglassmetaland Moreinstructions1. Prepare: Clean Surface Area Of Dirt Grease Oil Paint Or Loose Debris. For Best Results Use A Detergent Or Degreaser To First Clean The Surface Then Roughen Surface With File Or Coarse Sandpaper To Provide The Best Repair. 2. Mix: Squeeze Equal Parts From Each Tube Onto A Disposable Surface And Mix Thoroughly. 3. Apply: Apply With Appropriate Tool In An Even Coat Weld Bead Or Extruded Shape As Needed. 4. Dry: Sets In 4-6 Hours. Cures In 15-24 Hours. Allow 4-6 Hours Before Handling And 15 Hours (minimum) Before Putting Object Back In Use. J-b Weld Is Proudly Made In The Usa

J-B Weld 8281 Professional Size Steel Reinforced Epoxy Twin Pack - 10 oz

J-B-Weld-8281-Professional-Reinforced

J-B-WELD-8281-PROFESSIONAL-SIZE-STEEL-REINFORCED-EPOXY-TWIN-PACK---10-OZ-(J-B-WELD)

Image of J-b-weld-8281-professional-size-steel-reinforced-epoxy-twin-pack---10-oz-(j-b-weld)
J-b-weld-8281-professional-size-steel-reinforced-epoxy-twin-pack---10-oz-(j-b-weld)"J-b Weld 8281 Professional Size Steel Reinforced Epoxy Twin Pack - 10 Oz Auto Accessory 8281
  • Listed: For strong permanent repairs on automotive, plumbing, marine, crafts and other projects
  • Listed: Stays pliable for 30 minutes after mixing, sets in 4-6 hours and cures fully in 15-24 hours
  • Listed: Can be formed, drilled, ground, tapped, machined, filled, sanded and painted
j-b weld 8281 professional size steel reinforced epoxy twin pack - 10 oz: j b weld auto accessory j-b weld original cold-weld formula steel reinforced "
J-B WELD 8281 PROFESSIONAL SIZE STEEL REINFORCED EPOXY TWIN PACK - 10 OZ Advantage
Brand :    j-b weld
Size :    10 oz, 2 Pack
Weight :    0.80 pounds
Model :    8281
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (j-b weld) reviews for J-B Weld 8281 Professional Size Steel Reinforced Epoxy Twin Pack - 10 oz available as-of ( Dec 2019 )
Can be formed, drilled, ground, tapped, machined, filled, sanded and paintedTensile strength: 3960 PSIStays pliable for 30 minutes after mixing, sets in 4-6 hours and cures fully in 15-24 hoursStrong and nontoxic after it has set and temperature resistant up to 550FFor strong permanent repairs on automotive, plumbing, marine, crafts and other projects

J-B Weld 8276 KwikWeld Quick Setting Steel Reinforced Epoxy - 2 oz, Pack of 2

J-b Kwikweld Is A Fast Setting Version Of The Original J-b Weld Two-part Epoxy Cold Weld System That Provides Strong Lasting Repairs To Metal And Multiple Other Surface Types. After Mixing It Forms A Permanent Bond And Can Be Shaped Tapped Filed Sanded And Drilled After Curing. J-b Kwikweld Has A 1:1 Mixing Ratio Sets In 6 Minutes And Is Fully Cured In 4-6 Hours. J-b Kwikweld Cures To A Dark Grey Color Is Rated At A Tensile Strength Of 2424 Psi And Will Withstand Temperatures Up To 300f.

J-B Weld 8276 KwikWeld Quick Setting Steel Reinforced Epoxy - 2 oz, Pack of 2

J-B-Weld-8276-KwikWeld-Reinforced

Review from Z. Rose, Sandwell Excellent Epoxy Set Time Is Quick Don't Mix More Then A Teaspoon Or Two At A Time. Stays Glossy And Sticky For Only Two Or Three Minutes Apply To Surfaces To Be Bonded And Clamp Before It Loses The Glossy Appearance For Best Bond.

J-b Weld 8276 Kwikweld Quick Setting Steel Reinforced Epoxy - 2 Oz, Pack Of 2 (J B Weld) Review

Review from R. Smith, Georgia 
Easy To Use Good Strong Adhesive Accidently Sawed Part Way Through My Aluminum Miter Guide This Filled And Strengthen To A Like New Condition Saving Me Hundreds Of Dollars. Thank You.
J-B-WELD-8276-KWIKWELD-QUICK-SETTING-STEEL-REINFORCED-EPOXY---2-OZ,-PACK-OF-2-(J-B-WELD)
Image of J-b-weld-8276-kwikweld-quick-setting-steel-reinforced-epoxy---2-oz,-pack-of-2-(j-b-weld)"Gotta Love Jb Weld - Really Works Really Strong. Highly Recommended For Many Years - Still The Best If Used Properly."

When They Say 5 Minute Set Time They Mean It. Mix Only What You Need For The Current Joint And Work Quickly.

Y. Shayna, North Carolina

J-B WELD 8276 KWIKWELD QUICK SETTING STEEL REINFORCED EPOXY - 2 OZ, PACK OF 2 Reviews
Brand :    j-b weld
Size :    2 oz (2-Pack)
Model :    8276
Quantity :    2
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (j-b weld) reviews for J-B Weld 8276 KwikWeld Quick Setting Steel Reinforced Epoxy - 2 oz, Pack of 2 available as-of ( Dec 2019 )
Once cured it forms a permanent bond and can be shaped, tapped, filed, sanded and drilledSets in 6 minutes and cures dark grey in 4-6 hoursFast setting version of The Original J-B Weld two-part epoxy cold weld systemWill withstand temperatures of up to 300 degrees FahrenheitRated at a tensile strength of 2424 PSI

J-B Weld 8276 KwikWeld Quick Setting Steel Reinforced Epoxy - 2 oz

J-b Weld Kwikweld Quick Setting Steel Reinforced Epoxyj-b Kwikweld Is A Fast Setting Version Of The Original J-b Weld Two-part Epoxy Cold Weld System That Provides Strong Lasting Repairs To Metal And Multiple Other Surface Types. After Mixing It Forms A Permanent Bond And Can Be Shaped Tapped Filed Sanded And Drilled After Curing. J-b Kwikweld Has A 1:1 Mixing Ratio Sets In 6 Minutes And Is Fully Cured In 4-6 Hours. J-b Kwikweld Cures To A Dark Grey Color Is Rated At A Tensile Strength Of 2424 Psi And Will Withstand Temperatures Up To 300 Degrees F. Great For:household Repairsautomotiveplumbingmarinecrafts And Moreuse On:automotivebrickconcretefiberglassmetaland Moreinstructions1. Prepare: Clean Surface Area Of Dirt Grease Oil Paint Or Loose Debris. For Best Results Use A Detergent Or Degreaser To First Clean The Surface Then Roughen Surface With File Or Coarse Sandpaper To Provide The Best Repair. 2. Mix: Squeeze Equal Parts From Each Tube Onto A Disposable Surface And Mix Thoroughly. 3. Apply: Apply With Appropriate Tool In An Even Coat Weld Bead Or Extruded Shape As Needed. 4. Dry: Sets In 6 Minutes. Cures 4 Hours. If Temperature Is Below 40 Degrees F Then Set Time Is Longer. J-b Weld Is Proudly Made In The Usa

J-B Weld 8276 KwikWeld Quick Setting Steel Reinforced Epoxy - 2 oz

J-B-Weld-8276-KwikWeld-Reinforced

J-B WELD 8276 KWIKWELD QUICK SETTING STEEL REINFORCED EPOXY - 2 OZ Advantages
Brand :    j-b weld
Color :    White
Size :    2 oz
Weight :    0.5 pounds
Model :    8276
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (Automotive Parts And Accessories) reviews for J-B Weld 8276 KwikWeld Quick Setting Steel Reinforced Epoxy - 2 oz available as-of ( Dec 2019 )
Sets in 6 minutes and cures dark grey in 4-6 hoursFast setting version of The Original J-B Weld two-part epoxy cold weld systemOnce cured it forms a permanent bond and can be shaped, tapped, filed, sanded and drilledRated at a tensile strength of 2424 PSIWill withstand temperatures of up to 300 degrees FahrenheitGreat for household repairs, automotive applications, crafts and more

J-B Weld 50101 MinuteWeld Instant-Setting Epoxy Syringe - Dries Clear - 25ml

J-b Weld Minuteweld Syringeminuteweld Is A Special Formulated High-strength Two-part Instant Setting Epoxy. Minuteweld Will Set Under Most Temperature Conditions In One Minute. Minuteweld Is Designed To Adhere To Multiple Surfaces And Can Be Used On Ceramic Tile Glass Stone Most Plastics Wood And Metal. Use On:automotiveceramiccloth/carpetepoxy And Adhesivesfiberglassplastic/composite/pvcand Moreinstructions1. Prepare: Clean Surface Area Of Dirt Grease Oil Paint Or Loose Debris. For Best Results Use A Detergent Or Degreaser To First Clean The Surface Then Roughen Surface With File Or Coarse Sandpaper To Provide The Best Repair. 2. Mix: After Removing The Replaceable Cap Press Down On Plunger And Squeeze Equal Amounts Onto A Disposable Surface And Mix Thoroughly. 3. Apply: Apply With Appropriate Tool In An Even Coat Weld Bead Or Extruded Shape As Needed. 4. Dry: Sets In 1 Minute. Cures In 1 Hour. If Temperature Is Below 40 Degrees Fahrenheit Then Set Time Is Longer. J-b Weld Is Proudly Made In The Usa

J-B Weld 50101 MinuteWeld Instant-Setting Epoxy Syringe - Dries Clear - 25ml

J-B-Weld-50101-MinuteWeld-Instant-Setting

J-B WELD 50101 MINUTEWELD INSTANT-SETTING EPOXY SYRINGE - DRIES CLEAR - 25ML Advantage
Brand :    j-b weld
Size :    25 Milliliter
Weight :    0.30 pounds
Model :    50101
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (j-b weld) reviews for J-B Weld 50101 MinuteWeld Instant-Setting Epoxy Syringe - Dries Clear - 25ml available as-of ( Dec 2019 )
Tensile strength of 2850 PSI for a strong, permanent bondNo mess, no waste cap screws on one way to eliminate accidental mixing and ensure it won't dry outGreat for tile, most plastics, ceramic, glass and moreClear, instant setting two-part epoxy sets in 1 minute and cures in 1 hourJ-B Weld is proudly made in the USA

J-B Weld 8267-S SteelStik Steel Reinforced Epoxy Putty Stick - 2 oz

J-b Weld Steelstik Epoxy Putty Sticksteelstik Is A Hand-mixable Steel-reinforced Non-rusting Epoxy Putty That Quickly Repairs Or Rebuilds Anything Made Of Metal. After Mixing It Forms An Industrial-strength Polymer Compound That Can Be Molded Into Shapes Or Used To Build Up Patch And Repair Steel Components. Steelstik Sets In 3-5 Minutes And After 60 Minutes Can Be Drilled Tapped Machined Ground Filed And Painted. Steelstik Cures To A Dark Grey Color Is Rated At A Tensile Strength Of 900 Psi And Will Withstand Temperatures Up To 300 Degrees F. Use On:automotivebrickceramicconcretemetalunder Water/wetand Moreinstructions1. Cut:remove Required Amount Of Putty. 2. Mix: Thoroughly Knead Putty With Fingers To A Uniform Color. 3. Apply: Press Putty Firmly To The Surface To Be Repaired. J-b Weld Is Proudly Made In The Usa

J-B Weld 8267-S SteelStik Steel Reinforced Epoxy Putty Stick - 2 oz

J-B-Weld-8267-S-SteelStik-Reinforced

J-B WELD 8267-S STEELSTIK STEEL REINFORCED EPOXY PUTTY STICK - 2 OZ Review
Brand :    j-b weld
Color :    Dark Gray
Size :    1-Pack
Weight :    0.11 pounds
Model :    8267-S
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (Automotive Parts And Accessories) reviews for J-B Weld 8267-S SteelStik Steel Reinforced Epoxy Putty Stick - 2 oz available as-of ( Dec 2019 )
Can be drilled, filed, tapped, machined and paintedThe product is steelstik epoxy stickEasy and simple use kitSteel reinforced epoxy putty repairs anything made of metalThe product is manufactured in United statesWill cure on wet and dry surfaces, even completely submerged in gasoline or water

J-B Weld 50172 MarineWeld Marine Adhesive Epoxy Syringe - Dries White - 25ml

J-b Weld Marineweld Syringej-b Marineweld Is A Specially Formulated Two Part Cold-weld Adhesive System That Provides Strong Lasting Repairs For Bonding Different Or Similar Surfaces Such As Metal Composites Fiberglass And Others. Marineweld Sets In 20 Minutes At Room Temperature. At Full Cure Its Color Is White. It May Then Be Shaped Tapped Filed Sanded And Drilled Retaining Full Strength Above Or Below The Waters Surface. Marineweld Has A 1:1 Mixing Ratio And Tensile Strength Of 3960 Psi. Use On:epoxy And Adhesivesfiberglassglassunder Water/wetand Moreinstructions1. Prepare: Clean Surface Area Of Dirt Grease Oil Paint Or Loose Debris. For Best Results Use A Detergent Or Degreaser To First Clean The Surface Then Roughen Surface With File Or Coarse Sandpaper To Provide The Best Repair. 2. Mix: After Removing The Replaceable Cap Press Down On Plunger And Squeeze Equal Amounts Onto A Disposable Surface And Mix Thoroughly. 3. Apply: Apply With Appropriate Tool In An Even Coat Weld Bead Or Extruded Shape As Needed. 4. Dry: Sets In 20 Minutes. Cures In 15-24 Hours. Allow 4-6 Hours Before Handling And A Minimum Of 15 Hours Before Putting Object Back In Use. J-b Weld Is Proudly Made In The Usa

J-B Weld 50172 MarineWeld Marine Adhesive Epoxy Syringe - Dries White - 25ml

J-B-Weld-50172-MarineWeld-Adhesive

Review from O. Broyles, Birmingham Used To Repair A Few Chips In My Tub. Worked Like A Charm And You Can't Even Tell Where The Repairs Are ;)

J-b Weld 50172 Marineweld Marine Adhesive Epoxy Syringe - Dries White - 25ml (J B Weld) Review

Review from R. Hakala, Queensland 
I Used This To Repair A Chipped Corner On My Sink. Kind Of Tricky To Mold How You Want It But A Fine Sandpaper Helped After I Let It Set. Good Product.
J-B-WELD-50172-MARINEWELD-MARINE-ADHESIVE-EPOXY-SYRINGE---DRIES-WHITE---25ML-(J-B-WELD)
Image of J-b-weld-50172-marineweld-marine-adhesive-epoxy-syringe---dries-white---25ml-(j-b-weld)"Works Great On A Boat Hull As A Cosmetic Cover Like Gel Coat. Can Use A Artist Brush To Touch Up An Area Providing You Hurry."

I Had A Large Chip In The Top Sheet Of My Snowboard. It Wasn't Affecting The Performance At All But If Any Moisture Were To Get Into The Wood Core Than The Board Would Start To Warp And Become Un-rideable. I Did Some Research Online And Decided To Purchase This Epoxy To See If It Would See The Chip And Keep Water Out. It Worked Perfectly! This Simple Fix Prevented Me From Having To Replace My Snowboard!

W. Aldana, Utah

Good Strong Material With A Fast Cure Time. U Used It To Install Dodger Hw On The Sailboat As Well As To Repair One Area With Damaged Gelcoat. After Epoxy Has Cured It Sands Well.

Q. Wilson, Pays de la Loire

J-B WELD 50172 MARINEWELD MARINE ADHESIVE EPOXY SYRINGE - DRIES WHITE - 25ML Overview
Brand :    j-b weld
Color :    25 ml.
Size :    25 Milliliter
Weight :    1.6 pounds
Model :    50172
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (j-b weld) reviews for J-B Weld 50172 MarineWeld Marine Adhesive Epoxy Syringe - Dries White - 25ml available as-of ( Dec 2019 )
Great for boats, personal watercraft, deck and hull accessories and moreJ-B Weld is proudly made in the USATensile strength of 3960 PSI for a strong, permanent bondSpecially formulated two-part epoxy cold weld sets in 20 minutes and cures in 15-24 hoursNo mess, no waste cap screws on one way to eliminate accidental mixing and ensure it won't dry out

J-B Weld 8265S Cold Weld Steel Reinforced Epoxy with Hardener, 2 oz

J-b Weld Original Cold-weld Formula Steel Reinforced Epoxyj-b Weld Is The Original Cold Weld Two-part Epoxy System That Provides Strong Lasting Repairs To Metal And Multiple Surfaces. Mixed At A Ratio Of 1:1 It Forms A Permanent Bond And Can Be Shaped Tapped Filed Sanded And Drilled After Curing. At Room Temperature J-b Weld Sets In 4-6 Hours To A Dark Grey Color. A Full Cure Is Reached In 15-24 Hours. J-b Weld Has A Tensile Strength Of 3960 Psi And Sets To A Hard Bond Overnight. It Can Withstand Temperatures Up To 550f When Fully Cured. Use On:automotivebrickconcreteepoxy And Adhesivesfiberglassmetaland Moreinstructions1. Prepare: Clean Surface Area Of Dirt Grease Oil Paint Or Loose Debris. For Best Results Use A Detergent Or Degreaser To First Clean The Surface Then Roughen Surface With File Or Coarse Sandpaper To Provide The Best Repair. 2. Mix: Squeeze Equal Parts From Each Tube Onto A Disposable Surface And Mix Thoroughly. 3. Apply: Apply With Appropriate Tool In An Even Coat Weld Bead Or Extruded Shape As Needed. 4. Dry: Sets In 4-6 Hours. Cures In 15-24 Hours. Allow 4-6 Hours Before Handling And 15 Hours (minimum) Before Putting Object Back In Use. J-b Weld Is Proudly Made In The Usa

J-B Weld 8265S Cold Weld Steel Reinforced Epoxy with Hardener, 2 oz

J-B-Weld-8265S-Reinforced-Hardener

Review from I. Florence, Languedoc-Roussillon Used This On Some Splitting Fabric On A Beach Chair That Could Not Be Resown. Expensive Chair So Tried This Jb On The Underside Of The Fabric. Works! Steel Reinforced Gives It Extra Toughness. Pleased As Punch. One Of The Tubes Had A Lot Of Air In It But Jb Customer Service Was Great And Mailed A Replacement Tube Plus A New Twin Pak. Love The Product Love The Company! You Will Too.

J-b Weld 8265s Cold Weld Steel Reinforced Epoxy Hardener, 2 Oz (J B Weld) Review

Review from O. Connie, South Dakota 
Broke A Piece Of Mim That If Not Repaired It Would Have Cost Me Hundreds Of Dollars To Replace The Part That Housed My High Mounted 3rd Brake Light. I Had To Use Super Glue To Set The Small Mim Part To The Larger Part Which Was Where The Brake Light Mounted On My 2011 Pilot. After The Super Glue Set I Applied The Epoxy. After Checking It 2 Hours Later I Surfed The Web To See If Applying Heat Would Speed Up The Curing Process. I Found Many Articles That Supported Applying Heat Which I Did. I Applied Heat With A Hair Dryer And It Set In 30 Minutes. Much Faster The The Hours Recommended. Weeks Later It's Still Holding. The Dealer Would Have Charged Me For The Whole Housing Assembly. Highly Recommend This Product.
J-B-WELD-8265S-COLD-WELD-STEEL-REINFORCED-EPOXY-HARDENER,-2-OZ-(J-B-WELD)
Image of J-b-weld-8265s-cold-weld-steel-reinforced-epoxy-hardener,-2-oz-(j-b-weld)"My Nissan Altima Handle Broke When I Was Trying To Open The Door And A New One Would Cost Me Like $100+. When I Read Online - Most Folks Suggested Me Not To Use Jb Weld Since It Would Not Be Able To Sustain The Force - But It Has Been 2 Months And It Is Still Holding With All The Usage. This Product Is Really Awesome - Make Sure To Follow The Instructions."

Just Like Buying It In The Store But It Came Right To My Door. I Have Used J-b Weld A Couple Of Times And It Is Really Tough Stuff. I Used This To Fix A Laptop Case That Was Broken. The Whole Corner Where The Screen Hinge Attached Was Broken Out Where It Screwed Into The Bottom Case (clamshell). This Held It All Together So I Could Screw The Hinge In And We Are Good To Go. Not As Good As A Laptop Case That Is Well Designed But Allows You To Make Repairs When Just Replacing The Part Is Not An Options (in My Case Because It Just Would Break Again So It Needed Reinforcement).

R. Nellie, Manchester

I've Yet To Have Jb Weld Fail Me. I Have A Belt Buckle That Kept On Popping Off When I Used Gorilla Or Super Glue. I Applied Jb Weld Five Months Ago And It's Still As Solid As Ever. I've Used Jb Weld For A Variety Of Other Projects Binding Metal To Metal Wood To Metal Wood To Plastic Wood To Wood Etc. And It's Done The Job Every Time.

T. Rochelle, South Gloucestershire

J-B WELD 8265S COLD WELD STEEL REINFORCED EPOXY WITH HARDENER, 2 OZ Features
Brand :    j-b weld
Size :    2 oz
Weight :    0.17 pounds
Model :    8265S
Quantity :    1
Order click here :    normally ships in 24 hours
Home Improvement :    Best Auto Accessory (Home Improvement) reviews for J-B Weld 8265S Cold Weld Steel Reinforced Epoxy with Hardener, 2 oz available as-of ( Dec 2019 )
Waterproof, petroleum, chemical, and acid resistant when fully curedEasy to use, cures to dark gray, Use on automotive, brick, concrete, metal, Will set in 4-6 hours, and cure in 16-24 hoursStong and nontoxic after it has set and temperature resistant up to 500F, Tensile strength is 3,960 PSIIncludes 1 fl. oz. of steel-reinforced epoxy and 1 fl. oz. of hardenerCan be drilled, tapped, machined, filed, sanded and painted

J-B Weld 50132 PlasticWeld Quick-Setting Epoxy Syringe - Dries Off-White - 25 ml

J-b Weld Plasticweld Syringeplasticweld Is A Specially Formulated Two-part Adhesive And Epoxy Filler System That Provides For Strong Lasting Repairs. Plasticweld Will Bond A Variety Of Surfaces Such As Metal Composites Fiberglass And Others. Plasticweld Sets In 5 Minutes At Room Temperature And Is Fully Cured In 1 Hour. Using A 1:1 Mixing Ratio Plasticweld Combines To A Tensile Strength Of 3200 Psi And Cures To An Off-white Color. Use On:automotiveceramicepoxy And Adhesivesfiberglassplastic/composite/pvcand Moreinstructions1. Prepare: Clean Repair Area Of Dirt Grease Oil Paint Rust Etc. 2. Mix: After Removing The Replaceable Cap Press Down On Plunger And Squeeze Equal Amounts Onto A Disposable Surface And Mix Thoroughly. 3. Apply: Apply With Appropriate Tool In An Even Coat Weld Bead Or Extruded Shape As Needed. 4. Dry: Sets In 5 Minutes. Cures In 1 Hour. If Temperature Is Below 40 Degrees Fahrenheit Then Set Time Is Longer. J-b Weld Is Proudly Made In The Usa

J-B Weld 50132 PlasticWeld Quick-Setting Epoxy Syringe - Dries Off-White - 25 ml

J-B-Weld-50132-PlasticWeld-Quick-Setting

J-B WELD 50132 PLASTICWELD QUICK-SETTING EPOXY SYRINGE - DRIES OFF-WHITE - 25 ML Advantages
Brand :    j-b weld
Color :    Clear
Size :    25 ml
Weight :    0.10 pounds
Model :    50132
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (Automotive Parts And Accessories) reviews for J-B Weld 50132 PlasticWeld Quick-Setting Epoxy Syringe - Dries Off-White - 25 ml available as-of ( Dec 2019 )
Off-white drying epoxy sets in 5 minues and cures in 1 hourGreat for most hard plastics, ABS, fiberglass, pvc, glass, vinyl and most compositesJ-B Weld is proudly made in the USATensile strength of 3200 PSI for a strong, permanent bondNo mess, no waste cap screws on one way to eliminate accidental mixing and ensure it won't dry out
J-b Weld 50176 Kwikweld Steel Reinforced Epoxy Syringe - Dries Dark Grey - 25 Ml (J B Weld) Price : 4.36, was : 6.54 as 2017-01-18
USUKDEFRESITJPCNCAGlobal
United States
Great Britain
German
France
Spain
Italy
Japan
China
Canada
World Wide
J-b Weld 50176 Kwikweld Steel Reinforced Epoxy Syringe - Dries Dark Grey - 25 Ml (J B Weld) Reviewed by on jerdus.com

Top j-b weld 50176 kwikweld steel reinforced epoxy syringe - dries dark grey - 25 ml (j b weld) Content

The F.A.Q. for J-b Weld 50176 Kwikweld Steel Reinforced Epoxy Syringe - Dries Dark Grey - 25 Ml (J B Weld)

With Proper Prep This Can Fix A Lot Of Things. Used It As A Temp Fix For A Broken Clamp On My Manfrotto Monopod.

A number of questions have been asked here.

Q&A

(0) Question: we put in peel and stick flooring, and there are a few gaps between boards. would this work to fill in the gaps?


(1) Question: would this work to fill a small hole in a slab of granite?


(2) Question: is this the syringe only, or does it come with the epoxy as well?


(3) Question: will this be strong enough to anchor a safe in cement ?



(note) Question: where/how to get J B Weld (manufacturer's brand) accessories & similiar J B Weld's products


Auto Accessory, BestsellersTop J-b Weld 50176 Kwikweld Steel Reinforced Epoxy Syringe - Dries Dark Grey - 25 Ml (J B Weld) FAQ Content

Best j-b weld 50176 kwikweld steel reinforced epoxy syringe - dries dark grey - 25 ml (j b weld) in review

Did Not Work Nearly As Well As The Original Formula. Now It Does Say On The Carton That This Product Does Have Less Strength Than The Original But I Would Call This A Lightweight Adhesive. The Original Overnight-dry Formula. That's The Bomb! Feels Like Steel When Dry.

G. Elanor, Norfolk

You might like to see J-b Weld 8281 Professional Size Steel Reinforced Epoxy Twin Pack - 10 Oz Auto Accessory 8281
  • Listed: For strong permanent repairs on automotive, plumbing, marine, crafts and other projects
  • Listed: Stays pliable for 30 minutes after mixing, sets in 4-6 hours and cures fully in 15-24 hours
  • Listed: Can be formed, drilled, ground, tapped, machined, filled, sanded and painted
j-b weld 8281 professional size steel reinforced epoxy twin pack - 10 oz: j b weld auto accessory j-b weld original cold-weld formula steel reinforced J-b Weld 8281 Professional Size Steel Reinforced Epoxy Twin Pack - 10 Oz (J B
Or you might like to consider J-b Weld 8270 J-b Kwik Industrial Professional Size - 10 Oz Auto Accessory 8270
  • Addition: The product is 10OZ Pro Weld Compound
  • Addition: Easy to use
  • Addition: The product is manufactured in China
j-b weld 8270 j-b kwik industrial professional size - 10 oz: j b weld auto accessory j-b weld kwikweld quick setting steel reinforced epoxy. . j-b kwikweld J-b Weld 8270 J-b Kwik Industrial Professional Size - 10 Oz (J B

Z. Valdez, Thurrock says

Jb weld is one of the best products for bonding out there. It worked like a champ.

R. Carol, Arizona

Does what it says it will

W. Josephine, Texas says

Works great

E. Patricia, Maryland

As described

E. Maria, Oldham says

Such A Great Way To Store And Dispense Epoxy When Only Small Amounts Are Needed Infrequently. I Work With Some Small Hobby Projects That Require Only A Dime Sized Portion Of Epoxy Every Once In A While And This Tube Keeps It Simple. Dispenses The Identical Amount Of Epoxy And Hardener At The Same Time. The Cap Also Closes In A Way That Keeps The Tips Clean And Free From Clogging So It's Ready To Use The Next Time.

Z. Parker, Arizona

Great Stuff. I Had Several Pieces Of Concrete Garden Art That Needed Repair And This Easily Did The Job. The Only Drawback Was That I Had A Substantial Amount Of Repair To Do And Could Have Easily Used Tubes Twice The Size Of These. I Will Purchase Again.

H. Barbara, Sefton says

Highly Effective In Every Application I Have Tried Thus Far. Not A Bad Price But An Excellent Value Considering All The Different Things I've Done With This (from Fixing/repairing To Inventing/creating). The Seal Remains Intact And The Fluids Have Not Dried Out Yet Despite Being Stored In A Hot Garage In Central Texas! Great Product.

C. Walsh, District of Columbia

Good stuff , fixed my lazy boy handle that kept coming off

A. Lorenz, Berlin says

It's jb weld! nothing beats it.

Q. Medina, North Dakota

Been Using Jb For Decades. Put A $1000 Motorcycle Fairing Back Together After A Fall. 8yrs Later Still Good. Lots Of Came Apart Mends Like Garden Tools Furniture Etc. On Tiny Projects Put Some On Business Card And Apply With Toothpick. It Is Feaible To Hold Parts Together Until Glue Sets. One Handy Trick Cut A Piece Of Plastic Bag Out Of Sandwich Zip Bag. Apply Jb Around Two Pieces Being Glued Then Carefully Wrap Strip Of Sheet Plastic Over Jb Glue Smoothing Out Joint. After Hardened Peel Plastic Off For Smooth Joint. Happy Trails

P. Theresa, Essex says

No Need For A Thorough Review Here. The People Who Have Discovered This Swear By It. I Remember When I Was A Kid We Patched A Leaking Oil Pan With Jb Weld After I Accidentally Drove Over A Curb And Sliced It Open. The Jb Weld Actually Held The Oil In For Another 60k Miles Before We Sold The Car. It's Great Stuff. Most Recently I Purchased It To Secure My Dishwasher In Place Under The Marble Counter Top. The Sticky Pads That The Dishwasher Came With Were Too Weak To Hold The Machine In Place. As Expected It's Totally Secure Now. Follow The Instructions And You Can't Go Wrong With This Stuff.

O. Gilmore, Leicestershire

Had A Broken Cast Metal Leg On A Small Table. It Could Have Been Welded A A Cost Of More Than The Table Cost. This Product Was Extremely Easy To Mix And Apply And Within An Hour Was Very Hard. I Applied It Primarily Around The Outside Of The Break. The Next Day It Was Virtually Indestructible. Really A Good Product.



Leave a Reply

You must be logged in to post a comment.


Top j b weld 50176 kwikweld reinforced Review Content

Related Products

Product Image Gallery

Top-j-b-weld-50176-kwikweld-reinforced-417709eu5zma-Content