J-b Weld 8265s Cold Weld Steel Reinforced Epoxy Hardener, 2 Oz (J B Weld) 4175

Review for j b weld 8265s reinforced hardener

Price was $3.11. The professional size jb weld is the absolute best product to repair your broken items. I recently purchased this to repair a broken vaporizer, and it worked much better than any other product i had tried, including cyanoacrylate (krazy glue) and a few other single bottle solutions. . I once used it as a temporary repair for a leaky radiator, but the repair was actually permanent as i never again had a leak. You might want to go ahead and start off with the larger size, since it is much more cost effective.

-R. Julia

J-b Weld 8265s Cold Weld Steel Reinforced Epoxy Hardener, 2 Oz Auto Accessory 8265s

  1. Advantages: Stong and nontoxic after it has set and temperature resistant up to 500F, Tensile strength is 3,960 PSI
  2. Advantages: Easy to use, cures to dark gray, Use on automotive, brick, concrete, metal, Will set in 4-6 hours, and cure in 16-24 hours
  3. Advantages: Includes 1 fl. oz. of steel-reinforced epoxy and 1 fl. oz. of hardener

J-b-weld-8265s-reinforced-hardener: J B Weld Auto Accessory J-b Weld Original Cold-weld Formula Steel Reinforced Epoxy. . J-b Weld Is The Original Cold

Buy Now

Content

Includes 1 Fl. Oz. Of Steel-reinforced Epoxy And 1 Fl. Oz. Of Hardener, Easy To Use, Cures To Dark Gray, Use On Automotive, Brick, Concrete, Metal, Will Set In 4-6 Hours, And Cure In 16-24 Hours, Stong And Nontoxic After It Has Set And Temperature Resistant Up To 500F, Tensile Strength Is 3,960 PSI, Waterproof, Petroleum, Chemical, And Acid Resistant When Fully Cured, Can Be Drilled, Tapped, Machined, Filed, Sanded And Painted, Advantages J-B Weld 8265S Cold Weld Steel Reinforced Epoxy with Hardener, 2 oz.

Attribute: J-b Weld 8265s Cold Weld Steel Reinforced Epoxy Hardener, 2 Oz

Automotive J-b Weld 8265s Cold Weld Steel Reinforced Epoxy Hardener, 2 Oz 8265s Bestseller Home Improvement 043425006554 J B Weld, J-b Weld 8265s Cold Weld Steel Reinforced Epoxy Hardener, 2 Oz 0971473137824. j-b weld original cold-weld formula steel reinforced epoxy. . j-b weld is the original cold weld two-part epoxy system that provides strong lasting repairs to metal and multiple surfaces. mixed at a ratio of 1:1 it forms a permanent bond and can be shaped tapped filed sanded and drilled after curing. at room temperature j-b weld sets in 4-6 hours to a dark grey color. a full cure is reached in 15-24 hours. j-b weld has a tensile strength of 3960 psi and sets to a hard bond overnight. it can withstand temperatures up to 550f when fully cured. . . use on:automotivebrickconcreteepoxy and adhesivesfiberglassmetaland more. instructions. . 1. prepare: clean surface area of dirt grease oil paint or loose debris. for best results use a detergent or degreaser to first clean the surface then roughen surface with file or coarse sandpaper to provide the best repair. . 2. mix: squeeze equal parts from each tube onto a disposable surface and mix thoroughly. . 3. apply: apply with appropriate tool in an even coat weld bead or extruded shape as needed. . 4. dry: sets in 4-6 hours. cures in 15-24 hours. allow 4-6 hours before handling and 15 hours (minimum) before putting object back in use. . . j-b weld is proudly made in the usa J-b Weld 8265s Cold Weld Steel Reinforced Epoxy Hardener, 2 Oz Auto Accessory 8265s.

J-B Weld 8265S Cold Weld Steel Reinforced Epoxy with Hardener, 2 oz Overview (8265S)

J-b Weld 8265s Cold Weld Steel Reinforced Epoxy Hardener, 2 Oz

  • Order : Automotive
  • Brand : J-B Weld
  • ClothingSize : 1-Pack
  • EAN : 0971473137824
  • Manufacturer : J-B WELD CO
  • Recommended Max-Age : 1440
  • Suggested Min-Age : 168
  • ManufacturerPartsWarrantyDescription : Parts
  • Model : 8265S
  • MPN : 8265S
  • Total Items : 1
  • Quantity : 1
  • Part Number : 8265S
  • Group : Home Improvement
  • Category : AUTO ACCESSORY
  • ReleaseDate : 2012-08-17
  • Size : 2 Oz
  • Title : J-B Weld 8265S Cold Weld Steel Reinforced Epoxy With Hardener, 2 Oz
  • UPC : 043425006554

Attribute J-b-weld-8265s-reinforced-hardener

J B Weld Co Automotive 8265s: J-B Weld 8265S Cold Weld Steel Reinforced Epoxy with Hardener, 2 oz

  • Stong And Nontoxic After It Has Set And Temperature Resistant Up To 500F, Tensile Strength Is 3,960 PSI
  • Easy To Use, Cures To Dark Gray, Use On Automotive, Brick, Concrete, Metal, Will Set In 4-6 Hours, And Cure In 16-24 Hours
  • AP Products SR-213/90213 Professional Holding Tank Repair Kit
  • Includes 1 Fl. Oz. Of Steel-reinforced Epoxy And 1 Fl. Oz. Of Hardener
  • J-B Weld 8276 KwikWeld Quick Setting Steel Reinforced Epoxy - 2 Oz
  • XS Sight Systems SG-2003-3 Big Dot Trituim Express Front Sight With Plain Barrel Shotgun
  • J-B Weld 8267-S SteelStik Steel Reinforced Epoxy Putty Stick - 2 Oz
  • J-B Weld 50112 Clear 25 Ml ClearWeld Quick-Setting Epoxy Syringe
  • Blue Magic 16002TRI QuikSteel Steel Reinforced Epoxy Putty Repair, Blister Pack - 2 Oz.
  • J-B Weld 50101 MinuteWeld Instant-Setting Epoxy Syringe - Dries Clear - 25ml
  • Devcon 52345 Plastic Steel Epoxy - 1 Oz. 2 Part Tube
  • Loctite Metal And Concrete Epoxy Syringe, 25-Millileters (1919325)
  • J-B Weld 8277 WaterWeld Underwater Epoxy Putty - 2 Oz
  • Loctite Blue 242 Threadlocker 6-Milliliter Tube (209728)
Top Rated

Can i curse on this review. How about the word dammit. Because, dammit this stuff works amazing! . . I mean, what planet is this stuff from? proof that we've been to the moon! harvest more of that amazing stuff and build everything out of it!

j-b-weld-8265s-reinforced-hardener
Click to see NoticeJ-b Weld 8265s Cold Weld Steel Reinforced Epoxy Hardener, 2 Oz (J B Weld)"It's Like My Lincoln Arc Welder Set At 75 Amps And Yet In A Bottle. Er Tube Use An Old Piece Of Cardboard From The Online Store Box It Comes In. Squirt Out Two Lines Of Goop Two Inches Long Each Line. Close Together. Mix The White Goop With The Black Goop Using A Toothpick Or Soda Straw And Then Place The Gray Mixture Where You Want The Weld Made. Wait 24 Hours And You Have Weld Spot. Drill It If You Want. It's Magic. Test The Extra Goop On The Straw Every 30 Minutes If You Are Nosey And Cannot Follow These Instructions. I Did. They Make One For Plastic Too. I Needed To Drill For Screws On My Weld So I Used This."

Arc Welding Equipment » Cable » Clamps » Gas Welding Equipment » MIG Welding Equipment » Plasma Cutting Equipment » Spot Welding Equipment » TIG Welding Equipment » Tip Cleaners » Welding Wire »

AP Products SR-213/90213 Professional Holding Tank Repair Kit

A Professional Holding Tank Repair Kit For Your Rv Boat Or Motorhome. Repairs Holes Or Cracks Up To 15" In Length In Less Than 20 Minutes. Kit Contains 3 Epoxy Pouches For Either Larger Or Multiple Repairs; Sandpaper 15" Fiberglass Cloth And Application Brush Are Included.

AP Products SR-213/90213 Professional Holding Tank Repair Kit

Products-SR-213-Professional-Holding-Repair

AP PRODUCTS SR-213/90213 PROFESSIONAL HOLDING TANK REPAIR KIT Benefits
Brand :    a p products
Weight :    0.37 pounds
Model :    SR-213
Quantity :    1
Order click here :    -
Biss :    Best Auto Accessory (a p products) reviews for AP Products SR-213/90213 Professional Holding Tank Repair Kit available as-of ( Oct 2019 )
IDEAL FOR ANY PLASTIC HOLDING TANKSAND, MIX AND APPLYPART# 96029FAST - EASY - PERMANENTCOMPLETE REPAIR IN 20 MINUTES

J-B Weld 8277 WaterWeld Underwater Epoxy Putty - 2 oz

J-b Weld Waterweld Epoxy Puttywaterweld Will Plug Or Seal Leaks And Patch Holes And Cracks In Almost Anything. Ideal For Repairing Plumbing Fuel Tanks Tub And Shower Drains Pool And Spa Boats And Potable Water Tanks; Setup Occurs Even Under Water. After Curing It Can Be Drilled Tapped Filed Sanded And Painted. Waterweld Has A Set Time Of 15-25 Minutes And Sets Hard In One Hour. Waterweld Cures To An Off-white Color Is Rated At A Tensile Strength Of 900 Psi And Will Withstand Temperatures Up To 300 Degrees F. Use On:automotiveceramicfiberglassmetalplastic/composite/pvcunder Water/wetand Moreinstructions1. Cut:remove Required Amount Of Putty. 2. Mix: Thoroughly Knead Putty With Fingers To A Uniform Color. 3. Apply: Press Putty Firmly To The Surface To Be Repaired. J-b Weld Is Proudly Made In The Usa

J-B Weld 8277 WaterWeld Underwater Epoxy Putty - 2 oz

J-B-Weld-8277-WaterWeld-Underwater

Review from X. Paula, Trafford I Used This To Repair A Leaking Shower Door. The Metal Track The Door Slides Along Had A Gap In One Of The Corners That Water Was Able To Seep Through And Leak Onto The Floor. I Tried Caulking It To No Avail. Waterweld Finally Solved The Issue And It Has Been Holding Up Very Nicely Even When Water Pool In The Area.

J-b Weld 8277 Waterweld Underwater Epoxy Putty - 2 Oz (J B Weld) Review

Review from T. Peggy, Rutland 
I Purchased This Item To Repair A Stand Up Shower Railing. The Bolts Had Rusted And Through Wear Had Made A Hole In The Plastic Surround. I Covered Both The Nuts And Bolts With The Putty And Filled The Gap Gently Spreading The Putty. I Let It Set Overnight And It Fixed My Issue.
J-B-WELD-8277-WATERWELD-UNDERWATER-EPOXY-PUTTY---2-OZ-(J-B-WELD)
Image of J-b-weld-8277-waterweld-underwater-epoxy-putty---2-oz-(j-b-weld)"This Stuff Did Exactly What They Said - Cured Very Quickly Did So W/ Part Of It Underwater And Was About As Easy As I Could Imagine To Cover The Crack. Reminded Me Of The Old Pool Putty I Used To Slap On Just About Any Problem I Had Back In The Day - Only They Seem To Have Improved The Forumla Quite A Bit Since Then."

I Tried To Use This To Fix A Slow Leak On A Toilet Feed Line. The Leak Was About A Drop Every Five Seconds. I Turned The Water Off Allowed Everything To Drip Out Dried The Pipes With A Hair Dryer And Followed The Directions To Try To Stop The Leak. It Did Not Help. Probably It's Difficult To Stop This Sort Of Leak With This Type Of Leak In A Feed Vs. A Drain Line. As The Manufacturer Notes Sometimes The Pipe Is So Bad Putty Is The Wrong Solution. The Pipes Are C. 1928 So Plenty Old But I Was Hoping For More. Your Mileage Will Definitely Vary.

K. Weber, Missouri

J-b Weld Has Done It Again! I Have Used This Product On Gas Tanks Water Tanks And Even My Leaky Kitchen Faucet. Whether You Do Or Don't Follow The Directions To The Letter This Stuff Works. The Gas Tank I Used It On Was Dripping Gas Down My Arm When I Applied The Repair. Two Years Later And The Leak Is Still Sealed.

M. Sheila, Oklahoma

J-B WELD 8277 WATERWELD UNDERWATER EPOXY PUTTY - 2 OZ Advantages
Brand :    j-b weld
Color :    Off White
Size :    2 oz
Weight :    0.5 pounds
Model :    8277
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Home (Automotive Parts And Accessories) reviews for J-B Weld 8277 WaterWeld Underwater Epoxy Putty - 2 oz available as-of ( Oct 2019 )
Plugs holes and makes permanent repairsFully cures in 20-30 minutesWorks on moist surfaces and under waterGreat for plumbing, tub, shower and drainsSets in 30 minutes and paintable in 1 hourUse on automotive, ceramic, fiberglass, metal

Loctite Blue 242 Threadlocker 6-Milliliter Tube (209728)

Loctite Threadlocker Blue 242 Is Designed For The Locking And Sealing Of Threaded Fasteners Which Require Normal Disassembly With Standard Hand Tools. Prevents Loosening Of Metal Fasteners Caused By Vibrations.

Loctite Blue 242 Threadlocker 6-Milliliter Tube (209728)

Loctite-Blue-Threadlocker-6-Milliliter-209728

LOCTITE BLUE 242 THREADLOCKER 6-MILLILITER TUBE (209728) Benefit
Brand :    henkel
Color :    Blue 242
Size :    Single
Weight :    0.1 pounds
Model :    209728
Quantity :    1
Order click here :    normally ships in 24 hours
Home Improvement :    Best Building Material (henkel) reviews for Loctite Blue 242 Threadlocker 6-Milliliter Tube (209728) available as-of ( Oct 2019 )
Sets in 20 minutes; cures in 24 hoursPrevents leaks and rusting of threads for 1/4-inch to 3/4-inch (6mm to 20mm) nuts and boltsMetal parts are removable with hand tools for easy disassemblyUseful for small motors, mowers, and power equipmentThreadlocker Blue 242 locks threaded metal fasteners against vibration loosening

Loctite Metal and Concrete Epoxy Syringe, 25-Millileters (1919325)

Loctite Epoxy Metal/concrete Is A Two-part System Consisting Of An Epoxy Resin And A Hardener. The Convenient Syringe Dispenses Equal Amounts Of Each Component Every Time. When Mixed In Equal Volumes Resin And Hardener React To Produce A Tough Rigid High Strength Bond In 5 To 12 Minutes. It Is Used As An Adhesive For Repairing Filling And Rebuilding All Metal And Concrete Surfaces. Loctite Epoxy Metal/concrete Does Not Conduct Electricity Which Is Ideal For Sealing Electrical Components. It Cures To A Metallic Gray Finish And Can Be Easily Sanded Or Machined. It Does Not Shrink And Is Resistant To Water And Most Common Solvents.

Loctite Metal and Concrete Epoxy Syringe, 25-Millileters (1919325)

Loctite-Concrete-Syringe-25-Millileters-1919325

LOCTITE METAL AND CONCRETE EPOXY SYRINGE, 25-MILLILETERS (1919325) Features
Brand :    loctite
Color :    Gray
Size :    Single
Model :    1919325
Quantity :    1
Order click here :    normally ships in 24 hours
Home Improvement :    Best Building Material (loctite) reviews for Loctite Metal and Concrete Epoxy Syringe, 25-Millileters (1919325) available as-of ( Oct 2019 )
Water resistant - great for interior or exterior projectsMachinable - will not crack when drilledWill not conduct electricity and can be used for sealing electrical componentsWill not shrink or expand - one-time applicationConvenient syringe dispenses equal amounts of each component every time

Devcon 52345 Plastic Steel Epoxy - 1 oz. 2 Part Tube

Devcon Plastic Steel Epoxy Is A Two-part High Strength Cold-welding Epoxy For Use On All Types Of Metal Repairs. Non-flammable And Water-resistant This Epoxy Contains A Steel Alloy That Will Not Rust. Fills Holes And Repairs Cracks In Broken Furniture Tools Appliances Toys Cars And More. Dries To A Dark Gray Color And Once Fully Cured It Can Be Drilled Threaded Machined Or Filled. Bonds All Metals Including Steel Stainless Steel Aluminum Brass Iron Pewter And Copper With A Tensile Strength Of 2500 Psi. Only Mix The Amount Of Hardener And Resin Together That Can Be Used Within The Handling Time And Always Mix Equal Portions Of The Hardener And Resin Thoroughly Together In Order For This Product To Cure Properly. Epoxies Are Generally Not Recommended For Long Term Exposure To Chemicals And Solvents. Temperature Range: 200f Constant; 250f Intermittent.

Devcon 52345 Plastic Steel Epoxy - 1 oz. 2 Part Tube

Devcon-52345-Plastic-Steel-Epoxy

DEVCON 52345 PLASTIC STEEL EPOXY - 1 OZ. 2 PART TUBE Features
Brand :    devcon
Color :    Dark Gray
Size :    1 Ounce, (SingleUnit)
Weight :    0.1 pounds
Model :    52345
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (devcon) reviews for Devcon 52345 Plastic Steel Epoxy - 1 oz. 2 Part Tube available as-of ( Oct 2019 )
Contains a steel alloy that will not rusttwo-part, high strength, cold-welding epoxy for use on all types of metal repairsNon-flammable and water-resistantHandling time: 60 minutes; Set time: 6 hours; Cure time: 16-24 hoursCan be drilled, threaded, machined or filled once fully cured

J-B Weld 50101 MinuteWeld Instant-Setting Epoxy Syringe - Dries Clear - 25ml

J-b Weld Minuteweld Syringeminuteweld Is A Special Formulated High-strength Two-part Instant Setting Epoxy. Minuteweld Will Set Under Most Temperature Conditions In One Minute. Minuteweld Is Designed To Adhere To Multiple Surfaces And Can Be Used On Ceramic Tile Glass Stone Most Plastics Wood And Metal. Use On:automotiveceramiccloth/carpetepoxy And Adhesivesfiberglassplastic/composite/pvcand Moreinstructions1. Prepare: Clean Surface Area Of Dirt Grease Oil Paint Or Loose Debris. For Best Results Use A Detergent Or Degreaser To First Clean The Surface Then Roughen Surface With File Or Coarse Sandpaper To Provide The Best Repair. 2. Mix: After Removing The Replaceable Cap Press Down On Plunger And Squeeze Equal Amounts Onto A Disposable Surface And Mix Thoroughly. 3. Apply: Apply With Appropriate Tool In An Even Coat Weld Bead Or Extruded Shape As Needed. 4. Dry: Sets In 1 Minute. Cures In 1 Hour. If Temperature Is Below 40 Degrees Fahrenheit Then Set Time Is Longer. J-b Weld Is Proudly Made In The Usa

J-B Weld 50101 MinuteWeld Instant-Setting Epoxy Syringe - Dries Clear - 25ml

J-B-Weld-50101-MinuteWeld-Instant-Setting

J-B WELD 50101 MINUTEWELD INSTANT-SETTING EPOXY SYRINGE - DRIES CLEAR - 25ML Feature
Brand :    j-b weld
Size :    25 Milliliter
Weight :    0.30 pounds
Model :    50101
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (j-b weld) reviews for J-B Weld 50101 MinuteWeld Instant-Setting Epoxy Syringe - Dries Clear - 25ml available as-of ( Oct 2019 )
Tensile strength of 2850 PSI for a strong, permanent bondNo mess, no waste cap screws on one way to eliminate accidental mixing and ensure it won't dry outJ-B Weld is proudly made in the USAClear, instant setting two-part epoxy sets in 1 minute and cures in 1 hourGreat for tile, most plastics, ceramic, glass and more

XS Sight Systems SG-2003-3 Big Dot Trituim Express Front Sight with Plain Barrel Shotgun

Highly Visible Tritium Dot Front Sight Surrounded By A Large White Ring Epoxies Over The Existing Front Bead Sight To Help Improve Target Focus And Low Light Sight Acquisition And Sight Recovery After Muzzle Flash. Installs Over Front Sight Beads From. 125" -. 140" Diameter By Filling The Cavity On The Underside Of The Sight With Brownells Acraglas Gel Then Pressing The Sight Over The Bead And Allowing It To Fully Cure. If Existing Bead Is Too Small Or Too Large Replace With Brownells 6 Bead For 3-56 Threads Or 26 For 6-48 Threads. Some Shotgun Barrels May Require Drilling And Tapping Of Existing Hole To 6-48 For Installation Of 26 Brownells Bead. Remington Pedestal Model With Stepped Bottom Fits Remington Shotgun Barrels With Front Sight Pedestal. Vent Rib Model With Flat Bottom Fits Shotgun Barrels With Ventilated Ribs. Plain Barrel Model With Cupped Bottom Fits Round Shotgun Barrels. Specifications: - Fits: Remington Universal Shotguns - Sight Color: White - Style: Tritium Beads - Finish: Matte Black.

XS Sight Systems SG-2003-3 Big Dot Trituim Express Front Sight with Plain Barrel Shotgun

XS-Sight-Systems-SG-2003-3-Trituim

XS SIGHT SYSTEMS SG-2003-3 BIG DOT TRITUIM EXPRESS FRONT SIGHT WITH PLAIN BARREL SHOTGUN Benefits
Brand :    xs sight systems
Color :    Black
Weight :    0.15 pounds
Model :    SG-2003-3
Quantity :    1
Order click here :    normally ships in 24 hours
Sports :    Best Sporting Goods (Sports) reviews for XS Sight Systems SG-2003-3 Big Dot Trituim Express Front Sight with Plain Barrel Shotgun available as-of ( Oct 2019 )
Style: Tritium BeadsFinish: Matte BlackFits: Remington Universal Shotguns

J-B Weld 50112 Clear 25 ml ClearWeld Quick-Setting Epoxy Syringe

J-b Weld Clearweld Syringeclearweld Is A Quick Setting Multipurpose Two Part Epoxy That Provides A Strong And Lasting Bond On Most Surfaces Including Tile Most Plastics Ceramic Glass Wood And Metal. Clearweld Is Designed To Cure With A Clear Transparent Bond When Used At Thicknesses Of Less Than 15 Mil. Clearweld Has A 1:1 Mixing Ratio Sets In 5 Minutes And Cures In 1 Hour. With A Tensile Strength Of 4400 Psi Clearweld Sets To A Hard Permanent Bond. Use On:automotivebrickceramiccloth/carpetconcreteepoxy And Adhesivesfiberglassglassplastic/composite/pvcand Moreinstructions1. Prepare: Clean Surface Area Of Dirt Grease Oil Paint Or Loose Debris. For Best Results Use A Detergent Or Degreaser To First Clean The Surface Then Roughen Surface With File Or Coarse Sandpaper To Provide The Best Repair. 2. Mix: After Removing The Replaceable Cap Press Down On Plunger And Squeeze Equal Amounts Onto A Disposable Surface And Mix Thoroughly. 3. Apply: Apply With Appropriate Tool In An Even Coat Weld Bead Or Extruded Shape As Needed. 4. Dry: Sets In 5 Minutes. Cures In 1 Hour. If Temperature Is Below 40 Degrees Fahrenheit Then Set Time Is Longer. J-b Weld Is Proudly Made In The Usa

J-B Weld 50112 Clear 25 ml ClearWeld Quick-Setting Epoxy Syringe

J-B-Weld-50112-ClearWeld-Quick-Setting

J-B WELD 50112 CLEAR 25 ML CLEARWELD QUICK-SETTING EPOXY SYRINGE Features
Brand :    j-b weld
Color :    Clear
Size :    1-Pack
Weight :    0.10 pounds
Model :    50112
Quantity :    1
Order click here :    normally ships in 1-2 business days
Automotive Parts And Accessories :    Best Auto Accessory (Automotive Parts And Accessories) reviews for J-B Weld 50112 Clear 25 ml ClearWeld Quick-Setting Epoxy Syringe available as-of ( Oct 2019 )
Tensile strength of 4400 PSI for a strong, permanent bondJ-B Weld is proudly made in the USANo mess, no waste cap screws on one way to eliminate accidental mixing and ensure it won't dry outCrystal clear epoxy sets in 5 minutes and cures in 1 hourGreat for tile, most plastics, ceramic, glass, wood, metal and more

Blue Magic 16002TRI QuikSteel Steel Reinforced Epoxy Putty Repair, Blister Pack - 2 oz.

Cargo Quiksteel Epoxy Putty With Stands Up To 500 Degrees Fahrenheit Temperatures Sets In 5 Minutes Is Steel Hard In 15 Minutes And Cures In One Hour. Cures Under Water And Can Be Drilled Tapped Filed Sanded And Painted. Bonds To All Metals Fiberglass Plastics Glass Wood And Ceramics.

Blue Magic 16002TRI QuikSteel Steel Reinforced Epoxy Putty Repair, Blister Pack - 2 oz.

Blue-Magic-16002TRI-QuikSteel-Reinforced

BLUE MAGIC 16002TRI QUIKSTEEL STEEL REINFORCED EPOXY PUTTY REPAIR, BLISTER PACK - 2 OZ. Spotlight
Brand :    blue magic
Size :    2 Ounce
Weight :    0.15 pounds
Model :    16002
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (blue magic) reviews for Blue Magic 16002TRI QuikSteel Steel Reinforced Epoxy Putty Repair, Blister Pack - 2 oz. available as-of ( Oct 2019 )
Drinking water safe, NSF-61QuikSteel reinforced epoxy putty, 2 ounceSets in 5 minutes, cures in 1 hourWithstands up to 500 degree Fahrenheit temperaturesHardens like steel, can be drilled, tapped, filed, sanded and painted

J-B Weld 8267-S SteelStik Steel Reinforced Epoxy Putty Stick - 2 oz

J-b Weld Steelstik Epoxy Putty Sticksteelstik Is A Hand-mixable Steel-reinforced Non-rusting Epoxy Putty That Quickly Repairs Or Rebuilds Anything Made Of Metal. After Mixing It Forms An Industrial-strength Polymer Compound That Can Be Molded Into Shapes Or Used To Build Up Patch And Repair Steel Components. Steelstik Sets In 3-5 Minutes And After 60 Minutes Can Be Drilled Tapped Machined Ground Filed And Painted. Steelstik Cures To A Dark Grey Color Is Rated At A Tensile Strength Of 900 Psi And Will Withstand Temperatures Up To 300 Degrees F. Use On:automotivebrickceramicconcretemetalunder Water/wetand Moreinstructions1. Cut:remove Required Amount Of Putty. 2. Mix: Thoroughly Knead Putty With Fingers To A Uniform Color. 3. Apply: Press Putty Firmly To The Surface To Be Repaired. J-b Weld Is Proudly Made In The Usa

J-B Weld 8267-S SteelStik Steel Reinforced Epoxy Putty Stick - 2 oz

J-B-Weld-8267-S-SteelStik-Reinforced

J-B WELD 8267-S STEELSTIK STEEL REINFORCED EPOXY PUTTY STICK - 2 OZ Benefits
Brand :    j-b weld
Color :    Dark Gray
Size :    1-Pack
Weight :    0.11 pounds
Model :    8267-S
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (Automotive Parts And Accessories) reviews for J-B Weld 8267-S SteelStik Steel Reinforced Epoxy Putty Stick - 2 oz available as-of ( Oct 2019 )
Will cure on wet and dry surfaces, even completely submerged in gasoline or waterEasy and simple use kitThe product is manufactured in United statesSteel reinforced epoxy putty repairs anything made of metalCan be drilled, filed, tapped, machined and paintedThe product is steelstik epoxy stick

J-B Weld 8276 KwikWeld Quick Setting Steel Reinforced Epoxy - 2 oz

J-b Weld Kwikweld Quick Setting Steel Reinforced Epoxyj-b Kwikweld Is A Fast Setting Version Of The Original J-b Weld Two-part Epoxy Cold Weld System That Provides Strong Lasting Repairs To Metal And Multiple Other Surface Types. After Mixing It Forms A Permanent Bond And Can Be Shaped Tapped Filed Sanded And Drilled After Curing. J-b Kwikweld Has A 1:1 Mixing Ratio Sets In 6 Minutes And Is Fully Cured In 4-6 Hours. J-b Kwikweld Cures To A Dark Grey Color Is Rated At A Tensile Strength Of 2424 Psi And Will Withstand Temperatures Up To 300 Degrees F. Great For:household Repairsautomotiveplumbingmarinecrafts And Moreuse On:automotivebrickconcretefiberglassmetaland Moreinstructions1. Prepare: Clean Surface Area Of Dirt Grease Oil Paint Or Loose Debris. For Best Results Use A Detergent Or Degreaser To First Clean The Surface Then Roughen Surface With File Or Coarse Sandpaper To Provide The Best Repair. 2. Mix: Squeeze Equal Parts From Each Tube Onto A Disposable Surface And Mix Thoroughly. 3. Apply: Apply With Appropriate Tool In An Even Coat Weld Bead Or Extruded Shape As Needed. 4. Dry: Sets In 6 Minutes. Cures 4 Hours. If Temperature Is Below 40 Degrees F Then Set Time Is Longer. J-b Weld Is Proudly Made In The Usa

J-B Weld 8276 KwikWeld Quick Setting Steel Reinforced Epoxy - 2 oz

J-B-Weld-8276-KwikWeld-Reinforced

J-B WELD 8276 KWIKWELD QUICK SETTING STEEL REINFORCED EPOXY - 2 OZ Highlight
Brand :    j-b weld
Color :    White
Size :    2 oz
Weight :    0.5 pounds
Model :    8276
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (Automotive Parts And Accessories) reviews for J-B Weld 8276 KwikWeld Quick Setting Steel Reinforced Epoxy - 2 oz available as-of ( Oct 2019 )
Once cured it forms a permanent bond and can be shaped, tapped, filed, sanded and drilledSets in 6 minutes and cures dark grey in 4-6 hoursGreat for household repairs, automotive applications, crafts and moreWill withstand temperatures of up to 300 degrees FahrenheitFast setting version of The Original J-B Weld two-part epoxy cold weld systemRated at a tensile strength of 2424 PSI
J-b Weld 8265s Cold Weld Steel Reinforced Epoxy Hardener, 2 Oz (J B Weld) Price : 3.4, was : 4.31 as 2017-01-18
USUKDEFRESITJPCNCAGlobal
United States
Great Britain
German
France
Spain
Italy
Japan
China
Canada
World Wide
J-b Weld 8265s Cold Weld Steel Reinforced Epoxy Hardener, 2 Oz (J B Weld) Reviewed by on jerdus.com

Top j-b weld 8265s cold weld steel reinforced epoxy hardener, 2 oz (j b weld) Content

The F.A.Q. for J-b Weld 8265s Cold Weld Steel Reinforced Epoxy Hardener, 2 Oz (J B Weld)

J-b Weld Is My Go To Glue For Repairs In Everything But Wood. I Use Plain Old Wood Glue For That But Every Other Material (or If There Are Multiple Materials) I Use J-b Weld. I Like It For Plastic Or Metal Repairs On Things From Kitchen Items To Bathroom Items. This Stuff Just Holds. I Actually Have A Micro-plane That Has Held For 10 Years Since I Repaired It With J-b Weld. The Only Caveat Is That The Grey Color Is Visible And If You Don't Want That To Be Seen Then You Need To Carefully Design The Repair.

A number of questions have been asked here.

Q&A

(0) Question: block crack between cyls 5 & 7 against the head, at the narrowest point between cyls. both cyls are sleeved. will jb hold the temp without breaking do


(1) Question: i have a number of small leaks in an older aluminum boat-- would jb work for a repair on this as a weld/filler for small punctures? thanks


(2) Question: will this stop an exhaust leak right where a donut goes flanges off of the manifold? or which jb weld would work


(3) Question: can i use this item with car a/c condensator between alluminium and bronze


(4) Question: is there any way of removing hardened jb weld of soften it once it's hardened?


(5) Question: my motorcycle's clutch handle broke in half in a fall, would this be able to reunite the two pieces?


(6) Question: can this seal a air compresser tank at 125psi.has a small hole?


(7) Question: can this be used to seal leaking auto battery top- sulfuric acid resistant? i read about a masterbond epoxy for such, but $$.. thanks


(8) Question: can this seal a cracked oil pan



(note) Question: where/how to get J B Weld (manufacturer's brand) accessories & similiar J B Weld's products

Answer:

Click the marked text to copy link to Clipboard

Just Like Buying It In The Store But It Came Right To My Door. I Have Used J-b Weld A Couple Of Times And It Is Really Tough Stuff. I Used This To Fix A Laptop Case That Was Broken. The Whole Corner Where The Screen Hinge Attached Was Broken Out Where It Screwed Into The Bottom Case (clamshell). This Held It All Together So I Could Screw The Hinge In And We Are Good To Go. Not As Good As A Laptop Case That Is Well Designed But Allows You To Make Repairs When Just Replacing The Part Is Not An Options (in My Case Because It Just Would Break Again So It Needed Reinforcement).


Auto Accessory, BestsellersTop J-b Weld 8265s Cold Weld Steel Reinforced Epoxy Hardener, 2 Oz (J B Weld) FAQ Content

Best j-b weld 8265s cold weld steel reinforced epoxy hardener, 2 oz (j b weld) in review

As Others Have Stated This Is Go To Product To Attach Any Broken Parts. My Wife Broke Side View Mirror On Her Car And The Cheapest Replacement Mirror I Could Find Was $350. So Before Shelling Out The Big Bucks I Decided To Take $5 Gamble As Many Have Said This Does Not Work As Well On Plastic. Before Putting On The Adhesive I Sanded And Roughed Up The Two Adjoining Pieces And Cleaned The Area With Acetone (nail Polish Remover). After Making Sure The Area Is Completely Dry I Mixed Two Parts For About Three Minutes But Used Little More Of Hardener. After Applying The Weld I Let The Part Cure For 24 Hours And The Piece Have Held For Three Weeks So Far. This $5 Order Saved Me A Small Fortune In Getting A Replacement Part For The Car.

M. Medina, Nottinghamshire

You might like to see J-b Weld 8237 Plasticweld Plastic Repair Epoxy Putty - 2 Oz Auto Accessory 8237
  • Reviews: PlasticWeld is a hand-mixable, fast-setting epoxy putty that forms a durable bond to most major plastic types
  • Reviews: J-B Weld Kwikplastic Epoxy Putty, 2 Oz
  • Reviews: This is manufactured in United States
j-b weld 8237 plasticweld plastic repair epoxy putty - 2 oz: j b weld auto accessory j-b weld plasticweld epoxy putty. . plasticweld is a hand-mixable J-b Weld 8237 Plasticweld Plastic Repair Epoxy Putty - 2 Oz (J B
Or you might like to consider J-b Weld 8281 Professional Size Steel Reinforced Epoxy Twin Pack - 10 Oz Auto Accessory 8281
  • Listed: For strong permanent repairs on automotive, plumbing, marine, crafts and other projects
  • Listed: Stays pliable for 30 minutes after mixing, sets in 4-6 hours and cures fully in 15-24 hours
  • Listed: Can be formed, drilled, ground, tapped, machined, filled, sanded and painted
j-b weld 8281 professional size steel reinforced epoxy twin pack - 10 oz: j b weld auto accessory j-b weld original cold-weld formula steel reinforced J-b Weld 8281 Professional Size Steel Reinforced Epoxy Twin Pack - 10 Oz (J B

V. Ruby, Surrey says

I had originally ordered this item to fix the lawn mower plastic gas tank that was chewed up by the squirrels but because the way the tank was chewed up made it difficult to close the leaks and therefore did not use the epoxy. A few days later, the plastic door handle (driver side) on my '97 camry broke when i tried to pull hard on the handle. I was not optimistic this expoxy will work because the surface area on which i could apply the expoxy was very narrow. Since i had this expoxy at home i gave it a try because replacing the handle would be a lot more expensive. Anyway, i mixed a small quantity of the black and white epoxy per the instructions and let it sit for 24 hours. The handle is now firmly glued to the door and it is working just as good before it broke. I will recommend it to anyone looking for a strong epoxy glue for bonding plastic, glass or metal surfaces.

L. Kelly, Illinois

Used it to seal the exterior of a gas tank for a small tractor. Didn't last long. It got soft and the gas leaked through. Tried it several times with proper pre-treatment of the surface of the tank with the same result. I'm not sure, but i suspect it's because of the 10% ethanol in the gas that the weld isn't resistant against.

U. Wayt, Connecticut says

Works Exactly As Described. I Use It On My Composite Hockey Sticks When They Start To Break Down. Love My Easton Curves But Damnit They Have Brittle Toes And And Heals. This Gives The Stick New Life. I'm All Washed Up Now Playing Beer League But I Have Used This Stuff Even Back In The College Days.

I. Florence, Languedoc-Roussillon

Used This On Some Splitting Fabric On A Beach Chair That Could Not Be Resown. Expensive Chair So Tried This Jb On The Underside Of The Fabric. Works! Steel Reinforced Gives It Extra Toughness. Pleased As Punch. One Of The Tubes Had A Lot Of Air In It But Jb Customer Service Was Great And Mailed A Replacement Tube Plus A New Twin Pak. Love The Product Love The Company! You Will Too.

Q. Valencia, Prince Edward Island says

This product is great for what it does, but you need to know when a job is appropriate for epoxies. While the product name includes "weld, " using this is nothing like welding in application. . If you expect miracles, slathering it on smooth metal surfaces or joining parts with little surface area, you will be disappointed. This is a limitation of any adhesive. . The best application for epoxy is one where you have a lot of common surface area at the joint, and the mating surfaces are rough (you can often improve the latter through sanding or scuffing). If it is possible to fill in the product in such a way as to prevent movement due to the shape of the cured epoxy rather than solely its adhesion, that is even better. For instance, if you are trying to prevent a rod from turning inside a hole, cut notches into both. Epoxy bonds better to itself than to other materials; this is especially true with metal. . Fractured plastic where both sides of a plastic piece fit perfectly into each other is the ideal situation for the adhesion properties of epoxy. Be sure to clean out any dirt or free grit before applying. . Compared to other epoxies, this is probably one of the best. It also tends to be more expensive, so consider cheaper options depending on the requirements of the task.

Y. Erickson, New Jersey

This stuff is the real deal. By far the best epoxy that i've ever used, and i've used a lot of epoxy. This epoxy worked so well, that i reordered more the next day. . The most important thing to know about epoxy is how well you mix it. If you mix it for only one minute and think that's good enough, then think again. Most epoxys perform best (and last the longest) when mixed for a minimum of 3 minutes (some like clear coat epoxys need 6 minutes of mixing). As long as you mix this epoxy properly, then you will be very happy with its performance.

Z. Elanor, Arizona says

Bought it because i drive a hooptie and knew i'd need it someday, that time came when i saw my old timing chain had worn a hole in the timing cover. Used this to fix the hole as a matter of pride - it's so easy to find chevy parts that sometimes you have to challenge yourself.

K. Megan, Maryland

This is the strongest commonly available epoxy i use and i have used a considerable number of packets over the years. So long as the grey color does not present a problem, this is the product i would always use and recommend to anyone.

C. Matherly, Oldham says

My Nissan Altima Handle Broke When I Was Trying To Open The Door And A New One Would Cost Me Like $100+. When I Read Online - Most Folks Suggested Me Not To Use Jb Weld Since It Would Not Be Able To Sustain The Force - But It Has Been 2 Months And It Is Still Holding With All The Usage. This Product Is Really Awesome - Make Sure To Follow The Instructions.

T. Guest, Derbyshire

An amateur like me doesn't have an arc welder, so if i wanted a magic wand to wave and bond together two pieces of metal, this product would be my abracadabra presto-chango. . It is very forgiving during application. I mistakenly was in the habit of thinking glue is always quick-drying when mixed from two components, so when i started using this, i thought i had to rush. Wrong. The thing to remember when use this epoxy is to take your time and concentrate on application after mixing, because it gives you the time to do so. . It is messy, so when it is dry and you see petrified smears of it all over the place where you don't want them, i find that a grinder is the best way to clean it off metal. A torch and a file works, too. Don't let it get onto anything else. It is industrial strength, after all. . As far as cleaning your hands, that is a tremendous surprise - just soap and water works. You actually do not have to worry about getting it on your fingers while using it. . I relate this because it also seemed counter-intuitive when working with heavy-duty mega-glue. Don't be afraid to get your hands dirty - even use your fingers as an application tool, if you want. You can become a sculpturer with this. Manipulate the maleable epoxy till it looks like it forms your strongest bond, otherwise you'll be like a batter who's afraid of the ball. . Zinc jinx: i heard on "rick's restorations" that paint won't stick to galvanized metal, so the pros apply vinegar to it before painting. In my efforts, this epoxy also does not stick to galvanized steel, even after using vinegar on it. I have to grind off all the galvinization before the epoxy binds to it.

D. Melissa, Bourgogne says

It Works Well! I Repaired A Microwave Oven's Door Handle That Broke Off. I Looked First For Replacing The Handle But It Is Already Discontinued So I Turned To This Epoxy. It Worked So Well That The Door Handle Is Now A Lot Stronger Than When It Was Brand New! It Cures Overnight To A Very Strong Bond. I Like That!

T. Rochelle, South Gloucestershire

I've Yet To Have Jb Weld Fail Me. I Have A Belt Buckle That Kept On Popping Off When I Used Gorilla Or Super Glue. I Applied Jb Weld Five Months Ago And It's Still As Solid As Ever. I've Used Jb Weld For A Variety Of Other Projects Binding Metal To Metal Wood To Metal Wood To Plastic Wood To Wood Etc. And It's Done The Job Every Time.



Leave a Reply

You must be logged in to post a comment.


Top j b weld 8265s reinforced hardener Review Content

Related Products

Product Image Gallery

Top-j-b-weld-8265s-reinforced-hardener-4175006o1ice-Content