J-b Weld 8267-s Steelstik Steel Reinforced Epoxy Putty Stick – 2 Oz (J B Weld) 4179

Review for j b weld 8267 s steelstik reinforced

Price was $6.24. I Bought The J-b Weld Steelstik Steel Reinforced Epoxy Putty Stick For A Specific Purpose. I Have A 2002 Sebring Convertible. The Defogger Tabs Pop Off Over Time From The Back Glass. I Have Tried Everything To Reattach It To The Window And Nothing Holds. I Have Been Soldering It Lately And That Will Typically Last A Summer And Then It Pops Off. So I Have Been On The Lookout For Something That Was Conductive And Strong. Enter J-b Weld. I Looked Up Some Reviews On This And Found That It Was Conductive So I Took A Chance And Ordered A Tube. It Was Easy To Use. I Just Cut Off A Small Amount And Worked It With My Fingers Until It Was A Uniform Color. I Had Previously Cleaned The Tab And Glass. So I Put The Putty On The Tab And Stuck It To The Window. I Held It Their For About 5 Minutes Which Was The Set Time As Per The Instructions. After An Hour It Had Hardened. I Waited 24 Hours Before Attaching The Wire To The Metal Tab. I Could Tell That It Made A Solid Seal As The Tab Did Not Budge When I Was Attaching The Wire. The Next Morning The Dew Had Fallen So I Was Able To Test The Conductivity Of The Putty. It Is Indeed Conductive. My Rear Defogger Is Now Working Again. Pros: ---------------------------------------------------------- - Easy To Use - The Putty Is Conductive So It Works Great For Connections That Carry Voltage - Stores Easy - No Mess Cons: ---------------------------------------------------------- - None Summary: ---------------------------------------------------------- I Am Giving This Stuff 5 Stars. It Works Great For My Application And I Am Very Pleased With It. Hopefully This Will Help Someone Else That Might Be Having A Similar Issue.

-L. Connie

J-b Weld 8267-s Steelstik Steel Reinforced Epoxy Putty Stick – 2 Oz Auto Accessory 8267 S

  • Components: The product is steelstik epoxy stick
  • Components: Easy and simple use kit
  • Components: The product is manufactured in United states

j-b weld 8267-s steelstik steel reinforced epoxy putty stick – 2 oz: j b weld auto accessory j-b weld steelstik epoxy putty stick. . steelstik is a hand-mixable

Buy Now

Content

The Product Is Steelstik Epoxy Stick, Easy And Simple Use Kit, The Product Is Manufactured In United States, Steel Reinforced Epoxy Putty Repairs Anything Made Of Metal, Will Cure On Wet And Dry Surfaces, Even Completely Submerged In Gasoline Or Water, Can Be Drilled, Filed, Tapped, Machined And Painted, Sets In 5 Min, Cures In 1 Hour, Strength Of 900 PSI, Components J-B Weld 8267-S SteelStik Steel Reinforced Epoxy Putty Stick - 2 oz.

Attribute: J-b Weld 8267-s Steelstik Steel Reinforced Epoxy Putty Stick - 2 Oz

Automotive J-b Weld 8267-s Steelstik Steel Reinforced Epoxy Putty Stick - 2 Oz 8267 S Modest Automotive Parts And Accessories 079340820067 J B Weld, J-b Weld 8267-s Steelstik Steel Reinforced Epoxy Putty Stick - 2 Oz 0718767915184. j-b weld steelstik epoxy putty stick. . steelstik is a hand-mixable steel-reinforced non-rusting epoxy putty that quickly repairs or rebuilds anything made of metal. after mixing it forms an industrial-strength polymer compound that can be molded into shapes or used to build up patch and repair steel components. steelstik sets in 3-5 minutes and after 60 minutes can be drilled tapped machined ground filed and painted. steelstik cures to a dark grey color is rated at a tensile strength of 900 psi and will withstand temperatures up to 300 degrees f. . . use on:automotivebrickceramicconcretemetalunder water/wetand more. instructions. . 1. cut:remove required amount of putty. . 2. mix: thoroughly knead putty with fingers to a uniform color. . 3. apply: press putty firmly to the surface to be repaired. . . j-b weld is proudly made in the usa J-b Weld 8267-s Steelstik Steel Reinforced Epoxy Putty Stick - 2 Oz Auto Accessory 8267 S.

J-B Weld 8267-S SteelStik Steel Reinforced Epoxy Putty Stick - 2 oz Review (8267S)

J-b Weld 8267-s Steelstik Steel Reinforced Epoxy Putty Stick - 2 Oz

Rank
Automotive
Brand
J-B Weld
ClothingSize
1-Pack
Color
Dark Gray
EAN
0718767915184
HazardousMaterialType
Unknown
LegalDisclaimer
NEW & SEALED! Packaging Does Have Wear Due To Storage.
Manufacturer
J-B Weld
Suggested Min-Age
168
ManufacturerPartsWarrantyDescription
Parts
Model
8267-S
MPN
8267S
Total Items
1
Quantity
1
Part Number
8267S
Order
Automotive Parts And Accessories
Category
AUTO ACCESSORY
ReleaseDate
2004-11-05
Size
1-Pack
Title
J-B Weld 8267-S SteelStik Steel Reinforced Epoxy Putty Stick - 2 Oz
UPC
079340820067

Attribute J-b-weld-8267-s-steelstik-reinforced

J B Weld Automotive 8267 S: J-B Weld 8267-S SteelStik Steel Reinforced Epoxy Putty Stick - 2 oz

  1. The Product Is Steelstik Epoxy Stick
  2. J-B Weld 8265S Cold Weld Steel Reinforced Epoxy With Hardener, 2 Oz
  3. J-B Weld 8237 PlasticWeld Plastic Repair Epoxy Putty - 2 Oz
  4. Permatex 25909 Liquid Metal Filler, 3.5 Oz.
  5. J-B Weld 8277 WaterWeld Underwater Epoxy Putty - 2 Oz
  6. J-B Weld 8281 Professional Size Steel Reinforced Epoxy Twin Pack - 10 Oz
  7. Blue Magic 16002TRI QuikSteel Steel Reinforced Epoxy Putty Repair, Blister Pack - 2 Oz.
  8. J-B Weld 8276 KwikWeld Quick Setting Steel Reinforced Epoxy - 2 Oz
  9. PrimeSource/ 3Gs TW16312I ReBar Tie Wire
  10. Permatex 84209 PermaPoxy 4 Minute Multi-Metal Epoxy, Two 1 Oz. Tubes
  11. J-B Weld 8217 AutoWeld Gas Tank Repair - 1 Oz.
  12. Easy And Simple Use Kit
  13. The Product Is Manufactured In United States
Most Wishlist

I Love This Stuff! I Usased It In A Wet Environment And It Worked Great. Even After 4 Weeks Snd Strong Use Every Day. I Would Recommend This Product. I Just Ordered It Again. And I"ve Seen It Keep Automotive Engine (even Head Bolts). You Can Drill And Tap It. It's Your "get Out Of Jail Free" Card If You Need It. This Stuff Is Great! Just Keeep A Tube Handy! It's Very Cheap Insurance For The "oops" Moment. And It's Great Around The House Too! I've Rebullt My Shower Curtain Bracket At Least Twice A Month. Now It's As Solid As A Rock! It's Been Six Weeks And It Still Is! With No Signs Of Degradation Yet. And We Beat The Snot Outta That Thing Every Day! Great Stuff!!!

j-b-weld-8267-s-steelstik-reinforced
Click to see NoticeJ-b Weld 8267-s Steelstik Steel Reinforced Epoxy Putty Stick - 2 Oz (J B Weld)"This Putty Is The Premiere Product For Filling And Molding Jobs. While Ordinary Epoxy Hardens To A Material With A Bit Of Give This Product Becomes As Hard As Stone(it Then Becomes Odorless As Well If That Worries You). Once It Hardens The Only Way To Form It Is By Grinding Filing Or Drilling. You Can Also Sand It And Such But It Is Too Hard To Scrape. It Must Be Well Mixed By Pressing Into A Wad And Folding Over And Over Dozens Of Times. Epoxy That Is Not Well Mixed Is Useless. I Recently Used It To Tighten A Wobbly Kitchen Faucet Handle By Pressing A Bit Of It Into The Socket Of The Handle To Build Up The Sides Of The Socket And Then Pressing It Onto The Valve Spindle(making Sure It Doesn't Adhere To The Spindle Since I Want To Be Able To Remove The Handle). It Hardens In Over Five Minutes But For High Pressure Applications(like The Faucet) Let It Harden For At Least An Hour. Full Hardness Is Reached Is Several Hours. This Product May Not Be The Best Choice For Thin Film Surface Adhesion Like Gluing A Kick-stand Onto A Bicycle. For That Purpose Glues Based On The Crazy-glue Formula Are Best Such As Gorilla Glue(which Is A Thickened Version Of Crazy-glue) And Such Work Should Be Clamped Overnight. If You Are Using This For Adhesion Make Sure The Surfaces Are Clean And If Possible Sanded. Also Be Sure To Apply The Putty As Quickly As Possible Since As It Sets It Becomes Less Sticky Very Quickly."

PrimeSource/ 3Gs TW16312I ReBar Tie Wire

Secures Rebar To Rod Chairs Rebar Chairs And Other Intersecting Pieces Of Rebar. General Construction Use. Black. 16 Gauge. 3. 5 Lb.

PrimeSource/ 3Gs TW16312I ReBar Tie Wire

PrimeSource-3Gs-TW16312I-ReBar-Wire

J-B Weld 8276 KwikWeld Quick Setting Steel Reinforced Epoxy - 2 oz

J-b Weld Kwikweld Quick Setting Steel Reinforced Epoxyj-b Kwikweld Is A Fast Setting Version Of The Original J-b Weld Two-part Epoxy Cold Weld System That Provides Strong Lasting Repairs To Metal And Multiple Other Surface Types. After Mixing It Forms A Permanent Bond And Can Be Shaped Tapped Filed Sanded And Drilled After Curing. J-b Kwikweld Has A 1:1 Mixing Ratio Sets In 6 Minutes And Is Fully Cured In 4-6 Hours. J-b Kwikweld Cures To A Dark Grey Color Is Rated At A Tensile Strength Of 2424 Psi And Will Withstand Temperatures Up To 300 Degrees F. Great For:household Repairsautomotiveplumbingmarinecrafts And Moreuse On:automotivebrickconcretefiberglassmetaland Moreinstructions1. Prepare: Clean Surface Area Of Dirt Grease Oil Paint Or Loose Debris. For Best Results Use A Detergent Or Degreaser To First Clean The Surface Then Roughen Surface With File Or Coarse Sandpaper To Provide The Best Repair. 2. Mix: Squeeze Equal Parts From Each Tube Onto A Disposable Surface And Mix Thoroughly. 3. Apply: Apply With Appropriate Tool In An Even Coat Weld Bead Or Extruded Shape As Needed. 4. Dry: Sets In 6 Minutes. Cures 4 Hours. If Temperature Is Below 40 Degrees F Then Set Time Is Longer. J-b Weld Is Proudly Made In The Usa

J-B Weld 8276 KwikWeld Quick Setting Steel Reinforced Epoxy - 2 oz

J-B-Weld-8276-KwikWeld-Reinforced

J-B WELD 8276 KWIKWELD QUICK SETTING STEEL REINFORCED EPOXY - 2 OZ Advantage
Brand :    j-b weld
Color :    White
Size :    2 oz
Weight :    0.5 pounds
Model :    8276
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (Automotive Parts And Accessories) reviews for J-B Weld 8276 KwikWeld Quick Setting Steel Reinforced Epoxy - 2 oz available as-of ( Oct 2019 )
Fast setting version of The Original J-B Weld two-part epoxy cold weld systemWill withstand temperatures of up to 300 degrees FahrenheitGreat for household repairs, automotive applications, crafts and moreOnce cured it forms a permanent bond and can be shaped, tapped, filed, sanded and drilledRated at a tensile strength of 2424 PSISets in 6 minutes and cures dark grey in 4-6 hours

J-B Weld 8237 PlasticWeld Plastic Repair Epoxy Putty - 2 oz

J-b Weld Plasticweld Epoxy Puttyplasticweld Is A Hand-mixable Fast-setting Epoxy Putty That Forms A Durable Bond To Most Major Plastic Types. After Mixing It Forms A Polymer Compound That Can Be Molded Or Used To Build Up And Repair Just About Anything Made From Plastic. When Cured It Can Be Sawed Drilled Carved Sanded And Painted. Plasticweld Has A 20-25 Minute Work Life; Functional Cure Occurs In 2-3 Hours. Plasticweld Cures To An Off-white Color Is Rated At A Tensile Strength Of 350 Psi. Does Not Adhere To Polyethylene Polypropylene Or Some Other Plastics. Test For Adhesion First. Use On:automotiveceramicfiberglassplastic/composite/pvcand Moreinstructions1. Cut:remove Required Amount Of Putty. 2. Mix: Thoroughly Knead Putty With Fingers To A Uniform Color. 3. Apply: Press Putty Firmly To The Surface To Be Repaired. J-b Weld Is Proudly Made In The Usa

J-B Weld 8237 PlasticWeld Plastic Repair Epoxy Putty - 2 oz

J-B-Weld-8237-PlasticWeld-Plastic

J-B-WELD-8237-PLASTICWELD-PLASTIC-REPAIR-EPOXY-PUTTY---2-OZ-(J-B-WELD)

Image of J-b-weld-8237-plasticweld-plastic-repair-epoxy-putty---2-oz-(j-b-weld)
J-b-weld-8237-plasticweld-plastic-repair-epoxy-putty---2-oz-(j-b-weld)"J-b Weld 8237 Plasticweld Plastic Repair Epoxy Putty - 2 Oz Auto Accessory 8237
  • Reviews: PlasticWeld is a hand-mixable, fast-setting epoxy putty that forms a durable bond to most major plastic types
  • Reviews: J-B Weld Kwikplastic Epoxy Putty, 2 Oz
  • Reviews: This is manufactured in United States
j-b weld 8237 plasticweld plastic repair epoxy putty - 2 oz: j b weld auto accessory j-b weld plasticweld epoxy putty. . plasticweld is a hand-mixable "
J-B WELD 8237 PLASTICWELD PLASTIC REPAIR EPOXY PUTTY - 2 OZ Highlight
Brand :    j-b weld
Color :    Off White
Size :    2 oz
Weight :    0.15 pounds
Model :    8237
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (j-b weld) reviews for J-B Weld 8237 PlasticWeld Plastic Repair Epoxy Putty - 2 oz available as-of ( Oct 2019 )
PlasticWeld is a hand-mixable, fast-setting epoxy putty that forms a durable bond to most major plastic typesThis is manufactured in United StatesRepair and rebuild any rigid and semi-flexible plastic including ABS, PVC and CPVCBonds instantlySuperior strengthJ-B Weld Kwikplastic Epoxy Putty, 2 Oz

J-B Weld 8217 AutoWeld Gas Tank Repair - 1 oz.

J-b Weld Autoweld Epoxy Puttyautoweld Is A Hand-mixable Steel-reinforced Non-rusting Epoxy Putty That Quickly Repairs Or Rebuilds Anything Made Of Metal. After Mixing It Forms An Industrial-strength Polymer Compound That Can Be Molded Into Shapes Or Used To Build Up Patch And Repair Steel Components. Autoweld Sets In 5 Minutes And After 60 Minutes Can Be Drilled Tapped Machined Ground Filed And Painted. Autoweld Cures To A Dark Grey Color Is Rated At A Tensile Strength Of 900 Psi And Will Withstand Temperatures Up To 300 Degrees F. Use On:automotivefiberglassmetaland Moreinstructions1. Cut:remove Required Amount Of Putty. 2. Mix: Thoroughly Knead Putty With Fingers To A Uniform Color. 3. Apply: Press Putty Firmly To The Surface To Be Repaired. J-b Weld Is Proudly Made In The Usa

J-B Weld 8217 AutoWeld Gas Tank Repair - 1 oz.

J-B-Weld-8217-AutoWeld-Repair

J-B WELD 8217 AUTOWELD GAS TANK REPAIR - 1 OZ. Featured
Brand :    j-b weld
Size :    1 Ounce
Weight :    0.13 pounds
Model :    8217
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (j-b weld) reviews for J-B Weld 8217 AutoWeld Gas Tank Repair - 1 oz. available as-of ( Oct 2019 )
Hand kneadable, steel reinforced stick epoxy that bonds instantlyGreat for gas tank, water tank, and radiator repairsSets in 5 minutes, cures in 1 hourMade in the USAWill cure on wet and dry surfaces, including gasoline

Permatex 84209 PermaPoxy 4 Minute Multi-Metal Epoxy, Two 1 oz. Tubes

Permatex Permapoxy 4 Minute Multi-metal Epoxy Is A Versatile Easy-to-use Multi-metal Two-part Epoxy Adhesive And Filler System That Eliminates The Need For Welding Or Brazing. Sets In Four Minutes With No Clamping Needed And Has A Dark Grey Appearance. Fills Gaps And Will Not Shrink. When Cured Can Be Drilled Sanded Threaded Or Filed. Resistant To Water And Solvents With A Permanent Strength Up To 4500 Psi. Temperature Range Of -60 Degrees Fahrenheit To 300 Degrees Fahrenheit. Permatex Offers Convenient Solutions For A Wide Range Of Bonding Applications. Available In Many Packaging Configurations Permatex Epoxies Are Versatile And Easy-to-use. From General-purpose To Material-specific Permatex Offers A Formulation That Will Work For You.

Permatex 84209 PermaPoxy 4 Minute Multi-Metal Epoxy, Two 1 oz. Tubes

Permatex-84209-PermaPoxy-Minute-Multi-Metal

PERMATEX 84209 PERMAPOXY 4 MINUTE MULTI-METAL EPOXY, TWO 1 OZ. TUBES Review
Brand :    permatex
Size :    Two 1 Ounce Tubes
Model :    84209
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (permatex) reviews for Permatex 84209 PermaPoxy 4 Minute Multi-Metal Epoxy, Two 1 oz. Tubes available as-of ( Oct 2019 )
Resistant to water and solvents, with a permanent strength up to 4500 PSISuggested Applications: Ideal for complex, multi-piece assemblies. Bonds rigid materials including aluminum, brass, chrome, copper, iron, stainless steel, steel. Use to seal welded seams, fills metal cracks, mount metal componentsTwo-part adhesive and filler system that eliminates the need for welding or brazingSets in four minutes with no clamping neededVersatile, easy-to-use, multi-metal epoxy adhesive

J-B Weld 8281 Professional Size Steel Reinforced Epoxy Twin Pack - 10 oz

J-b Weld Original Cold-weld Formula Steel Reinforced Epoxyj-b Weld Is The Original Cold Weld Two-part Epoxy System That Provides Strong Lasting Repairs To Metal And Multiple Surfaces. Mixed At A Ratio Of 1:1 It Forms A Permanent Bond And Can Be Shaped Tapped Filed Sanded And Drilled After Curing. At Room Temperature J-b Weld Sets In 4-6 Hours To A Dark Grey Color. A Full Cure Is Reached In 15-24 Hours. J-b Weld Has A Tensile Strength Of 3960 Psi And Sets To A Hard Bond Overnight. It Can Withstand Temperatures Up To 550f When Fully Cured. Use On:automotivebrickconcreteepoxy And Adhesivesfiberglassmetaland Moreinstructions1. Prepare: Clean Surface Area Of Dirt Grease Oil Paint Or Loose Debris. For Best Results Use A Detergent Or Degreaser To First Clean The Surface Then Roughen Surface With File Or Coarse Sandpaper To Provide The Best Repair. 2. Mix: Squeeze Equal Parts From Each Tube Onto A Disposable Surface And Mix Thoroughly. 3. Apply: Apply With Appropriate Tool In An Even Coat Weld Bead Or Extruded Shape As Needed. 4. Dry: Sets In 4-6 Hours. Cures In 15-24 Hours. Allow 4-6 Hours Before Handling And 15 Hours (minimum) Before Putting Object Back In Use. J-b Weld Is Proudly Made In The Usa

J-B Weld 8281 Professional Size Steel Reinforced Epoxy Twin Pack - 10 oz

J-B-Weld-8281-Professional-Reinforced

J-B-WELD-8281-PROFESSIONAL-SIZE-STEEL-REINFORCED-EPOXY-TWIN-PACK---10-OZ-(J-B-WELD)

Image of J-b-weld-8281-professional-size-steel-reinforced-epoxy-twin-pack---10-oz-(j-b-weld)
J-b-weld-8281-professional-size-steel-reinforced-epoxy-twin-pack---10-oz-(j-b-weld)"J-b Weld 8281 Professional Size Steel Reinforced Epoxy Twin Pack - 10 Oz Auto Accessory 8281
  • Listed: For strong permanent repairs on automotive, plumbing, marine, crafts and other projects
  • Listed: Stays pliable for 30 minutes after mixing, sets in 4-6 hours and cures fully in 15-24 hours
  • Listed: Can be formed, drilled, ground, tapped, machined, filled, sanded and painted
j-b weld 8281 professional size steel reinforced epoxy twin pack - 10 oz: j b weld auto accessory j-b weld original cold-weld formula steel reinforced "
J-B WELD 8281 PROFESSIONAL SIZE STEEL REINFORCED EPOXY TWIN PACK - 10 OZ Features
Brand :    j-b weld
Size :    10 oz, 2 Pack
Weight :    0.80 pounds
Model :    8281
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (j-b weld) reviews for J-B Weld 8281 Professional Size Steel Reinforced Epoxy Twin Pack - 10 oz available as-of ( Oct 2019 )
Can be formed, drilled, ground, tapped, machined, filled, sanded and paintedStrong and nontoxic after it has set and temperature resistant up to 550FStays pliable for 30 minutes after mixing, sets in 4-6 hours and cures fully in 15-24 hoursFor strong permanent repairs on automotive, plumbing, marine, crafts and other projectsTensile strength: 3960 PSI

J-B Weld 8265S Cold Weld Steel Reinforced Epoxy with Hardener, 2 oz

J-b Weld Original Cold-weld Formula Steel Reinforced Epoxyj-b Weld Is The Original Cold Weld Two-part Epoxy System That Provides Strong Lasting Repairs To Metal And Multiple Surfaces. Mixed At A Ratio Of 1:1 It Forms A Permanent Bond And Can Be Shaped Tapped Filed Sanded And Drilled After Curing. At Room Temperature J-b Weld Sets In 4-6 Hours To A Dark Grey Color. A Full Cure Is Reached In 15-24 Hours. J-b Weld Has A Tensile Strength Of 3960 Psi And Sets To A Hard Bond Overnight. It Can Withstand Temperatures Up To 550f When Fully Cured. Use On:automotivebrickconcreteepoxy And Adhesivesfiberglassmetaland Moreinstructions1. Prepare: Clean Surface Area Of Dirt Grease Oil Paint Or Loose Debris. For Best Results Use A Detergent Or Degreaser To First Clean The Surface Then Roughen Surface With File Or Coarse Sandpaper To Provide The Best Repair. 2. Mix: Squeeze Equal Parts From Each Tube Onto A Disposable Surface And Mix Thoroughly. 3. Apply: Apply With Appropriate Tool In An Even Coat Weld Bead Or Extruded Shape As Needed. 4. Dry: Sets In 4-6 Hours. Cures In 15-24 Hours. Allow 4-6 Hours Before Handling And 15 Hours (minimum) Before Putting Object Back In Use. J-b Weld Is Proudly Made In The Usa

J-B Weld 8265S Cold Weld Steel Reinforced Epoxy with Hardener, 2 oz

J-B-Weld-8265S-Reinforced-Hardener

Review from I. Florence, Languedoc-Roussillon Used This On Some Splitting Fabric On A Beach Chair That Could Not Be Resown. Expensive Chair So Tried This Jb On The Underside Of The Fabric. Works! Steel Reinforced Gives It Extra Toughness. Pleased As Punch. One Of The Tubes Had A Lot Of Air In It But Jb Customer Service Was Great And Mailed A Replacement Tube Plus A New Twin Pak. Love The Product Love The Company! You Will Too.

J-b Weld 8265s Cold Weld Steel Reinforced Epoxy Hardener, 2 Oz (J B Weld) Review

Review from X. Alberta, Brandenburg 
J-b Weld Is My Go To Glue For Repairs In Everything But Wood. I Use Plain Old Wood Glue For That But Every Other Material (or If There Are Multiple Materials) I Use J-b Weld. I Like It For Plastic Or Metal Repairs On Things From Kitchen Items To Bathroom Items. This Stuff Just Holds. I Actually Have A Micro-plane That Has Held For 10 Years Since I Repaired It With J-b Weld. The Only Caveat Is That The Grey Color Is Visible And If You Don't Want That To Be Seen Then You Need To Carefully Design The Repair.
J-B-WELD-8265S-COLD-WELD-STEEL-REINFORCED-EPOXY-HARDENER,-2-OZ-(J-B-WELD)
Image of J-b-weld-8265s-cold-weld-steel-reinforced-epoxy-hardener,-2-oz-(j-b-weld)"As Others Have Stated This Is Go To Product To Attach Any Broken Parts. My Wife Broke Side View Mirror On Her Car And The Cheapest Replacement Mirror I Could Find Was $350. So Before Shelling Out The Big Bucks I Decided To Take $5 Gamble As Many Have Said This Does Not Work As Well On Plastic. Before Putting On The Adhesive I Sanded And Roughed Up The Two Adjoining Pieces And Cleaned The Area With Acetone (nail Polish Remover). After Making Sure The Area Is Completely Dry I Mixed Two Parts For About Three Minutes But Used Little More Of Hardener. After Applying The Weld I Let The Part Cure For 24 Hours And The Piece Have Held For Three Weeks So Far. This $5 Order Saved Me A Small Fortune In Getting A Replacement Part For The Car."

Works Exactly As Described. I Use It On My Composite Hockey Sticks When They Start To Break Down. Love My Easton Curves But Damnit They Have Brittle Toes And And Heals. This Gives The Stick New Life. I'm All Washed Up Now Playing Beer League But I Have Used This Stuff Even Back In The College Days.

U. Wayt, Connecticut

It Works Well! I Repaired A Microwave Oven's Door Handle That Broke Off. I Looked First For Replacing The Handle But It Is Already Discontinued So I Turned To This Epoxy. It Worked So Well That The Door Handle Is Now A Lot Stronger Than When It Was Brand New! It Cures Overnight To A Very Strong Bond. I Like That!

D. Melissa, Bourgogne

J-B WELD 8265S COLD WELD STEEL REINFORCED EPOXY WITH HARDENER, 2 OZ Benefit
Brand :    j-b weld
Size :    2 oz
Weight :    0.17 pounds
Model :    8265S
Quantity :    1
Order click here :    normally ships in 24 hours
Home Improvement :    Best Auto Accessory (Home Improvement) reviews for J-B Weld 8265S Cold Weld Steel Reinforced Epoxy with Hardener, 2 oz available as-of ( Oct 2019 )
Waterproof, petroleum, chemical, and acid resistant when fully curedIncludes 1 fl. oz. of steel-reinforced epoxy and 1 fl. oz. of hardenerStong and nontoxic after it has set and temperature resistant up to 500F, Tensile strength is 3,960 PSIEasy to use, cures to dark gray, Use on automotive, brick, concrete, metal, Will set in 4-6 hours, and cure in 16-24 hoursCan be drilled, tapped, machined, filed, sanded and painted

Permatex 25909 Liquid Metal Filler, 3. 5 oz.

Permatex Liquid Metal Filler Is A Specialty Adhesive Which Offers Ideal Solutions For Many Automotive Bonding Jobs. This Easy-to-use Filler Can Be Drilled Filed Sanded And Painted And Forms A Long-lasting Metal-tough Bond. Works On Metal Wood And Concrete And Is An Excellent Adhesion To Galvanized Metal. This Filler Also Repairs Cracks Or Porosity Leaks In Cast Metal Parts And Fills Small Holes Cracks And Perforations. As Complements To A Full Line Of Super Glues These Products Make A More Complete Adhesive Set While The Tried And True Formulas Guarantee Consumer Satisfaction.

Permatex 25909 Liquid Metal Filler, 3. 5 oz.

Permatex-25909-Liquid-Metal-Filler

PERMATEX 25909 LIQUID METAL FILLER, 3. 5 OZ. Spotlight
Brand :    permatex
Size :    3.5 Ounce
Weight :    0.25 pounds
Model :    25909
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (permatex) reviews for Permatex 25909 Liquid Metal Filler, 3. 5 oz. available as-of ( Oct 2019 )
Suggested Applications: Oil pans, stake bed holes, door panels, cast metal partsResists water, oil and gasolineExcellent adhesion to galvanized metalRepairs cracks or porosity leaks in cast metal parts and fills small holes, cracks, and perforationsWorks on metal, wood and concrete

J-B Weld 8277 WaterWeld Underwater Epoxy Putty - 2 oz

J-b Weld Waterweld Epoxy Puttywaterweld Will Plug Or Seal Leaks And Patch Holes And Cracks In Almost Anything. Ideal For Repairing Plumbing Fuel Tanks Tub And Shower Drains Pool And Spa Boats And Potable Water Tanks; Setup Occurs Even Under Water. After Curing It Can Be Drilled Tapped Filed Sanded And Painted. Waterweld Has A Set Time Of 15-25 Minutes And Sets Hard In One Hour. Waterweld Cures To An Off-white Color Is Rated At A Tensile Strength Of 900 Psi And Will Withstand Temperatures Up To 300 Degrees F. Use On:automotiveceramicfiberglassmetalplastic/composite/pvcunder Water/wetand Moreinstructions1. Cut:remove Required Amount Of Putty. 2. Mix: Thoroughly Knead Putty With Fingers To A Uniform Color. 3. Apply: Press Putty Firmly To The Surface To Be Repaired. J-b Weld Is Proudly Made In The Usa

J-B Weld 8277 WaterWeld Underwater Epoxy Putty - 2 oz

J-B-Weld-8277-WaterWeld-Underwater

Review from H. Cathy, Pays de la Loire First Confession I'm Not An Engineer. Nor Do I Have A Graduate Degree In Epoxies. But My Favorite Coffee Mug Had A Broken Handle And The Mug Was Irreplaceable. Did A Little Research Grew A Pair And Purchased The Product. So Easyto Use I Tthought I Was In Grade School Art Class. Excellent Result! A Perfectionist Might Whine The Epoxy Turns A Pale Pink Color In The Dishwasher But I've Got My Mug Back! Couldn't Be Happier!

J-b Weld 8277 Waterweld Underwater Epoxy Putty - 2 Oz (J B Weld) Review

Review from M. Sheila, Oklahoma 
J-b Weld Has Done It Again! I Have Used This Product On Gas Tanks Water Tanks And Even My Leaky Kitchen Faucet. Whether You Do Or Don't Follow The Directions To The Letter This Stuff Works. The Gas Tank I Used It On Was Dripping Gas Down My Arm When I Applied The Repair. Two Years Later And The Leak Is Still Sealed.
J-B-WELD-8277-WATERWELD-UNDERWATER-EPOXY-PUTTY---2-OZ-(J-B-WELD)
Image of J-b-weld-8277-waterweld-underwater-epoxy-putty---2-oz-(j-b-weld)"Excellent Product I Had A Leak In My Car And Tried To Get It Fixed At An Auto Repair Facility. The Asking Price For The Leak Was Around $600 Bucks And That Was For Diagnostics And Repair. I Located The Leak Purchased This Item And Fixed It Myself. A $600 Job Fixed With An Item That Costs Less Than $10. Talk About Highway Robbery When It Comes To Getting Your Car Repaired In A Shop!"

This Stuff Is Great. I Have A Fiberglas/acrylic Shower Enclosure That Had A A Couple Of Holes Starting To Show Because Of The Kids Dropping Things And Age Etc. I Used This Stuff And Let It Harden And It Does The Job Wonderfully Thanks

G. Gladys, Hammersmith and Fulham

I Purchased This Item To Repair A Stand Up Shower Railing. The Bolts Had Rusted And Through Wear Had Made A Hole In The Plastic Surround. I Covered Both The Nuts And Bolts With The Putty And Filled The Gap Gently Spreading The Putty. I Let It Set Overnight And It Fixed My Issue.

T. Peggy, Rutland

J-B WELD 8277 WATERWELD UNDERWATER EPOXY PUTTY - 2 OZ Reviews
Brand :    j-b weld
Color :    Off White
Size :    2 oz
Weight :    0.5 pounds
Model :    8277
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Home (Automotive Parts And Accessories) reviews for J-B Weld 8277 WaterWeld Underwater Epoxy Putty - 2 oz available as-of ( Oct 2019 )
Great for plumbing, tub, shower and drainsWorks on moist surfaces and under waterUse on automotive, ceramic, fiberglass, metalPlugs holes and makes permanent repairsSets in 30 minutes and paintable in 1 hourFully cures in 20-30 minutes

Blue Magic 16002TRI QuikSteel Steel Reinforced Epoxy Putty Repair, Blister Pack - 2 oz.

Cargo Quiksteel Epoxy Putty With Stands Up To 500 Degrees Fahrenheit Temperatures Sets In 5 Minutes Is Steel Hard In 15 Minutes And Cures In One Hour. Cures Under Water And Can Be Drilled Tapped Filed Sanded And Painted. Bonds To All Metals Fiberglass Plastics Glass Wood And Ceramics.

Blue Magic 16002TRI QuikSteel Steel Reinforced Epoxy Putty Repair, Blister Pack - 2 oz.

Blue-Magic-16002TRI-QuikSteel-Reinforced

BLUE MAGIC 16002TRI QUIKSTEEL STEEL REINFORCED EPOXY PUTTY REPAIR, BLISTER PACK - 2 OZ. Reviews
Brand :    blue magic
Size :    2 Ounce
Weight :    0.15 pounds
Model :    16002
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (blue magic) reviews for Blue Magic 16002TRI QuikSteel Steel Reinforced Epoxy Putty Repair, Blister Pack - 2 oz. available as-of ( Oct 2019 )
Drinking water safe, NSF-61Withstands up to 500 degree Fahrenheit temperaturesSets in 5 minutes, cures in 1 hourQuikSteel reinforced epoxy putty, 2 ounceHardens like steel, can be drilled, tapped, filed, sanded and painted
J-b Weld 8267-s Steelstik Steel Reinforced Epoxy Putty Stick - 2 Oz (J B Weld) Price : 3.97, was : 6.99 as 2017-01-18
USUKDEFRESITJPCNCAGlobal
United States
Great Britain
German
France
Spain
Italy
Japan
China
Canada
World Wide
J-b Weld 8267-s Steelstik Steel Reinforced Epoxy Putty Stick - 2 Oz (J B Weld) Reviewed by on jerdus.com

Top j-b weld 8267-s steelstik steel reinforced epoxy putty stick - 2 oz (j b weld) Content

The F.A.Q. for J-b Weld 8267-s Steelstik Steel Reinforced Epoxy Putty Stick - 2 Oz (J B Weld)

Outstanding ! Easy To Use. Not Only Bonds Well But Fast. But Not Too Fast. You Just Slice Off An Amount You Need Of The Two Part Putty. One Grey Part Putty On The Outside (hardener I Think) With Another Black Part Putty (epoxy) On The Inside. Or Maybe It's The Other Way Around. When You Are Ready You Begin Kneading The Two Parts Together Until They Are One Color. At This Point You Have 3 Minutes To Finish Working With The Epoxy Until It's Too Hard At According To The Instructions. I Had Maybe Double That Time In Actuality But Don't Count On That. I Used This To Actually Mold A Replacement Part Of Sorts. Part Of A Plastic Handle On A Folding Knife Had Broken Right Where The Blade Hinges And Folds Out. The Instructions Say That The Epoxy Will Set In About 3 Minutes But I Had Somewhat More Time Even After. I Had Enough Time To Apply The Epoxy Putty And Work It Into A Very Close Approximation Of The Original Part That Had Broken Off The Plastic Handle. I Did Have A Mirror Image To Go By From The Unbroken Other Half Of The Handle. Later After Letting Is Fully Set Some Grinding With A Dremel Tool Was All That Was Needed To Get The Epoxy To Look Rather Close To The Original Parts Shape. It Set Quit Hard But I Was Still Able To Grind It To Shape Without Too Much Trouble But It Was Far Harder Than The Original Plastic Handle. A Little Paint And You Now Have To Look Close To See The Repair. It's Mostly Noticeable From The Difference In Surface Texture With Is More Ceramic Like. Great Stuff.

A number of questions have been asked here.

Q&A

(0) Question: how difficult would this be to use in the threaded hole (threads stripped) of an exercise bike pedal crank arm?


(1) Question: can this product be used to fill in the hollow back of a ring that you wear on your finger?


(2) Question: will this hold up to water pressure, because i wiped out the internal threading of the drain plug to my water heater and i need to stop it leaking?! help!! plug is metal.


(3) Question: i have screw holes in a stainless steel range hood that i want to patch. after holes are filled, will it blend to look finished, or will patch show?


(4) Question: will this patch a pinhole in a ladle and is it nontoxic? it will be exposed to boiling liquid. thanks.


(5) Question: will this steel stick withstand the heat from a catylitc converter


(6) Question: would this product stick two small metal sheets together?


(7) Question: would this be able to patch a tailpipe?



(note) Question: where/how to get J B Weld (manufacturer's brand) accessories & similiar J B Weld's products

Answer:

Click the marked text to copy link to Clipboard

This was perfect to stop a natural gas line leak. While installing a water heater in an awkward space, a flare fitting connection for the gas line would not seal properly. Even when trying to get it to seal with yellow teflon tape, and then with pipe dope, a small amount of gas was still escaping. Even when using more torque, it would not seal. The problem was solved when i shut off the gas so there would be no pressure and then encircled the fitting with the steelstik. I'll never get a job as a plumber, but it worked. Perfectly. No more gas leak.


Automotive 18148651, Oils & Fluids 19781751, Pipe 19591751, Sealers 17591751Top J-b Weld 8267-s Steelstik Steel Reinforced Epoxy Putty Stick - 2 Oz (J B Weld) FAQ Content

Best j-b weld 8267-s steelstik steel reinforced epoxy putty stick - 2 oz (j b weld) in review

I've Depended On Epoxy Putty For Decades. Both The Yellow And Blue Ribbon I Kept In My Cars And Boat Lasted For Years In A Wide Range Of Temps And My Most Recent Two Part Marine Epoxy Lasted For Years In The Fridge. Neither Went Bad I Just Used Them Up. The Jp Weld Has To Be Used Fairly Quickly After Purchase. I Bought Two Sticks. The First I Used Most Of Almost Immediately And It Worked Fine. When I Tried To Use The Second Over A Year Later It Was A Disaster. It Had Been Stored In An Air Conditioned Room But Not The Fridge. The Outer Shell Was Hard It Was Oozing Liquid And I Ended Up With More Of It Sticking To My Hands Than Useable Putty When I Kneaded It. The Hard Shell Never Softened So The Putty Was Lumpy. There Are Better Choices If You Want To Keep Something Around For Emergencies. It Works Well If Used Up In A Few Months And The Price Is Right. I Have Found That Epoxy Putties Stick Better If You Heat Whatever You Stick It To. I Usually Use A Hair Dryer Rather Than My Heat Gun As I Am Less Likely To Screw Up With The Hair Dryer.

S. Kelly, Saarland

You might like to see J-b Weld 8265s Original Steel Reinforced Epoxy Twin Pack - 2 Oz (pack Of 2) Auto Accessory
  1. Products: Non Toxic formula
  2. Products: Use on automotive, brick, concrete, metal and more
  3. Products: Easy to use, cures to dark gray
J-b-weld-8265s-original-reinforced: J B Weld Auto Accessory J-b Weld Is The Original Cold Weld Two-part Epoxy System That Provides Strong Lasting Repairs J-b Weld 8265s Original Steel Reinforced Epoxy Twin Pack - 2 Oz (pack Of 2) (J B
Or you might like to consider J-b Weld 8267 Steelstik Reinforced Epoxy Putty Stick, 2 Oz Auto Accessory 8267
  • Additional: Hand-mixable, steel-reinforced, non-rusting epoxy putty that quickly repairs or rebuilds anything made of metal
  • Additional: Great for patching and repairing automotive and machine parts, plumbing, stripped threads and household repairs
  • Additional: Sets in 3-5 minutes and cures to a dark grey color in 1 hour
j-b weld 8267 steelstik reinforced epoxy putty stick, 2 oz: j b weld auto accessory j-b weld steelstik epoxy putty stick. . steelstik is a hand-mixable J-b Weld 8267 Steelstik Reinforced Epoxy Putty Stick, 2 Oz (J B

J. Sherry, Somerset says

Coming home one day, i ran over something in the road and it hit my gas tank putting a hole in it! not knowing what to do or not wanting to buy a new tank, i was told to try this stuff and after following the instructions a couple of applications, it worked super fantastic! it lasted for about 2 years i would say and i needed to reapply it which wasn't really a big deal! we have used it for other things and it works as advertised each time. . Some have said they used it on their exhaust but don't expect to put this on your header or downpipe as it will not be able to withstand that much heat. It might work on further down the exhaust system though?

G. Carol, Victoria

Stuff works great, set quicker than expected. I've used a lot of different epoxy puttys in the past. Most advertise around a 5 minute set, but remain pliable/ workable for a little longer than that. Not this stuff. Sets up real quick, which is good unless you are using it for a hobby or sculpting type application. I was making fake welds on a particle streamer which was challenging. Ended up using this for something more like it's intended purpose and fixed the bathroom sink instead.

K. Cecilia, Camden says

I bought this to do some very intricate repairs on some rings that i own, and i couldn't be more tickled if i swallowed a pink feather duster! while it does harden very quickly-within five minutes-it gave me enough time to do the repairs with the putty still being malleable. It cures withing one hour, so my rings were ready to go fairly fast. The best part is that the color blends in perfectly with the color of the band, not that it can be seen, but it doesn't look like a patch job. I will purchase this again when needed and i do recommend it highly to anyone who needs to repair anything that is metal based. I am accustomed to working with all kinds of epoxy putties, so maybe this was easy for me to get the job done before the epoxy putty hardened, but i have to say it again; this stuff is incredible!

Z. Smith, Lewisham

This is not like welding but it does a good job. I used the epoxy to repair a beautifully designed but poorly constructed chandelier. I suffered through a few unsuccessful attempts with the epoxy where the weight of the "stem" simply broke through the "weld. " i managed to relieve the weight of the stem by tying it to a support and thus alleviated any pressure from the newly epoxied joint. I let it cure for a couple days and it made a nice strong bond. I did use quite a bit of this stuff to build up a good base. Ok, maybe it's not too pretty but with a little metal paint it works and best of all i did it for the cost of the epoxy.

B. Valencia, California says

Excellent Product I Had A Leak In My Car And Tried To Get It Fixed At An Auto Repair Facility. The Asking Price For The Leak Was Around $600 Bucks And That Was For Diagnostics And Repair. I Located The Leak Purchased This Item And Fixed It Myself. A $600 Job Fixed With An Item That Costs Less Than $10. Talk About Highway Robbery When It Comes To Getting Your Car Repaired In A Shop!

N. Ross, Maine

Great product for multiple repairs. It's easy to mix the exact amount needed and form the material as required. In an hour you have a durable material you can drill or tap if needed. It even attracts magnets if that is beneficial.

M. Nellie, Provence-Alpes-Cote dAzur says

This is for the repairs around the house that transcend just gluing two surfaces together. This is for those kinds of situations in which there is "loss of tissue" for plastics, metals and other materials that are under the pressure of weight. For example, this putty recently allowed me to remount a wheel that supported a cart that was some 30 or 40 pounds. There were really no surfaces for glue to hold together. Rather this putty had to molded in order to replace a plastic housing that had disintegrated. Needless to say, i like having this on hand to fix things that i'd otherwise have to throw away. . It's easy to use, hardens face, and inexpensive. Get it.

I. Sandra, Alsace

Not Sure Why All The Negative Reviews It Worked Fine For Me. Mixed It Up Well Like The Instructions Said (i Used Rubber Gloves Though Wouldn't Want It On My Hands). I Plugged Up A Small Rusty Dent On My Porcelain Tub With It. So Far No Problems And No More Rust. I Sanded The Rusted Areas First With 400 And 800 Grit Sand Paper Then Cleaned Off The Surface Really Well And Applied The Putty. It Hardened Right Away. Now All It Needs Is A Little Sanding And Some Porcelain Touch Up And I Think It Will Look Like New Again. Very Happy With The Product. I Can See Lots Of Other Uses For It In The Future.

M. Jennifer, Bromley says

I Ordered This Formula For An Unusual Purpose. The Lever On My Recliner Had Stripped The Inside Plastic Socket Which Surrounded The Lever's Shaft Into The Mechanism. After Removing The Lever And Cleaning It Up I Sanded The Shaft To Bare Metal. It Also Had A Hollow Center. I Mixed Up About 1/2 Inch From The Bottle And Pressed It Into The Shaft's Hollow Center As Well As Filling Up The Socket Of The Lever Arm. I Then Pressed The Lever On The Shaft And Held It Firmly In Place For About 5 Minutes (while Watching Tv. ) Releasing My Pressure I Left The Assembly Sit For About 6 Hours. When I Went To Sit In The Recliner And Use The Lever It Worked Fine And Is Not Firmly In Place. Just What I Needed!

N. Anderson, North East Lincolnshire

It's Like Superglue And Ductape Had A Baby Which Was Raised By Playdough As A Single Parent. Very Easy To Apply And Use It Seems To Bond Well To Almost Any Surface Especially If It's Coarse Or Plastic. (rough Surfaces Up A Bit If You're In Doubt. Use High-grit Sand Paper And A Steel Brush Or File Or Something To Scratch It Thoroughly. ) I Had No Trouble Bonding/wrapping It Around (securely) In The Same Application: Aluminum Plastic Leather Cloth Nylon. It Stuck And Dried Perfectly To Each Surface And The Resulting Repair Is More Durable Than The Item Was Before It Was Broke. From My Meager Tests It's Very Strong. Well Worth The Price For What I've Already Repaired. ($350 Head Phones Weedeater Gas Tank Finicky Water Hose Sprayer. )

F. Carmen, Hertfordshire says

I use this stuff alot i have a small maintinance buisness and it helps fix all kinds of things when used within it's limits. Used about 5 packages today pretty much fixing a broken garage door with this, some angle iron and some machine screws. Have used it for other things, held my wife's car exhaust bracket up for a few years when it fell before we traded in the car where it should still be holding. Ui have even ued it in areas where i needed to retap mounts for screws when plastic/metal breaks, works fine and lasts decades, note it is not as strong as a real weld though, know the limits of any product i would not trust this for say holding together the fram for a vehicle or even an engine mount on something as small as a go cart, but as long as it isn't holding more than 100 or so and not being directly banged on. / torqued this is a great product

C. Carrie, Hawaii

Incredibly Strong Especially For A Quick-setting Putty. My Spouse Accidently Ripped The Driver's Side Mirror Off The Car With A Pole At A Prescription Pickup Window At The Pharmacy. I Used This Putty To Quickly Reattach The Three Broken Plastic Mounts. The Fact That This Stuff Is Truly A 5-minute Setup Epoxy Is Absolutely Amazing. It Setup Rock-hard In The 5-minutes (in The Warm Florida Sun) Just As The Directions Stated. It Molded Very Easily Conformed Perfectly And Adhered Very Well To All Plastic Surfaces. All Very Good Qualities I Needed To Perform A Quick Repair. The Mirror Is Still In Place After Several Months Bouncing Down Our Gravel Driveway And Many Door Slams Later. Note: The Tube I Used For The Repair Was Actually The Leftover Portion Of A Tube I Had Purchased/used At Least A Couple Years Prior And The Putty Sitting Up On My Shelf Still Worked Beautifully Even Then. Good Shelf Life!



Leave a Reply

You must be logged in to post a comment.


Top j b weld 8267 s steelstik reinforced Review Content

Related Products

Product Image Gallery

Top-j-b-weld-8267-s-steelstik-reinforced-417900786glm-Content