J-b Weld 8276 Kwikweld Quick Setting Steel Reinforced Epoxy – 2 Oz (J B Weld) 4182

Review for j b weld 8276 kwikweld reinforced

Price was $3.49 - $67.96. Fix a small leak worked out great

-A. Mahood

J-b Weld 8276 Kwikweld Quick Setting Steel Reinforced Epoxy – 2 Oz Auto Accessory 8276

  • Additional: Great for household repairs, automotive applications, crafts and more
  • Additional: Fast setting version of The Original J-B Weld two-part epoxy cold weld system
  • Additional: Sets in 6 minutes and cures dark grey in 4-6 hours

j-b weld 8276 kwikweld quick setting steel reinforced epoxy – 2 oz: j b weld auto accessory j-b weld kwikweld quick setting steel reinforced epoxy. .

Buy Now

Content

Fast Setting Version Of The Original J-B Weld Two-part Epoxy Cold Weld System, Great For Household Repairs, Automotive Applications, Crafts And More, Sets In 6 Minutes And Cures Dark Grey In 4-6 Hours, Once Cured It Forms A Permanent Bond And Can Be Shaped, Tapped, Filed, Sanded And Drilled, Rated At A Tensile Strength Of 2424 PSI, Will Withstand Temperatures Of Up To 300 Degrees Fahrenheit, J-B Weld Is Proudly Made In The USA, Additional J-B Weld 8276 KwikWeld Quick Setting Steel Reinforced Epoxy - 2 oz.

Plus: J-b Weld 8276 Kwikweld Quick Setting Steel Reinforced Epoxy - 2 Oz

. J-b Weld 8276 Kwikweld Quick Setting Steel Reinforced Epoxy - 2 Oz 8276 Buy Automotive Parts And Accessories 088020712318 J B Weld, J-b Weld 8276 Kwikweld Quick Setting Steel Reinforced Epoxy - 2 Oz 0036577522348. j-b weld kwikweld quick setting steel reinforced epoxy. . j-b kwikweld is a fast setting version of the original j-b weld two-part epoxy cold weld system that provides strong lasting repairs to metal and multiple other surface types. after mixing it forms a permanent bond and can be shaped tapped filed sanded and drilled after curing. j-b kwikweld has a 1:1 mixing ratio sets in 6 minutes and is fully cured in 4-6 hours. j-b kwikweld cures to a dark grey color is rated at a tensile strength of 2424 psi and will withstand temperatures up to 300 degrees f. . . great for:household repairsautomotiveplumbingmarinecrafts and more. use on:automotivebrickconcretefiberglassmetaland more. instructions. . 1. prepare: clean surface area of dirt grease oil paint or loose debris. for best results use a detergent or degreaser to first clean the surface then roughen surface with file or coarse sandpaper to provide the best repair. . 2. mix: squeeze equal parts from each tube onto a disposable surface and mix thoroughly. . 3. apply: apply with appropriate tool in an even coat weld bead or extruded shape as needed. . 4. dry: sets in 6 minutes. cures 4 hours. if temperature is below 40 degrees f then set time is longer. . . j-b weld is proudly made in the usa J-b Weld 8276 Kwikweld Quick Setting Steel Reinforced Epoxy - 2 Oz Auto Accessory 8276.

J-B Weld 8276 KwikWeld Quick Setting Steel Reinforced Epoxy - 2 oz Review (8276)

J-b Weld 8276 Kwikweld Quick Setting Steel Reinforced Epoxy - 2 Oz

Rank
Misc.
Brand
J-B Weld
ClothingSize
1-Pack
Color
White
EAN
0036577522348
HazardousMaterialType
Unknown
Manufacturer
J-B Weld
Recommended Max-Age
1440
Suggested Min-Age
168
ManufacturerPartsWarrantyDescription
Parts
Model
8276
MPN
8276
Total Items
1
Quantity
1
Part Number
8276
Order
Automotive Parts And Accessories
Category
AUTO ACCESSORY
ReleaseDate
1992-12-04
Size
2 Oz
Title
J-B Weld 8276 KwikWeld Quick Setting Steel Reinforced Epoxy - 2 Oz
UPC
088020712318

Plus J-b-weld-8276-kwikweld-reinforced

J B Weld . 8276: J-B Weld 8276 KwikWeld Quick Setting Steel Reinforced Epoxy - 2 oz

  1. Great For Household Repairs, Automotive Applications, Crafts And More
  2. Fast Setting Version Of The Original J-B Weld Two-part Epoxy Cold Weld System
  3. J-B Weld 8265S Cold Weld Steel Reinforced Epoxy With Hardener, 2 Oz
  4. J-B Weld 8281 Professional Size Steel Reinforced Epoxy Twin Pack - 10 Oz
  5. J-B Weld 50101 MinuteWeld Instant-Setting Epoxy Syringe - Dries Clear - 25ml
  6. Blue Magic 16002TRI QuikSteel Steel Reinforced Epoxy Putty Repair, Blister Pack - 2 Oz.
  7. J-B Weld 8277 WaterWeld Underwater Epoxy Putty - 2 Oz
  8. Gorilla Epoxy, .85 Oz., Clear
  9. Rectorseal 97606 4-Ounce Ep-400 Epoxy Putty
  10. J-B Weld 8237 PlasticWeld Plastic Repair Epoxy Putty - 2 Oz
  11. J-B Weld 8267-S SteelStik Steel Reinforced Epoxy Putty Stick - 2 Oz
  12. J-B Weld 8267 SteelStik Reinforced Epoxy Putty Stick, 2 Oz
  13. Sets In 6 Minutes And Cures Dark Grey In 4-6 Hours
Buy

I can't remember why i got this but it's j-b weld and the stuff works!

j-b-weld-8276-kwikweld-reinforced
Click to see NoticeJ-b Weld 8276 Kwikweld Quick Setting Steel Reinforced Epoxy - 2 Oz (J B Weld)"Great epoxy. I used this to fix an antique 1/4 in iron frame that had snapped. I attached a photo, the break was right at where the leaf attaches. The compound dries a brown-black color, so it matches the patina perfectly. Seems to be holding everything together. Set quickly, was easy to apply."

J-B Weld 8276 KwikWeld Quick Setting Steel Reinforced Epoxy - 2 oz | MobileView

J-b-weld-8276-kwikweld-reinforced

J-B Weld 8276 KwikWeld Quick Setting Steel Reinforced Epoxy - 2 oz

Drain Cleaning Equipment » Faucet Parts » Garbage Disposals & Parts » Pipes, Pipe Fittings & Accessories » Toilet Parts » Valves » Water Heaters & Parts » Water Pumps, Parts & Accessories » Arc Welding Equipment » Cable » Clamps » Gas Welding Equipment » MIG Welding Equipment » Plasma Cutting Equipment » Spot Welding Equipment » TIG Welding Equipment » Tip Cleaners » Welding Wire »

Blue Magic 16002TRI QuikSteel Steel Reinforced Epoxy Putty Repair, Blister Pack - 2 oz.

Cargo Quiksteel Epoxy Putty With Stands Up To 500 Degrees Fahrenheit Temperatures Sets In 5 Minutes Is Steel Hard In 15 Minutes And Cures In One Hour. Cures Under Water And Can Be Drilled Tapped Filed Sanded And Painted. Bonds To All Metals Fiberglass Plastics Glass Wood And Ceramics.

Blue Magic 16002TRI QuikSteel Steel Reinforced Epoxy Putty Repair, Blister Pack - 2 oz.

Blue-Magic-16002TRI-QuikSteel-Reinforced

BLUE MAGIC 16002TRI QUIKSTEEL STEEL REINFORCED EPOXY PUTTY REPAIR, BLISTER PACK - 2 OZ. Feature
Brand :    blue magic
Size :    2 Ounce
Weight :    0.15 pounds
Model :    16002
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (blue magic) reviews for Blue Magic 16002TRI QuikSteel Steel Reinforced Epoxy Putty Repair, Blister Pack - 2 oz. available as-of ( Oct 2019 )
Withstands up to 500 degree Fahrenheit temperaturesHardens like steel, can be drilled, tapped, filed, sanded and paintedDrinking water safe, NSF-61Sets in 5 minutes, cures in 1 hourQuikSteel reinforced epoxy putty, 2 ounce

J-B Weld 8237 PlasticWeld Plastic Repair Epoxy Putty - 2 oz

J-b Weld Plasticweld Epoxy Puttyplasticweld Is A Hand-mixable Fast-setting Epoxy Putty That Forms A Durable Bond To Most Major Plastic Types. After Mixing It Forms A Polymer Compound That Can Be Molded Or Used To Build Up And Repair Just About Anything Made From Plastic. When Cured It Can Be Sawed Drilled Carved Sanded And Painted. Plasticweld Has A 20-25 Minute Work Life; Functional Cure Occurs In 2-3 Hours. Plasticweld Cures To An Off-white Color Is Rated At A Tensile Strength Of 350 Psi. Does Not Adhere To Polyethylene Polypropylene Or Some Other Plastics. Test For Adhesion First. Use On:automotiveceramicfiberglassplastic/composite/pvcand Moreinstructions1. Cut:remove Required Amount Of Putty. 2. Mix: Thoroughly Knead Putty With Fingers To A Uniform Color. 3. Apply: Press Putty Firmly To The Surface To Be Repaired. J-b Weld Is Proudly Made In The Usa

J-B Weld 8237 PlasticWeld Plastic Repair Epoxy Putty - 2 oz

J-B-Weld-8237-PlasticWeld-Plastic

J-B-WELD-8237-PLASTICWELD-PLASTIC-REPAIR-EPOXY-PUTTY---2-OZ-(J-B-WELD)

Image of J-b-weld-8237-plasticweld-plastic-repair-epoxy-putty---2-oz-(j-b-weld)
J-b-weld-8237-plasticweld-plastic-repair-epoxy-putty---2-oz-(j-b-weld)"J-b Weld 8237 Plasticweld Plastic Repair Epoxy Putty - 2 Oz Auto Accessory 8237
  • Reviews: PlasticWeld is a hand-mixable, fast-setting epoxy putty that forms a durable bond to most major plastic types
  • Reviews: J-B Weld Kwikplastic Epoxy Putty, 2 Oz
  • Reviews: This is manufactured in United States
j-b weld 8237 plasticweld plastic repair epoxy putty - 2 oz: j b weld auto accessory j-b weld plasticweld epoxy putty. . plasticweld is a hand-mixable "
J-B WELD 8237 PLASTICWELD PLASTIC REPAIR EPOXY PUTTY - 2 OZ Features
Brand :    j-b weld
Color :    Off White
Size :    2 oz
Weight :    0.15 pounds
Model :    8237
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (j-b weld) reviews for J-B Weld 8237 PlasticWeld Plastic Repair Epoxy Putty - 2 oz available as-of ( Oct 2019 )
Superior strengthJ-B Weld Kwikplastic Epoxy Putty, 2 OzRepair and rebuild any rigid and semi-flexible plastic including ABS, PVC and CPVCBonds instantlyPlasticWeld is a hand-mixable, fast-setting epoxy putty that forms a durable bond to most major plastic typesThis is manufactured in United States

J-B Weld 8267-S SteelStik Steel Reinforced Epoxy Putty Stick - 2 oz

J-b Weld Steelstik Epoxy Putty Sticksteelstik Is A Hand-mixable Steel-reinforced Non-rusting Epoxy Putty That Quickly Repairs Or Rebuilds Anything Made Of Metal. After Mixing It Forms An Industrial-strength Polymer Compound That Can Be Molded Into Shapes Or Used To Build Up Patch And Repair Steel Components. Steelstik Sets In 3-5 Minutes And After 60 Minutes Can Be Drilled Tapped Machined Ground Filed And Painted. Steelstik Cures To A Dark Grey Color Is Rated At A Tensile Strength Of 900 Psi And Will Withstand Temperatures Up To 300 Degrees F. Use On:automotivebrickceramicconcretemetalunder Water/wetand Moreinstructions1. Cut:remove Required Amount Of Putty. 2. Mix: Thoroughly Knead Putty With Fingers To A Uniform Color. 3. Apply: Press Putty Firmly To The Surface To Be Repaired. J-b Weld Is Proudly Made In The Usa

J-B Weld 8267-S SteelStik Steel Reinforced Epoxy Putty Stick - 2 oz

J-B-Weld-8267-S-SteelStik-Reinforced

J-B-WELD-8267-S-STEELSTIK-STEEL-REINFORCED-EPOXY-PUTTY-STICK---2-OZ-(J-B-WELD)

Image of J-b-weld-8267-s-steelstik-steel-reinforced-epoxy-putty-stick---2-oz-(j-b-weld)
J-b-weld-8267-s-steelstik-steel-reinforced-epoxy-putty-stick---2-oz-(j-b-weld)"J-b Weld 8267-s Steelstik Steel Reinforced Epoxy Putty Stick - 2 Oz Auto Accessory 8267 S
  • Components: The product is steelstik epoxy stick
  • Components: Easy and simple use kit
  • Components: The product is manufactured in United states
j-b weld 8267-s steelstik steel reinforced epoxy putty stick - 2 oz: j b weld auto accessory j-b weld steelstik epoxy putty stick. . steelstik is a hand-mixable "
J-B WELD 8267-S STEELSTIK STEEL REINFORCED EPOXY PUTTY STICK - 2 OZ Pros
Brand :    j-b weld
Color :    Dark Gray
Size :    1-Pack
Weight :    0.11 pounds
Model :    8267-S
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (Automotive Parts And Accessories) reviews for J-B Weld 8267-S SteelStik Steel Reinforced Epoxy Putty Stick - 2 oz available as-of ( Oct 2019 )
Can be drilled, filed, tapped, machined and paintedSteel reinforced epoxy putty repairs anything made of metalWill cure on wet and dry surfaces, even completely submerged in gasoline or waterThe product is manufactured in United statesThe product is steelstik epoxy stickEasy and simple use kit

J-B Weld 8267 SteelStik Reinforced Epoxy Putty Stick, 2 oz

J-b Weld Steelstik Epoxy Putty Sticksteelstik Is A Hand-mixable Steel-reinforced Non-rusting Epoxy Putty That Quickly Repairs Or Rebuilds Anything Made Of Metal. After Mixing It Forms An Industrial-strength Polymer Compound That Can Be Molded Into Shapes Or Used To Build Up Patch And Repair Steel Components. Steelstik Sets In 3-5 Minutes And After 60 Minutes Can Be Drilled Tapped Machined Ground Filed And Painted. Steelstik Cures To A Dark Grey Color Is Rated At A Tensile Strength Of 900 Psi And Will Withstand Temperatures Up To 300 Degrees F. Use On:automotivebrickceramicconcretemetalunder Water/wetand Moreinstructions1. Cut:remove Required Amount Of Putty. 2. Mix: Thoroughly Knead Putty With Fingers To A Uniform Color. 3. Apply: Press Putty Firmly To The Surface To Be Repaired. J-b Weld Is Proudly Made In The Usa

J-B Weld 8267 SteelStik Reinforced Epoxy Putty Stick, 2 oz

J-B-Weld-8267-SteelStik-Reinforced

J-B-WELD-8267-STEELSTIK-REINFORCED-EPOXY-PUTTY-STICK,-2-OZ-(J-B-WELD)

Image of J-b-weld-8267-steelstik-reinforced-epoxy-putty-stick,-2-oz-(j-b-weld)
J-b-weld-8267-steelstik-reinforced-epoxy-putty-stick,-2-oz-(j-b-weld)"J-b Weld 8267 Steelstik Reinforced Epoxy Putty Stick, 2 Oz Auto Accessory 8267
  • Additional: Hand-mixable, steel-reinforced, non-rusting epoxy putty that quickly repairs or rebuilds anything made of metal
  • Additional: Great for patching and repairing automotive and machine parts, plumbing, stripped threads and household repairs
  • Additional: Sets in 3-5 minutes and cures to a dark grey color in 1 hour
j-b weld 8267 steelstik reinforced epoxy putty stick, 2 oz: j b weld auto accessory j-b weld steelstik epoxy putty stick. . steelstik is a hand-mixable "
J-B WELD 8267 STEELSTIK REINFORCED EPOXY PUTTY STICK, 2 OZ Benefits
Brand :    j-b weld
Model :    8267
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (j-b weld) reviews for J-B Weld 8267 SteelStik Reinforced Epoxy Putty Stick, 2 oz available as-of ( Oct 2019 )
Sets in 3-5 minutes and cures to a dark grey color in 1 hourJ-B Weld is proudly made in the USAWhen fully cured, SteelStik has a tensile strength of 900 psi and will withstand temperatures of up to 300 degrees FGreat for patching and repairing automotive and machine parts, plumbing, stripped threads and household repairsHand-mixable, steel-reinforced, non-rusting epoxy putty that quickly repairs or rebuilds anything made of metal

Rectorseal 97606 4-Ounce Ep-400 Epoxy Putty

Rectorseal Epoxy Puttyis A Pre-measured High Grade Epoxy And Hardener Formulated Together In One Stick Making It Easy To Break Off The Amount Needed For Each Repair. Rectorseal Epoxy Putty Bonds To Most Surfaces And Hardens In 15 To 20 Minutes. It Can Then Be Sanded Painted Drilled Taped And/or Machined.

Rectorseal 97606 4-Ounce Ep-400 Epoxy Putty

Rectorseal-97606-4-Ounce-Ep-400-Epoxy

RECTORSEAL 97606 4-OUNCE EP-400 EPOXY PUTTY Spotlight
Brand :    rectorseal
Model :    97601
Quantity :    1
Order click here :    normally ships in 24 hours
Home Improvement :    Best Plumbing Fixture (rectorseal) reviews for Rectorseal 97606 4-Ounce Ep-400 Epoxy Putty available as-of ( Oct 2019 )
Can even harden under waterCan withstand temperatures continuously up to 500-Degree FRECTORSEAL ep-200 epoxy putty, 2 ozRECTORSEAL epoxy putty is a Pre-Measured, high grade epoxy and hardener formulated together in one stick, making it easy to break off the amount needed for each repairPressure tested to 1300 psiThis is manufactured in United States

J-B Weld 8281 Professional Size Steel Reinforced Epoxy Twin Pack - 10 oz

J-b Weld Original Cold-weld Formula Steel Reinforced Epoxyj-b Weld Is The Original Cold Weld Two-part Epoxy System That Provides Strong Lasting Repairs To Metal And Multiple Surfaces. Mixed At A Ratio Of 1:1 It Forms A Permanent Bond And Can Be Shaped Tapped Filed Sanded And Drilled After Curing. At Room Temperature J-b Weld Sets In 4-6 Hours To A Dark Grey Color. A Full Cure Is Reached In 15-24 Hours. J-b Weld Has A Tensile Strength Of 3960 Psi And Sets To A Hard Bond Overnight. It Can Withstand Temperatures Up To 550f When Fully Cured. Use On:automotivebrickconcreteepoxy And Adhesivesfiberglassmetaland Moreinstructions1. Prepare: Clean Surface Area Of Dirt Grease Oil Paint Or Loose Debris. For Best Results Use A Detergent Or Degreaser To First Clean The Surface Then Roughen Surface With File Or Coarse Sandpaper To Provide The Best Repair. 2. Mix: Squeeze Equal Parts From Each Tube Onto A Disposable Surface And Mix Thoroughly. 3. Apply: Apply With Appropriate Tool In An Even Coat Weld Bead Or Extruded Shape As Needed. 4. Dry: Sets In 4-6 Hours. Cures In 15-24 Hours. Allow 4-6 Hours Before Handling And 15 Hours (minimum) Before Putting Object Back In Use. J-b Weld Is Proudly Made In The Usa

J-B Weld 8281 Professional Size Steel Reinforced Epoxy Twin Pack - 10 oz

J-B-Weld-8281-Professional-Reinforced

J-B-WELD-8281-PROFESSIONAL-SIZE-STEEL-REINFORCED-EPOXY-TWIN-PACK---10-OZ-(J-B-WELD)

Image of J-b-weld-8281-professional-size-steel-reinforced-epoxy-twin-pack---10-oz-(j-b-weld)
J-b-weld-8281-professional-size-steel-reinforced-epoxy-twin-pack---10-oz-(j-b-weld)"J-b Weld 8281 Professional Size Steel Reinforced Epoxy Twin Pack - 10 Oz Auto Accessory 8281
  • Listed: For strong permanent repairs on automotive, plumbing, marine, crafts and other projects
  • Listed: Stays pliable for 30 minutes after mixing, sets in 4-6 hours and cures fully in 15-24 hours
  • Listed: Can be formed, drilled, ground, tapped, machined, filled, sanded and painted
j-b weld 8281 professional size steel reinforced epoxy twin pack - 10 oz: j b weld auto accessory j-b weld original cold-weld formula steel reinforced "
J-B WELD 8281 PROFESSIONAL SIZE STEEL REINFORCED EPOXY TWIN PACK - 10 OZ Pros
Brand :    j-b weld
Size :    10 oz, 2 Pack
Weight :    0.80 pounds
Model :    8281
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (j-b weld) reviews for J-B Weld 8281 Professional Size Steel Reinforced Epoxy Twin Pack - 10 oz available as-of ( Oct 2019 )
Stays pliable for 30 minutes after mixing, sets in 4-6 hours and cures fully in 15-24 hoursCan be formed, drilled, ground, tapped, machined, filled, sanded and paintedFor strong permanent repairs on automotive, plumbing, marine, crafts and other projectsTensile strength: 3960 PSIStrong and nontoxic after it has set and temperature resistant up to 550F

Gorilla Epoxy, . 85 oz. , Clear

Gorilla Takes Epoxy To A New Levelthe Gorilla Tough Level. With Its Superior Solvent And Water Resistance Gorilla Epoxy Adhesive Is Incredibly Strong And Durable For Household And Automotive Repairs Alike. The Easy-to-use Syringe Keeps The Epoxy Resin And Hardener Separate So It Is Easy To Dispense And Wont Harden Over Time. The Two-part Gap-filling Formula Easily Bonds Steel Aluminum Glass Wood Ceramic Tile And Most Plastics. Plus It Dries In An Ideal Crystal-clear Finish That Makes Projects Look Spotless. Directions: 1. Prepare Your Work Area And The Surface: It Is Recommended To Use Gorilla Epoxy In A Well-ventilated Area. Prepare The Surface: To Improve Adhesion Roughen Smooth Surfaces Before Gluing. Then Clean And Dry All Surfaces To Be Bonded. 2. Mixing Gorilla Epoxy: Remove The Black Cap. With Tip Pointing Upward Cut Or Snap The End From Tip Of The Syringes. With The Tip Still Pointing Upward Eliminate Air And Ensure Even Dispensing By Slowly Pushing The Plunger Until Both The Resin And The Hardener Are At The Tip. Push The Plunger To Dispense Even Amounts Of Resin And Hardener Onto A Clean Disposable Contained Surface. Mix The Two Parts For About 20 Seconds Until The Mixture Is Uniform. 3. Application: After Mixing Is Complete Apply Gorilla Epoxy Within 5 Minutes. The Epoxy Mixture Will Continue To Thicken And The Bond Strength Will Decrease The Longer You Wait To Apply. 4. Clamping: To Reach Maximum Bond Strength Clamp Project Together And Leave Undisturbed. Important Cure Times: Set: 5 Minutes To Apply And Position Handling: Allow To Cure For 30 Minutes Undisturbed (no Weight Or Handling) Final Cure: Allow 24 Hours For Load-bearing Weight Storage: To Close Pull Plunger Slightly Back. Wipe Tip Clean With Dry Cloth And Align Notch On Tip And Cap. Close Tightly. Click On The Gorilla Link At The Top Of This Page To See More Fine Products From The Gorilla Glue Company.

Gorilla Epoxy, . 85 oz. , Clear

Gorilla-Epoxy-85-oz-Clear

GORILLA EPOXY, . 85 OZ. , CLEAR Spotlight
Brand :    gorilla
Color :    Light Brown
Size :    1 - Pack
Weight :    0.14 pounds
Model :    4200101
Quantity :    1
Order click here :    normally ships in 24 hours
Home Improvement :    Best Hardware (gorilla) reviews for Gorilla Epoxy, . 85 oz. , Clear available as-of ( Oct 2019 )
5 Minute Set; Plenty of repositioning time for the perfect fitBest for tough repairs requiring a durable bond, gap-filling and solvent resistanceDries Clear; Ideal for clean, easy finishingEasy-to-Use Syringe; Separate barrels of resin and hardener keep epoxy from hardening, plus syringe dispenses evenly and includes a cap for multiple usesStrong, permanent, fast and gap-filling; Great for multiple surface applications

J-B Weld 8277 WaterWeld Underwater Epoxy Putty - 2 oz

J-b Weld Waterweld Epoxy Puttywaterweld Will Plug Or Seal Leaks And Patch Holes And Cracks In Almost Anything. Ideal For Repairing Plumbing Fuel Tanks Tub And Shower Drains Pool And Spa Boats And Potable Water Tanks; Setup Occurs Even Under Water. After Curing It Can Be Drilled Tapped Filed Sanded And Painted. Waterweld Has A Set Time Of 15-25 Minutes And Sets Hard In One Hour. Waterweld Cures To An Off-white Color Is Rated At A Tensile Strength Of 900 Psi And Will Withstand Temperatures Up To 300 Degrees F. Use On:automotiveceramicfiberglassmetalplastic/composite/pvcunder Water/wetand Moreinstructions1. Cut:remove Required Amount Of Putty. 2. Mix: Thoroughly Knead Putty With Fingers To A Uniform Color. 3. Apply: Press Putty Firmly To The Surface To Be Repaired. J-b Weld Is Proudly Made In The Usa

J-B Weld 8277 WaterWeld Underwater Epoxy Putty - 2 oz

J-B-Weld-8277-WaterWeld-Underwater

Review from K. Weber, Missouri I Tried To Use This To Fix A Slow Leak On A Toilet Feed Line. The Leak Was About A Drop Every Five Seconds. I Turned The Water Off Allowed Everything To Drip Out Dried The Pipes With A Hair Dryer And Followed The Directions To Try To Stop The Leak. It Did Not Help. Probably It's Difficult To Stop This Sort Of Leak With This Type Of Leak In A Feed Vs. A Drain Line. As The Manufacturer Notes Sometimes The Pipe Is So Bad Putty Is The Wrong Solution. The Pipes Are C. 1928 So Plenty Old But I Was Hoping For More. Your Mileage Will Definitely Vary.

J-b Weld 8277 Waterweld Underwater Epoxy Putty - 2 Oz (J B Weld) Review

Review from X. Paula, Trafford 
I Used This To Repair A Leaking Shower Door. The Metal Track The Door Slides Along Had A Gap In One Of The Corners That Water Was Able To Seep Through And Leak Onto The Floor. I Tried Caulking It To No Avail. Waterweld Finally Solved The Issue And It Has Been Holding Up Very Nicely Even When Water Pool In The Area.
J-B-WELD-8277-WATERWELD-UNDERWATER-EPOXY-PUTTY---2-OZ-(J-B-WELD)
Image of J-b-weld-8277-waterweld-underwater-epoxy-putty---2-oz-(j-b-weld)"First Confession I'm Not An Engineer. Nor Do I Have A Graduate Degree In Epoxies. But My Favorite Coffee Mug Had A Broken Handle And The Mug Was Irreplaceable. Did A Little Research Grew A Pair And Purchased The Product. So Easyto Use I Tthought I Was In Grade School Art Class. Excellent Result! A Perfectionist Might Whine The Epoxy Turns A Pale Pink Color In The Dishwasher But I've Got My Mug Back! Couldn't Be Happier!"

I Used This Stuff To Plug A Few Leaks In My De-humidifier Downstairs. Wow Super Easy To Use (i Am Not Handy And Even I Could Cut Off What I Needed Kneed It Till It All Was The Same Color And Apply). So Easy And So Strong - This Quickly Plugged The Leak And It's Been Running Great Ever Since. If You Need To Plug A Leak Get This Product. If You Need To Make Sure A Pipe Fits Without Issue I Would Use This Product For That Too. It's Exactly What It Says It Is And That Is A Very Awesome Product.

E. Diana, Oxfordshire

I Used Two Tubes Of This To Seal Around The Outside Of The Drain On A Very Old Claw Foot Tub. The Tub Drain Was Rusted In Spots So Would Leak Water Onto The Floor Whenever The Tub Was Drained. Eventually We'll Mostly Likely End Up Replacing The Tub Altogether But Until We're Ready To Do So This Stuff Did The Trick! No More Leaks. It Was Easy To Mix/apply And Dried Quickly. It Worked So Well I'm Going To Purchase A Few More Tubes Just To Have On Hand In Case We Ever Need It.

I. Lisa, New York

J-B WELD 8277 WATERWELD UNDERWATER EPOXY PUTTY - 2 OZ Benefits
Brand :    j-b weld
Color :    Off White
Size :    2 oz
Weight :    0.5 pounds
Model :    8277
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Home (Automotive Parts And Accessories) reviews for J-B Weld 8277 WaterWeld Underwater Epoxy Putty - 2 oz available as-of ( Oct 2019 )
Sets in 30 minutes and paintable in 1 hourGreat for plumbing, tub, shower and drainsFully cures in 20-30 minutesPlugs holes and makes permanent repairsUse on automotive, ceramic, fiberglass, metalWorks on moist surfaces and under water

J-B Weld 50101 MinuteWeld Instant-Setting Epoxy Syringe - Dries Clear - 25ml

J-b Weld Minuteweld Syringeminuteweld Is A Special Formulated High-strength Two-part Instant Setting Epoxy. Minuteweld Will Set Under Most Temperature Conditions In One Minute. Minuteweld Is Designed To Adhere To Multiple Surfaces And Can Be Used On Ceramic Tile Glass Stone Most Plastics Wood And Metal. Use On:automotiveceramiccloth/carpetepoxy And Adhesivesfiberglassplastic/composite/pvcand Moreinstructions1. Prepare: Clean Surface Area Of Dirt Grease Oil Paint Or Loose Debris. For Best Results Use A Detergent Or Degreaser To First Clean The Surface Then Roughen Surface With File Or Coarse Sandpaper To Provide The Best Repair. 2. Mix: After Removing The Replaceable Cap Press Down On Plunger And Squeeze Equal Amounts Onto A Disposable Surface And Mix Thoroughly. 3. Apply: Apply With Appropriate Tool In An Even Coat Weld Bead Or Extruded Shape As Needed. 4. Dry: Sets In 1 Minute. Cures In 1 Hour. If Temperature Is Below 40 Degrees Fahrenheit Then Set Time Is Longer. J-b Weld Is Proudly Made In The Usa

J-B Weld 50101 MinuteWeld Instant-Setting Epoxy Syringe - Dries Clear - 25ml

J-B-Weld-50101-MinuteWeld-Instant-Setting

J-B-WELD-50101-MINUTEWELD-INSTANT-SETTING-EPOXY-SYRINGE---DRIES-CLEAR---25ML-(J-B-WELD)

Image of J-b-weld-50101-minuteweld-instant-setting-epoxy-syringe---dries-clear---25ml-(j-b-weld)
J-b-weld-50101-minuteweld-instant-setting-epoxy-syringe---dries-clear---25ml-(j-b-weld)"J-b Weld 50101 Minuteweld Instant-setting Epoxy Syringe - Dries Clear - 25ml Auto Accessory 50101
  • Characteristic: Clear, instant setting two-part epoxy sets in 1 minute and cures in 1 hour
  • Characteristic: Tensile strength of 2850 PSI for a strong, permanent bond
  • Characteristic: Great for tile, most plastics, ceramic, glass and more
j-b weld 50101 minuteweld instant-setting epoxy syringe - dries clear - 25ml: j b weld auto accessory j-b weld minuteweld syringe. . minuteweld is a special "
J-B WELD 50101 MINUTEWELD INSTANT-SETTING EPOXY SYRINGE - DRIES CLEAR - 25ML Advantage
Brand :    j-b weld
Size :    25 Milliliter
Weight :    0.30 pounds
Model :    50101
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (j-b weld) reviews for J-B Weld 50101 MinuteWeld Instant-Setting Epoxy Syringe - Dries Clear - 25ml available as-of ( Oct 2019 )
Tensile strength of 2850 PSI for a strong, permanent bondJ-B Weld is proudly made in the USANo mess, no waste cap screws on one way to eliminate accidental mixing and ensure it won't dry outGreat for tile, most plastics, ceramic, glass and moreClear, instant setting two-part epoxy sets in 1 minute and cures in 1 hour

J-B Weld 8265S Cold Weld Steel Reinforced Epoxy with Hardener, 2 oz

J-b Weld Original Cold-weld Formula Steel Reinforced Epoxyj-b Weld Is The Original Cold Weld Two-part Epoxy System That Provides Strong Lasting Repairs To Metal And Multiple Surfaces. Mixed At A Ratio Of 1:1 It Forms A Permanent Bond And Can Be Shaped Tapped Filed Sanded And Drilled After Curing. At Room Temperature J-b Weld Sets In 4-6 Hours To A Dark Grey Color. A Full Cure Is Reached In 15-24 Hours. J-b Weld Has A Tensile Strength Of 3960 Psi And Sets To A Hard Bond Overnight. It Can Withstand Temperatures Up To 550f When Fully Cured. Use On:automotivebrickconcreteepoxy And Adhesivesfiberglassmetaland Moreinstructions1. Prepare: Clean Surface Area Of Dirt Grease Oil Paint Or Loose Debris. For Best Results Use A Detergent Or Degreaser To First Clean The Surface Then Roughen Surface With File Or Coarse Sandpaper To Provide The Best Repair. 2. Mix: Squeeze Equal Parts From Each Tube Onto A Disposable Surface And Mix Thoroughly. 3. Apply: Apply With Appropriate Tool In An Even Coat Weld Bead Or Extruded Shape As Needed. 4. Dry: Sets In 4-6 Hours. Cures In 15-24 Hours. Allow 4-6 Hours Before Handling And 15 Hours (minimum) Before Putting Object Back In Use. J-b Weld Is Proudly Made In The Usa

J-B Weld 8265S Cold Weld Steel Reinforced Epoxy with Hardener, 2 oz

J-B-Weld-8265S-Reinforced-Hardener

Review from R. Nellie, Manchester Just Like Buying It In The Store But It Came Right To My Door. I Have Used J-b Weld A Couple Of Times And It Is Really Tough Stuff. I Used This To Fix A Laptop Case That Was Broken. The Whole Corner Where The Screen Hinge Attached Was Broken Out Where It Screwed Into The Bottom Case (clamshell). This Held It All Together So I Could Screw The Hinge In And We Are Good To Go. Not As Good As A Laptop Case That Is Well Designed But Allows You To Make Repairs When Just Replacing The Part Is Not An Options (in My Case Because It Just Would Break Again So It Needed Reinforcement).

J-b Weld 8265s Cold Weld Steel Reinforced Epoxy Hardener, 2 Oz (J B Weld) Review

Review from C. Matherly, Oldham 
My Nissan Altima Handle Broke When I Was Trying To Open The Door And A New One Would Cost Me Like $100+. When I Read Online - Most Folks Suggested Me Not To Use Jb Weld Since It Would Not Be Able To Sustain The Force - But It Has Been 2 Months And It Is Still Holding With All The Usage. This Product Is Really Awesome - Make Sure To Follow The Instructions.
J-B-WELD-8265S-COLD-WELD-STEEL-REINFORCED-EPOXY-HARDENER,-2-OZ-(J-B-WELD)
Image of J-b-weld-8265s-cold-weld-steel-reinforced-epoxy-hardener,-2-oz-(j-b-weld)"I've Yet To Have Jb Weld Fail Me. I Have A Belt Buckle That Kept On Popping Off When I Used Gorilla Or Super Glue. I Applied Jb Weld Five Months Ago And It's Still As Solid As Ever. I've Used Jb Weld For A Variety Of Other Projects Binding Metal To Metal Wood To Metal Wood To Plastic Wood To Wood Etc. And It's Done The Job Every Time."

Broke A Piece Of Mim That If Not Repaired It Would Have Cost Me Hundreds Of Dollars To Replace The Part That Housed My High Mounted 3rd Brake Light. I Had To Use Super Glue To Set The Small Mim Part To The Larger Part Which Was Where The Brake Light Mounted On My 2011 Pilot. After The Super Glue Set I Applied The Epoxy. After Checking It 2 Hours Later I Surfed The Web To See If Applying Heat Would Speed Up The Curing Process. I Found Many Articles That Supported Applying Heat Which I Did. I Applied Heat With A Hair Dryer And It Set In 30 Minutes. Much Faster The The Hours Recommended. Weeks Later It's Still Holding. The Dealer Would Have Charged Me For The Whole Housing Assembly. Highly Recommend This Product.

O. Connie, South Dakota

It's Like My Lincoln Arc Welder Set At 75 Amps And Yet In A Bottle. Er Tube Use An Old Piece Of Cardboard From The Online Store Box It Comes In. Squirt Out Two Lines Of Goop Two Inches Long Each Line. Close Together. Mix The White Goop With The Black Goop Using A Toothpick Or Soda Straw And Then Place The Gray Mixture Where You Want The Weld Made. Wait 24 Hours And You Have Weld Spot. Drill It If You Want. It's Magic. Test The Extra Goop On The Straw Every 30 Minutes If You Are Nosey And Cannot Follow These Instructions. I Did. They Make One For Plastic Too. I Needed To Drill For Screws On My Weld So I Used This.

W. Kimberly, West Berkshire

J-B WELD 8265S COLD WELD STEEL REINFORCED EPOXY WITH HARDENER, 2 OZ Reviews
Brand :    j-b weld
Size :    2 oz
Weight :    0.17 pounds
Model :    8265S
Quantity :    1
Order click here :    normally ships in 24 hours
Home Improvement :    Best Auto Accessory (Home Improvement) reviews for J-B Weld 8265S Cold Weld Steel Reinforced Epoxy with Hardener, 2 oz available as-of ( Oct 2019 )
Waterproof, petroleum, chemical, and acid resistant when fully curedCan be drilled, tapped, machined, filed, sanded and paintedIncludes 1 fl. oz. of steel-reinforced epoxy and 1 fl. oz. of hardenerEasy to use, cures to dark gray, Use on automotive, brick, concrete, metal, Will set in 4-6 hours, and cure in 16-24 hoursStong and nontoxic after it has set and temperature resistant up to 500F, Tensile strength is 3,960 PSI
J-b Weld 8276 Kwikweld Quick Setting Steel Reinforced Epoxy - 2 Oz (J B Weld) Price : 3.49, was : 4.31 as 2017-01-18
USUKDEFRESITJPCNCAGlobal
United States
Great Britain
German
France
Spain
Italy
Japan
China
Canada
World Wide
J-b Weld 8276 Kwikweld Quick Setting Steel Reinforced Epoxy - 2 Oz (J B Weld) Reviewed by on jerdus.com

Top j-b weld 8276 kwikweld quick setting steel reinforced epoxy - 2 oz (j b weld) Content

The F.A.Q. for J-b Weld 8276 Kwikweld Quick Setting Steel Reinforced Epoxy - 2 Oz (J B Weld)

Used this product to install a replacement antenna on my car that snapped off. Ultimately had to drill out the previous antenna stem that screwed in which resulted in not being able to screw in the new antenna. Bought this product due to the conductive properties and i couldn't have been happier. Clear radio signal comes in. New antenna does not budge at all. Quick set.

A number of questions have been asked here.

Q&A

(0) Question: weird question i know but would i be able to glue my led light strip to the carpet part of my vehicle with this?


(1) Question: would this work on stripped motor mount bolts on my john deere riding mower or does the engine get too hot?


(2) Question: will this hold a shower shelf to tile?


(3) Question: will this adhere 2 pieces of case aluminum together?


(4) Question: do you think this could fix a crack in the bottom of a 150 gallon rubbermaid stock tank/water trough?


(5) Question: this should work on my recliner on my couch, on one of my braces broke???


(6) Question: will it work in contact with gasoline like for a fuel tank leak?


(7) Question: marine plastic


(8) Question: can this be used to bond plastic together? the description didn't specifically say--wondering if it may cause a reaction or not adhere. thanks!



(note) Question: where/how to get J B Weld (manufacturer's brand) accessories & similiar J B Weld's products

Answer:

Click the marked text to copy link to Clipboard

This was a great product for my assemblage art. I have avoided epoxy in the past because i was concerned about being able to mix it properly but that was not an issue. It was easy enough to mix and it set in 6 minutes as described, which was perfect because i needed to hold the item i was bonding until it set! the bond feels secure and permanent. I didn't notice any odor issues, like i have when i use other adhesives. I know i will use this again, but i have one complaint. It dries to gray. I didn't notice that when i purchased it and if i had, i am sure i would not have gotten it. I really need adhesive to dry clear. I will be able to use it on other projects, but not all.


Auto Accessory, BestsellersTop J-b Weld 8276 Kwikweld Quick Setting Steel Reinforced Epoxy - 2 Oz (J B Weld) FAQ Content

Best j-b weld 8276 kwikweld quick setting steel reinforced epoxy - 2 oz (j b weld) in review

I was afraid i would have to replace my entire ceramic bird bath because the bowl portion cracked during one of our freezing spells. I did a google search and discovered this wonderful stuff. Works like a charm. Would highly recommend. I plan to keep some on hand for future fixes.

W. Carol, North Lincolnshire

You might like to see J-b Weld 50101 Minuteweld Instant-setting Epoxy Syringe - Dries Clear - 25ml Auto Accessory 50101
  • Characteristic: Clear, instant setting two-part epoxy sets in 1 minute and cures in 1 hour
  • Characteristic: Tensile strength of 2850 PSI for a strong, permanent bond
  • Characteristic: Great for tile, most plastics, ceramic, glass and more
j-b weld 50101 minuteweld instant-setting epoxy syringe - dries clear - 25ml: j b weld auto accessory j-b weld minuteweld syringe. . minuteweld is a special J-b Weld 50101 Minuteweld Instant-setting Epoxy Syringe - Dries Clear - 25ml (J B
Or you might like to consider Fram Ca10013 Extra Guard Rigid Panel Air Filter Auto Part Ca10013
  1. Plus: Provides 2X the engine protection
  2. Plus: On-pack directions and illustrations provide clear installation instructions
  3. Plus: A clean air filter improves air flow and prevents dirt and dust from entering the engine
Fram-ca10013-extra-guard-filter: Fram Auto Part Fram Extra Guard Air Filters Are Engineered With An Advanced Filter Media That Has Been Through Rigorous Fram Ca10013 Extra Guard Rigid Panel Air Filter (Auto

C. Angelica, Colorado says

Very had to say anything bad about jb weld. Have used it for years on things ranging from cracked tractor engine block to emergency faucet repair. . Some of the old timers may remember the displays in hardware / auto parts stores. They had a golf ball attached to a coke bottle and dared anyone to pull it off:) i never saw anyone accomplish the feat. . If you follow instructions, you will not be disappointed.

D. Amanda, Brent

This product amazes me. No need to ever buy krazy glue ever again, jb weld kwik weld works on everything around the house. I've used on several things already within the past week i've bought it. 1) "gluing" glass and metal on a loose cabinet door. 2) wood on wood on a bed frame. 3) wood and metals on a loose chair leg screw.

G. Valdez, Corse says

I have used this on metal, plastic, metal-to-plastic and it worked very well. Pay close attention, of course, to an exact 50-50 ratio. It is a stiff material, compared to the usual epoxies, so a toothpick was handy to mix it completely. I have used other j-b weld products and they are all superb. One advantage of this particular package was its use of two small toothpaste tubes compared to the big hypodermic plunger package, which dispenses the two liquids unevenly and wastes a lot of it. This sets up quickly but i always let it sit for a day.

Q. Campbell, Ealing

This is an extremely useful product and i have used it to repair many broken or cracked things. It sets quickly and creates a strong bond. My most recent repair was a cracked power adapter for an external hard drive. I had dropped it, causing the adapter to crack and leaving the power pins loose. The repair worked great and saved me about $15. 00 for a new power adapter; and it used a minimal amount of the epoxy to fix. You'll get many uses from the kit depending on the size of the repair.

H. Harrison, Bracknell Forest says

Very had to say anything bad about jb weld. Have used it for years on things ranging from cracked tractor engine block to emergency faucet repair. . Some of the old timers may remember the displays in hardware / auto parts stores. They had a golf ball attached to a coke bottle and dared anyone to pull it off:) i never saw anyone accomplish the feat. . If you follow instructions, you will not be disappointed.

F. Cathy, Dorset

I use a lot of this on many projects- my favorite adhesive- from my sculpture to household applications. It is super strong and beats anything else i have found (excepting the rare adhesive for very specialized use). You can file and saw it after it sets, paint it (rough up the surface a bit first) . . . Its applicability goes on and on. The kwikweld is supposedly not quite as strong as a sister product, but i have yet to find it fail in any way. Perhaps a mechanic would prefer the stronger product for metal to metal applications. I would advise a little experimentation, particularly regarding set time. It is not liquid, but almost "flowable" when first mixed (1:1 with the 2 tubes-simple to remember and easy to do; the colors are slightly different before mixing). I usually lay out a strip of one not touching a strip of the other (no interaction until they meet) to approximate the quantity (prepare a little more than you think you will need, because there won't be enough time to mix more once the process is underway), and then mix when i'm ready for the join. I use the mix when it reaches whatever consistency i need. It will begin to get tacky within minutes-experiment-and then will set rather suddenly, at which point your mix is kaput. At first you can slather it on to fill irregularities, etc. And it can be quite useful as a filler in addition to an adhesive. If all you need to do is glue one piece of something to another, just spread it like butter on one surface, press the two pieces together, wiggle them around enough to spread the adhesive and wait for the set (i suppose a clamp would add strength to the join, but i've found that is seldom necessary, particularly if you hold or tape the two pieces together until the adhesive sets). I rarely use contact cement anymore, far too many irreversible problems. If any kwikweld oozes out of the bond, just scrape it off while it is still gooey. You can sand later if needed. You can even sculpt a bit with it once it becomes familiar. If you get a little on your fingers it will wipe off with a shop cloth or paper towel, or you can use a tsp substitute or something similar later if it has set on you (no worries about your fingers sticking together like super glue, which i have found nearly useless, anyway). J-b makes similar products, such as a woodweld, which i have also found useful (but this stuff also works on wood). Highest marks here!

L. Dorine, Arizona says

I was afraid i would have to replace my entire ceramic bird bath because the bowl portion cracked during one of our freezing spells. I did a google search and discovered this wonderful stuff. Works like a charm. Would highly recommend. I plan to keep some on hand for future fixes.

M. Rose, Western Australia

Everyone loves j-b weld. I once saw a web where people listed what the did with it. I've used it as a head gasket on an old chevy i had. The car was still running great when i sold it. . I also used it once to glue a starter back into a chevy small block. We broke a bolt off during the race. We came into the pits and cleaned the surfaces and put it back into place with one bolt - plus the j-b weld. We finished the race in 3rd place.

A. Guest, Wigan says

Excellent epoxy, set time is quick, don't mix more then a teaspoon or two at a time. Stays glossy and sticky for only two or three minutes, apply to surfaces to be bonded and clamp before it loses the glossy appearance for best bond.

S. Irene, Leicester

I use it to hold the handles on the hidden tang of the knives i make. It is more viscous then most liquid epoxies so it stick to both sides of the tang allowing me to position it between the sides of the handle without drips or runs. It is still liquid enough to flow to fill the voids.

P. Joanna, California says

Tried many other product prior to this one. This was the only one that held the metal leg on my blanket stand back together after my partner killed it with dumping my tool box on it. The clear ones never worked on the metal.

D. Elida, Western Australia

Great product! i've been using j-b weld and j-b kwik products for a long time. . J-b kwik is very fast setting, but i haven't noticed any difference in strength between the two. . But. I think the longer the set time, the more time it has to settle and ooze into all the micro pores of the material. Does that really matter? i don't know. . So, that said, get the j-b weld if you seek maximum bond, and j-b kwik if you don't want to wait for long set times. . This is the best, low cost, 2-part epoxy on the planet!



Leave a Reply

You must be logged in to post a comment.


Top j b weld 8276 kwikweld reinforced Review Content

Related Products

Product Image Gallery

Top-j-b-weld-8276-kwikweld-reinforced-4182006o1icy-Content