Light Northpole Lights Driving Off Road (18f c3cr) 3083

Review for led light bar pack cree flood

Price was $12.99. Lights look great! the mounting brackets could use a little altercations done to the mounting bracket as they aim the light straight out and can only adjust upward from there. However, i made a bracket bar that the assembly will mount to and it will be underneath my camper, at an angle, so it will work out perfectly! i just hope the light quality is good. I will test them and follow up soon.

-I. Cindy

Led Light Bar, 2 Pack 18w Cree Flood Led Pods Led Work Lights Driving Fog Lights Off-road, Truck, Car, Atv, Suv, Specifications: Beam: Flood Beam Operating Voltage: Dc 10-30v Power: 18w (6* 3w/pcs Cree Leds) Color Temperature: 6000k Lumen: 1980lm Lifespan: 30, 000 Hours Above Waterproof Rate: -Led Light Bar, Northpole Light 2 Pack 18w Cree Flood Led Pods Led Work Lights Driving Fog Lights Off-road, Truck, Car, Atv, Suv, Jeep

  1. Value: Tough Design: Black Painted High Quality Aluminum Housing, Stainless Steel Adjustable Mounting Bracket And Shatterproof Lenses With Ip67 Waterproof, Durable To Withstand Any Harsh Condition. Great Performance Of Waterproof, Dustproof, Shockproof And Anti-corrosion In Extreme Weather Condition.
  2. Value: Long Lifespan: Eco-friendly Low Power Consumption Design With Integral Heatsink For Longer Lifespan, Rated At 30, 000 Hours.

Deals Light Northpole Lights Driving Off Road (Auto Part) Generic

Buy Now

Preamble

Installed on rear of nissan titan as auxiliary reverse lights. Works perfectly and very bright when backing in dark areas. Connected to tailer hitch power. Mounting is solid and thick. Housing cast aluminum. Should work for a while but, i hoping for many years. I will update once winter is over. Best led light bar pack cree flood | Generic-Auto Part Review as-of ( Aug 2018 ) Value LED Light Bar, Northpole Light [2 Pack] 18W CREE Flood LED Pods LED Work Lights Driving Fog Lights for Off-road, Truck, Car, ATV, SUV, Jeep 2x high powered flood led work light bar, 6 x 3 watt high power cree white leds at 6, 000k color temperature with 1980 lumens. Tough design: black painted high quality aluminum housing, stainless steel adjustable mounting bracket and shatterproof lenses with ip67 waterproof, durable to withstand any harsh condition. great performance of waterproof, dustproof, shockproof and anti-corrosion in extreme weather condition.. Long lifespan: eco-friendly low power consumption design with integral heatsink for longer lifespan, rated at 30, 000 hours.. Dc 10v-30v operating voltage range: it can apply to different types of trucks, off-road vehicles, 4x4 jeep, suv, mining, boating, farming and heavy equipment etc.. Package contents: 2x northpole light 18w waterproof cree flood led light bar, adjustable mounting brackets, screws set and 12 month worry-free warranty. .

Led light bar, northpole light 2 pack 18w cree flood led pods led work lights driving fog lights for off-road, truck, car, atv, suv, jeep Review (18f c3cr)

We were looking for lights to add to a zero-turn (yes we plan to mow in the dark - just kidding). Initially looked at a single bar (same company), but would not align with the existing holes (not a good idea to add holes to a steel surface in a dampish environment). So, found these 2 little gems - mounting was easy and they look terrific. Falling in love with leds - really great light and can take a ponding over their filament competitors. If i needed something for off road (atv, jeep or truck) - these would be part of the accessory collection. -W. Sharon

Light Northpole Lights Driving Off Road

  1. Brand: Northpole Light
  2. ClothingSize: 2PCS 18W Flood Lights
  3. EAN: 0740690760081
  4. Product Dimensions:
    Height:3.15 inches
    Length:3.82 inches
    Weight:1.32 pounds
    Width:2.56 inches
  5. Manufacturer: Generic
  6. Part-Warranty: Parts
  7. Model: Generic
  8. MPN: 18F-C3CR
  9. Quantity: 2
  10. Part/Serial Number: 18F-C3CR
  11. Type: Automotive Parts And Accessories
  12. Category: AUTO PART
  13. Size: 2PCS 18W Flood Lights
  14. UPC: 740690760081

led light bar, 2 pack 18w cree flood led pods led work lights driving fog lights off-road, truck, car, atv, suv, Automotive Parts And Accessories, Specifications: beam: flood beam operating voltage: dc 10-30v power: 18w (6* 3w/pcs cree leds) color temperature: 6000k lumen: 1980lm lifespan: 30, 000 hours above waterproof rate: ip67 lens material: pc housing material: diecast aluminum product dimension: 97*80*65mm applications: except for off road vehicle lighting, it can also be applied to material handling, agricultural machinery lighting, marine led lighting and emergency & rescue led lights, such as: off-road vehicles: utv, sand rail, buggy, atv, suv, truck, train, motorbike, bus, tank etc. engineering vehicles: excavator, road roller, bulldozer, crane, fork lift and mining truck etc. specialized vehicles: fire engine, police car, rescue vehicle, communication vehicle, military command vehicle etc. others: boat, fishing, courtyard lamp, yacht, road/ street lamp, etc. why choose northpole light? - high quality product and service - 12-month warranty - 24-hour friendly email customer support Light Northpole Lights Driving Off Road (generic-Northpole Light).

Light Northpole Lights Driving Off Road Automotive Parts And Accessories

led light bar pack cree flood LED Light Bar, Northpole Light [2 Pack] 18W CREE Flood LED Pods LED Work Lights Driving Fog Lights for Off-road, Truck, Car, ATV, SUV, Jeep (Switch to Mobile/Desktop Version)

Good value for fog lights. These inexpensive wide angle lights are a great addition to our truck. The only negative is the quirky mount, that works best with the mounting bolt pointing down. With the mounting bolt on the bottom the light can be rotated from level to pointing downward. If they are mounted with the bolt on top they can't be pointed downward, only level or upward.

Led Light Bar, Northpole Light 2 Pack 18w Cree Flood Led Pods Led Work Lights Driving Fog Lights Off-road, Truck, Car, Atv, Suv, Jeep
Click to see NoticeLight Northpole Lights Driving Off Road (18f c3cr)"Very good quality so far. Good light output with no flicker. The mounting stud can be placed horizontal or vertical. Only 1. 5 amp current draw each at 12v"


Led Light Bar, Senlips 20inch 126W CREE LEDS Flood Spot Combo Beam Light Bar Driving Fog Light IP 67 Waterproof Off-road Vehicle, ATV, SUV, UTV, 4WD, Jeep, Boat- Black

Bright Light But Have Not Mounted It Yet Do To One Mount That Attaches To Light Has No Threads For The Four Bolts. Will Fix It Somehow

Wide uses: the senlips led light bar can be used as emergency light, camping light, vehicle repairing light, field operation light and so on. The senlips led light bar will bring you more convenience in your life. Safe driving: 6000k color temperature and 10500lms means you may have the clear view as in the noon, which will give you comfortable and safe driving. Specification: led power: 126 w (42pcs 3w high intensity leds) voltage: 10-30 v beam type: combo beam. Led color temperature: 6000k working life: 30000 hours working temperature: -40 c 85 c waterproof rate: ip67 material: 6063 diecast aluminum profile, aluminum bracket, pmma lens application: indoor and outdoor uses back up light off road lighting truck, trailer interior and exterior lighting construction lighting garden, backyard lighting boat lighting atv, vessels, bus, off-road vehicles, trucks, fire engines, forlifts, mining, trains, tanks, etc. Note: please check your state/provincial and local/municipal laws and regulations before installing the light bar. Senlips light bar assume no responsibility for any use or application of this product in violation of any applicable law.

Led Light Bar, Senlips 20inch 126W CREE LEDS Flood Spot Combo Beam Light Bar Driving Fog Light IP 67 Waterproof Off-road Vehicle, ATV, SUV, UTV, 4WD, Jeep, Boat- BlackSenlips-Driving-Waterproof-Off-road-Vehicle

Senlips Driving Waterproof Off Road Vehicle (OU9U4P8) FAQ.

This Light Does What It Should. Get Yourself Some Good Mounts And You're Ready To Go. I Mounted It On The Front Of My Honda Rancher -Notice from N. Dorine, Illinois

Click to Show senlips driving waterproof off road vehicle (ou9u4p8) Details

This Light Bar Is Very Bright And Was Easy To Install On The Front Of My Atv. Can't Go Wrong For The Price Would Definitely Buy Again!

Senlips-driving-waterproof-off-road-vehicle-(ou9u4p8) set picture

- U. FranklinGreat Projection And Quality Product The Outer Box It Came In Was Pretty Beat Up And Opened But The Inner Box Was In Decent Shape. Will Order Again When I Go To Mount Lights On The Roof Basket!

This Thing Is Awesome!!!! It Is So Bright At Night!!!! The Only Thing I Don't Like Is That You Have To Loosen 8 Bolts To Adjust It.

J. Patton, Nottingham

LED LIGHT BAR, SENLIPS 20INCH 126W CREE LEDS FLOOD SPOT COMBO BEAM LIGHT BAR DRIVING FOG LIGHT IP 67 WATERPROOF OFF-ROAD VEHICLE, ATV, SUV, UTV, 4WD, JEEP, BOAT- BLACK Advantage
Brand :    senlips
Color :    126W
Size :    126W
Weight :    5.80 pounds
Model :    126C-C3CR
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Part (senlips product review) for Led Light Bar, Senlips 20inch 126W CREE LEDS Flood Spot Combo Beam Light Bar Driving Fog Light IP 67 Waterproof Off-road Vehicle, ATV, SUV, UTV, 4WD, Jeep, Boat- Black available as-of ( Aug 2018 )
Price :    $21.67 (was $25.99)
  • Ip 67 waterproof standard protects your light bar from leaking. die cast aluminum housing gives your light bar a polished look and wide working temperature(-40 c 85 c)
  • 10500lms, combo beam with 60 degree flood beam, 30 degree spot beam, 6000k color temperature bring you comfortable and safe driving experience.
  • What you get: senlips 20" 126w led light bar, mounting brackets, screws, nuts and 12 month warranty.
  • High quality and eco-friendly led guarantee you 30, 000 hours using time.
  • Apply to more vehicles with power 126w, 10-30v operating voltage of led work light bar.

Nilight NI -WA 07 LED Light Bar Wiring Harness Kit REAR LIGHTS 12V 5Pin Rocker Switch Laser On off Waterproof Switch Power Relay Blade Fuse-2 Lead,2 Years Warranty

Product features: 12ft extendable wiring harness, 2 sets of connectors to light fixtures 5 pin on/off rocker switch, 12v dc power relay inline blade fuse, added two fuses for you note: maximum wattage: 180w; max ampere: 15a operating voltage: 12v dc power please finish the installation by professionals or install the wiring harness under the guidance of professionals.

Nilight NI -WA 07 LED Light Bar Wiring Harness Kit REAR LIGHTS 12V 5Pin Rocker Switch Laser On off Waterproof Switch Power Relay Blade Fuse-2 Lead,2 Years WarrantyNilight-NI-WA-07-Waterproof

NILIGHT NI -WA 07 LED LIGHT BAR WIRING HARNESS KIT REAR LIGHTS 12V 5PIN ROCKER SWITCH LASER ON OFF WATERPROOF SWITCH POWER RELAY BLADE FUSE-2 LEAD,2 YEARS WARRANTY Overview
Price :    $9.83 (was $13.10)
  • Two available leads: 12 feet extendable wiring harness, two sets of light output connectors for dual light fixtures less than 180w.
  • Package include: 1 x wiring harness kit, 1 x 5 pin led rocker switch, 1 x instructions
  • Efficient protection: power relay and inline blade fuse act as the first line of defense against overcurrent and short circuit.
  • Wide application: suitable for almost all 12v battery vehicles, such as jeeps, atvs, utvs, cars, motorcycles, ships, yachts and trailers.
  • Shining in the dark: built-in two premium leds emit soft light to illuminate the patterns, easy for you to find the switch in the dark.
Brand :    nilight
Size :    16AWG Rocker Switch Wiring Harness-2 Leads
Weight :    0.50 pounds
Model :    NI -WA 07
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Part (nilight product review) for Nilight NI -WA 07 LED Light Bar Wiring Harness Kit REAR LIGHTS 12V 5Pin Rocker Switch Laser On off Waterproof Switch Power Relay Blade Fuse-2 Lead,2 Years Warranty available as-of ( Aug 2018 )

Nilight NI-KIT01 LED Light Bar Mounting Bracket Kit LED Off-Road Light Horizontal Bar Tube Clamp Roof Roll Cage Holder ,2 years Warranty

Nilight horizontal bar clamp mounting kit simplifies the installation of nilight off road led light bars onto your roof rack, bull bar or head rack. The kit can be used for tubes sized at 1", 1-1/2", 1-3/4" & 2" in diameter. Includes an allen hex key with purchase. Color: black color application: can be used on tubes of 1", 1-1/2", 1-3/4" & 2" in diameter. Apply to most off road vehicles, cars, trucks, boats, farm vehicles, construction vehicles, etc. Can work with most led, hid, halogen lights, fog lights, driving lights, led work light and light bars. Package include: 2 x clamp 2 x 1" rubber insert (2 pieces) 2 x 1-1/2" rubber insert (2 pieces) 2 x 1-3/4" rubber insert (2 pieces) 2 x doubled sided tape 1 x allen hex key.

Nilight NI-KIT01 LED Light Bar Mounting Bracket Kit LED Off-Road Light Horizontal Bar Tube Clamp Roof Roll Cage Holder ,2 years WarrantyNilight-NI-KIT01-Mounting-Off-Road-Horizontal

NILIGHT NI-KIT01 LED LIGHT BAR MOUNTING BRACKET KIT LED OFF-ROAD LIGHT HORIZONTAL BAR TUBE CLAMP ROOF ROLL CAGE HOLDER ,2 YEARS WARRANTY Featured
Brand :    nilight
Size :    2PCS Mounting Kit
Weight :    0.90 pounds
Model :    NI-KIT01
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Part (nilight product review) for Nilight NI-KIT01 LED Light Bar Mounting Bracket Kit LED Off-Road Light Horizontal Bar Tube Clamp Roof Roll Cage Holder ,2 years Warranty available as-of ( Aug 2018 )
Price :    $5.50 (was $6.88)
  • Easy installation: pre-drilled hole, allows more lights to be added on vehicle without drilling, allen hex key included for quick installation
  • Useful rubber: high quality rubber inserts dampen driving vibration and avoid scraping bull bar surface
  • Package include: 2pcs led light bar mounting bracket
  • Sturdy bracket: strong aluminum alloy, fix the light on tube firmly, raise the light bar height to avoid scratches while driving
  • Wide application: can be used on tubes of 1", 1-1/2", 1-3/4" & 2" in diameter and applied to led light bar for almost all kinds of vehicle

LED Light Bar, Northpole Light 2 Pack 18W CREE LED Spot Lights LED Pods Fog Lights LED Work Lights Off-road, Truck, Car, ATV, SUV, Jeep

Specifications: beam: spot beam operating voltage: dc 10-30v power: 18w (6* 3w/pcs cree leds) color temperature: 6000k lumen: 1980lm lifespan: 30, 000 hours above waterproof rate: ip67 lens material: pc housing material: diecast aluminum product dimension: 97*80*65mm applications: except for off road vehicle lighting, it can also be applied to material handling, agricultural machinery lighting, marine led lighting and emergency & rescue led lights, such as: off-road vehicles: utv, sand rail, buggy, atv, suv, truck, train, motorbike, bus, tank etc. Engineering vehicles: excavator, road roller, bulldozer, crane, fork lift and mining truck etc. Specialized vehicles: fire engine, police car, rescue vehicle, communication vehicle, military command vehicle etc. Others: boat, fishing, courtyard lamp, yacht, road/ street lamp, etc. Why choose northpole light? - high quality product and service - 12-month warranty - 24-hour friendly email customer support

LED Light Bar, Northpole Light 2 Pack 18W CREE LED Spot Lights LED Pods Fog Lights LED Work Lights Off-road, Truck, Car, ATV, SUV, JeepLight-Northpole-Lights-Off-road-Truck

LED LIGHT BAR, NORTHPOLE LIGHT 2 PACK 18W CREE LED SPOT LIGHTS LED PODS FOG LIGHTS LED WORK LIGHTS OFF-ROAD, TRUCK, CAR, ATV, SUV, JEEP Spotlight
Brand :    northpole light
Size :    2PCS 18W Spot Lights
  • Long lifespan: eco-friendly low power consumption design with integral heatsink for longer lifespan, rated at 30, 000 hours.
  • 2x high powered spot led work light bar, 6 x 3 watt high power cree white leds at 6, 000k color temperature with 1980 lumens
  • Tough design: black painted high quality aluminum housing, stainless steel adjustable mounting bracket and shatterproof lenses with ip67 waterproof, durable to withstand any harsh condition. great performance of waterproof, dustproof, shockproof and anti-corrosion in extreme weather condition.
  • Dc 10v-30v operating voltage range: it can apply to different types of trucks, off-road vehicles, 4x4 jeep, suv, mining, boating, farming and heavy equipment etc.
  • Package contents: 2x northpole light 18w waterproof cree spot led light bar, adjustable mounting brackets, screws set and 12 month worry-free warranty.
Price :    $12.99
Model :    generic 18w
Quantity :    2
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Part (northpole light product review) for LED Light Bar, Northpole Light 2 Pack 18W CREE LED Spot Lights LED Pods Fog Lights LED Work Lights Off-road, Truck, Car, ATV, SUV, Jeep available as-of ( Aug 2018 )

MICTUNING MIC-B1002 LED Light Bar Wiring Harness, Fuse 40A Relay On-off Waterproof Switch

Purchased 5 of these for multiple light bars on different atv's. The wiring harnesses made the installation of the lights easy as all the connections were preassembled. I used these on 8 inch to 50 inch light bars with no problems. Can't beat the price for these.

Mictuning wiring harness for off road led lights is a perfect accessory for off road vehicles, working vehicles and any automobile that could use a relay to power specific equipment. This wiring harness is up to 10 feet and with 2 leads can hook up 2 light fixtures, it is universal fit for any 7" 10" 12" 20" 30" 40" light bars, espcially good for light bar within 180w. For light bar above 180w, we recommend you choose our mictuning heavy duty(hd) wiring harness for better job. Great construction quality wiring material - ul approved. Illuminated on/off toggle switch - can easily turn on/off the lights. Inline blade fuse & 40a relay - multiple safety protection. Universal fit - compatible with all automobiles, boats and devices equipped with a 10-30v power source. Quick & easy install 1. Connect the red+ wire from the fuse to battery +; connect the black wire from the relay to the battery -; 2. Connect the white+; black- wire from the relay to light bar(red/black correspond to the wire of lights bar) ; 3. Connect the red+/black- wire of the switch to battery or any place of your car system to get power for the switch; 4. Turn on on/off button of switch to test the lights bar. What you'll get: 1 yr mictuning warranty and lifetime friendly customer service. Package included:1 x wiring harness full wiring kit, 1 x diagram.

MICTUNING MIC-B1002 LED Light Bar Wiring Harness, Fuse 40A Relay On-off Waterproof SwitchMICTUNING-MIC-B1002-Wiring-Harness-Waterproof

Mictuning mic b1002 wiring harness waterproof (MIC-B1002) FAQ.

Decent relay switch at a fair price. The in cab switch is a little cheesy, but it does the job. Directions are straight forward , though they don't specify what size hole to drill for the toggle switch. I used a 3/4" wood bit and it fit just fine. Be sure you line it up straight before you push it all the way in. I'm only running 36watts off it so i can't attest to it's 40amp capability. It comes with leads for two separate lights. Ended up add an extension to one of the leads. 12' really isn't all that much once you start threading it around the engine compartment. All in all i would recommend. -Notice from X. Terry, District of Columbia

Click to Show mictuning mic b1002 wiring harness waterproof (mic-b1002) Details

This is a decent harness however there is one thing i would like to point out. It claims that the switch is "easily upgrade-able" and while installing a different switch is easy and straight forward, the relay in this harness does not have a protection diode across the coil terminals. When the relay is then turned off, the stored energy in the relay coil is released and since it has no where to go the voltage increases on the wire from the switch to the coil builds until it goes so high as to go over the reverse breakdown voltage level of the led in my fancy toyota style "zombie lights" switch that i upgraded to, killing the indicator led after just two uses. I will modify the switch or the harness to have a flyback diode but this harness would have been better if it already included it. . Other than that this is a solid, well made harness. If you buy it and plan on changing the switch i would advise you to add a flyback diode across the coil terminals on the relay. Even if you intend to modify the harness its a great starting point for the price.

Mictuning-mic-b1002-wiring-harness-waterproof-(mic-b1002) set picture

- U. MaysWhile wiring harness are glitchy and crafted effortlessly, mictuning is offering the mictuning led light bar wiring harness 40amp relay on-off waterproof switch that works just as you'd expect it to and then some. . It gives a very nice response when you flip the switch and it doesn't delay like some harnesses that are being sold and the button even glows red when it's switched to on, it doesn't have the flickering or buzzing issue like other harnesses. . Some things to note:. . 1. ) the harness is easily concealable, so its very manageable with where you want to place it. 2. ) the button can be placed just about anywhere due to it being a low profile circular button. (i have a 04 dodge ram 1500 and it fit perfectly under the light switch for my headlights. ). 3. ) it comes with installed fuse, so there shouldn't be any mishaps with the harness glitching out and causes either a flickering of the light bar or blowing of any bulbs in the light. 4. ) other harnesses that i've used stopped working after i tried them with too many items (8 to be exact), but this one worked with over 12 devices that i connected it to, so that i could make sure it would stand up to what i was going to use it for and it works perfectly. . Overall, this worked great on my 2004 dodge ram 1500 quad cab with numerous upgrades and mods. No issues whatsoever. . It's a very solid harness so far, the price is excellent for this new quality harness, and i can't find any reasons not to give it 5 out of 5! . . So. 5 stars out of 5!

I used this harness to add led headlights to my troybilt mustang pivot mower (zero-turn with steering wheel model) figuring that for $10 it would be easier deal with the excess wiring than running all of my own. The kit is well-made and a bargain for the price on online store. I took off one star for the starter toggle and lack of directions. It was easy to drill 3/4" hole and install the starter-toggle, but it did require disconnect of the three wires which were installed red, white, black. Once all was assembled and lights would not turn on, i had to disconnect and try again. Web-search sometimes showed red in center and sometimes white, so i tried red in center and still got no lights. I reversed black & white (white toward "off" and black toward "on") and finally got it working.

R. Candy, Alaska

MICTUNING MIC-B1002 LED LIGHT BAR WIRING HARNESS, FUSE 40A RELAY ON-OFF WATERPROOF SWITCH Review
Brand :    mictuning
Color :    Black
Size :    Wiring Harness Kit(max.180W)
Weight :    0.50 pounds
Model :    MIC-B1002
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Part (mictuning product review) for MICTUNING MIC-B1002 LED Light Bar Wiring Harness, Fuse 40A Relay On-off Waterproof Switch available as-of ( Aug 2018 )
Price :    $9.99 (was $15.99)
  • Mictuning mic-b1002 wiring harness kit with waterproof red on/off toggle switch and easy to install.
  • Cautions:we recommend professional installation, pls let professinal installer to wire the harness kit; if let the wire short circuit, the harness would melt and even caught a fire, we suggest that wrap all exposed wire with electrical tape to avoid a short circuit; pls make sure your light within power 180w, or it would got melt as well.
  • 10ft extendable wiring harness:up to 10ft of wiring that is plenty of length to put it where you want.
  • Details makes perfect:adopt flexible strand copper wire, up to 180 watt load capacity. it is universal fit for any 7" 10" 12" 20" 30" 40" light bars that is within 180w.
  • Great construction:40a power relay and inline blade fuse for multiple safety protection. with 2 lights output connections, it can hook with 2 led work light or 2 small watt led light bar and any else off road leds.

LAMPHUS Cruizer LED Off-Road Light Horizontal Bar Clamp Mounting Kit 1 /1.5 /1.75 /2 2 Clamps Includes Allen Hex Key User-friendly - For Light Bar Bull Bar Tube Clamp Roof Roll Cage Holder

They Do Not Fit 1 Inch Bars Like They Say. I Managed To Mount My Light Bar On My Rack By Using The Pre-drilled Holes. Not What I Wanted To Do But It Works For Now! Maybe It Would Fit An After-market Bumper Or Rack But It Didnt Fit The Front Stock Rack Of My Atv. On A Positive Note The Package Was All There And Was Delivered On Time!

Simplify led light bar installations on your roof rack, bull bar, or headache rackthe lamphus cruizer horizontal bar clamp mounting kit makes installing cruizer off-road light bars or other light bars with 10mm mounting screws onto your roof rack, bull bar, or headache rack a breeze. Deck out your ride with multiple led lighting accessories without ever having to drill into your vehicle's bodywork. Everything you need for installation is included (even an allen hex key) in this clamp mounting kit! excellent for off-road vehicle, marine, farm vehicle & other applicationsthis high-quality horizontal bar clamp mounting kit can be used on tubes measuring 1", 1. 5", 1. 75" and 2" in diameter. Install multiple light bars on a versatile range of applications, including off-road vehicles like jeeps, atvs, and utvs, or construction & highway maintenance vehicles. Precision-crafted quality painstakingly crafted from premium-grade cast aluminum, these clamps are designed to provide a strong, stable and secure mount for your off-road light bars. Rubber inserts are also included for a snugger fit with a larger range of tube sizes and protect your bars and racks from being damaged during installation. Features:simplifies the installation of led light bars onto your roof rack, bull bar, or headache rackcompatible with tubes of 1", 1-1/2", 1-3/4" & 2" in diameterfits all light bars with 10mm mounting screwsincludes allen hex keypackage content:2 x clamp2 x 1 rubber insert (2 pc)2 x 1-1/2 rubber insert (2 pc)2 x 1-3/4 rubber insert (2 pc)2 x 2 rubber insert (2 pc)doubled sided tape (for 2" tubes). 2 x allen hex key

LAMPHUS Cruizer LED Off-Road Light Horizontal Bar Clamp Mounting Kit 1 /1.5 /1.75 /2 2 Clamps Includes Allen Hex Key User-friendly - For Light Bar Bull Bar Tube Clamp Roof Roll Cage HolderLAMPHUS-Off-Road-Horizontal-Mounting-User-friendly

Lamphus off road horizontal mounting clamps (CRLBXXA3-X2) FAQ.

These Mounts Are Made Of Solid Metal And Have Quite A Bit Of Weight To Them. My Purpose Was To Mount A License Plate Bracket To 3/4" Square Tube Which I Reasoned Would Require Approx 1" Diameter Mounts. The Reviews Noting That The Mounts Don't Fit Snug On 1" Round Bar Had Me Concerned But I Ordered Them Anyway. After Applying The Smallest Diameter Rubber Adapters And Cranking Down The Allen Screws (nice Touch) As Far As Possible The Mounts Were Snug But Not Snug Enough On The Bars To Keep Them From Rotating Due To Wind Force. My Solution Was To Cut A Piece Of Old Serpentine Belt (approx 1-1/2" In Length) And Insert It Into The Rubber Adapter On The Top Side Of The Mount Prior To Compressing The Mount Around The Bar. This Resulted In A Very Snug Mount When Everything Was Tightened Down Completely. I Probably Would Have Used A Piece Of Belt On Both Sides Of The Mount Were I Mounting Something Heavier Like A Light And Am Confident The Grip Would Be More Than Substantial In This Case. I Feel These Mounts Are Fantastic For The Price And I'm Comfortable That The Serpentine Belt Fix Will Not Degrade Over Time Which Means I Will Utilize These Products And This Method Again In The Event That I Need To Mount To A Smaller Tube Or Bar. -Notice from S. Emma, City of Kingston upon Hull

Click to Show lamphus off road horizontal mounting clamps (crlbxxa3-x2) Details

Not Very Well Designed But Worse Yet The Seller - Online Led Store - Shipped Me Two Used And Incomplete. Product Issues: 1 - Will Not Retain To 1" And It's Easy To Move So I Installed It To A 1 1/8" Bar Using The Same Rubber Pads For The 1". It Holds Unloaded But I Can Still Twist It By Hand And Also Slide It Up And Down The Bar. The Bar Is A Yakima Load Bar 1 1/8 Inch And It's Powdercoated With A Rough Texture So It's Not Slick. This Was After Torquing The Bolts Down To 3. 5nm. 2 - The Holes In The Cap (clearance Holes) Are Tight So You Will Need Near Perfect Alignment To Get The Parts Assigned. I Recommend Opening The Holes Up A Bit. 3 - Rubber Creeps Over Time So This Will Compund The Issue From Item 1 4 - A Couple Of The Holes Were Clogged By The Coating So I Recommend Running The Bolts Through By Hand Before Installation So I Ordered Two Sets The First Time And Realized They Don't Fit The 1" But May Seem To Work On The 1 1/8" And Decided To Order Two More Sets. Then I Received Two Used And Incomplete Sets. The First Had Only 3 Rubber Pads Luckily A Complete Set For 1" Bar Which Was What I Needed. The Second Had 8 Rubber Pads But Only One For 1" And A Missing Split Washer. For Some Reason They Included A Pair Of Screws And Anchors In This Pack - In Case I Want To Mount My Lights To A Drywall Wall I Will Update This Post (a) Once I Go Through Customer Service And (b) I Put It Up On The Car And See How The Lights Hold Up. In The Meantime If Somehow Anyone Got Though Reading This Whole Thing I Would Caution You About Buying This. Unless Your Lights Are Very Light (pun Intended) I Would Look Elsewhere. First 3 Pics Are Of Set 1 4th And 5th Pic Are Of Set 2.

Lamphus-off-road-horizontal-mounting-clamps-(crlbxxa3-x2) set picture

- Y. LindseyI Like These Mounts. I Used Them For A 12" Light Bar On My 16' Grizzly 700. They Seems To Be A Bit Loose Using The Largest Rubber Inserts So I Used The Double Sided Tape Included With The Mounts. I Didn't Really Measure The Carrier Rack Tubes Before I Bought The Product I Just Guessed They Were 1 Inch So Technically This Mount Could Advertise 7/8th Inch Tubing As Well Given The Tape Is Used As An Extra Buffer. I Drove Around My Rough Trail For About 20 Minutes And The Light Was Still In The Position That I Tightened It Down In.

I Used Two Of These To Mount My Auxbeam Curved 32" 180w Led Light Bar To The Burn Bar On My Center Console. I Wanted To Pass The Pictures Onto Everyone. I Researched Clamps For A Couple Of Days Before I Bought These. They Held The Ten Pound Light Bar As I Bounced Across Baffin Bay With No Problems Never Moved. I Bought 4 Clamps And You Will See My 6" Spreader Lights To The Side Of The Console They Rotate To Where I Need The Light In The Boat And Clamps Went Hand In Hand With These Lights Also. I Am Going To Do A Test To See If Lamphus Is Reading These Reviews Because If They Are They Can Contact Me And I Will Give Them An Idea For Their Product.

N. Sandra, South Gloucestershire

LAMPHUS CRUIZER LED OFF-ROAD LIGHT HORIZONTAL BAR CLAMP MOUNTING KIT 1 /1.5 /1.75 /2 2 CLAMPS INCLUDES ALLEN HEX KEY USER-FRIENDLY - FOR LIGHT BAR BULL BAR TUBE CLAMP ROOF ROLL CAGE HOLDER Features
Price :    $10.87
  • Add more lights, less hassle- simplify the installation of led light bars & work lights without drilling any holes in the bodywork; quickly and securely mount lamphus cruizer series light bars or any other light bar with 10mm mounting screws to your roof rack, bull bar, roll cage, or headache rack.
  • Almost endless applications- can be used on tubes measuring 1", 1. 5", 1. 75" & 2" in diameter; perfect for off-road vehicles, atvs, utvs, trucks, jeeps, boats, farm vehicles & more.
  • Comes fully-loaded- includes everything you need to start mounting your favorite led light bars to your ride, including an allen hex key.
  • Rubber inserts dampen & protect- rubber inserts for snugger fitment with a wider range of sizes; help dampen vibrations during off-roading and protect your bull bar from being scraped.
  • Cast aluminum construction- precision-welded from cast aluminum, our clamps are strong & built to last.
Brand :    lamphus
Size :    2-Pack (Standard)
Weight :    1.25 pounds
Model :    CRLBXXA3-X2
Quantity :    2
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (lamphus product review) for LAMPHUS Cruizer LED Off-Road Light Horizontal Bar Clamp Mounting Kit 1 /1.5 /1.75 /2 2 Clamps Includes Allen Hex Key User-friendly - For Light Bar Bull Bar Tube Clamp Roof Roll Cage Holder available as-of ( Aug 2018 )

Nilight LED Light Bar Wiring Harness Kit 12V On Off Switch Power Relay Blade Fuse Off Road Lights LED Work Light,2 years Warranty

Product features: 10ft wiring harness, 2 sets of connectors to light fixtures illuminated on/off toggle switch - can easily turn on/off the lights. Inline blade fuse & relay - multiple safety protection. Note: maximum wattage: 180w; max ampere: 15a operating voltage: 12v dc power please finish the installation by professionals or install the wiring harness under the guidance of professionals.

Nilight LED Light Bar Wiring Harness Kit 12V On Off Switch Power Relay Blade Fuse Off Road Lights LED Work Light,2 years WarrantyNilight-Wiring-Harness-Switch-Warranty

NILIGHT LED LIGHT BAR WIRING HARNESS KIT 12V ON OFF SWITCH POWER RELAY BLADE FUSE OFF ROAD LIGHTS LED WORK LIGHT,2 YEARS WARRANTY Summary
Price :    $7.15 (was $8.41)
  • Universal fit: compatible with all automobiles, boats and devices equipped with a 12v power source
  • Package include:1 x wiring harness kit , 1 x instructions,
  • Illuminated switch: 3 pin on/off rocker switch with red indicator light when truing on, easy to turn on or off, has been passed test of 5, 000 times pressing.
  • Two available leads: with 2 sets of light output connectors for dual lighting fixtures less than 180w, the connection is more stable.
  • Circuit protection: power relay-safety protection and conversion circuit. blade fuse protects the circuit when overcurrent or short circuit occurs.
Brand :    nilight
Size :    16AWG Wiring Harness Kit - 2 Leads
Weight :    0.10 pounds
Model :    NI -WA 06
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Part (nilight product review) for Nilight LED Light Bar Wiring Harness Kit 12V On Off Switch Power Relay Blade Fuse Off Road Lights LED Work Light,2 years Warranty available as-of ( Aug 2018 )

LED Light Bar, Northpole Light 20 126W Waterproof CREE Spot Flood Combo LED Light Bar LED Off Road Lights Driving Fog Light Mounting Bracket Off Road, Truck, Car, ATV, SUV, Jeep

Quick delivery! i am very happy with this light bar on my vehicle. We live surrounded by national forests, it's really dark. No streetlight here, lol. This light bar is an awesome asset, as i am a volunteer for our fire department and do find myself out at night in all kinds of weather, this lights up my world!

Specifications: beam: spot flood combo operating voltage: dc 10-30v power: 126w (42* 3w/pcs cree leds) color temperature: 6000k lumen: 10500lm lifespan: 30, 000 hours above waterproof rate: ip67 lens material: pc housing material: diecast aluminum product dimension: 506*80*65mm applications: except for off road vehicle lighting, it can also be applied to material handling, agricultural machinery lighting, marine led lighting and emergency & rescue led lights, such as: off-road vehicles: utv, sand rail, buggy, atv, suv, truck, train, motorbike, bus, tank etc. Engineering vehicles: excavator, road roller, bulldozer, crane, fork lift and mining truck etc. Specialized vehicles: fire engine, police car, rescue vehicle, communication vehicle, military command vehicle etc. Others: boat, fishing, courtyard lamp, yacht, road/ street lamp, etc. Why choose northpole light? - high quality product and service - 12-month warranty - 24-hour friendly email customer support

LED Light Bar, Northpole Light 20 126W Waterproof CREE Spot Flood Combo LED Light Bar LED Off Road Lights Driving Fog Light Mounting Bracket Off Road, Truck, Car, ATV, SUV, JeepLight-Northpole-Waterproof-Driving-Mounting

Light northpole waterproof driving mounting (Northpole Light) FAQ.

Unit arrived well packaged and undamaged. Installation is not difficult but depends on the vehicle and access to good mounting points and under dash access. A schematic with the wiring harness (separate order) or a specific link would have been helpful. The harness was designed to accommodate 2 light units so the extra pair of wires had me confused for a while. (not as sharp as i used to be. ) if the unit is durable i'll probably install them on 2 other vehicles, a tundra and a motor home, both of which should be a piece of cake compare to the sienna. -Notice from H. Peggy, Brent

Click to Show light northpole waterproof driving mounting (northpole light) Details

Great value! very bright light, with led's focused for both distance and near (spot and flood). Mounting seems very secure. Hopefully it remains waterproof and i don't have to re-seal it like some other brands. I recommend a wiring harness similar to this: epauto 12v 40 amp off road led light bar wiring harness kit, 40a relay / fuse / on-off switch. That one has 2 output wires, so you can use one for this light in the front, and the other output for some brake lights or something.

Light-northpole-waterproof-driving-mounting-(northpole-light) set picture

- K. SarahProduct works well and is very bright, i would most certainly buy it again. Save your money and buy this light bar. I would have given it 5 stars except for the fact that when i got the product there was 3 fins slightly chipped and bent on the back, not the end of the world but enough to lose a star.

Very bright and easy to install! i was a little worried at first about mounting, but ot turned put to be a cinch. Looked so good on one truck, i bought one more for the other.

S. Clara, Alaska

LED LIGHT BAR, NORTHPOLE LIGHT 20 126W WATERPROOF CREE SPOT FLOOD COMBO LED LIGHT BAR LED OFF ROAD LIGHTS DRIVING FOG LIGHT MOUNTING BRACKET OFF ROAD, TRUCK, CAR, ATV, SUV, JEEP Pros
Brand :    northpole light
Color :    Spot-Flood Combo
Size :    126W
Model :    126C-C3CR
Quantity :    1
Order click here :    normally ships in 24 hours
  • Long lifespan: eco-friendly low power consumption design with integral heatsink for longer lifespan, rated at 30, 000 hours.
  • Package contents: 1x northpole light 126w waterproof cree spot-flood combo led light bar, adjustable mounting brackets, screws set and 12 month worry-free warranty.
  • Dc 10v-30v operating voltage range: it can apply to different types of trucks, off-road vehicles, 4x4 jeep, suv, mining, boating, farming and heavy equipment etc.
  • Tough design: black painted high quality aluminum housing, stainless steel adjustable mounting bracket and shatterproof lenses with ip67 waterproof, durable to withstand any harsh condition. great performance of waterproof, dustproof, shockproof and anti-corrosion in extreme weather condition.
  • 20" 126w high powered spot flood combo led light bar, 24 x 3 watt high power cree white leds at 6, 000k color temperature with 10500 lumens
Price :    $25.99
Automotive Parts And Accessories :    Best Auto Part (northpole light product review) for LED Light Bar, Northpole Light 20 126W Waterproof CREE Spot Flood Combo LED Light Bar LED Off Road Lights Driving Fog Light Mounting Bracket Off Road, Truck, Car, ATV, SUV, Jeep available as-of ( Aug 2018 )

Flood Led Light Bar Off Road Fog Lights Led Driving Lights Vehicle Truck SUV ATV 18W 2PCS Waterproof

Package includes: 2pcs * 18w led work lights 2pcs * mounting brackets kit warranty informations: you will purchase a quality guaranteed and satisfied product, if not, 100% refund within 30 days! we are offering lifetime customer support . If you are not satisfied with our products, you can contact us anytime until you are satisfied! specification: beam type: flood beam led power: 18w(6pcs 3w high intensity cree leds) operating voltage: 9-30v dc current draw: 1. 5a12v, 0. 75a24v waterproof rate: ip 67 luminosity: 1800 lm optional beam: 60 degree color temperature: 6500k working life: 30000 hours above life time working temperature: -40 c 85 c optional color: black material:diecast aluminum housing , high quality led chips lens material:pmma mounting bracket: stainless steel light bar size(inch): 6*1. 6*1. 6, wire length(inch):8. 3 applications: off-road vehicles: 4wd, utv, sand rails, atv, suv, truck, fork lift, trains, boat, yacht, bus, and tanks etc specialized vehicles: fire engine, police cars, rescue vehicle, communication vehicle, military command vehicle etc engineering vehicles: excavator, dozer, road roller, bulldozer, crane and mining truck etc indoor and outdoor uses: indoor lighting such as courtyard lamp, garden, backyard, garage; outdoor lighting such as fishing , camping, road lamp, street light note: use a voltage transformer/converter to convert the ac 110-120v to dc 12v for indoor use.

Flood Led Light Bar Off Road Fog Lights Led Driving Lights Vehicle Truck SUV ATV 18W 2PCS WaterproofFlood-Lights-Driving-Vehicle-Waterproof

FLOOD LED LIGHT BAR OFF ROAD FOG LIGHTS LED DRIVING LIGHTS VEHICLE TRUCK SUV ATV 18W 2PCS WATERPROOF Overview
Brand :    iser
Size :    Flood LED
Weight :    0.88 pounds
  • Package includ:2pcs 18w led light bars and 2pcs mounting brackets. the light bar can be compatible with almost all jeeps, 4x4, trucks, motorcycles, suvs, atvs, cars, boats, etc. many indoor and outdoor uses: garden lighting, backyard lighting, back-up light, off road lighting, construction lighting and so on. if you want spot lights, please click on another link
  • Adjustable mounting bracket: screws nuts can firmly fix the led work light on its position and the direction of the flood light beam can be adjusted easily to about 60 degrees for perfect lighting
  • High protective performance:waterproof rate:ip67, led light bar can be used in heavy rain or harsh environments; aluminum alloy shell can make led work lights dustproof shockproof and anti-corrosion better
  • Super bright and wide illumination range: led flood beam light 18w includes 6pcs*3w high intensity cree leds; advanced led chips give out bright and white ray for clear visibility; 60 flood beam can provide super broad viewing area and special designed lamp cup leads to wider illumination range, allowing you to see the left and right clearly, it can be used as fog light, tail light
  • Better heat dissipation: special designed die-cast aluminum alloy heat sinks effectively extend the lifespan of the led light bar to over 30000 hours
Price :    $12.99 (was $22.99)
Model :    18900605435-1605111
Quantity :    2
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Phone Accessory (iser product review) for Flood Led Light Bar Off Road Fog Lights Led Driving Lights Vehicle Truck SUV ATV 18W 2PCS Waterproof available as-of ( Aug 2018 )

EPAuto 12 72W 7200lm Cree LED Light Bar Flood Spot Combo Beam Waterproof Mount Jeep / Van / Wagon / ATV / SUV / Pickup / Off-road

This Light Is Really Brite!! Great For Smaller Power Equipment. Light Is Constructed Well And Is A Simple Install. Hope This Helps.

24pcs x 3w cree leds (xb-d) metal mounting bracket included luminous flux: 5040lm 7200lm operating voltage: dc 9-32v combo beams: spot (30 degree) & flood (60 degree) working life: 30, 000 hours mounting stud: 1 inch certified by ce waterproof rate: ip67

EPAuto 12 72W 7200lm Cree LED Light Bar Flood Spot Combo Beam Waterproof Mount Jeep / Van / Wagon / ATV / SUV / Pickup / Off-roadEPAuto-7200lm-Waterproof-Pickup-Off-road

Epauto 7200lm Waterproof Pickup Off Road (AE-007-1) FAQ.

I Mounted On My Atv In Minutes It Is Crazy Bright! It Makes My Stock Headlights Look Like A Parking Light. Only Wish I Would Have Done This Years Ago. -Notice from Q. Franklin, New South Wales

Click to Show epauto 7200lm waterproof pickup off road (ae-007-1) Details

These Are Fantastic. Bought 2 Of Them They Are On My Kawasaki Mule. One For A Work Light & One Is For A Reverse Light . They Are Unbeatable Bright.

Epauto-7200lm-waterproof-pickup-off-road-(ae-007-1) set picture

- U. WatsonPerfect Addition To My Golf Cart. Easy To Mount And Wire Up. Turns The Night Into Day Allowing Me To Move Safely After Dark. Priced To Sell Without Breaking The Bank. Glad I Bought This Product.

8 Inch Pigtail. No Inline Fuse. No Switch. No Instructions Not That They Were Really Needed. I Will Be Returning This Item. Product Was Not Described As This.

V. Noguera, Herefordshire

EPAUTO 12 72W 7200LM CREE LED LIGHT BAR FLOOD SPOT COMBO BEAM WATERPROOF MOUNT JEEP / VAN / WAGON / ATV / SUV / PICKUP / OFF-ROAD Advantages
Brand :    epauto
Weight :    1.00 pounds
Model :    AE-007-1
Quantity :    1
Order click here :    normally ships in 24 hours
  • 24pcs x 3w high intensity cree leds
  • Combo beams: spot (30 degree) & flood (60 degree)
  • Metal mounting bracket included
  • Waterproof rate: ip67
  • Luminous flux: 5040lm 7200lm
Price :    $19.87
Automotive Parts And Accessories :    Best Auto Part (epauto product review) for EPAuto 12 72W 7200lm Cree LED Light Bar Flood Spot Combo Beam Waterproof Mount Jeep / Van / Wagon / ATV / SUV / Pickup / Off-road available as-of ( Aug 2018 )

led light bar, northpole light 2 pack 18w cree flood led pods led work lights driving fog lights for off-road, truck, car, atv, suv, jeep Price : 11.99, was : 12.99 as 2018-06-03
USUKDEFRESITJPCNCAGlobal
United States
Great Britain
German
France
Spain
Italy
Japan
China
Canada
World Wide
Light Northpole Lights Driving Off Road (18f c3cr) Reviewed by on jerdus.com

Top light northpole lights driving off road (18f c3cr) Content

The F.A.Q. for led light bar, northpole light 2 pack 18w cree flood led pods led work lights driving fog lights for off-road, truck, car, atv, suv, jeep

Great deal, buy some! greater yet customer service. Received an e-mail from the seller who seemed genuinely interested in making sure that i was pleased with the purchase and offered continued customer service support; pretty good for such an inexpensive purchase as this!

A number of questions have been asked here.

Q&A

(0) Question: what wiring harness kit is recommended for these lights?


(1) Question: can you tell me if there is a visual difference between the spot and flood led? or is it the lens that is different?


(2) Question: can these lights be submerged for hours at a time?


(3) Question: will this work on a 2011 can am outlander max 500 efi atv?


(4) Question: what amp fuse should i use? 3,5,7.5, or 10?


(5) Question: i want to install them in the roof of my car, are they ok for it?


(6) Question: do they come with wiring harness and switch? if not what should i buy



(note) Question: where/how to get Northpole Light (manufacturer's brand) accessories & similiar Northpole Light's products

Answer:

Click the marked text to copy link to Clipboard

Awesome fog lights. Mounted on a peg perego gator, the mounting hardware worked for what i was doing and they are amazingly bright. They draw a little bit of juice, cut the run time on the power wheel by ten minutes but the kids love it and cars and people can definitely see them outside from a ways off.


Accent & Off Road Lighting 15363751, Automotive 18148651, Light Bars 13303751, Lights & Lighting Accessories 12363751Top Light Northpole Lights Driving Off Road (18f c3cr) FAQ Content

Best light northpole lights driving off road (18f c3cr) in review

Very bright and easy to install. The only down side is that the mounting limits the amount of vertical swivel preventing them from being pointed all the way up or down. This is fine for installation on a bumper of a vehicle but i mounted mine high on a tractor canopy and the down angle was limited.

Y. Ophelia, Kingston upon Thames

You might like to see Da Microfiber Finishing Wax - 32 Meguiar's Da Microfiber Finishing Wax Uses A Rich Blend Of Polymers, Silicones, And Carnauba For High Gloss Protection. You'll Save Time During Application And Clean Up This Fast, -Meguiar's D30132 Da Microfiber Finishing Wax - 32 Oz.
  1. Featured: Rich Blend Of Polymers, Silicones And Carnauba For High Gloss Protection.
  2. Featured: Specially Formulated To Optimize Surface After Applying Da Microfiber Correction Compound.
Top Rated Meguiar's D30132 Da Microfiber Finishing Wax - 32 Oz. (Auto Accessory) D30132 Meguiar's D30132 Da Microfiber Finishing Wax - 32 Oz. (Auto
Or you might like to consider Replacement Emergency Car Portable Battery Jump Starter Cable Car Booster Cable 12v Car Jump Starter Battery Clips Spirit Anker Powerall Bolt Power Ispark Weego Cobra Ventura Features: 1. Anti Short Connection Protection:connect The Red Clip The Black Clip When The Power Is On, No Damage, No Sparkle 2. Anti-reverse Charge Protection:after The Car Is Started, -Replacement Emergency Car Portable Battery Jump Starter Cable Car Booster Cable 12v Car Jump Starter Battery Clips Spirit Anker Powerall Bolt Power Ispark Weego Cobra Ventura Portable
  1. Attribute: Car Battery Clamps.
  2. Attribute: Battery Clips.
Price Cut Replacement Emergency Portable Battery Powerall (Auto Part) Usagecable04 Replacement Emergency Portable Battery Powerall (Lotus

T. Rebecca, Croydon says

These are really awesome for the price! heck these would be really awesome for double the price. But i do have a question about them, i wonder if you can get a condenser or something for these because the ballasts tend to interfere with my radio system.

Z. Angela, Rhone-Alpes

Added to back of truck to assist factory backup lights. With these lights i can see behind me now when backing up. Put my first set of these lights on a truck a couple of years ago. They helped so much that i had to add them to my new truck's back up light system.

R. Pearce, New Hampshire says

The lights are very bright and look great. I put these lights on the front of my express van to help out in fog and they are awesome. Of course they are great for night also. I am considering ordering a set and putting them on the rear for back up lights. They are well worth the money i paid and i am well pleased with the lights.

P. Lawrence, New Jersey

Great lights. A little brighter than i expected/wanted to be. Using on front cargo carrier with marker lights in place of stock fog lights because they are covered by front carrier. Very easy install and can be adjusted up, down , left and right. Highly recommended

O. Irene, Nord-Pas-de-Calais says

Awesome lights! i bought a set for the front of the skid steer, worked so good and so inexpensive i bought a second set for the back. Bought a third set for the utv, mounted them on the push rack so when the snow plow is up it's not blocking the light.

X. Reed, Kentucky

Purchased this pair of led lights for the front of my atv. They are very bright and easy to mount and adjust. They are very well made and i think they will stand up to a lot of abuse when i'm riding my atv in back country. I mounted them to the front bumper i made and i added an on/off switch just incase the riders in front of me complain because the lights are to bright or when oncoming riders are approaching.

I. Cageen, Torbay says

Nice flood lamps. Good colour. Good spread. When aimed up at the ceiling they produce a bright even light for the interior of a small camper trailer. I've since installed the second lamp on the stbd side of the cat drag'd inn under the big awning. Great yard light.

E. Williams, Bayern

The good: these lights have a tough aluminum housing and are very bright. The light bean comes out at a wide angle, so they work well for seeing the sides of the road. As they are very bright, they work well as day time running lights too. . The bad: the power wires are very short and some hardware was missing. I had to buy wire and connectors. . The ugly: i had to make my own brackets to attach the lights to my car.

K. Alberta, Suffolk says

I'm only giving 4 stars because the adjustability wasn't great. They function great as back up lights ! . . .

A. Carrie, Bracknell Forest

Had to remove my factory fog lights from my 2004 f250 lariat because of the winch and winch mount. These lights were perfect replacement. Naturally, i had to cut the factory plug off and hard wire them in. No problem. They work great and i would recommend these lights. Led light bar, northpole light 2 pack 18w cree flood led pods led work lights driving fog lights for off-road, truck, car, atv, suv, jeep

G. Tracey, Utah says

Nice and bright. I added these to my snowblower so that i could see as the oem light stunk. As you can see these flood very well. The extended voltage range is a plus as the snowblower output voltage can vary quite a bit. My snowblower is ac out for the bulbs so i added a bridge rectifier and a couple of capacitors to filter the ripple.

M. Shawna, Windsor and Maidenhead

Not the brightest in the world but very good for the price, mounted two sets on forklifts for nighttime use. They provide enough light to drive by and identify materials on our outdoor storage racks (metal supplier)



Leave a Reply

You must be logged in to post a comment.


Top led light bar pack cree flood Review Content

Related Products

Product Image Gallery

Top-light-northpole-lights-driving-off-road-30831ejwb62u-Content