Lightfox Driving Mounting Bracket Warranty (Lite Way) 3085

Review for lightfox cree led light bar spot

Price was $12.77 - $42.29. Lights work great for backup lights and flood lights. The mounting systems kind of whack. I would prefer just a post and a hinge but they have a slide mechanism that is kind of complicated at first.

-L. Shawna

Lightfox 20inch 126w Cree Led Light Bar Spot Flood Combo Work Light Led Bar Driving Fog Light Mounting Bracket Off Road, Truck, Car, Atv, Suv, Jeep, 2 Years Introduction: Low Current Draw, No Harms To Battery And Save Gas Designed To Stand Any Condition, 6063 Aluminum Body For Strength And Durability Suitable Vertical Fins Design For Heat -Lightfox 20inch 126w Cree Led Light Bar Spot Flood Combo Work Light Led Bar Driving Fog Light Mounting Bracket Off Road, Truck, Car, Atv, Suv, Jeep, 2 Years Warranty

  1. Details: Oversize Heat Sink Fins For Efficient Heat Dissipation, Prolong The Lifespan Of The Light Up To 50, 000 Hrs.
  2. Details: Ip68 To Protect Against Worst Weather Conditions.

Bestseller Lightfox Driving Mounting Bracket Warranty (Auto Part)

Buy Now

Foreword

Easy install. Adjustable mounts allow for multiple install options. I was able to connect it to my jeep tj stock fog light wires. No need to add another switch. Best lightfox cree led light bar spot | Zhongxin-Auto Part Review as-of ( Jun 2018 ) Details Lightfox 20inch 126w CREE LED Light Bar Spot Flood Combo Work Light LED Bar Driving Fog Light with Mounting Bracket for Off Road, Truck, Car, ATV, SUV, Jeep, 2 Years Warranty Premium cree leds delivering pure white 6000k output. Oversize heat sink fins for efficient heat dissipation, prolong the lifespan of the light up to 50, 000 hrs. Ip68 to protect against worst weather conditions. Flexible mounting system with heavy duty brackets which allow mounting on any existing mounting hole. Up to 15000lm luminous flux reaching 250m 1lux .

Lightfox 20inch 126w cree led light bar spot flood combo work light led bar driving fog light with mounting bracket for off road, truck, car, atv, suv, jeep, 2 years warranty Review (93s012c)

So far, so good. The packaging was appropriate for the size of these lights. The lights have some bulk to them and feel well made. Of course, only time will tell if these hold up or not. It's been really dry around here and i haven't washed the vehicle yet. I may tighten the allen bolts on the front of the lights as others have suggested and i may add a bead of silicone to the front seals as well. The lights came with: mounting brackets, necessary mounting hardware, and short-ish wire leads protruding from the lights. The wire seems well supported where it enters the light. Again, time will tell if this is adequate at keeping water out. I'll probably add some silicone there was well. . One thing to note: the lights are not side specific (there is no right/left orientation). This is fine, although i almost installed the first one "upside down" and with the wiring facing up. I presume this would have increased the likelihood of water penetration at that point of the light. . I installed these on the back of my 3rd generation 4runner to give me the option of throwing light out the back for setting up camp in the dark. I did not want them wired to the back up lights so i ran wire from the battery, through the firewall, and down the interior of the vehicle before diving the wire back under the vehicle in the cargo area (where the wiring for the tow package came out). It was a little labor intensive running wire that far but the wiring of the lights themselves was basic and relatively easy. This way i can turn on the rear lights independent of which gear my vehicle is in. I can also turn the lights on even when the vehicle is off. . I purchased a 20-amp rated daystar switch for the dash and wired the lights directly through the switch, without a relay. I did put an inline fuse in between the battery and the switch however. These draw such a small amount of current (amperage) that a relay wasn't necessary. I estimate these are drawing less than 3 amps-the switch can handle that fine. Some might argue otherwise, but it's working great. . These work fantastic for giving me light out the back. They would also work well as extra back up lights or for hooking up to a trailer in the dark. My only regret thus far is that i didn't install them far enough back under my vehicle to protect them from rubbing on rough terrain. I crossed a dry creek bed and dragged the driver's side light on the ground once already. Bent the mounting bracket a bit, and scratched the aluminum light housing a little, but it still works great. I just bent the bracket back into place and continued on. . The brackets that come with these lights are fine and give plenty of room for angling the lights as desired. Unfortunately for how i wanted to install them, the brackets would not work. I made home-made ones from some simpson construction ties. These are commonly used to hold the frames of houses together and are readily available for cheap at most home hardware stores. I cut them to the length i wanted and bent them to a right angle with my hammer and a solid work bench as a support. It might also be a good idea to paint them to protect from effects of corrosion. I drilled two small holes in my trailer hitch supports (3/16 i believe). Hopefully the picture shows the setup well enough. Add some zip-ties and wire protection and, voila, done! -H. Lisa

Lightfox Driving Mounting Bracket Warranty

  1. Brand: LITE-WAY
  2. ClothingSize: 20" 126W Combo
  3. Color: Black Housing
  4. Product Dimensions:
    Height:3.00 inches
    Length:20.00 inches
    Width:3.00 inches
  5. Manufacturer: Zhongxin
  6. Part-Warranty: Parts
  7. MPN: 93S012C
  8. Quantity: 1
  9. Part/Serial Number: 93S012C
  10. Type: Automotive Parts And Accessories
  11. Category: AUTO PART
  12. Size: 20" 126W Combo

lightfox 20inch 126w cree led light bar spot flood combo work light led bar driving fog light mounting bracket off road, truck, car, atv, suv, jeep, 2 years Automotive Parts And Accessories, Introduction: low current draw, no harms to battery and save gas designed to withstand any condition, 6063 aluminum body for strength and durability suitable vertical fins design for heat dissipation longer valid irradiation distance than normal halogen bulb great performance of waterproof, dustproof, quakeproof technical specification: power: 126w 42pcs*3w high intensity cree leds working voltage: dc 9-32v lumen: 15000lm beam: flood beam(60 degree) & spot beam(30 degree) combo color temperature: pure white 6000k working temperature:-40 85 degree celsius dimension: 505*73*107mm/20inch*2. 9inch*4. 2inch approx protection rate: ip67 life span: 50, 000 hours material: 6063 aluminum profile, metal bracket, pc lens certified by ce, rohs package included: 1pc 126w led light bar adjustable mounting brackets screws set Lightfox Driving Mounting Bracket Warranty (-Lite Way).

Lightfox Driving Mounting Bracket Warranty Automotive Parts And Accessories

lightfox cree led light bar spot Lightfox 20inch 126w CREE LED Light Bar Spot Flood Combo Work Light LED Bar Driving Fog Light with Mounting Bracket for Off Road, Truck, Car, ATV, SUV, Jeep, 2 Years Warranty (Switch to Mobile/Desktop Version)

Very bright. We bought these and some others for an 8n ford that my dad and i converted to 12v. They are very easy to mount and wire up. . I've seen some reviews showing water damage and stuff, so far they haven't had any rain damage or looked like any of the other reviewers pictures, they're still working great and looking good. And it's been raining more here in oklahoma. I'll make sure to come back and update this if they start getting water damaged or anything.

Lightfox 20inch 126w Cree Led Light Bar Spot Flood Combo Work Light Led Bar Driving Fog Light Mounting Bracket Off Road, Truck, Car, Atv, Suv, Jeep, 2 Years Warranty
Click to see NoticeLightfox Driving Mounting Bracket Warranty (Lite Way)"Not installed yet, hooked up to battery at night to see how they light up, and they do put out a very sufficient amount of light. I plan on installing on a tractor but will have to modify a mount. Really wish these had a hinged mount on a u type bracket attached to the sides, for my application they do not have enough adjustment of the angle on the light for what i need. If mounting on a vehicle it would have enough adjustment for a straight forward light, but i need to angle the light almost 45 degrees and its just not gonna get anywhere close to that with this mount. May just put them on my riding lawn mower (lol) and mow at night when its cooler, and start over with my tractor work lighting."


EPAuto LED Light Bar Wiring Harness Kit, 12V 40A Relay / Fuse / ON-OFF Switch

An Excellent Buy For The Money. Read Other Reviews And Yes The Switch Is A Cheaper Quality Than What I Would Install So I Purchased Separately A Better Grade Of Switch. But For The Money And Time I Couldn't Go Wrong With A Pre-made Harness. I Also Made A Modification Of A Longer Ground Wire. For The Money This Can't Be Beat And The Led Lighting Has Had No Problems Since Installation. Saved Me A Lot Of Time And Hassle.

Package content power relay (40a) blade fuse (30a) 2 sets of power connectors to light fixtures illuminated rocker switch on/off rocker led user manual wiring instructions: choose your desired mounting location for the switch. Mark and drill one 3/4" hole. Use a sheet metal screw to mount the relay around the battery. Make sure the red wire from the relay can be connected to the positive terminal of the battery while the black wire can be grounded to the chassis. Connect the white wires to the positive input line of the auxiliary lights. Connect the black wires to the ground connection line of the auxiliary lights. Connect and install the white wire from the relay to the middle pin of the switch (copper colored). Link the red wire to the outer pin (copper colored) of the switch then route and connect it to a steady power source. Please make sure to use an in-line fuse rated at a minimum of 3a 12v dc when connecting this power feed wire directly to the battery. As your other option, you can also install this wire into an existing power wire in the cabin or into the cabin fuse box and this will exclude the need of an inline fuse. Attach the black wire to the pin of the switch (gold colored), route it then connect it to the ground chassis. Finally, push the switch into the 3/4" hole that you drilled out (step 1)

EPAuto LED Light Bar Wiring Harness Kit, 12V 40A Relay / Fuse / ON-OFF SwitchEPAuto-Light-Wiring-Harness-Switch

Epauto light wiring harness switch (AE-005-1) FAQ.

This Worked Great For Adding A Light Bar To My Golf Cart. This Will Power Two Lights Although I Only Use It For One. I Am Giving It 4 Stars Instead Of 5 Because One Of The Wires Was Not Long Enough But Was Easy Enough For Me To Extend. I Did Like That Ot Is A Complete Kit With The Switch Relay And Fuse. -Notice from I. Connie, Texas

Click to Show epauto light wiring harness switch (ae-005-1) Details

This Kit Might Need Some Modification To Fit Your Needs But With Basic Wiring Skills That Is Easily Done. The Wires Were Long Enough To Mount A 42 Inch Led Light Bar On The Roof Of A Side By Side.

Epauto-light-wiring-harness-switch-(ae-005-1) set picture

- V. PalmerWorthless For Wheeling Got Wet In The Trails And Junk Now Even After Its Dry Again. Doesnt Work In Mud Or Water. Its Also For 2 Lights Not Just One.

Worked Great For Some Led Headlights I Wired On My Zero Turn Mower. I Could Not Imagine Using This Wiring Harness On A Full Size Vehicle. It Would Have Been Way Too Short. This Is A Good Switch For Atvs/mowers/utv's Etc.

C. Glenda, Maryland

EPAUTO LED LIGHT BAR WIRING HARNESS KIT, 12V 40A RELAY / FUSE / ON-OFF SWITCH Featured
Brand :    epauto
Model :    AE-005-1
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (epauto product review) for EPAuto LED Light Bar Wiring Harness Kit, 12V 40A Relay / Fuse / ON-OFF Switch available as-of ( Jun 2018 )
Price :    $9.77
  • 2 sets of power connectors to light fixtures
  • Illuminated rocker switch on/off rocker led
  • Compatible with power source 12 volt dc.
  • 40a power relay & 30a blade fuse

MICTUNING Universal License Plate Mounting Bracket w/ Front Bull Bar Bumper Off Road LED Work Light Bar

This Was A Gift So I Have No Idea How Good The Quality Is Or Is Not. If I Hear Anything About It I'll Update My Review But The Recipient Was Very Excited To Recieve It So I'm Guessing 5 Stars Is Appropriate.

What's new? it's a mictuning customized license plate mounting bracket for our valued customers who are looking to mount lights on their vehicles with no convenient mounting locations, adding a nice look bull bar guard which is the newest on the market. Will this fit my vehicle? it universal fits most vehicles with the front license plate mount. How many lights can it hold? what's size can be compatible wit? depends on your lights' size. Usually 2 or 1. It has 4 different locations/methods to mount your lights. Compatible with any lights/lamps with bottom mounting screws, some samll size side mounted lights can be mounted by using extra bumper brackets. What can i do if some inconvenience occurs? mictuning is a leading auto parts brand, providing 1 yr worry-free warranty. Any question please feel free to email us through online store message, we'll assist you promptly.

MICTUNING Universal License Plate Mounting Bracket w/ Front Bull Bar Bumper Off Road LED Work Light BarMICTUNING-Universal-License-Mounting-Bracket

Mictuning universal license mounting bracket (MIC-LPM42) FAQ.

This An Awesome Product For The Price And It's Perfect For What I Needed It For As I Have A 20 Inch Light Bar Mounted On It. Very Cool Mount -Notice from N. Theresa, Western Australia

Click to Show mictuning universal license mounting bracket (mic-lpm42) Details

Product Is As Described. Light Modification Required For My 2005 Dodge 2500 But Took 10min To Install With Modifications!

Mictuning-universal-license-mounting-bracket-(mic-lpm42) set picture

- S. PeteLooks Good On The Truck. Hubby And Brother Had Fun Together Installing And No One Swore Or Threw Parts Across The Yard A Sure Sign Of Installation Ease. Lights Up The Night On Our Rural Roads.

Looks Very Easy To Installed. Received On Time And Very Practical. Can't Say How It Would Hold Up Cause I Haven't Installed It Yet.

Q. Rose, Milton Keynes

MICTUNING UNIVERSAL LICENSE PLATE MOUNTING BRACKET W/ FRONT BULL BAR BUMPER OFF ROAD LED WORK LIGHT BAR Spotlight
Price :    $21.98
  • Universal fitment. fits most car, jeep, truck, pickup, suv, 4x4, etc
  • What you get: 1 of universal license plate mounting bracket (lights not included)
  • Easy installation. no drill, no modification required, just like replace a license plate using its mount location
  • Customized design. specially designed for our valued customers who are looking to mount lights on their vehicles with no convenient mounting locations
  • Heavy duty. aluminum alloy, nicely powder coat black finish, 0. 12' thickness heavy duty design, great with dual lights or single light bar (less than 10 lbs. )
Brand :    mictuning
Size :    Mounting Bracket without Lights
Weight :    1.87 pounds
Model :    MIC-LPM42
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (mictuning product review) for MICTUNING Universal License Plate Mounting Bracket w/ Front Bull Bar Bumper Off Road LED Work Light Bar available as-of ( Jun 2018 )

EPAuto 2 Pack 4 18W 1260lm Cree LED Light Bar Spot Beam Waterproof Mount SUV/Boat/Jeep/Van/ATV/SUV/Offroad

I Bought These Lights For My Atv Because The Old Ones Sucked It Only Took Me An Hour To Install They Work Great And Look Great Really Bright

high output cree led lights body color: black led power: 18w/each light operating voltage: 9-32v dc theoretical lumens output: 1800 lm operating lumens output: 1260 lm spot beam: 30 degree working life: 50000 hours above life time mounting stud: 1 inch certified by ce waterproof rate: ip67

EPAuto 2 Pack 4 18W 1260lm Cree LED Light Bar Spot Beam Waterproof Mount SUV/Boat/Jeep/Van/ATV/SUV/OffroadEPAuto-1260lm-Light-Waterproof-Offroad

Pack Epauto 1260lm Waterproof Offroad (AE-006-1) FAQ.

Lights Are Pretty Bright But The Base Need To Have A Little Tighter Tolerances For The Fastener And That Mounts Tithe Base Beakers Lots Of Sop But For Under 20 Bucks It's Well Worth It! -Notice from X. Audrey, Northern Territory

Click to Show pack epauto 1260lm waterproof offroad (ae-006-1) Details

Exactly As It Said It Was. These Lights Have Held Up Well Over The Past Half Year At Least. No Problems With Waterproofing.

Pack-epauto-1260lm-waterproof-offroad-(ae-006-1) set picture

- P. SarahThey Are An Awesome Light Been Installing On Several Plow Trucks For Back Up Lights And Ordering More In A Minute Thanks

These Are Great Lights For Any Outdoor Vehicle. We Have Used Them Before For Our Rhino And These Will Be Installed On My Sons Atv. Great Light Output.

Y. Guest, Wolverhampton

EPAUTO 2 PACK 4 18W 1260LM CREE LED LIGHT BAR SPOT BEAM WATERPROOF MOUNT SUV/BOAT/JEEP/VAN/ATV/SUV/OFFROAD Overview
Brand :    epauto
Size :    2 Pack
Weight :    1.00 pounds
  • For suv boat 4 x 4 jeep lamp
  • One pair of 18w 30 degree high output cree led lights (1260lm)
  • Waterproof rate: ip67
  • Working temperature: - 40 85 degree, working life: 50000 hours
  • Mounting bracket is included. mounting stud: 1 inch
Price :    $14.87
Model :    AE-006-1
Quantity :    2
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Part (epauto product review) for EPAuto 2 Pack 4 18W 1260lm Cree LED Light Bar Spot Beam Waterproof Mount SUV/Boat/Jeep/Van/ATV/SUV/Offroad available as-of ( Jun 2018 )

Lightfox 8Pcs 18W 4Inch Spot LED Light Bar CREE LED Pod Fog Lights Square Cube Jeep Driving Work Lamp Offroad Truck 4WD SUV ATV UTV Daytime Running Light Waterproof, 2 Years Warranty

Technical specification: - power: 18 w(per unit) - operating voltage: dc 9-32v - operating lumens output: 1440-1800lm - beam type: beam: spot beam 30 - color temperature: pure white 6000k - waterproof rate: ip67 - working temperature: -40 85 degree centigrade - dimension: approx 99*73*107mm/ 3. 9*2. 87*4. 2inch - material: diecast aluminum housing - mounting bracket: adjustable mounting structure can be applied to any kind of cars - lifetime above 50, 000 hours life time applications: - indoor uses: garden lighting, backyard lighting - notices: you need to use a transformer to convert the voltage to 12v dc before indoor uses - outdoor uses: back up light, off road lighting, truck, trailer interior and exterior lighting, construction lighting, boat lighting - outdoor uses are mainly for jeep, cars, jeep, cars, trucks, motorcycles, buses, atvs, suvs, boats, construction equipment and many off-road vehicles notices: - the wiring harness needs to be used under relevant voltages - please match the wiring hardness with correct operating voltage package included: - 8 18w cree led work light - 8 adjustable mounting brackets screws set warranty: - warranty: 2 years warranty

Lightfox 8Pcs 18W 4Inch Spot LED Light Bar CREE LED Pod Fog Lights Square Cube Jeep Driving Work Lamp Offroad Truck 4WD SUV ATV UTV Daytime Running Light Waterproof, 2 Years WarrantyLightfox-Driving-Offroad-Waterproof-Warranty

LIGHTFOX 8PCS 18W 4INCH SPOT LED LIGHT BAR CREE LED POD FOG LIGHTS SQUARE CUBE JEEP DRIVING WORK LAMP OFFROAD TRUCK 4WD SUV ATV UTV DAYTIME RUNNING LIGHT WATERPROOF, 2 YEARS WARRANTY Benefits
Brand :    lite-way
Size :    8Pcs 18W Spot
Model :    93S01S*8
Quantity :    8
Order click here :    normally ships in 24 hours
  • 100% satisfaction guarantee: we are committed to business integrity quality after-sales guarantee! products were ertified by rohs, ce, fcc and ip67, 2 years warranty
  • Premium quality: designed to project light on extreme distance, high luminous efficiency, long life, longevity can be as high as 50, 000 hours
  • Powerful cooling performance: the heat-skin use aluminum alloy die-casting material with high thermal conductivity, which is much better for heat dissipation than normal light
  • Spot beam: 8 18w 4inch high intensity cree projection lenses focus more light on the road for ultimate offroad vision, 30 spot beam
  • Wide suitability: adjustable mounting structure can be applied to many different types of cars, trucks, motorcycles, buses, atvs, suvs, boats, construction equipment and many off-road vehicles
Price :    $46.69 (was $114.90)
Automotive Parts And Accessories :    Best Auto Part (lite-way product review) for Lightfox 8Pcs 18W 4Inch Spot LED Light Bar CREE LED Pod Fog Lights Square Cube Jeep Driving Work Lamp Offroad Truck 4WD SUV ATV UTV Daytime Running Light Waterproof, 2 Years Warranty available as-of ( Jun 2018 )

LED Light Bar Nilight 4PCS 18W 1260lm Spot led pods Driving Fog Light Off Road Lights Bar Jeep Lamp,2 years Warranty

Installed 6 Of These On My Back Rack 3 Months Ago Easy Install Very Bright Seemed To Be Of Good Quality Now All 6 Of Them Either Are Out Dim Or Flicker. They Boast A 2 Year Warranty Now In The Process Of Attempting To Get Them Replaced- Fi This Is What Happens To All Of Them I Would Not Have Spent The Time Drilling And Wiring Them Up To Replace Them 3 Months Later. --- Update--- Response To My Problem Was Almost Immediate The Seller Truly Cared About Correcting The Problem Emails Back And Forth. Lisa Sent Me Replacement Lights No Cost To Me As I Responded Back To Her Even If These Lights Don't Last Any Longer Than The Last Ones The Customer Service Was The Best I've Had Online Thank You

Specification: led power: 18w (6 x 3w high intensity led) beam pattern: spot beam; lumen: 1260lm input voltage: 9-30v dc (fits 12v, 24v vehicles) working lifespan: over 30, 000 hours working temperature: -40 85 degrees celsius led color temperature: pure white 6000k-6500k material: 6063 aluminum profile, high quality led chips, pc lens waterproof rate: ip67; waterproof, dustproof, quakeproof and anti-corrosive. Certifications: ce, fcc and rohs applications: off road lighting: back up light, atv, suv, truck, trailer, forklift, trains, boat, outdoor lighting, etc. Other lighting: excavator, dozer, road roller, crane, mining, tractor, harvester, grain drill, fire engine, rescue vehicle, etc. Household lighting: garden, backyard, garage, indoor lighting. (note: use a voltage transformer/converter to convert the ac 110-120v to dc 12v. ) note: they are aftermarket parts. Not d. O. T. Approved. Do not use if d. O. T. Is required. For off road use only. Before installing this product, please check your state/provincial and local/municipal laws and regulations. Nilight assume no responsibility for any use or application of this product in violation of any applicable law.

LED Light Bar Nilight 4PCS 18W 1260lm Spot led pods Driving Fog Light Off Road Lights Bar Jeep Lamp,2 years WarrantyNilight-1260lm-Driving-Lights-Warranty

Nilight driving lighting waterproof warranty (NI06A-18W) FAQ.

Testing I Purchased These Lights To Add To The Rear Of My Truck A 2013 F350. After Reading Reviews That These Units Allow Water To Infiltrate The Unit I Decided To Test Them Before Installation. As You Can See In The Photos The Lights Were Completely Submerged In A Bucket Of Water For About An Hour To See If Any Moisture Would Get Into The Housing. After Removing The Unit From The Water It Was Dried Using Compressed Air. I Then Disassembled The Light And Found No Water In The Housing At All. It Is Very Well Sealed With Rubber Gaskets At All Assembly Surfaces. Performance These Lights Were Purchased With The Intent Of Giving Me More Light While Backing Up To Hook Up Trailers. They Are Also Very Bright And Useful For Work When The Days Run Long. I'll Try To Get Some Pictures Of Them In Action And Update This Later. Gripes The Mounting Bracket Is Thin And Feels Like Aluminum. Don't Get Rough With It Or Will Break Or Bend. Would I Buy These Again Absolutely. I Purchased 8 Of These As I Plan On Installing Them On At Least Three More Trucks. And May Purchase More For Work Lights To Mount In My Toolboxes. -Notice from Z. Anonymous, South Tyneside

Click to Show nilight driving lighting waterproof warranty (ni06a-18w) Details

Wow! Wow! Wow! These Suckers Are Bright Beyond Expectation! Not Only That But They Are Built Like A Tank Strong Aluminum Construction That Looks To Be Bulletproof. Overall The Lights Are Much More Than I Expected. Did I Say Wow

Nilight-driving-lighting-waterproof-warranty-(ni06a-18w) set picture

- L. MeredithJust Bought And Installed Them On My 2016 Jeep Jk Took It For A Night Drive And There Super Bright!!

First Off For The Price You Can't Beat Em But If Your Expecting Some Insanely Bright Light You Need To Adjust Your Expectations. I Ordered 8 Of These And All Have Different Light Output One Is Extremely Dim. The Brackets Are Very Flimsy I Could Rip The Light Out Of Its Bracket When Installed. They Work In The Sense That You Turn On The Power And Light Comes Out They Are Good For Driving Lights Or Work Scene Lights For The Immediate Perimeter Of The Vehicle But Not Going To Light A Whole Trail.

E. Guest, Rochdale

LED LIGHT BAR NILIGHT 4PCS 18W 1260LM SPOT LED PODS DRIVING FOG LIGHT OFF ROAD LIGHTS BAR JEEP LAMP,2 YEARS WARRANTY Review
Price :    $21.64 (was $25.46)
  • Package includes: 4pcs 18w led light bars and mounting brackets
  • Super bright spot beam: high-quality led chips emit bright white light; concentrated spot beam illuminates to further distance.
  • Adjustable mounting bracket: the pod can be adjusted to about 45 degrees, which makes changing direction of light beam easier.
  • Withstand harsh conditions: 6063 die-cast aluminum alloy housing, clear and impact resistant pc lens, sturdy brackets.
  • Waterproof rate: ip67; waterproof up to 3. 3 feet of water for 30 minutes and effectively dustproof.
Brand :    nilight
Size :    4pcs 18w Spot light
Weight :    4.00 pounds
Model :    NI06A-18W
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Part (nilight product review) for LED Light Bar Nilight 4PCS 18W 1260lm Spot led pods Driving Fog Light Off Road Lights Bar Jeep Lamp,2 years Warranty available as-of ( Jun 2018 )

MICTUNING MIC-B1002 LED Light Bar Wiring Harness, Fuse 40A Relay On-off Waterproof Switch

I just installed this kit because the factory wiring/switch for the fog lights in my truck is junk. Not a big surprise since i also recently rewired both headlights due to cheap wiring/connectors. Sadly the wiring for the fog lights was ran up into the frame where i cant get at it to diagnose or repair the defect (without tearing my truck apart). When it arrived i was really pleased with the quality of the kit. Especially for the price. The connectors for the lamps are really nice and having a nice switch that lit up was a major selling point on this. The instructions are useless but if you have any idea what you are doing it wont matter. It does fail to mention that you need to drill a 3/4 hole for the switch. I had to chop the power and ground connections off and add ring terminals for the sake of a clean install. But it turned out perfect and works as needed.

Mictuning wiring harness for off road led lights is a perfect accessory for off road vehicles, working vehicles and any automobile that could use a relay to power specific equipment. This wiring harness is up to 10 feet and with 2 leads can hook up 2 light fixtures, it is universal fit for any 7" 10" 12" 20" 30" 40" light bars, espcially good for light bar within 180w. For light bar above 180w, we recommend you choose our mictuning heavy duty(hd) wiring harness for better job. Great construction quality wiring material - ul approved. Illuminated on/off toggle switch - can easily turn on/off the lights. Inline blade fuse & 40a relay - multiple safety protection. Universal fit - compatible with all automobiles, boats and devices equipped with a 10-30v power source. Quick & easy install 1. Connect the red+ wire from the fuse to battery +; connect the black wire from the relay to the battery -; 2. Connect the white+; black- wire from the relay to light bar(red/black correspond to the wire of lights bar) ; 3. Connect the red+/black- wire of the switch to battery or any place of your car system to get power for the switch; 4. Turn on on/off button of switch to test the lights bar. What you'll get: 1 yr mictuning warranty and lifetime friendly customer service. Package included:1 x wiring harness full wiring kit, 1 x diagram.

MICTUNING MIC-B1002 LED Light Bar Wiring Harness, Fuse 40A Relay On-off Waterproof SwitchMICTUNING-MIC-B1002-Wiring-Harness-Waterproof

Mictuning mic b1002 wiring harness waterproof (MIC-B1002) FAQ.

Used these harnesses to wire multiple led lights onto a jeep. There is a lot of extra wire that needs to be accounted for but it gives you flexibility depending on the application. I also replaced the switches to give a uniform appearance in my dash with other lights switches. -Notice from T. Carrie, Florida

Click to Show mictuning mic b1002 wiring harness waterproof (mic-b1002) Details

Purchased 5 of these for multiple light bars on different atv's. The wiring harnesses made the installation of the lights easy as all the connections were preassembled. I used these on 8 inch to 50 inch light bars with no problems. Can't beat the price for these.

Mictuning-mic-b1002-wiring-harness-waterproof-(mic-b1002) set picture

- Z. PalmerEverything was basic plug and play. Installed on my 2006 polaris sportsman 700. I have a homestead with many animals that require attention at all hours. This harness along with the auxbeam 4" 18w cree led lights work very well. Attached everything to the battery, drilled out a 3/4" hole to insert the switch and then the only hurdle was snaking wires. Very satisfied.

While wiring harness are glitchy and crafted effortlessly, mictuning is offering the mictuning led light bar wiring harness 40amp relay on-off waterproof switch that works just as you'd expect it to and then some. . It gives a very nice response when you flip the switch and it doesn't delay like some harnesses that are being sold and the button even glows red when it's switched to on, it doesn't have the flickering or buzzing issue like other harnesses. . Some things to note:. . 1. ) the harness is easily concealable, so its very manageable with where you want to place it. 2. ) the button can be placed just about anywhere due to it being a low profile circular button. (i have a 04 dodge ram 1500 and it fit perfectly under the light switch for my headlights. ). 3. ) it comes with installed fuse, so there shouldn't be any mishaps with the harness glitching out and causes either a flickering of the light bar or blowing of any bulbs in the light. 4. ) other harnesses that i've used stopped working after i tried them with too many items (8 to be exact), but this one worked with over 12 devices that i connected it to, so that i could make sure it would stand up to what i was going to use it for and it works perfectly. . Overall, this worked great on my 2004 dodge ram 1500 quad cab with numerous upgrades and mods. No issues whatsoever. . It's a very solid harness so far, the price is excellent for this new quality harness, and i can't find any reasons not to give it 5 out of 5! . . So. 5 stars out of 5!

U. Mays, Bremen

MICTUNING MIC-B1002 LED LIGHT BAR WIRING HARNESS, FUSE 40A RELAY ON-OFF WATERPROOF SWITCH Pros
Brand :    mictuning
Color :    Black
Size :    Wiring Harness Kit(max.180W)
Weight :    0.50 pounds
  • Cautions:we recommend professional installation, pls let professinal installer to wire the harness kit; if let the wire short circuit, the harness would melt and even caught a fire, we suggest that wrap all exposed wire with electrical tape to avoid a short circuit; pls make sure your light within power 180w, or it would got melt as well.
  • Details makes perfect:adopt flexible strand copper wire, up to 180 watt load capacity. it is universal fit for any 7" 10" 12" 20" 30" 40" light bars that is within 180w.
  • 10ft extendable wiring harness:up to 10ft of wiring that is plenty of length to put it where you want.
  • Mictuning mic-b1002 wiring harness kit with waterproof red on/off toggle switch and easy to install.
  • Great construction:40a power relay and inline blade fuse for multiple safety protection. with 2 lights output connections, it can hook with 2 led work light or 2 small watt led light bar and any else off road leds.
Price :    $9.99 (was $15.99)
Model :    MIC-B1002
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Part (mictuning product review) for MICTUNING MIC-B1002 LED Light Bar Wiring Harness, Fuse 40A Relay On-off Waterproof Switch available as-of ( Jun 2018 )

DT MOTO trade Off Road ATV/Jeep LED Light Bar Wiring Harness - 40 Amp Relay ON/OFF Switch

The wiring harness for led off road lights is the perfect accessory for off road vehicles, working vehicles, and any automobile that could use a relay to power specific equipment. Consisting of a 40 amp relay, an illuminated on/off switch, and more than 8 feet of wiring, this wiring harness for led off road lights simplifies the installation process of powering various equipment on all automobiles. Interchangeable/compatible with: all automobiles and devices equipped with a 10 to 30 volt dc power source. Features:illuminated on/off switch40a power relay30a blade fusemore than 8ft of wiring2 sets of power connectors to light fixturesproduct content:1 x wiring harnessowner's manual1 year warranty

DT MOTO trade Off Road ATV/Jeep LED Light Bar Wiring Harness - 40 Amp Relay ON/OFF SwitchDT-MOTO-trade-Wiring-Harness

DT MOTO TRADE OFF ROAD ATV/JEEP LED LIGHT BAR WIRING HARNESS - 40 AMP RELAY ON/OFF SWITCH Advantage
Brand :    dt moto
Size :    Double Lead Wiring Harness Kit
  • Illuminated on/off switch
  • 2 sets of power connectors to light fixtures
  • 40a power relay
  • 30a blade fuse
  • More than 8ft of wiring
Price :    $8.50
Model :    CB-WS12
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (dt moto product review) for DT MOTO trade Off Road ATV/Jeep LED Light Bar Wiring Harness - 40 Amp Relay ON/OFF Switch available as-of ( Jun 2018 )

LAMPHUS Cruizer LED Off-Road Light Horizontal Bar Clamp Mounting Kit 1 /1.5 /1.75 /2 2 Clamps Includes Allen Hex Key User-friendly - For Light Bar Bull Bar Tube Clamp Roof Roll Cage Holder

I Used Two Of These To Mount My Auxbeam Curved 32" 180w Led Light Bar To The Burn Bar On My Center Console. I Wanted To Pass The Pictures Onto Everyone. I Researched Clamps For A Couple Of Days Before I Bought These. They Held The Ten Pound Light Bar As I Bounced Across Baffin Bay With No Problems Never Moved. I Bought 4 Clamps And You Will See My 6" Spreader Lights To The Side Of The Console They Rotate To Where I Need The Light In The Boat And Clamps Went Hand In Hand With These Lights Also. I Am Going To Do A Test To See If Lamphus Is Reading These Reviews Because If They Are They Can Contact Me And I Will Give Them An Idea For Their Product.

Simplify led light bar installations on your roof rack, bull bar, or headache rackthe lamphus cruizer horizontal bar clamp mounting kit makes installing cruizer off-road light bars or other light bars with 10mm mounting screws onto your roof rack, bull bar, or headache rack a breeze. Deck out your ride with multiple led lighting accessories without ever having to drill into your vehicle's bodywork. Everything you need for installation is included (even an allen hex key) in this clamp mounting kit! excellent for off-road vehicle, marine, farm vehicle & other applicationsthis high-quality horizontal bar clamp mounting kit can be used on tubes measuring 1", 1. 5", 1. 75" and 2" in diameter. Install multiple light bars on a versatile range of applications, including off-road vehicles like jeeps, atvs, and utvs, or construction & highway maintenance vehicles. Precision-crafted quality painstakingly crafted from premium-grade cast aluminum, these clamps are designed to provide a strong, stable and secure mount for your off-road light bars. Rubber inserts are also included for a snugger fit with a larger range of tube sizes and protect your bars and racks from being damaged during installation. Features:simplifies the installation of led light bars onto your roof rack, bull bar, or headache rackcompatible with tubes of 1", 1-1/2", 1-3/4" & 2" in diameterfits all light bars with 10mm mounting screwsincludes allen hex keypackage content:2 x clamp2 x 1 rubber insert (2 pc)2 x 1-1/2 rubber insert (2 pc)2 x 1-3/4 rubber insert (2 pc)2 x 2 rubber insert (2 pc)doubled sided tape (for 2" tubes). 2 x allen hex key

LAMPHUS Cruizer LED Off-Road Light Horizontal Bar Clamp Mounting Kit 1 /1.5 /1.75 /2 2 Clamps Includes Allen Hex Key User-friendly - For Light Bar Bull Bar Tube Clamp Roof Roll Cage HolderLAMPHUS-Off-Road-Horizontal-Mounting-User-friendly

Lamphus off road horizontal mounting clamps (CRLBXXA3-X2) FAQ.

These Do Not Work When Mounting A Light Bar! The Rubber Used On The Mount Even When Cranked Down Still Moved Around And Even Tried It In Different Locations On My Atv. The Price Is Right But Your Better Off Taking Your $14. 99 And Flushing It Down The Toilet. Buyer Beware! -Notice from I. Hurst, Gloucestershire

Click to Show lamphus off road horizontal mounting clamps (crlbxxa3-x2) Details

I Like These Mounts. I Used Them For A 12" Light Bar On My 16' Grizzly 700. They Seems To Be A Bit Loose Using The Largest Rubber Inserts So I Used The Double Sided Tape Included With The Mounts. I Didn't Really Measure The Carrier Rack Tubes Before I Bought The Product I Just Guessed They Were 1 Inch So Technically This Mount Could Advertise 7/8th Inch Tubing As Well Given The Tape Is Used As An Extra Buffer. I Drove Around My Rough Trail For About 20 Minutes And The Light Was Still In The Position That I Tightened It Down In.

Lamphus-off-road-horizontal-mounting-clamps-(crlbxxa3-x2) set picture

- U. FabianNot Very Well Designed But Worse Yet The Seller - Online Led Store - Shipped Me Two Used And Incomplete. Product Issues: 1 - Will Not Retain To 1" And It's Easy To Move So I Installed It To A 1 1/8" Bar Using The Same Rubber Pads For The 1". It Holds Unloaded But I Can Still Twist It By Hand And Also Slide It Up And Down The Bar. The Bar Is A Yakima Load Bar 1 1/8 Inch And It's Powdercoated With A Rough Texture So It's Not Slick. This Was After Torquing The Bolts Down To 3. 5nm. 2 - The Holes In The Cap (clearance Holes) Are Tight So You Will Need Near Perfect Alignment To Get The Parts Assigned. I Recommend Opening The Holes Up A Bit. 3 - Rubber Creeps Over Time So This Will Compund The Issue From Item 1 4 - A Couple Of The Holes Were Clogged By The Coating So I Recommend Running The Bolts Through By Hand Before Installation So I Ordered Two Sets The First Time And Realized They Don't Fit The 1" But May Seem To Work On The 1 1/8" And Decided To Order Two More Sets. Then I Received Two Used And Incomplete Sets. The First Had Only 3 Rubber Pads Luckily A Complete Set For 1" Bar Which Was What I Needed. The Second Had 8 Rubber Pads But Only One For 1" And A Missing Split Washer. For Some Reason They Included A Pair Of Screws And Anchors In This Pack - In Case I Want To Mount My Lights To A Drywall Wall I Will Update This Post (a) Once I Go Through Customer Service And (b) I Put It Up On The Car And See How The Lights Hold Up. In The Meantime If Somehow Anyone Got Though Reading This Whole Thing I Would Caution You About Buying This. Unless Your Lights Are Very Light (pun Intended) I Would Look Elsewhere. First 3 Pics Are Of Set 1 4th And 5th Pic Are Of Set 2.

So The Metal Is Great. The Rubber Has Teeth On Both Sides So It Will Sink Into The Bar You Are Clamping And The Mount. What I Do Not Like Is That It Is Supposed To Fit On A 1 In Bar. I Have A Yakima Rook Rack On My Truck. It Has A 1 In (confirmed With The Company) Bar. So I Got These. When You Tighten The Supplied Screws Down All The Way The Metal On The Clamp Meets So It Can Not Clamp Down Anymore. The Mount Can Move Easily. It Is Not Tight. I Would Think On A 1 1/8 Or Thicker Bar It Would Be Fine. (yes I Am Using The Right Rubber For The 1 In. ) Pic Shows Me Pushing It Down With Ease. The Light Bar Is Only 43in And Is Light (as In Not Heavy I Realize It Is A Light :)

C. Angela, Southwark

LAMPHUS CRUIZER LED OFF-ROAD LIGHT HORIZONTAL BAR CLAMP MOUNTING KIT 1 /1.5 /1.75 /2 2 CLAMPS INCLUDES ALLEN HEX KEY USER-FRIENDLY - FOR LIGHT BAR BULL BAR TUBE CLAMP ROOF ROLL CAGE HOLDER Reviews
Price :    $10.87
  • Add more lights, less hassle- simplify the installation of led light bars & work lights without drilling any holes in the bodywork; quickly and securely mount lamphus cruizer series light bars or any other light bar with 10mm mounting screws to your roof rack, bull bar, roll cage, or headache rack.
  • Rubber inserts dampen & protect- rubber inserts for snugger fitment with a wider range of sizes; help dampen vibrations during off-roading and protect your bull bar from being scraped.
  • Comes fully-loaded- includes everything you need to start mounting your favorite led light bars to your ride, including an allen hex key.
  • Cast aluminum construction- precision-welded from cast aluminum, our clamps are strong & built to last.
  • Almost endless applications- can be used on tubes measuring 1", 1. 5", 1. 75" & 2" in diameter; perfect for off-road vehicles, atvs, utvs, trucks, jeeps, boats, farm vehicles & more.
Brand :    lamphus
Size :    2-Pack (Standard)
Weight :    1.25 pounds
Model :    CRLBXXA3-X2
Quantity :    2
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (lamphus product review) for LAMPHUS Cruizer LED Off-Road Light Horizontal Bar Clamp Mounting Kit 1 /1.5 /1.75 /2 2 Clamps Includes Allen Hex Key User-friendly - For Light Bar Bull Bar Tube Clamp Roof Roll Cage Holder available as-of ( Jun 2018 )

Lightfox 4Inch18W Spot LED Fog Light CREE Cube Light Bar LED Pods Lights Waterproof Jeep Driving Work Lamp Offroad 4wd Truck Pickup SUV ATV UTV Daytime Running Light 2 Pack

Technical specification: - power: 18 w(per unit) - operating voltage: dc 9-32v - operating lumens output: 1440-1800lm - beam type: beam: spot beam 30 - color temperature: pure white 6000k - waterproof rate: ip67 - working temperature: -40 85 degree centigrade - dimension: approx 99*73*107mm/ 3. 9*2. 87*4. 2inch - material: diecast aluminum housing - mounting bracket: adjustable mounting structure can be applied to any kind of cars - lifetime above 50, 000 hours life time applications: - indoor uses: garden lighting, backyard lighting - notices: you need to use a transformer to convert the voltage to 12v dc before indoor uses - outdoor uses: back up light, off road lighting, truck, trailer interior and exterior lighting, construction lighting, boat lighting - outdoor uses are mainly for jeep, cars, jeep, cars, trucks, motorcycles, buses, atvs, suvs, boats, construction equipment and many off-road vehicles notices: - the wiring harness needs to be used under relevant voltages - please match the wiring hardness with correct operating voltage package included: - 2 18w cree led work light - 2 adjustable mounting brackets screws set warranty: - warranty: 2 years warranty

Lightfox 4Inch18W Spot LED Fog Light CREE Cube Light Bar LED Pods Lights Waterproof Jeep Driving Work Lamp Offroad 4wd Truck Pickup SUV ATV UTV Daytime Running Light 2 PackLightfox-4Inch18W-Waterproof-Driving-Offroad

LIGHTFOX 4INCH18W SPOT LED FOG LIGHT CREE CUBE LIGHT BAR LED PODS LIGHTS WATERPROOF JEEP DRIVING WORK LAMP OFFROAD 4WD TRUCK PICKUP SUV ATV UTV DAYTIME RUNNING LIGHT 2 PACK Benefit
Price :    $14.14 (was $28.90)
  • Universal fitment: come with necessary accessories for easy installation, adjustable mounting structure can be applied to any kind of cars
  • Bright irradiation and energy conservation: designed to project light on extreme distance, brighter than 30w regular halogen headlight, but only uses 18w, lower power consumption!
  • Efficient heat dissipation: the casted aluminium for high rigidity and heat dissipation, which extends the light's life-span beyond 50, 000 hours
  • Spot beam: 2 18w 4inch high intensity cree projection lenses focus more light on the road for ultimate offroad vision, 30 spot beam
  • 100% satisfaction guarantee: products were ertified by rohs, ce, fcc and ip67, 2 years warranty. search for "lightfox 18w 4" led cree light" on youtube for how to video
Brand :    lite-way
Color :    Black
Size :    2Pcs 18W Spot
Weight :    1.30 pounds
Model :    93S01S*2
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Part (lite-way product review) for Lightfox 4Inch18W Spot LED Fog Light CREE Cube Light Bar LED Pods Lights Waterproof Jeep Driving Work Lamp Offroad 4wd Truck Pickup SUV ATV UTV Daytime Running Light 2 Pack available as-of ( Jun 2018 )

Auxbeam Wiring Harness LED Light Bar 12V 40Amp Fuse Relay ON/OFF Switch 2 Lead 2 Meter Universal

I Bought These Particular Lights Based Off A Review I Seen Of Them In A Video On Youtube. Was Instructed To Buy The Brand Auxbeam Since They Were Compared With Other Lights Similar To Them By Other Sellers. The Review Highlighted The Differences In Quality And Lead You To Believe Auxbeam Was Superior To The Others. Well This Is The Truth. The Mounting Brackets Are Cheap Thin And Paint Scratches Off Them With Your Fingernail. There Is No Rubber Grommet In The Light Where The Power Wires Enter Into The Housing. The Lights Themselves Have No Markings That Label Them As Auxbeam Like In The Video Review I Watched Or The Picture Of The Item I Purchased Here On Online Store. The Led's Are Not Centered And The Reflector Does Not Go Down Flush With The Led Like The Comparison That Was Made In The Video. As For Performance Well They Are Not Water Proof And As For Impact Resistant I Would Be Skeptical Yet The Video Did A Pretty Good Torture Test On The Lights. Problem Is I Think The Lights I Received Are Not The Same As The Ones Made By Auxbeam In The Video. The Lights Are Bright For Their Purpose Throw Off A Flood Like Spot And Seem To Be Working Well For The Price You'd Pay For Them. I Am Happy So Far As I Didn't Expect Too Much In Quality But I Was Disappointed To See They Did Not Represent The Ones In The Picture Or The Video And The Ad Description Leads You To Believe They Are Superior To Other Exact Type Led Lights Being Marketed And Sold By Other Competitors. Youtube/watch V Dzpxpotm36o

Introduction: universal harness kit with mouse style witch can wire two lights meanwhile dc12v 40a rated automotive relay can be assembled with a dc 24v relay(not supplied) blade fuse holder with replaceable 30a fuse up to 2m of wiring, terminal ends on most wires on/off switch with adhesive tape backing for easy mounting apply to: off-road driving light, fog light, work light etc package included: 1x wiring loom harness kit with fuse and relay

Auxbeam Wiring Harness LED Light Bar 12V 40Amp Fuse Relay ON/OFF Switch 2 Lead 2 Meter UniversalAuxbeam-Wiring-Harness-Switch-Universal

Auxbeam wiring harness switch driving (77707707-01) FAQ.

These Lights Are Very Bright Much Like The More Expensive Brands. They Were Also Well Packaged And Shipped In A Timely Manner. This Is My Second Order From This Company And Plan To Make At Least One More. -Notice from N. Anonymous, Maryland

Click to Show auxbeam wiring harness switch driving (77707707-01) Details

I Originally Purchased The 18w Cree Version Of This Light With The Chrome Reflector. I Wasn't Impressed. They Were About As Good As My Bright Lights And Despite Being A Spot Beam They Worked Like A Flood Beam. A Friend Recommended The Osram Version With The 4d Lens That You See Here. I Purchased A Pair And I Couldn't Be Happier. This Is What Auxiliary Lighting Should Be. Bright Focused And A Good Distance. Stainless Steel Mil-spec Breather To Breath Properly. Adjusting To Cold And Warm Temps. Giving It A Stronger And More Reliable Seal. Constructed With A Stainless Cord Relief. None Of Which Is Included On The 18w Cree Version With The Chrome Reflector. So If You're Undecided Between The Two I Would Recommend This Version. It's Just A Better Quality Light.

Auxbeam-wiring-harness-switch-driving-(77707707-01) set picture

- W. JacquelineExcellent Lights For The Money! Bought To Use As Fog Lights On My Motorcycle And Definitely Make The Difference I Was Looking For. Good Close Range Flood Lights With A Nice White Light. Only Thing That Would Make Them Better Is If One Had The Wiring On The Right And One On The Left Instead Of Both The Same But Not A Big Deal.

Very Solid Construction Never Had A Problem With Condensation Inside The Lense In The 4 Months I've Had Them Bought A First Set For The Top Of My Roof Rack As Backup / Work Lights And Ended Up Buying A Second Set For Forward Facing Lights And They Put Out About The Same Light As My 20" Lightbar On My Front Bumper. Going To Purchase A 3rd Set Soon To Have Side Facing Work Lights. Online Store Prime Helped With Getting Them To My House Faster So I Wasn't Sitting Around Waiting For Car Parts All Week. Great Light Have Recommended To My Friends And A Few Have Bought Them As Well. More Than Great Product For The Price. I've Added Pictures Of The Lights Themselves And Then Normal 35w Hids In Projector Housings And The Same Hids With The Forward Facing Pods On And Then The Rear With The Lights Off And Then With The Rear Facing Pods On. Hopefully The Review And The Pictures Will Help You Make A Decision To Buy These

O. Reed, Gloucestershire

AUXBEAM WIRING HARNESS LED LIGHT BAR 12V 40AMP FUSE RELAY ON/OFF SWITCH 2 LEAD 2 METER UNIVERSAL Advantages
Brand :    auxbeam
Size :    Wiring Harness for LED Light Bar (2 Lead)
Model :    77707707-01
Quantity :    1
Order click here :    normally ships in 24 hours
  • Blade fuse holder with replaceable 30a fuse up to 2m of wiring, terminal ends on most wires
  • Please pay attention to the operating circumstances. keep the wiring harness away from any moist or heat, such as rain, moisture environment, electro-heat equipment (engine and etc. ).
  • Dc12v 40a rated automotive relay can be assembled with a dc 24v relay (not supplied)
  • On/off switch with adhesive tape backing for easy mounting apply to: off-road driving light, fog light, work light etc
  • Package included: 1x wiring loom harness kit with fuse and relay
Price :    $9.79
Automotive Parts And Accessories :    Best Auto Part (auxbeam product review) for Auxbeam Wiring Harness LED Light Bar 12V 40Amp Fuse Relay ON/OFF Switch 2 Lead 2 Meter Universal available as-of ( Jun 2018 )

lightfox 20inch 126w cree led light bar spot flood combo work light led bar driving fog light with mounting bracket for off road, truck, car, atv, suv, jeep, 2 years warranty Price : 12.77, was : 0 as 2018-06-03
USUKDEFRESITJPCNCAGlobal
United States
Great Britain
German
France
Spain
Italy
Japan
China
Canada
World Wide
Lightfox Driving Mounting Bracket Warranty (Lite Way) Reviewed by on jerdus.com

Top lightfox driving mounting bracket warranty (lite way) Content

The F.A.Q. for lightfox 20inch 126w cree led light bar spot flood combo work light led bar driving fog light with mounting bracket for off road, truck, car, atv, suv, jeep, 2 years warranty

Would not recommend. Lights get condensation on the backside or inside of the glass. Takes away from the functionality of the leds. . Update: excellent customer service. Sent me out 2 new lights to replace the defective ones. Very promt customer service! would definitely recommend!

A number of questions have been asked here.

Q&A

(0) Question: what's the lowest voltage you can run these on, would like to put them on a dimmer switch?


(1) Question: can the mounts be moved or are they premade for one specific spot?


(2) Question: what is the color of the light?


(3) Question: any problem with water intrusion or moisture inside of housin?


(4) Question: does this come with wire harness?



(note) Question: where/how to get Lite Way (manufacturer's brand) accessories & similiar Lite Way's products

Answer:

Click the marked text to copy link to Clipboard

Verrry voltage dependent - barely on if tested with a 9v battery, yet blinding bright if fed 16v. . Very defined circular beam pattern with a pretty abrupt cutoff. . Mounting bracket design is kinda frustrating to work with, though, mounting nut has to be fastened (turned not just held) from the other side because the bracket base wont let you put a socket over the bolt, severely limiting your options for mounting to frame rails. And hole & bolt are faaaaaar too big to mount to existing bumper screws, yet far too small to use bolts that go through the frame. . Btw the bracket is a bit short, leaving you with far less possible mounting angles than you'd expect


Accent & Off Road Lighting 15363751, Automotive 18148651, Light Bars 13303751, Lights & Lighting Accessories 12363751Top Lightfox Driving Mounting Bracket Warranty (Lite Way) FAQ Content

Best lightfox driving mounting bracket warranty (lite way) in review

Put these on my compact tractor for reverse visibility and they are super bright and seem very durable, no issues with them so far

X. Lisa, Windsor and Maidenhead

You might like to see Wac 808 Hybrid V7 High Gloss Spray Sealant & Quick Detailer 1 This Product Is A Durable Sealant That Would Disappear Into The Surface In A Single Wipe Delivering Long Lasting Superior Optical Clarity And A High-shine Slick Finish. This Has Undergone -Chemical Guys Wac 808 Hybrid V7 High Gloss Spray Sealant & Quick Detailer 1 Gal
  1. Extra: A Durable Sealant That Virtually Disappears Into The Surface.
  2. Extra: Delivering Long Lasting Superior Optical Clarity And A High Shine Slick Finish.
Economical Chemical Guys Wac808 Sealant Detailer (Auto Accessory) Wac 808 Chemical Guys Wac808 Sealant Detailer (Auto
Or you might like to consider Da Microfiber Correction Compound - 1 Meguiar's Da Microfiber Correction Compound Uses Tiny Abrasives To Remove Swirls And Scratches Leaving The Vehicles Paint As Smooth As Glass. Correction Compound Generates No Sling -Meguiar's D30001 Da Microfiber Correction Compound - 1 Gallon
  1. Addition: Formulated To Remove Light To Moderate Flaws While Creating A High Gloss.
  2. Addition: No Sling And Low Dusting Formula For Minimal Prep And Clean Up.
Low-Priced Meguiar's D30001 Da Microfiber Correction Compound - 1 Gallon (Auto Accessory) D30001 Meguiar's D30001 Da Microfiber Correction Compound - 1 Gallon (Auto

N. Sherry, Nova Scotia says

I bought these to use as driving lights on my 2001 jeep cherokee. They are a little too large to fit in the designated pockets in the bumper without drilling a new mounting hole and cutting a small piece of bumper cover plastic away. Once the install was complete i was happy to discover that they are simply too bright for night time driving in traffic. I solved this by covering the top three lights with a strip of (black) duct tape. Still plenty bright enough to light the road and fields on each side of the jeep to spot deer before they run out in front of me.

X. Sheila, Delaware

So far so good. I got excited and installed it before i sealed or up with silicone like i think i may need to here in subtropical central florida, but it arrived well packaged, and is flat out fantastic for 20 inches of led power. I originally wanted to wire it up to my high beams, but ended up using a harness and running the click button up into the cab. Glad i did, because now i can use my legal high beams without pushing it with this light bar. Insanely bright for the size. I have no complaints. I mounted to a little license plate bully bar mount and it's perfect right there at the bumper. Easy to adjust and aim. Really happy with the quality for the price, and based on other reviews, it seems the brand stands behind the product. I may still disassemble and add some silicone to assure no leaks. But for now i'm totally happy. My only complaint is that it makes my headlights look like crap now.

C. Aldana, Halton says

I used this in place of the light on my snowblower. I used one for mine and gave the other to my neighbor to use on his once he saw how bright my new light was over the standard incandescent ligh.

E. Denise, Michigan

Not the brightest pod lights but get the job done for the price. I didn't want to spend a lot of money because i live in new york and everybody is a savage and they will most likely get stolen

E. Wilson, Missouri says

Replaced the stock low beam lights on my polaris atv with these. They are considerably brighter than the stock units and appear well built. My only complaint with them is the mount. The vertical adjusting screws are near the bottom of the mount and if mounted on a flat surface as mine are, they are almost impossible to get to without taking the main mount bolt loose. Makes verticle adjustment a real hassle.

S. Jacqueline, Redcar and Cleveland

Have had a pair of these mounted under the back of my truck for backup lights for almost a year no. No issues whatsoever. No water intrusion. I bought a second set and mounted them to the running boards on either side for use as curb lights - no issues either.

P. Juliana, Kentucky says

Considering their cheap price, i wasn't expecting much. I was prese toy surprised though, using 4 of these as floods on my john deere tractor for a while now, they are bright as can be, have a nice pattern and work flawlessly. I use my tractor in sun, rain and snow, and no condensation in the lens. Highly recommend.

C. Eleanor, South Dakota

I received new lights from customer service which was excellent and i have tried changing my review and updating my review several times but online store is not letting it go through love the new lights and no water issues look great and the best customer service i've dealt with on online store thank you. . I bought these on march 31st i installed them about a week later now it is the april 15th it just rain and i have moisture in one of them make sure you use rtv sealant or some type of silicone before you install them i cannot figure out how to contact the seller very poor product if they fix their gaskets i will most likely buy from lightfox again

K. Guest, Leicester says

Very good quality. Mounted to a golf cart. Angle range up and down is limited, so factor that before buying.

V. Heidi, Connecticut

Nice and bright for a smaller truck. I put this on a 1999 dodge dakota extended cab front bumper. It works great for dark roads and rainy weather. I am pleasantly surprised by the overall brightness and with it being a quality product.

D. Finch, California says

I have put two of these lights on the back of my skid loader, and i used two of them as fog lights on my truck. The overall quality and white production from these units are extremely well and for the price i would go ahead and order more in the future. The overall quality and light production from these units are extremely well and for the price i would go ahead and order more in the future.

A. Anonymous, Lewisham

Used these for making my motorcycle much more visible to traffic on a recent long trip. Mounted below my headlight on my highway bars, they not only increased my visibility to other drivers, they also helped light up the road and ditches, making it easier to spot animals that might be crossing the road. Worked very well for over 2, 300 miles and still going strong.



Leave a Reply

You must be logged in to post a comment.


Top lightfox cree led light bar spot Review Content

Related Products

Product Image Gallery

Top-lightfox-driving-mounting-bracket-warranty-30851emx5zzk-Content