Lincoln Lubrication 5803 Grease Needle Nozzle (Loln Electric) 5438

Review for lincoln lubrication grease needle

Price was $9.44. The product does not look exactly like the picture, the end is made of a delrin like polymer. She lubed the hard to reach u-joints on my old j10 without me having to remove the drive shaft, and that makes this nozzle priceless! just don't put too much side pressure on the nozzle, with the two score marks on the needle it could break pretty easily.

-T. Lara

Lincoln lubrication grease needle lincoln industrial grease gun screw-on adapter allows grease gun operator to contact flush type or hard to reach hydraulic type fittings. 26308005-lincoln lubrication 5803 grease needle nozzle

  • Feature: Use For Hard To Reach Hydraulic Fittings.

Discount Lincoln Lubrication 5803 Grease Needle Nozzle (Auto Accessory) 5803

Buy Now

Foreword

This is the grease nozzle needed by the dodge trucks to grease the strange hidden grease point in the transfer case front drive shaft u joint. Youtube it, most dealers don't evan know about it. The Best lincoln lubrication grease needle as-of ( Dec 2018 ) | Loln Lubrication-Auto Accessory Review Feature Lincoln Lubrication 5803 Grease Needle Nozzle Screw-on style. Use for hard to reach hydraulic fittings .

Lincoln Lubrication 5803 Grease Needle Nozzle Review (5803)

Like so many others i had a grease zerk on a universal joint that was difficult to get a grease gun coupler on securely enough to get grease into the joint. After way too much time trying i went looking for an alternative and this needle nozzle is it. I spent more time switching it for the coupler than i did getting grease where i wanted it. There is a small rubber composite material on the tip that makes a good seal easy. No squeeze out! can't recommend highly enough. Note: i even tried jacking the front of my truck up to get the joint to open up some more. This nozzle is just the ticket! -Y. Margaret

Lincoln Lubrication 5803 Grease Needle

  1. Class: Automotive
  2. Brand: Lincoln Electric
  3. Color: One Color
  4. EAN: 0767615245546
  5. Product Dimensions:
    Height:1.00 inches
    Length:4.00 inches
    Weight:0.5 pounds
    Width:2.00 inches
  6. Manufacturer: Lincoln Lubrication
  7. Part-Warranty: Parts
  8. Model: 5803
  9. MPN: 5803
  10. Total Items: 1
  11. Quantity: 1
  12. Part/Serial Number: 5803
  13. Type: Automotive Parts And Accessories
  14. Category: AUTO ACCESSORY
  15. Product Type: 26308005
  16. UPC: 013438024029
  17. Warranty: 1 Yr Warranty On Material And Workmanship

lincoln lubrication grease needle Automotive Parts And Accessories, Lincoln industrial grease gun screw-on adapter allows grease gun operator to contact flush type or hard to reach hydraulic type fittings. Lincoln Lubrication 5803 Grease Needle Nozzle (5803-Loln Electric).

Lincoln Lubrication 5803 Grease Needle Automotive Parts And Accessories

lincoln lubrication grease needle Lincoln Lubrication 5803 Grease Needle Nozzle (Switch to Mobile/Desktop Version)

Works on 3500 2014 ram 4x4. The famous unknown and unseen lubrication point on these vehicles requires this tool. The lube point is not a zerk fitting and it is not in the u-joint itself. It is just behind the rear u-joint on the front driveshaft. The lube point is a tiny silver inward dimple or depression in the yoke that holds this u-joint-the rearward part. If you follow it you can see behind it the rubber boot where your grease ends up if properly injected in. It is difficult to find due to the new bracing for the stiffer improved frame system. There is a big cross brace going under the yoke and u-joint as it feeds into the transfer case but it is still accessible from just in front of it. Slightly jack the truck enough to allow the drives front wheel to spin-jack stand the frame for safety. Get under there and slowly spin the front drive shaft until you find the grease "dimple" (it is small -half the size of a pencil erasure) and the are needs to be clean to see it. Once you find have this tool firmly threaded on to your grease gun flexible line -if alone you really need a pneumatic one (great one at northern tool). Spin the shat to where the grease dimple or port is at 3 o'clock (facing the passenger door. Awkwardly take the tool and bend the hose and line it up straight in it (there is even some curvature to the yoke carved out as a path). When you push the plastic tipped metal needle into the port it will only go about 1/16 of an inch and you will feel a slight click as it opens-that is all it is going to open. Then pull the trigger and shoot the grease in. If you are straight in on the tip applying moderate pressure all the grease will go in and i can see the boot behind swell with each pump. If you get off angle or don't have the port clicked open with the pressure the grease will not go in and will just make a mess at the port. A grease needle any longer would not work. If i had to pump, hold the hose and needle while getting it aimed straight in i could not do it-but with the air powered grease gun i was able to do it successfully. By the way i have a pretty good dealership and i am using my free oil changes and i can tell they are not greasing this fitting so i am glad this tool works so well.

Lincoln Lubrication 5803 Grease Needle Nozzle
Click to see NoticeLincoln Lubrication 5803 Grease Needle Nozzle (Loln Electric)"Screwed this onto end of grease gun hose to lubricate the end of my chain saw bars with a normal size grease gun. Instead of buying the small higher price grease guns that are made for that."


Funnels » Gas Cans » Grease Guns » Oil Drains » Oil Lube Systems » Transfer Tanks » Lincoln Lubrication 5803 Grease Needle Nozzle (Auto Accessory) 5803


LockNLube Grease Coupler locks onto Zerk fittings. Grease goes in, on machine. World's best-selling original locking grease coupler. Rated 10,000 PSI. Long-lasting rebuildable tool.

Bought Two Of These. One Works Exactly As Advertised. The Other One Slips Off 50% Of The Time So Grease Oozes All Over. Both Couplers Are On Identical Grease Guns - Lincoln 1162. So 5 Stars For One 1 Star For The Other. Their Website Has No Customer Service Department. Only A Toll Number And An Address. A Difficult To Find Website Instruction Says To Hold The Lever Forward If It Slips Off. Doesn't Work With The Pressures Involved. Plus Their Website Brag Is That It Is A One Hand Operation. Not So If The Other Hand Has To Hold The Lever. Now The Coupler Is Supposed To Come With Extra Jaws And A Seal For A 25% Greater Price According To The Website. I'm Going To Try The Toll Number To See What Happens. Edit Update: Just Got Off The Phone With Customer Service (i Believe It Was The Owner. ) We Had A Very Informative Conversation That Speaks Volumes About The Integrity And Genuineness Of The Company. I Am Very Pleased With The Results Of The Conversation And Would Rate The Company As A Whole As 5+ Stars. I Urge Anybody That Wants This Product To Feel Confident That It Will Work And In The Rare Case Of A Problem It Will Be Resolved.

The locknlube grease coupler is a long-lasting, rebuildable tool. Rated to 10, 000 psi the locknlube grease coupler does not leak and will not pop off once locked on. The thumb lever allows the coupler to easily release from stuck fittings, even at extreme pressures up to 10, 000 psi. It is not a throwaway part. It is compatible with any grease gun.

LockNLube Grease Coupler locks onto Zerk fittings. Grease goes in, on machine. World's best-selling original locking grease coupler. Rated 10,000 PSI. Long-lasting rebuildable tool.LockNLube-fittings-best-selling-Long-lasting-rebuildable

Locknlube grease gun coupler lock (GC81001) FAQ.

As An Industrial Service Technician Who Uses This Daily And Expects The Best. . . This Is It. I Love This Thing. I Can Hang Upside Down Off Of A Crane Lock It On And Not Have To Worry About It Falling Off. -Notice from U. Cecilia, East Riding of Yorkshire

Click to Show locknlube grease gun coupler lock (gc81001) Details

I Was Skeptical At First Despite The Overwhelmingly Positive Reviews But I Was Quickly Convinced This Is The Single Best Accessory Available For Any Grease Gun. I Am A Professional Auto Mechanic And I Pump A Lot Of Grease As Part Of My Day-to-day Work. Since I Added This Coupler To My Grease Gun (lincoln 1162 They Pair Together Superbly) I Have Not Once Seen Any Leakage Around A Grease Fitting. I've Used This On Some Dirty Chewed Up Caked On Fittings And It Still Manages To Grab Firmly And Seal Perfectly. As Others Have Mentioned The Only Issue I've Run Across Is Clogged Fittings. My Lincoln 1162 Pumps At 6 000psi Which Will Blow Open Just About Any Kind Of Gunk That Might Clog Up A Fitting But Once In A While I Find One Thats Just That Bad That I Can't Pump Anything Through It. When That Happens I Am In A Pickle. Even Under 6 000psi The Jaws Of The Lock'n'lube Don't Let Go. The Problem Being If I Hit A Plugged Fitting And It Doesn't Free Up The Lnl Gets Stuck On The Fitting Like A Pitbull Usually Requiring A Pair Of Channel-lock Pliers To Squeeze Down The Release Lever To Free The Coupler. It Is A Bit Larger Than A Standard Coupler And It Won't Fit Into Every Nook And Cranny But I Still Find It Useful In Those Situations As It Does A Great Job At Holding My Adapters And Specialty Tips In Place Allowing Me To Focus On Holding The Adapter Onto The Fitting Rather Than Holding The Coupler Onto The Adapter. Despite Those Couple Of Shortcomings I Still Like It Better Than A Regular Coupler In Every Way And Would Recommend This To Anybody.

Locknlube-grease-gun-coupler-lock-(gc81001) set picture

- B. AlbaThis Pricey Coupler Makes All The Grease Go Into The Zerk Fitting Every Time. You Need To Press The Lever To Remove It From The Zerk And (so Far Anyway) I Also Need Top Press The Lever To Connect It To The Zerk. If You Need To Grease A Lot Of Fittings This Is A Great Tool Because No Grease Escapes (less Mess) So None Is Wasted. I Have A Tractor And Attachments With Many Zerk Fittings (of Slightly Different Sizeds) That Require Frequent Greasing. This Coupler Is Really Worthwhile For My Needs.

When Trying To Grease A Zerk In A Tight Place This Locknlube Makes It Easy. Well Made And Very Solid Comes With Replacement Parts If You Ever Need Them.

X. Wimbish, Somerset

LOCKNLUBE GREASE COUPLER LOCKS ONTO ZERK FITTINGS. GREASE GOES IN, ON MACHINE. WORLD'S BEST-SELLING ORIGINAL LOCKING GREASE COUPLER. RATED 10,000 PSI. LONG-LASTING REBUILDABLE TOOL. Featured
Brand :    locknlube
Model :    GC81011
Quantity :    1
Order click here :    normally ships in 24 hours
  • Locks on, does not leak
  • World's only rebuildable grease coupler. lowest lifetime cost.
  • 1/8" npt compatible with all grease guns - battery, pneumatic, manual
  • Grease goes in, not on, the machine
  • World's original locking grease coupler.
Price :    $29.95
Automotive Parts And Accessories :    Best Auto Part (locknlube product review) for LockNLube Grease Coupler locks onto Zerk fittings. Grease goes in, on machine. World's best-selling original locking grease coupler. Rated 10,000 PSI. Long-lasting rebuildable tool. available as-of ( Dec 2018 )

Lisle 57180 Oil Filter Plug Tool Cummins , 1 Pack

Used to plug the oil filter when changing oil on 2013-2017 dodge ram cummins 2500/3500 heavy-duty trucks.

Lisle 57180 Oil Filter Plug Tool Cummins , 1 PackLisle-57180-Filter-Plug-Cummins

LISLE 57180 OIL FILTER PLUG TOOL CUMMINS , 1 PACK Benefits
Brand :    lisle
Color :    Original Version
Weight :    0.13 pounds
  • T-handle makes removal and installation easier
  • The tool also allows the technician to pre-lube the filter before installation
  • Threads into the filter for a secure seal so the filter can be removed from the tight space without spilling oil
Price :    $9.92 (was $13.98)
Model :    57180
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (lisle product review) for Lisle 57180 Oil Filter Plug Tool Cummins , 1 Pack available as-of ( Dec 2018 )

Lincoln Lubrication 5807 Grease Injector Needle Hose

Provides a solution to noisy sealed bearings, joints, chassis pivot points, dry splines, etc. Provides a way to apply a long-lasting lubricant into close-fitting areas allows access into difficult-to-reach areas includes a quick-connect coupler to limit grease by-pass includes a threaded protective cap that removes and reattaches safely and easily quickly attaches to all 3- and 4-jaw grease couplers for use with hand guns only

Lincoln Lubrication 5807 Grease Injector Needle HoseLincoln-Lubrication-5807-Grease-Injector

LINCOLN LUBRICATION 5807 GREASE INJECTOR NEEDLE HOSE Features
Brand :    loln electric
Weight :    0.25 pounds
Model :    5807
Quantity :    1
Order click here :    normally ships in 1-2 business days
Automotive Parts And Accessories :    Best Auto Accessory (loln electric product review) for Lincoln Lubrication 5807 Grease Injector Needle Hose available as-of ( Dec 2018 )

Valvoline SynPower Synthetic Automotive Grease - 14.1oz VV985

Valvoline's synthetic grease - formulated to provide superior high and low temperature protection. Synpower synthetic grease is an excellent heavy-duty and multi-purpose automotive and industrial extreme-pressure grease. Synpower is formulated with a lithium complex thickened in a synthetic base oil, moly and other premium additives to provide superior protection from high loads and extreme temperatures. Have techical questions, please feel free to call our tech service 1-800-teamval

Valvoline SynPower Synthetic Automotive Grease - 14.1oz VV985Valvoline-SynPower-Synthetic-Automotive-Grease

VALVOLINE SYNPOWER SYNTHETIC AUTOMOTIVE GREASE - 14.1OZ VV985 Highlight
Brand :    valvoline
Size :    14.1 oz
Model :    VV985
Quantity :    1
Order click here :    normally ships in 24 hours
  • For all u. s. , european & japanese vehicles
  • Moly-fortified for increased film strength and exceptional resistance to heavy loads
  • Extreme pressure fortified
  • Provides superior high- and low-temperature protection (-60 f to 425 f) over conventional greases
  • Nlgi 2 gc-lb lithium complex ep grease
Price :    $5.03 (was $10.25)
Automotive Parts And Accessories :    Best Auto Accessory (Automotive Parts And Accessories product review) for Valvoline SynPower Synthetic Automotive Grease - 14.1oz VV985 available as-of ( Dec 2018 )

Lincoln 1142 Grease Gun

For over 90 years, the industry has recognized lincoln as the leader in professional lubrication tools. Professional automotive, agricultural and industrial mechanics depend on lincoln tools for their livelihood. Lincoln tools offer a lifetime of performance and are backed by the most comprehensive warranty in the industry.

Lincoln 1142 Grease GunLincoln-Electric-1142-Grease-Gun

LINCOLN 1142 GREASE GUN Spotlight
Price :    $12.90 (was $21.55)
  • Rugged cast pump head for strength and durability
  • Jam-proof toggle mechanism prevents binding or accidental bending of plunger
  • Accessible check valve allows easy cleaning without gun disassembly
  • Precision fit and hardened plunger prevents lubricant bypass, resists scoring for longer life
  • Extra-heavy follower spring insures positive priming and uninterrupted pumping action
Brand :    loln electric
Weight :    2.00 pounds
Model :    1142
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (Automotive Parts And Accessories product review) for Lincoln 1142 Grease Gun available as-of ( Dec 2018 )

Lincoln Lubrication 1134 Heavy Duty Pistol Grip Grease Gun Whip Hose Rigid Pipe

Great grease gun. Had my last one of these for 6 years until i ran it over with my truck. Ya ya, i know smart move. Just got myself another one and it is just as good as my old one. Make sure to get yourself a locknlube coupler. It makes easy work of all zerk fittings.

Drake off road tools jam-proof handle return mechanism. Rugged one piece head casting. Follower is set for cartridge use. Style/type: pistol-grip pressure: 7, 5000 psi capacity volume: 16 oz. Cartridge size: 14. 5 oz.

Lincoln Lubrication 1134 Heavy Duty Pistol Grip Grease Gun Whip Hose Rigid PipeLincoln-Lubrication-1134-Pistol-Grease

Lincoln Lubrication 1134 Pistol Grease (Auto Accessory) FAQ.

The lincoln lubrication 1134 pistol grip grease gun is great. The gaskets, hose, grip and canister are of very high quality construction. . One thing though. The included coupler might as well be trash. It broke two of my zerk fittings before one finally found its way lodged into the coupler; forever ruining the coupler. Buy a nice coupler. I purchased the lumax lx-1400 to go along with this gun. -Notice from A. Joanne, Newfoundland and Labrador

Click to Show lincoln lubrication 1134 pistol grease (auto accessory) Details

Newbies like me might want to read this. Yep, my first fullsize grease gun. I had the mini cartridge gun before, but it didn't have enough volume to grease my tru-cut reel mower fully. So i bought this lincoln gun. I found out some things the hard way. . Loading a cartridge. Don't follow the instructions. They are difficult to follow. . 1. Simply unscrew the top (pistol) end from the tube. . 2. Now move to the bottom plunger end. Leave it attached to the gun body. Don't follow the written instructions shipped with the gun. With a lot of force, pull the "t" handle plunger out all the way, then angle it into the small slot opening. Look at the opening where the bar exits the gun body, and you will see the slot. You may or may not feel a little pop when the bar is pulled all the way out. The small slot allows the bar to remain in the pulled back position so you can let it go. As long as the bar will stay in place when you let it go, you're good. . *just be sure that the rubber cup and spring are pulled up as well. If not, you may need to rotate the bar against the cup to lock it together. When you pull up on the "t" bar, you will know if the rubber cup and spring are being loaded, because you will feel a lot of resistance. If not, then you might need to actually unscrew the bottom end from the grease gun body, so you can look at the plunger assembly and rotate it to lock them together. . 3. Open both ends of the grease cartridge and insert the slightly smaller end into the grease gun body. One end might have an aluminum lip that prevents that end from going into the gun. Go ahead and pop open the beer can. The aluminum lip sits on top of the grease gun tube and prevents it from sliding into the gun body. . 4. Screw the pistol end back on but leave it slightly loosened. Not sure why you need this, but if you don't, you might not be able to pump grease. . 5. With the pistol end on the gun, take the "t" bar out of the slot. If you rotate it slowly while pushing it in, you will find a point where you feel very little resistance and the bar will go all the way into the grease gun body. The rubber cup and spring assembly is still in place and pushing on the grease. You just detached the bar from the cup. This is a nice feature, because the bar in not sticking out of the bottom of the gun. 6. Start pumping the pistol. I think by leaving the top pistol end a bit loose on the gun body, you allow air to escape and can send grease up through the hose. Once you feel a little resistance to the pistol pump, tighten that end completely. Hand tighten only. Use a paper towel if it slips too much. . Zerk couplers. As this gun runs at 7500psi, you need to be sure that any couplers you attach to the grease gun can handle it and hold a seal. I had an old lincoln lubrication 5883 slotted right angle 90 degree coupler which has a rating of 1000psi, but i think it's much lower than that. After a few uses, it's probably more like half the rating. The zerk on my mower must have a rating higher than that, because the coupler leaked grease out the sides without any of it going into the fitting. I think some zerks have a stubborn ball valve and need more than 500psi to make a good seal. Just guessing. Maybe someone with knowledge on this can help us out. . Other than the terrible written instructions shipped with the unit, this gun is 5-star. My dad is a retired journeyman auto mechanic and when i told him i bought a lincoln grease gun he said, "that's a good brand. ". . Update: after i wrote this up, i found a good "how to install a cartridge" video. Http://www. Machinerylubrication. Com/view/29551/load-grease-gun

Lincoln-lubrication-1134-pistol-grease-(auto-accessory) set picture

- W. KristenRight out of the box the coupler leaked at the zerk. Had to put it in a vise to loosen it to adjust and as tight as it will go - it still leaks. Had to take one off an old blue point grease gun i use for my tractor (great gun! i understand snap-on guns are blue points - anyone confirm? , wish i had known before i ordered this. ) and now it works beautifully. Two stars off for the hassle and bad coupler. Looks like they cut a corner. Oh and as far as i know snap-on guns are made in the usa. . Nothing wrong with this gun and it seems like a quality tool, better than a cheap gun by far. But i expected the coupler to work right out of the box. One star off. Don't think that's unreasonable. If it lasts for decades like my blue point that was my grandfathers and is still going strong i'll update. I'm sure it will with the "new" coupler. At least it should!

My preference was to purchase a grease gun made in the usa. Nowhere could i find one so i was resigned to buy one which i was sure would be made in china. To my surprise the gun was made in india and is a high quality item. The hose was made in germany which was another surprise. I needed to lubricate the spindles on my mower so i obtained a grease cartridge and tried to load it into the gun by following the manual provided by lincoln. I appreciate the fact that lincoln furnished a manual but i would have been pleased if it had been written clearly enough to be understood. I simply could not load the cartridge using the lincoln manual and decided to look for other instructions. Luckily i found a youtube clip titled lincoln grease gun tutorial which solved my loading problem and offered other helpful hints. All went well after viewing that clip. . This is a fine grease gun and works as expected. Other than a confusing user guide i have no complaints.

H. Bullock, Niedersachsen

LINCOLN LUBRICATION 1134 HEAVY DUTY PISTOL GRIP GREASE GUN WHIP HOSE RIGID PIPE Advantages
Brand :    drake off road
Size :    1
Weight :    2.80 pounds
  • Accessible check valve allows easy cleaning without gun disassembly
  • Rugged cast pump head for strength and durability
  • Tools extra-heavy follower spring insures positive priming and uninterrupted pumping action
  • Precision fit and hardened plunger prevents lubricant bypass, resists scoring for longer life
  • Tools jam-proof toggle mechanism prevents binding or accidental bending of plunger
Price :    $35.72 (was $38.95)
Model :    LNC 1134
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (drake off road product review) for Lincoln Lubrication 1134 Heavy Duty Pistol Grip Grease Gun Whip Hose Rigid Pipe available as-of ( Dec 2018 )

Carbyne Grease Injector Needle, 1-1/2 inch Long, 18 Gauge, Stainless Steel

Carbyne tools' grease injection needle is built to last. 18 gauge stainless steel x 1-1/2 inch. Perfect to lubricate in tight spaces such as universal joints and sealed bearings. Features a standard grease fitting & protective cover. Safe working pressure: 3, 000 psi. Limited lifetime warranty.

Carbyne Grease Injector Needle, 1-1/2 inch Long, 18 Gauge, Stainless SteelCarbyne-Grease-Injector-Needle-Stainless

CARBYNE GREASE INJECTOR NEEDLE, 1-1/2 INCH LONG, 18 GAUGE, STAINLESS STEEL Reviews
Brand :    carbyne
Weight :    0.4 pounds
  • Carbyne tools' grease injection needle is built to last.
  • Perfect to lubricate in tight spaces such as universal joints and sealed bearings.
  • Safe working pressure: 3, 000 psi.
  • 18 gauge stainless steel x 1-1/2 inch.
  • Features a standard grease fitting & protective cover.
Price :    $7.44 (was $9.99)
Model :    3101511
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (carbyne product review) for Carbyne Grease Injector Needle, 1-1/2 inch Long, 18 Gauge, Stainless Steel available as-of ( Dec 2018 )

Lumax LX-1416 Silver 18G 1-1/2 Long Stainless Steel Grease Injector Needle Cap

The grease injector needle is for use on hand-operated grease guns only. It is ideal for lubricating in very tight places like sealed bearings and universal joints. This 18 gauge x 1-1/2 inches long stainless steel needle is equipped with standard grease fitting and snaps into any grease coupler. It comes with protective plastic cover and is great for hard-to-reach grease points on cars, vans, 4 wheel drives, trucks, rv's, farm and industrial equipment and more.

Lumax LX-1416 Silver 18G 1-1/2 Long Stainless Steel Grease Injector Needle CapLumax-LX-1416-Silver-Stainless-Injector

LUMAX LX-1416 SILVER 18G 1-1/2 LONG STAINLESS STEEL GREASE INJECTOR NEEDLE CAP Overview
Brand :    lumax
Color :    Silver
Weight :    0.5 pounds
Model :    LX-1416
Quantity :    1
Order click here :    normally ships in 24 hours
  • For use with most hand-operated grease guns
  • Comes with protective plastic cover
  • Knurled grip to help connect/disconnect from coupler
  • 18 gauge x 1-1/2 inches long stainless steel needle
  • For lubricating very tight places-sealed bearings
Price :    $2.79 (was $7.71)
Automotive Parts And Accessories :    Best Auto Accessory (lumax product review) for Lumax LX-1416 Silver 18G 1-1/2 Long Stainless Steel Grease Injector Needle Cap available as-of ( Dec 2018 )

Genuine Chrysler Accessories 5083150AA Multi-Purpose Grease - 14.5 oz. Cartridge

General purpose grease for lubricating clutch torque shaft bearings, clutch release bearing sleeves, clutch release forks, brake assemblies, wheel bearings and more. Nlgi-2 certified.

Genuine Chrysler Accessories 5083150AA Multi-Purpose Grease - 14.5 oz. CartridgeGenuine-Chrysler-Accessories-5083150AA-Multi-Purpose

GENUINE CHRYSLER ACCESSORIES 5083150AA MULTI-PURPOSE GREASE - 14.5 OZ. CARTRIDGE Summary
Price :    $23.43 (was $23.96)
  • General purpose grease
  • Genuine oem chrysler fluid
  • Use for lubricating clutch torque shaft bearings
  • Excellent lubricant
  • Specially formulated for lubricating clutch and brake assemblies
Brand :    genuine chrysler
Size :    14.5 Ounce
Model :    5083150AA
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (genuine chrysler product review) for Genuine Chrysler Accessories 5083150AA Multi-Purpose Grease - 14.5 oz. Cartridge available as-of ( Dec 2018 )

Plews 05-037 Grease Injector Needle

This grease injector needle lubricates in very tight places such as universal joints and sealed bearings. It is a stainless steel 18 gauge x 1-1/2 inch long needle that is equipped with standard grease fitting and protective plastic holder. For hand operated grease guns only.

Plews 05-037 Grease Injector NeedlePlews-05-037-Grease-Injector-Needle

PLEWS 05-037 GREASE INJECTOR NEEDLE Features
Brand :    plews
Weight :    0.32 pounds
Model :    05-037
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (plews product review) for Plews 05-037 Grease Injector Needle available as-of ( Dec 2018 )
Price :    $2.90 (was $3.79)
  • The product is manufactured in china
  • Easy to use
  • The product is grease injector needle
  • Stainless steel 18 gauge x 1-1/2 inch long needle
  • Lubricates in very tight places such as universal joints and sealed bearings

lincoln lubrication 5803 grease needle nozzle Price : 7.92, was : 9.44 as 2018-10-20
USUKDEFRESITJPCNCAGlobal
United States
Great Britain
German
France
Spain
Italy
Japan
China
Canada
World Wide
Lincoln Lubrication 5803 Grease Needle Nozzle (Loln Electric) Reviewed by on jerdus.com

Top lincoln lubrication 5803 grease needle nozzle (loln electric) Content

The F.A.Q. for lincoln lubrication 5803 grease needle nozzle

If you own a jeep/dodge with a dana 30 front axle, you know it is pretty much impossible to get to the front driveshaft u joint zerk fitting. Ordered this because i was doing ball joints and could not lube lower joint with a regular fitting. Got this in, put it on my grease gun, done in 10 minutes! this fitting is same type i used in military on airplanes. Auto z and ad auto fitting have a tip that is angled to much to work. This one is just right!

A number of questions have been asked here.

Q&A

(0) Question: Will this screw on a mini-grease gun to be used for bike maintenance?


(1) Question: Will this needle grease the moog u joint with zerk fitting on end of bearing cap.


(2) Question: Is this small enough to fit between cover and outer wheel. bearing to grease the bearing?


(3) Question: Will this let me sneak past the ball joint stud and boot to add some more grease? there is no zerk fitting


(4) Question: Will this needle nozzle fit on a standard grease gun? and, will it work on a flush grease fitting?


(5) Question: What is the "decimal . 000" diameter of the actual needle?


(6) Question: Does it have a zerk fitting that the end of the gun clicks into so i wouldn't have to unscrew the fitting on the gun?


(7) Question: Will this fit: lincoln lubrication 1133 that i purchased here on online store as well? current whip hose screws on, this would do the same?


(8) Question: Will thid work on my whirl-a-way power scruber



(note) Question: where/how to get Loln Electric (manufacturer's brand) accessories & similiar Loln Electric's products

Answer:

Click the marked text to copy link to Clipboard

This is a great tool. I was dubious it would work with regular zerk fittings but it worked perfectly. . Only thing- you really need two people, one to hold the needle with pressure into the fitting (since it doesn't lock on) and the other to work the gun.


Automotive 18148651, Fuel Transfer & Lubrication 13870751, Garage & Shop 10770751, Tools & Equipment 14960751Top Lincoln Lubrication 5803 Grease Needle Nozzle (Loln Electric) FAQ Content

Best lincoln lubrication 5803 grease needle nozzle (loln electric) in review

Never thought i would use this but sure enough i did for zerk fittings that were seized and i had to go up and under the boot to grease the ball joint. . This is a very sturdy item and i can't foresee it breaking with normal use. It's a thick tip with a small pin hole. . Glad i read the reviews and ended up purchasing this.

S. Guest, Kansas

You might like to see Chain Wax - 13.5 Oz. Maxima Chain Wax Is A Superior Power Spray Lubricant Designed For All Chain Care Needs. It's Special Para-film Formula Creates A Waxy Film Similar To Cosmoline, Offering Long Term -Maxima 74920 Chain Wax - 13.5 Oz. Aerosol
  1. Quality: It's Special Para-film Formula Creates A Waxy Film Similar To Cosmoline, Offering Long Term Protection Especially In Water And High Humidity Environments.
  2. Quality: Maxima Chain Wax Is Formulated With Heavy Duty, Anti-wear, And Extreme Pressure Additives That Provide Superior Lubrication For All Chains, Cables, And Sprockets.
Buy Maxima 74920 Chain Wax - 13.5 Oz. Aerosol (Auto Accessory) 74920 Maxima 74920 Chain Wax - 13.5 Oz. Aerosol (Auto
Or you might like to consider Battery terminal wiper arm this is a dual-purpose puller. easily removes stuck battery terminals. tighten knurled cone to force jaws under the cable clamp. turn center screw to lift clamp off terminal. also -lisle 54150 battery terminal wiper arm puller
  • Highlight: Easily Removes Stuck Battery Terminals.
  • Highlight: Tighten Knurled Cone To Force Jaws Under The Cable Clamp.
Buy Lisle 54150 Battery Terminal Wiper Arm Puller (Auto Accessory) 54150 Lisle 54150 Battery Terminal Wiper Arm Puller (Auto

X. Anonymous, Virginia says

Works like it should. I can put grease into tiny areas with ease.

A. Medina, Hartlepool

Leaks a little bit, but still works fine. Used with grease gun for some hard to reach places (nearly hidden zerk fittings of 4wd front driveshaft on toyota truck) with great success. When i break it i will buy another.

F. Peggy, Sunderland says

I needed this for the newer style u-joint grease fittings (not zerks). There is no other efficient way to grease these new fittings without this injector. The picture doesn't show it , but the tip has a coating on it almost like bed lining to seal against the ball seat. I haven't tried it on conventional zerk fittings, but i don't see why it wouldn't work, especially on hard to reach/limited access fittings. I'm going to buy another one as backup since i can't find one locally.

I. Eva, Lancashire

I have a zerk fitting that is in a difficult spot. Be sides that the standard coupler wouldn't fit, i couldn't hit the zerk fitting head on either. I have to go in at a slight angle, which made this job a real challenge. I bought two other types of adapters from local auto parts stores without any success. One was the rubber tip, and the other was 4" needle adapter. Both failed. Rubber tip couldn't hold the pressure, leak grease around the rubber edge. The 4" needle adapter was too long and the tip angle was too wide. Bought lincoln needle nozzle next and it was perfect for this. The tip was narrow, sharper angle, and the right length. It fits on my grease pump without any problems. I was really happy that i got the ball joint greased up. I would buy this again.

C. Perez, Herefordshire says

Attached to my grease gun and worked perfect to pump grease into some cv boots.

W. Adrienne, Nova Scotia

Yes, it will work, with limits, on conventional zerk grease fittings. If the grease fitting is empty or low on grease, you can force the ball back into the fitting with the blunt tip of this needle nozzle. However, as the fitting starts to fill with grease, and the pressure increase, it is impossible to make a super tight fitting with this nozzle, and grease will start to leak back out of the fitting. However, for those fittings that are impossible to reach with consumer type grease gun couplers, this nozzle is better than nothing. For toyota sequoia owners - my 2001 sequoia limited 4wd, while going from 0 to 55, there was a rumbling noise between 30 to 45 mph. After greasing the 2 fittings on the front drive shaft, and 3 fittings on the rear drive shaft (using this nozzle ) the noise has disappeared. This was the first time these fittings were greased in 18 years. This nozzle is made of soft metal and will bend if dropped, or if too much pressure is used at an odd angle. Some grease is better than no grease.

X. Joanna, British Columbia says

I have several of these tips. They work great on standard zerks and inverted cone. Great for use where it is hard to reach a standard zerk. Just put the needle tip in the ball bearing hole with a little pressure and grease flows right in.

E. Paula, New York

I had a jerk on my jd 2025r that the manufacturer really screwed up on, i bought 6 different grease fitting, and none of them could be put on the jerk(jd), finally found this one and it worked like a charm, bought two just in case, best needle nozzle in the world, and for the price amazing.

I. Emma, Doncaster says

I purchased this nozzle especially for the flat type grease fittings on some driveshaft universal joints. Not only does it function well but there is no leakage around the tip at all when pumping the grease. I also used it for access to some conventional grease fittings that were just not accessable with the normal zerk fitting head on your grease gun.

H. Diana, Buckinghamshire

Exactly what is needed to grease those moog u-joints with the flat grease ports.

L. Cunningham, Idaho says

I use this in conjunction with the lumax lx-1120 black heavy duty deluxe lever grease gun to lubricate the front drive shaft fitting on my ram 2500 4x4. No modification needed.

A. Josephine, Provence-Alpes-Cote dAzur

Used this needle nozzle on the end of a hand-operated grease gun to lubricate bored holes for specialized lag-type screws. The application was to sister new floor joists that were sistered into 100+ year old cracked or cut chestnut floor joists. This needle nozzle allowed my to inject a squirt of *low-viscosity* lubrication grease into modest diameter pilot holes to make the tightening of the specialized lag screws very easy with no sticking or extra-large pilot holes.



Leave a Reply

You must be logged in to post a comment.


Top lincoln lubrication grease needle Review Content

Related Products

Product Image Gallery

Top-lincoln-lubrication-5803-grease-needle-5438002sr6xe-Content