Mictuning 150w Single Light Brackets (mic 5dp150) 3260

Review for single row cree led light bar

Price was $59.99. I'm now running two of these on two different jeeps and i am very impressed. The combo design does an excellent job of lighting up the ditch and making sure you get better light on the corners and straight ahead and oem lights could ever dream of doing. . For a single row led bar it also does a good job of giving you decent deep light for increase stopping in the fact you'll see obstacles a bit earlier than before. The front lens, mounting hardware and in general the quality was better than you should get for the price. I was impressed at the performance and quality of the light. . Overall for the money a great product and would purchase again.

-M. Medina

31 150w Single Row Cree Led Light Bar 2 Sets Brackets Off Road Suv Atv Jeep – 2 Yr Thank You Very Much For Your Business Us! Enjoy Your Shopping! 🙂 Description: – Good Quality 2 Years Warranty – 5w High Intensity Cree Leds Saving More Energy, Efficient And So -Mictuning 31 150w Single Row Cree Led Light Bar 2 Sets Brackets Off Road Suv Atv Jeep – 2 Yr Warranty

  1. Quality: 5w Each High Intensity True Cree Leds, Combo Flood/spot Beam Pattern (20 Degree Flood, 10 Degree Spot); Lumens: 14800 Lm; Lifespan: 30, 000 Hours Above Life Time.
  2. Quality: 2 Styles Mounting Brackets, Mini Style Appearance Of Fine Craft And Easy To Install.

Price Cut Mictuning 150w Single Light Brackets (Auto Part) Mic 5dp150

Buy Now

Preface

I took the advice of a previous reviewer and weather sealed this light with clear silicon before installing it on my jeep. I removed the three screws on each side and sealed around the edges of the end caps. There is a rubber gasket to help seal it, but i'm not sure how strong it is. I also sealed along the outside of the lens and the frame. There a bit of a gap and the silicon fills it very easily. I did all of this just to be sure the light lasts for a while. You get what you pay for and i think adding a bit more weather protection will help with its longevity. I don't have much experience caulking things, but it's not hard. . To eliminate the annoying whistle you get with a light bar traveling at higher speeds i added three strips of door trim guard. This worked perfectly. I used rigid industries brackets to mount the bar. I had to buy some extra hardware to make this work. I use a m6 - 30mm hex screw to adjust for length. The screws that came with the bar were to long. I also added washers and a locking bolt to each side. This wasn't much of an added cost. . Over all i like the look of this light bar. It's super bright. I've taken it through car washes and have driven it in the rain and had no issues. Best single row cree led light bar | Mictuning-Auto Part Review as-of ( Sep 2018 ) Quality MICTUNING 31" 150W Single Row Cree LED Light Bar (2 Sets Brackets) for Off Road SUV ATV Jeep - 2 Yr Warranty Mictuning single row sr-mini series slim light bars equipped hybrid optics, more powerful more efficient. 5w each high intensity true cree leds, combo flood/spot beam pattern (20 degree flood, 10 degree spot); lumens: 14800 lm; lifespan: 30, 000 hours above life time. 2 styles mounting brackets, mini style appearance of fine craft and easy to install. Rubber seal waterproof rating ip68, wide operating voltage range 10-32v can fit different types of 4x4, off road, jeep, suv, rzr, atv, truck, car and boat. Mictuning is a leading led lighting brand registered in us, use usa cree led chips, with 30, 000 hrs above long life span and sturdy built, 2 years warranty time, mictuning is your best vehicle lighting choice! .

Mictuning 31 150w single row cree led light bar 2 sets brackets for off road suv atv jeep - 2 yr warranty Review (mic 5dp150)

I love it, might not be as bright as some of the double rows but appearance wise it looks so much better then a dorky double row. The brackets i did not need but i did use them to make a pivot so i can adjust the light from the driver seat of my jeep. Got some handles and put them over the larger brackets. It now has great function and looks awesome. -K. Jarvis

Mictuning 150w Single Light Brackets

  • Order: Automotive
  • Brand: MICTUNING
  • ClothingSize: 31" 150W
  • Color: SR1-150W-COMBO
  • EAN: 0608613083276
  • Product Dimensions:
    Height:1.60 inches
    Length:33.30 inches
    Weight:2.10 pounds
    Width:3.10 inches
  • Manufacturer: MicTuning
  • Warranty-Part: Parts
  • Model: MIC-5DP150
  • MPN: MIC-5DP150
  • Total: 1
  • Quantity: 1
  • Part/Serial Number: MIC-5DP150
  • Sub-Type: Automotive Parts And Accessories
  • Category: AUTO PART
  • ReleaseDate: 2017-06-21
  • Size: 31" 150W
  • UPC: 608613083276

31 150w single row cree led light bar 2 sets brackets off road suv atv jeep - 2 yr Automotive Parts And Accessories, Thank you very much for your business with us! enjoy your shopping! :) description: - good quality with 2 years warranty - 5w high intensity cree leds saving more energy, efficient and so on - 2 styles mounting brackets and wide operating voltage range can fit different types of off road, jeep, suv, atv, truck, car, boat - waterproof and anti-corrosion: it can in the rain or harsh environments features: . condition: 100% brand new . 150w (30pcs x 5w high intensity cree leds) . dimensions: 33 3/10 by 1 3/5 by 3 1/10 inches (without the mounting bracket: 31 1/6 inch) . beam: spot 10 degree & flood 20 degree combo . luminous flux: 14800 lm . operating voltage: 10-30 dc . waterproof rate: ip 68 . color temperature: 6000k (white) . lens: pc glass (scratch-proof) . mounting bracket: alu firm bracket . lifespan: 50000 hours . weight: 2. 1 lbs package included: 1 x 150w single row led light bar 1 x set mounting brackets (including 2 styles) Mictuning 150w Single Light Brackets (MIC-5DP150-Mictuning).

Mictuning 150w Single Light Brackets Automotive Parts And Accessories

single row cree led light bar MICTUNING 31" 150W Single Row Cree LED Light Bar (2 Sets Brackets) for Off Road SUV ATV Jeep - 2 Yr Warranty (Switch to Mobile/Desktop Version)

Great light for the price, length is a lil off but still a great product

Mictuning 31 150w Single Row Cree Led Light Bar 2 Sets Brackets Off Road Suv Atv Jeep - 2 Yr Warranty
Click to see NoticeMictuning 150w Single Light Brackets (mic 5dp150)"So far so good. I live in arizona so i might not be the right guy to discuss the water behind the lens guy but it has rained pretty hard a few times since i've installed and had no issues. I'm sure through a cold damp winter it might be different. For those complaining about lights being out make sure you have the proper gauge wire for power and ground and ensure you have a good ground. During testing with thin wire i have a block of lights go out but once installed properly i haven't had an issue. They work great and light up the night."


MICTUNING MIC-5DP50 2X SR-Mini Series 11' 50W Single Row CREE LED Light Bar COMBO Spot Flood 5000lm 500m Visibility

Mictuning led light bars - the bright choice, for safe and fun mictuning is a leading led lighting brand registered in us, providing cost-effective led light bars and auto parts with heartfelt after-sales service, we offer 2 year warranty for genuine mictuning light bar, mictuning is your best off road lighting choice! this mictuning sr-mini series 11' 50w single row cree led light bar made of durable corrosion-resistant die-casting aluminum housing and toughened glass lens, with 10pcs*5w high intensity leds, spot 10 degree & flood 20 degree combo beam, saving more energy, efficient and so on. Operating voltage is 10-30v dc, 5000 lumens , more than 50000 hours life span. It is a perfect aftermarket led light for off road. Upgrade the original light on your vehicle and worry-free about the darkness, rain and fog weather. Features: waterproof, dustproof, shockproof waterproof at ip67 and anti-corrosion, it can run in the rain, fog weather or other harsh environments. 2 set mounting brackets very easy installation. It come with 2 set stainless steel mouting brackets for 2 styles installation. Superior visibility with 10pcs 5w high intensity leds and 6000k pure white light, makes it superior visibility and stand out among other vehicles. Better heat dissipation the back aluminum fan shap design makes it dissipate heat more faster and effective. Attention: some lights may not be packed in the printed box since our packing is being upgraded. Both of them are certified products as long as labled genuine mictuning trademar, please use with rest assured. What you'll get: 2 yr mictuning warranty and lifetime friendly customer service. Package included:2 x 50w combo light bar, 4 set mounting brackets and screws.

MICTUNING MIC-5DP50 2X SR-Mini Series 11' 50W Single Row CREE LED Light Bar COMBO Spot Flood 5000lm 500m VisibilityMICTUNING-MIC-5DP50-SR-Mini-Single-Visibility

MICTUNING MIC-5DP50 2X SR-MINI SERIES 11' 50W SINGLE ROW CREE LED LIGHT BAR COMBO SPOT FLOOD 5000LM 500M VISIBILITY Review
Price :    $38.41 (was $49.91)
  • Mictuning sr-mini series 50w formance 500 meters visibility, 10 pcs 5w each high intensity high quality leds super bright, combo spot 8 degree and flood 20 degree. attention: some lights may not be packed in the printed box since our packing is being upgraded. both of them are certified products as long as labled genuine mictuning trademark, please use with rest assured.
  • Mictuning is a leading led lighting brand registered in us, use usa high quality led chips, with 50000 hrs. above long life span and sturdy built, 2 years warranty time, mictuning is your best vehicle lighting choice!
  • Ip67 waterproof and anti-corrosion: it can in the rain or harsh environments
  • Wide operating voltage range 10-30v, can fit different types of off road, jeep, suv, atv, utv, truck, car, boat
  • 2 styles mounting brackets, mini style appearance of fine craft and easy to install brackets
Brand :    mictuning
Color :    Black
Size :    2Pcs 50W combo light
Weight :    4.20 pounds
Model :    MIC-5DP50
Quantity :    2
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (mictuning product review) for MICTUNING MIC-5DP50 2X SR-Mini Series 11' 50W Single Row CREE LED Light Bar COMBO Spot Flood 5000lm 500m Visibility available as-of ( Sep 2018 )

AUXMART Hidden Grille Mounting Brackets LED Light Bar Work light Fit 2009-2014 Ford F-150 1 Pair

Product picture indicates there is a bit of an adjustment on the truck end. This is not true, it only has a fixed hole. Not an issue if your light bar is exactly 30". Mine was just a bit longer so i broke out the drill, made my own adjustment. After that, works like a charm. Solid piece. Only minus a star for misleading picture.

Fitment: please verify that these mounting brackets fit your vehicle before you purchase fit ford f-150 pickup 4/2wd 2009-2014 compatible with most 30" single row led light bars color: black material:solid steel construction mounting position:front grille instructions:included package included: a pair of hidden grillle mount brackets for 30" single row led light bars

AUXMART Hidden Grille Mounting Brackets LED Light Bar Work light Fit 2009-2014 Ford F-150 1 PairAUXMART-Hidden-Mounting-Brackets-2009-2014

Auxmart single hidden bracket 2009 2014 (70019302) FAQ.

Very easy to install, it came with directions. -Notice from O. Wimbish, South Gloucestershire

Click to Show auxmart single hidden bracket 2009 2014 (70019302) Details

Installed a 30 inch light bar on my 2013 f-150 ecoboost, it is the size of a 2 row light bar, fits fine, doesn't interfere with intercooler. Good deal, better than drilling holes in grille supports to get this placement

Auxmart-single-hidden-bracket-2009-2014-(70019302) set picture

- T. PerezPerfect fit, saved me a bunch of time installing my light bar! one note though, when mounted to the truck, it had about 31. 5" between the brackets, allowing for the installation easily of a 31" light bar.

AUXMART HIDDEN GRILLE MOUNTING BRACKETS LED LIGHT BAR WORK LIGHT FIT 2009-2014 FORD F-150 1 PAIR Feature
Brand :    auxmart
Weight :    0.59 pounds
  • Install directly behind the grille, firmly holding the light bar
  • Package included: a pair of hidden grillle mount brackets for 30" single row led light bars
  • Fit ford f-150 pickup 4/2wd 2009-2014 compatible with most 30" single row led light bars
  • Black power coated surface, will not rust one-piece bracket with perfect corner to fit your specific light bar
  • With hole design, perfectly match with original mounting points
Price :    $16.99
Model :    70019302
Quantity :    1
Order click here :    normally ships in 24 hours
Home :    Best Home (auxmart product review) for AUXMART Hidden Grille Mounting Brackets LED Light Bar Work light Fit 2009-2014 Ford F-150 1 Pair available as-of ( Sep 2018 )

5 Position 30 - 32 LED Light Bar Mount Polaris RZR XP 1000, 2015+ RZR 900

Product description 5 position led light bar mount for polaris rzr xp 1000, 2015+ rzr 900 "new" product from inner demon motorsports. Our new led light bar mounts easily to the factory visor using the factory hardware. The mounts are ideal for 30 -32" lightbars and have 5 different mounting positions so you can easily position to the bar to your exact fitment. (works with lightbars 30 -32 in width) features: heavy duty 1/8 steel construction precision cnc cut and formed textured black powdercoated finish easy mounting using factory hardware or supplied heavy duty bolts. 5 different mounting options fitment: 2014-2018 polaris rzr xp 1000 and turbo models (2 & 4 seat) 2015-2018 polaris rzr 900 models (2 & 4 seat) led light not included will not work with poly roofs or tip out windshields

5 Position 30 - 32 LED Light Bar Mount Polaris RZR XP 1000, 2015+ RZR 900Position-30-Light-Mount-Polaris

5 POSITION 30 - 32 LED LIGHT BAR MOUNT POLARIS RZR XP 1000, 2015+ RZR 900 Benefits
Brand :    inner demon motorsports
Model :    IDMLED30MT
Quantity :    1
Order click here :    normally ships in 1-2 business days
Automotive Parts And Accessories :    Best Powersports Vehicle Part (inner demon motorsports product review) for 5 Position 30 - 32 LED Light Bar Mount Polaris RZR XP 1000, 2015+ RZR 900 available as-of ( Sep 2018 )

MICTUNING MIC-LSR12 5Pin Laser Rear Lights Rocker Switch On-Off LED Light 20A 12V, Blue

Bought This 6 Months Ago And Just Installed It Last Night. I Connected The Wire From The Switch To The Rear Lights And Turned On The Switch. The Lights Turned On But Were Very Dim. At First I Thought I Must Have Bought Junk Lights. I Rechecked The Grounds And Connections On The Back Of The Switch. As I Touched The Wires On The Back Of The Switch The Lights Suddenly Turned On Very Brightly. All The Wires Were Connected To The Switch Properly And Tightly. As I Continued To Touch Them One By One The Lights Would Flicker And Then Turn Off And Then Come On Brightly. Something Is Apparently Loose Inside The Switch And When It's Touched The Connection Comes And Goes. Not A Very Robust Switch.

Fashion cool illuminated rocker switch mictuning 5 pin rocker switch is a spst (single pole single throw) on-off switch that works like a seesaw, easily turning on or off any lights. Its surface cover is designed to be streamline curved with etched patterns. Built-in led light emits perfect beam to light up the pattern when the switch is powered up, which also allows you to clearly catch sight of it in a dark environment, no more fumbles! it comes with little jumper connectors and single connectors all nicely made with ends on them and a rubber protector on the female ends. The whole switch fits into a standard square cut out same as all the other switches for most 4x4, polaris rzr, off-road, suv, atv, utv, polaris ranger rzr, motorsport, boat, marine, jeep wrangler, etc. Rated at 20amp 12v/dc and 10amp 24v/dc, it is mainly used for controlling the led light fixtures of car, boat and yacht, such as led light bar, headlights, tail lamps, work lights, fog lights, auxiliary lights and so on. Surface size is 2" (50mm) x 1"(25mm). Standard size mounting hole 1. 41"(36mm) x . 86"(22mm). Warranty 1 year quality guarantee for genuine mictuning 5 pin rocker switch and lifetime friendly customer service. Package included : 1x 5 pin rocker switch 1x jumper wire set 1x diagram

MICTUNING MIC-LSR12 5Pin Laser Rear Lights Rocker Switch On-Off LED Light 20A 12V, BlueMICTUNING-MIC-LSR12-Lights-Rocker-Switch

Mictuning mic lsr12 lights rocker switch (MIC-LSR12) FAQ.

Just Installed This Gem On My Golf Cart Tonight The Blue Lights Aren't Very Bright At All But Just Enough To See The Switch At Night And Be Able To Read. I Like That I Can Have The Bottom Words "rear Lights" Lit Up When The Switch Is Off So That I Can See It. Then The Icons Of The Led Lights Light Up When The Switch Is Turned On. It Seem's To Be A Very Good Quality Switch With Clear Labeled Instructions And Little Wire Pigtails/jumpers That Were Perfect For What I Needed! -Notice from B. Theola, Hampshire

Click to Show mictuning mic lsr12 lights rocker switch (mic-lsr12) Details

This Arrived Super Fast (thanks Prime) And Came With Decent Enough Directions. I Do Wish It Came With A Cut Out Template That Would Have Made Me Love It More! A Simple Piece Of Paper That I Don't Have To Guess And Check To Create Would Be Awesome. But It Didn't So I Made One Out Of The Cardboard Packaging Positioned It Where I Wanted It On My Dash And Penciled The Cut Out. Took The Time Cut Out The Dash And Make Sure It Was Level And Centered For The Install. Go In Small Bits Better To Have To Shave Off Then Have An Oversized Hole! The Connections Were Super Easy The Directions Were Great At Detailing What To Do On The Switch End. Not So Much The Battery Hook Up End So Beware You Should Have A Plan Before Diving Into It. After Hooking It Up To The Battery And Throwing In My Own Inline Fuse To The Led Bar I Powered It Up And It Simply Worked. I Love The Blue Light When It Is On Especially Because I Have It Hooked Up To The Battery And Not To The On/off Key. In Short: The Good: Simple Hook Up Works Looks Great Good Directions On The Switch End You Can Get This Switch In Many Flavors! The Bad: None Really Would Have Liked To See It Come With A Cut Out Template

Mictuning-mic-lsr12-lights-rocker-switch-(mic-lsr12) set picture

- X. GuestThese Are Real Nice Looking Switches. And They Seem To Be Well Constructed. I Have Them Mounted In A Plastic Panel On My Kubota Tractor. Since It Didn T Have Any Holes In That Panel I Had To Have Holes Cut Into It. As Soon As I Looked At The Switches I Knew I Was In Trouble. There Is Only About 1/16 On Each Side To Cover The Hole So I Knew It Had To Be Very Accurate So I Took The Switches And Plastic Panel To A Local Machine Shop And Had Them Machine The Holes In The Panel With A Mill. Be Aware Of One Thing! The Measurements They Give For The Opening Hole Is Too Small. The Length Is Too Short And The Switch Wouldn T Fit. They Had To Make The Hole A Little Longer To Make The Switch Fit.

Leds Work Great And The Switch Works Flawlessly. Looks Great In My Truck. It Even Came With The Jumpers And Wire Ends To Hook Up To My Wiring Harness I Previously Installed For The Lights. I Didn't Wire It Straight To My Battery But Rather To My Running Lights So It Would Only Illuminate When My Headlights Are On So As To Save It Potentially Eating At My Battery Power. I Put It In A Switch Box (mictuning 2pcs Rocker Switch Holder Panel Housing Kit Fireproof Abs Plastic Black) I Bought From This Company As Well And It Fit Exactly The Way I Thought It Should. Looks Professional.

K. Joanna, Surrey

MICTUNING MIC-LSR12 5PIN LASER REAR LIGHTS ROCKER SWITCH ON-OFF LED LIGHT 20A 12V, BLUE Features
Price :    $7.49 (was $9.99)
  • Sturdy durability: made of strengthened plastic and well-conductive pins, and all patterns are etched directly onto the switch surface to ensure long lasting durability
  • Wide application: standard 5 pin switch, rated at 20amp/12v and 10amp/24v, available for upgrading most wiring harness to control led light bar, led work lights, fog lamps, headlights, taillights and auxiliary lamps, etc
  • Perfect appearance: built in two premium leds emits cozy beam, penetrating to surface cover that illuminates the patterns, no longer fumble for the switch but clearly see it at the dark
  • Mictuning 5 pin on-off rocker switch is spst designed(single pole single throw) switch, it come along with a set of jumper wires, simple to install, can easily turn on/off the lights
  • What you'll get: 1 year quality guarantee for genuine mictuning 5 pin rocker switch and lifetime friendly customer service. package included : 1x 5 pin rocker switch, 1x jumper wires set, 1x diagram
Brand :    mictuning
Color :    Blue
Weight :    0.2 pounds
Model :    MIC-LSR12
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Part (mictuning product review) for MICTUNING MIC-LSR12 5Pin Laser Rear Lights Rocker Switch On-Off LED Light 20A 12V, Blue available as-of ( Sep 2018 )

MicTuning MIC-5DP30, SR-Mini Series 30W Single Row Cree LED Light Bar Combo Spot Flood 2700 lm, 400m Visibility, 8' L

After Installing These On My Truck I Noticed A Lot Of Moisture Building Up Inside The Lens. Two Weeks Later Light Stopped Working Due To Lots Of Water Built Up Inside The Light. I Mounted These Lights To The Rear Bumper On My Truck To See While Putting The Boat In The Water At Night. Lights Were Never Submerged. Would Only Recommend These Lights For Indoor Use.

Mictuning led light bars - the bright choice, for safe and fun mictuning is a leading led lighting brand registered in us, providing cost-effective led light bars and auto parts with heartfelt after-sales service, we offer 2 year warranty for genuine mictuning light bar, mictuning is your best off road lighting choice! this mictuning sr-mini series 8' 30w single row cree led light bar made of durable corrosion-resistant diecasting aluminum housing and toughened glass lens, with 6pcs*5w high intensity leds, spot 10 degree & flood 20 degree combo beam, saving more energy, efficient and so on. Operating voltage is 10-30v dc, 2700 lumens , more than 50000 hours life span. It is a perfect aftermarket led light for off road. Upgrade the original light on your vehicle and worry-free about the darkness, rain and fog weather. Features: waterproof, dustproof, shockproof waterproof at ip67 and anti-corrosion, it can run in the rain, fog weather or other harsh environments. 2 set mounting brackets very easy installation. It come with 2 set stainless steel mouting brackets for 2 styles installation. Superior visibility with 6pcs 5w high intensity leds and 6000k pure white light, makes it superior visibility and stand out among other vehicles. Better heat dissipation the back aluminum fan shap design makes it dissipate heat more faster and effective. Attention: some lights may not be packed in the printed box since our packing is being upgraded. Both of them are certified products as long as labled genuine mictuning trademar, please use with rest assured. What you'll get: 2 yr mictuning warranty and lifetime friendly customer service. Package included:1 x 30w combo light bar, 2 set mounting brackets and screws.

MicTuning MIC-5DP30, SR-Mini Series 30W Single Row Cree LED Light Bar Combo Spot Flood 2700 lm, 400m Visibility, 8' LMicTuning-MIC-5DP30-SR-Mini-Single-Visibility

Mictuning mic 5dp30 sr mini single visibility (MIC-5DP30) FAQ.

Super Bright Well Worth The Money Just Buy It -Notice from R. Sandra, Newfoundland and Labrador

Click to Show mictuning mic 5dp30 sr mini single visibility (mic-5dp30) Details

This Is One I Repeat One Light. I Think I Assumed It Was A Pair By The Picture. Anyhow Good Little Lights And Very Bright.

Mictuning-mic-5dp30-sr-mini-single-visibility-(mic-5dp30) set picture

- P. WilliamsLike Several Others Have Noted Condensation Inside Of The Lense After First Time Getting Wet. Not Waterproof.

Bought This For A Back Up Light Booster For My Ram Power Wagon. Mounted Under The Rear Bumper With The Low Profile Mounts And Wired Into The Reverse Lights. Lots Of Light Off This Little Guy. If I Had It To Do Again I Would Have Went With A Full Flood This Spot/flood Combo Lights Up My Neighbors Driveway When I Back Out Of Mine. The Only Thing I Recommend Is To Caulk The Lense Prior To Install To Boost The Water Resistance. Another Fine Light From Mic Tuning. I Own Three Of Their Light Bars And Have Been Satisfied With The Performance.

C. Elizabeth, New South Wales

MICTUNING MIC-5DP30, SR-MINI SERIES 30W SINGLE ROW CREE LED LIGHT BAR COMBO SPOT FLOOD 2700 LM, 400M VISIBILITY, 8' L Pros
Brand :    mictuning
Color :    Combo
Size :    8" - 30W cree
Weight :    1.10 pounds
  • Mictuning sr-mini series performance 400 meters visibility, 5w each high intensity high quality
  • Mictuning is a leading led lighting brand registered in us, use usa high quality led chips
  • Wide operating voltage range 10-30v, can fit different types of off road, jeep, suv, atv, utv, truck
  • 2 styles mounting brackets, mini style appearance of fine craft and easy to install brackets
  • Ip67 waterproof and anti-corrosion: it can in the rain or harsh environments
Price :    $22.96
Model :    MIC-5DP30
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (mictuning product review) for MicTuning MIC-5DP30, SR-Mini Series 30W Single Row Cree LED Light Bar Combo Spot Flood 2700 lm, 400m Visibility, 8' L available as-of ( Sep 2018 )

MICTUNING Blue ROCK LIGHTS Rocker Switch Kit- On/Off Blue LED Light 20A 12V

Fashion cool illuminated rocker switch mictuning 5 pin rocker switch is a spst (single pole single throw) on-off switch that works like a seesaw, easily turning on or off any lights. Its surface cover is designed to be streamline curved with etched patterns. Built-in led light emits perfect beam to light up the pattern when the switch is powered up, which also allows you to clearly catch sight of it in a dark environment, no more fumbles! it comes with little jumper connectors and single connectors all nicely made with ends on them and a rubber protector on the female ends. The whole switch fits into a standard square cut out same as all the other switches for most 4x4, polaris rzr, off-road, suv, atv, utv, polaris ranger rzr, motorsport, boat, marine, jeep wrangler, etc. Rated at 20amp 12v/dc and 10amp 24v/dc, it is mainly used for controlling the led light fixtures of car, boat and yacht, such as led light bar, headlights, tail lamps, work lights, fog lights, auxiliary lights and so on. Surface size is 2" (50mm) x 1"(25mm). Standard size mounting hole 1. 41"(36mm) x . 86"(22mm). Warranty 1 year quality guarantee for genuine mictuning 5 pin rocker switch and lifetime friendly customer service. Package included : 1x 5 pin rocker switch 1x jumper wire set 1x diagram

MICTUNING Blue ROCK LIGHTS Rocker Switch Kit- On/Off Blue LED Light 20A 12VMICTUNING-LIGHTS-Rocker-Switch-Light

MICTUNING BLUE ROCK LIGHTS ROCKER SWITCH KIT- ON/OFF BLUE LED LIGHT 20A 12V (LS083501JL) Review

Mictuning Blue Rock Lights Rocker Switch Kit- On/off Blue Led Light 20a 12v (LS083501JL) reviewImage of Mictuning-blue-rock-lights-rocker-switch-kit--on/off-blue-led-light-20a-12v-(ls083501jl)Mictuning blue rock lights rocker switch kit- on/off blue led light 20a 12v (mictuning) fashion cool illuminated rocker switch mictuning 5 pin rocker switch is a spst (single pole single throw) on-off switch that works like a seesaw, easily turning on or off any lights. auto accessory
  • Quality: Perfect Appearance: Built In Two Premium Leds Emits Cozy Beam, Penetrating To Surface Cover That Illuminates The Patterns, No Longer Fumble For The Switch But Clearly See It At The Dark.
  • Quality: Sturdy Durability: Made Of Strengthened Plastic And Well-conductive Pins, And All Patterns Are Etched Directly Onto The Switch Surface To Ensure Long Lasting Durability.
Price Cut Mictuning Blue Rock Lights Rocker Switch Kit- On/off Blue Led Light 20a 12v (Auto Accessory) Ls083501jl
MICTUNING BLUE ROCK LIGHTS ROCKER SWITCH KIT- ON/OFF BLUE LED LIGHT 20A 12V Benefit
Brand :    mictuning
Color :    Blue
Weight :    0.6 pounds
  • Perfect appearance: built in two premium leds emits cozy beam, penetrating to surface cover that illuminates the patterns, no longer fumble for the switch but clearly see it at the dark
  • Wide application: standard 5 pin switch, rated at 20amp/12v and 10amp/24v, available for upgrading most wiring harness to control led light bar, led work lights, fog lamps, headlights, taillights and auxiliary lamps, etc
  • Sturdy durability: made of strengthened plastic and well-conductive pins, and all patterns are etched directly onto the switch surface to ensure long lasting durability
  • Mictuning 5 pin on-off rocker switch is spst designed(single pole single throw) switch, it come along with a set of jumper wires, simple to install, can easily turn on/off the lights
  • What you'll get: 1 year quality guarantee for genuine mictuning 5 pin rocker switch and lifetime friendly customer service. package included : 1x 5 pin rocker switch, 1x jumper wires set, 1x diagram
Price :    $7.99 (was $9.99)
Model :    LS083501JL
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (mictuning product review) for MICTUNING Blue ROCK LIGHTS Rocker Switch Kit- On/Off Blue LED Light 20A 12V available as-of ( Sep 2018 )

MICTUNING MIC-LSW1 5Pin Laser Lighted Whip Rocker Switch On-Off LED Light 20A 12V, Blue

Was Easy To Install With The Instructions Provided. Order The Light Bar Switch After To Match The Light Whip Rocker.

Fashion cool illuminated rocker switch mictuning 5 pin rocker switch is a spst (single pole single throw) on-off switch that works like a seesaw, easily turning on or off any lights. Its surface cover is designed to be streamline curved with etched patterns. Built-in led light emits perfect beam to light up the pattern when the switch is powered up, which also allows you to clearly catch sight of it in a dark environment, no more fumbles! it comes with little jumper connectors and single connectors all nicely made with ends on them and a rubber protector on the female ends. The whole switch fits into a standard square cut out same as all the other switches for most 4x4, polaris rzr, off-road, suv, atv, utv, polaris ranger rzr, motorsport, boat, marine, jeep wrangler, etc. Rated at 20amp 12v/dc and 10amp 24v/dc, it is mainly used for controlling the led light fixtures of car, boat and yacht, such as led light bar, headlights, tail lamps, work lights, fog lights, auxiliary lights and so on. Surface size is 2" (50mm) x 1"(25mm). Standard size mounting hole 1. 41"(36mm) x . 86"(22mm). Warranty 1 year quality guarantee for genuine mictuning 5 pin rocker switch and lifetime friendly customer service. Package included : 1x 5 pin rocker switch 1x jumper wire set 1x diagram

MICTUNING MIC-LSW1 5Pin Laser Lighted Whip Rocker Switch On-Off LED Light 20A 12V, BlueMICTUNING-MIC-LSW1-Lighted-Rocker-Switch

Mictuning mic lsw1 lighted rocker switch (MIC-LSW1) FAQ.

Mictuning Got It To My House Early And It Worked As Advertised. It Came With Detailed Instructions O How To Wire It And It Matches The Oem Switches. Its Perfect. -Notice from K. Wayt, Tennessee

Click to Show mictuning mic lsw1 lighted rocker switch (mic-lsw1) Details

Very Good Product Easy To Install And Hook Up.

Mictuning-mic-lsw1-lighted-rocker-switch-(mic-lsw1) set picture

- U. JuneWorks But Dont Try To Pull The Wires Off To Quickly. I Had One Pull The Connector Right Out

I Received The Switch And It Worked Fine At First. After One Time Of Riding The Switch Became Loose And Now Does Not Click On Anymore.

D. Wimbish, Victoria

MICTUNING MIC-LSW1 5PIN LASER LIGHTED WHIP ROCKER SWITCH ON-OFF LED LIGHT 20A 12V, BLUE Feature
Brand :    mictuning
Color :    Blue
Weight :    0.2 pounds
Model :    MIC-LSW1
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Part (mictuning product review) for MICTUNING MIC-LSW1 5Pin Laser Lighted Whip Rocker Switch On-Off LED Light 20A 12V, Blue available as-of ( Sep 2018 )
Price :    $9.99
  • Mictuning 5 pin on-off rocker switch is spst designed(single pole single throw) switch, it come along with a set of jumper wires, simple to install, can easily turn on/off the lights
  • Sturdy durability: made of strengthened plastic and well-conductive pins, and all patterns are etched directly onto the switch surface to ensure long lasting durability
  • Perfect appearance: built in two premium leds emits cozy beam, penetrating to surface cover that illuminates the patterns, no longer fumble for the switch but clearly see it at the dark
  • Wide application: standard 5 pin switch, rated at 20amp/12v and 10amp/24v, available for upgrading most wiring harness to control led light bar, led work lights, fog lamps, headlights, taillights and auxiliary lamps, etc
  • What you'll get: 1 year quality guarantee for genuine mictuning 5 pin rocker switch and lifetime friendly customer service. package included : 1x 5 pin rocker switch, 1x jumper wires set, 1x diagram

MICTUNING MIC-LSB1 Laser LED Light Bar Rocker Switch ON-OFF LED Light 20A 12V, 5pin, Blue

I Bought A Couple Of These Switches For The Light Bars In My Truck. They're Awesome! The Bright Led Lights Give A Great Glow In My Cab And I've Had A Dozen Compliments. Wiring Is Easy And Comes With Instructions And Everything You Need. You Will Need To Purchase Additional Wire Depending On How Far Away Your Power Source And Lights Are From The Switches But Mine Installation Was A Breeze. It Took Me About Two Hours To Install These Into My Truck But I'm Very Particular About Appearances In My Vehicle And Measured Everything Out To Perfection. You Don't Need To Be An Electrician To Install These Mictuning Get's You All Set Up And Lays Everything Out In A Very Simple Way. I'm Very Impressed With The Quality And Appearance Of These Switches.

Fashion cool illuminated rocker switch mictuning 5 pin rocker switch is a spst (single pole single throw) on-off switch that works like a seesaw, easily turning on or off any lights. Its surface cover is designed to be streamline curved with etched patterns. Built-in led light emits perfect beam to light up the pattern when the switch is powered up, which also allows you to clearly catch sight of it in a dark environment, no more fumbles! it comes with little jumper connectors and single connectors all nicely made with ends on them and a rubber protector on the female ends. The whole switch fits into a standard square cut out same as all the other switches for most 4x4, polaris rzr, off-road, suv, atv, utv, polaris ranger rzr, motorsport, boat, marine, jeep wrangler, etc. Rated at 20amp 12v/dc and 10amp 24v/dc, it is mainly used for controlling the led light fixtures of car, boat and yacht, such as led light bar, headlights, tail lamps, work lights, fog lights, auxiliary lights and so on. Surface size is 2" (50mm) x 1"(25mm). Standard size mounting hole 1. 41"(36mm) x . 86"(22mm). Warranty 1 year quality guarantee for genuine mictuning 5 pin rocker switch and lifetime friendly customer service. Caution:we recommend professional installation, pls let professional installer to install the switch by following the wiring diagram included; if let the wire short circuit, it would caught a wire, we suggest that wrap all exposed wire with electrical tape to avoid a short circuit and test it after all wire hooked well. Package included : 1x 5 pin rocker switch 1x jumper wire set 1x diagram

MICTUNING MIC-LSB1 Laser LED Light Bar Rocker Switch ON-OFF LED Light 20A 12V, 5pin, BlueMICTUNING-MIC-LSB1-Laser-Rocker-Switch

Mictuning Laser Led Light Bar Rocker Switch On-off Led Light 20a 12v, 5pin, Blue (MIC-LSB1) FAQ.

I Bought This Switch For You Guessed It An Led Light Bar. I Really Like 12 Volt Wiring Projects So I Was Excited To Wire Up An Led Light Bar For My John Deere Tractor. The Switch Arrived With A Basic Wiring Diagram And Some Electrical Crimp Connectors. I Often Worry About Ordering Parts I Think Are From China Because The Rocker Cutout Size Sometimes Is Way Off In Size. This Switch Fit Right In The Stock John Deere Slot And Was A Breeze To Wire Up. Turning The Switch On And Off Feels Good And There Is Very Little Play Or Wobble In The Switch Itself. I Also Like How It Has A Very Light Glow When The Switch Is Off Which Makes It Simple To Find When Working In The Dark On My Dash. I Would Absolutely Buy Another Switch From Mictuning. I Just Wish They Had Some More On/off/on 3 Way Switch Opens For Some Other Projects I Have In Mind. -Notice from O. Theresa, Buckinghamshire

Click to Show mictuning laser led light bar rocker switch on-off led light 20a 12v, 5pin, blue (mic-lsb1) Details

I Used This Switch When I Installed A Light Bar On My Polaris Ranger 900 Xp. I Worked Perfectly For Me In This Application. The Switch Fit Perfectly In The Existing Blank In The Dash. The Switch Feels Nice And Solid And Has A Positive Lock When Going Back An Forth. There Are Two Nice Touches That Mictuning Provides With This Switch. It Comes With A Diagram That Clearly Labels The Connectors On The Back Side Of The Switch. I Used This Switch To Replace The Round Rocker Switch That Was Included With The Wiring Harness I Purchased For The Light Bar. This Diagram Made This Change As Simple As Possible. Mictuning Also Includes Two Sets Of Jumpers For The Hot And Grounds For The Lights On The Switch. It Took Me Longer To Pull The Blank Plug Out Of The Dash Than It Did To Wire This Switch Up And Get It In Place. I Will Use These Switches For Any Other Projects I Have.

Mictuning-laser-led-light-bar-rocker-switch-on-off-led-light-20a-12v,-5pin,-blue-(mic-lsb1) set picture

- J. MaryWhat Is There To Say. This Is My Second Switch That I Have Installed In My Rzr And Both Work Perfect Fits The In Dash Cutout Lighted When On And Off So It Is Easy To See In The Dark 20 Amp Switch So It Can Handle The Load Without A Relay Custom Logos Blue Light Matches That Other Dash Lights

Bought This To Install A Led Bar On My Garden Tractor Yes I Said Garden Tractor! I Do A Lot Of Plowing In The Neighborhood With My Tractor And Needed This For The Late Nights Or Early Mornings When I Am Making A Ruckus And Waking Up Neighbors. All To Their Benefit Of Course. Anyways This Arrived Super Fast (thanks Prime) And Came With Decent Enough Directions. I Do Wish It Came With A Cut Out Template That Would Have Made Me Love It More! A Simple Piece Of Paper That I Don't Have To Guess And Check To Create Would Be Awesome. But It Didn't So I Made One Out Of The Cardboard Packaging Positioned It Where I Wanted It On My Dash And Penciled The Cut Out. Took The Time Cut Out The Dash And Make Sure It Was Level And Centered For The Install. Go In Small Bits Better To Have To Shave Off Then Have An Oversized Hole! The Connections Were Super Easy The Directions Were Great At Detailing What To Do On The Switch End. Not So Much The Battery Hook Up End So Beware You Should Have A Plan Before Diving Into It. After Hooking It Up To The Battery And Throwing In My Own Inline Fuse To The Led Bar I Powered It Up And It Simply Worked. I Love The Blue Light When It Is On Especially Because I Have It Hooked Up To The Battery And Not To The On/off Key. In Short: The Good: Simple Hook Up Works Looks Great Good Directions On The Switch End You Can Get This Switch In Many Flavors! The Bad: None Really Would Have Liked To See It Come With A Cut Out Template

L. Paige, Brighton and Hove

MICTUNING MIC-LSB1 LASER LED LIGHT BAR ROCKER SWITCH ON-OFF LED LIGHT 20A 12V, 5PIN, BLUE Benefit
Price :    $9.99
  • Sturdy durability: made of strengthened plastic and well-conductive pins, and all patterns are etched directly onto the switch surface to ensure long lasting durability
  • Mictuning 5 pin on-off rocker switch is spst designed(single pole single throw) switch, it come along with a set of jumper wires, simple to install, can easily turn on/off the lights
  • Perfect appearance: built in two premium leds emits cozy beam, penetrating to surface cover that illuminates the patterns, no longer fumble for the switch but clearly see it at the dark
  • Wide application: standard 5 pin switch, rated at 20amp/12v and 10amp/24v, available for upgrading most wiring harness to control led light bar, led work lights, fog lamps, headlights, taillights and auxiliary lamps, etc
  • What you'll get: 1 year quality guarantee for genuine mictuning 5 pin rocker switch and lifetime friendly customer service. package included : 1x 5 pin rocker switch, 1x jumper wires set, 1x diagram
Brand :    mictuning
Size :    5 Pin Rocker Switch
Weight :    0.3 pounds
Model :    MIC-LSB1
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (mictuning product review) for MICTUNING MIC-LSB1 Laser LED Light Bar Rocker Switch ON-OFF LED Light 20A 12V, 5pin, Blue available as-of ( Sep 2018 )

MICTUNING HD 300w LED Light Bar Wiring Harness Fuse 40 Amp Relay ON-OFF Rocker Switch Blue 1Lead

Mictuning heavy duty 1 lead wiring harness is designed and made specifically for high output light bars which has substantially higher amperage draw than its smaller counterparts. It is a perfect accessory for off road vehicles, working vehicles and any automobile that could use a relay to power specific equipment. The mictuning wiring harness is up to 10 feet and with 1 lead can hook with 1 heavy duty off road led light bar above 180w, up to 300 watt load capacity. It is universal fit for any 7" 10" 12" 20" 30" 40" 50" light bars. Great construction quality wiring material - ul approved. 5 pin on/off rocker switch - can easily turn on/off the lights. Inline blade fuse & 40a relay - multiple safety protection. Universal fit - compatible with all automobiles, boats and devices equipped with a 10-30v power source. Quick & easy install 1. Connect the red+ wire from the fuse to battery +; connect the black wire from the relay to the battery -; 2. Connect the white+; black- wire from the relay to light bar(red/black correspond to the wire of lights bar) ; 3. Turn on on/off button of switch to test the lights bar. Cautions:we recommend professional installation, pls let professinal installer to wire the harness kit; if let the wire short circuit, the harness would melt and even caught a fire, we suggest that wrap all exposed wire with electrical tape to avoid a short circuit; pls make sure your light within power 300w, or it would got melt as well. What you'll get: 1 yr mictuning warranty and lifetime friendly customer service. Package included:1 x wiring harness with 5pin rocker switch, 1 x diagram.

MICTUNING HD 300w LED Light Bar Wiring Harness Fuse 40 Amp Relay ON-OFF Rocker Switch Blue 1LeadMICTUNING-Wiring-Harness-Rocker-Switch

MICTUNING HD 300W LED LIGHT BAR WIRING HARNESS FUSE 40 AMP RELAY ON-OFF ROCKER SWITCH BLUE 1LEAD Pros
Brand :    mictuning
Color :    Black
Size :    1 Lead
Weight :    1.00 pounds
  • Details makes perfect: adopt flexible strand copper wire, up to 300 watt load capacity. it is universal fit for any 7" 10" 12" 20" 30" 40" 50" light bars that is within 300w
  • Great construction: 40a power relay and inline blade fuse for multiple safety protection. it is 1 lead that with one lights output connection, it can hook with 1 heavy duty off road led light bar above 180w
  • Cautions:we recommend professional installation, pls let professinal installer to wire the harness kit; if let the wire short circuit, the harness would melt and even caught a fire, we suggest that wrap all exposed wire with electrical tape to avoid a short circuit; pls make sure your light within power 300w, or it would got melt as well.
  • 10ft extendable wiring harness:up to 10ft of wiring that is plenty of length to put it where you want.
  • Mictuning heavy duty 1 lead wiring harness with on/off rocker switch and easy to install. our packing is being upgraded, so you may receive the wiring harness in the old packing. both of them are genuine products, please used rest-assured
Price :    $16.99 (was $29.99)
Model :    H408011
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (mictuning product review) for MICTUNING HD 300w LED Light Bar Wiring Harness Fuse 40 Amp Relay ON-OFF Rocker Switch Blue 1Lead available as-of ( Sep 2018 )

MICTUNING MIC-B1002 LED Light Bar Wiring Harness, Fuse 40A Relay On-off Waterproof Switch

I used this harness to add led headlights to my troybilt mustang pivot mower (zero-turn with steering wheel model) figuring that for $10 it would be easier deal with the excess wiring than running all of my own. The kit is well-made and a bargain for the price on online store. I took off one star for the starter toggle and lack of directions. It was easy to drill 3/4" hole and install the starter-toggle, but it did require disconnect of the three wires which were installed red, white, black. Once all was assembled and lights would not turn on, i had to disconnect and try again. Web-search sometimes showed red in center and sometimes white, so i tried red in center and still got no lights. I reversed black & white (white toward "off" and black toward "on") and finally got it working.

Mictuning wiring harness for off road led lights is a perfect accessory for off road vehicles, working vehicles and any automobile that could use a relay to power specific equipment. This wiring harness is up to 10 feet and with 2 leads can hook up 2 light fixtures, it is universal fit for any 7" 10" 12" 20" 30" 40" light bars, espcially good for light bar within 180w. For light bar above 180w, we recommend you choose our mictuning heavy duty(hd) wiring harness for better job. Great construction quality wiring material - ul approved. Illuminated on/off toggle switch - can easily turn on/off the lights. Inline blade fuse & 40a relay - multiple safety protection. Universal fit - compatible with all automobiles, boats and devices equipped with a 10-30v power source. Quick & easy install 1. Connect the red+ wire from the fuse to battery +; connect the black wire from the relay to the battery -; 2. Connect the white+; black- wire from the relay to light bar(red/black correspond to the wire of lights bar) ; 3. Connect the red+/black- wire of the switch to battery or any place of your car system to get power for the switch; 4. Turn on on/off button of switch to test the lights bar. What you'll get: 1 yr mictuning warranty and lifetime friendly customer service. Package included:1 x wiring harness full wiring kit, 1 x diagram.

MICTUNING MIC-B1002 LED Light Bar Wiring Harness, Fuse 40A Relay On-off Waterproof SwitchMICTUNING-MIC-B1002-Wiring-Harness-Waterproof

Mictuning mic b1002 wiring harness waterproof (MIC-B1002) FAQ.

I just installed this kit because the factory wiring/switch for the fog lights in my truck is junk. Not a big surprise since i also recently rewired both headlights due to cheap wiring/connectors. Sadly the wiring for the fog lights was ran up into the frame where i cant get at it to diagnose or repair the defect (without tearing my truck apart). When it arrived i was really pleased with the quality of the kit. Especially for the price. The connectors for the lamps are really nice and having a nice switch that lit up was a major selling point on this. The instructions are useless but if you have any idea what you are doing it wont matter. It does fail to mention that you need to drill a 3/4 hole for the switch. I had to chop the power and ground connections off and add ring terminals for the sake of a clean install. But it turned out perfect and works as needed. -Notice from B. Allen, Montana

Click to Show mictuning mic b1002 wiring harness waterproof (mic-b1002) Details

Everything was basic plug and play. Installed on my 2006 polaris sportsman 700. I have a homestead with many animals that require attention at all hours. This harness along with the auxbeam 4" 18w cree led lights work very well. Attached everything to the battery, drilled out a 3/4" hole to insert the switch and then the only hurdle was snaking wires. Very satisfied.

Mictuning-mic-b1002-wiring-harness-waterproof-(mic-b1002) set picture

- T. CarrieUsed these harnesses to wire multiple led lights onto a jeep. There is a lot of extra wire that needs to be accounted for but it gives you flexibility depending on the application. I also replaced the switches to give a uniform appearance in my dash with other lights switches.

The quality is adequate. However, directions are a little misleading. I would not recommended connecting the switch power to the battery as diagrammed in the instructions. Instead, splice it into an acc/ignition on power source.

G. Neva, Dorset

MICTUNING MIC-B1002 LED LIGHT BAR WIRING HARNESS, FUSE 40A RELAY ON-OFF WATERPROOF SWITCH Spotlight
Price :    $9.99 (was $15.99)
  • Mictuning mic-b1002 wiring harness kit with waterproof red on/off toggle switch and easy to install.
  • Great construction:40a power relay and inline blade fuse for multiple safety protection. with 2 lights output connections, it can hook with 2 led work light or 2 small watt led light bar and any else off road leds.
  • 10ft extendable wiring harness:up to 10ft of wiring that is plenty of length to put it where you want.
  • Details makes perfect:adopt flexible strand copper wire, up to 180 watt load capacity. it is universal fit for any 7" 10" 12" 20" 30" 40" light bars that is within 180w.
  • Cautions:we recommend professional installation, pls let professinal installer to wire the harness kit; if let the wire short circuit, the harness would melt and even caught a fire, we suggest that wrap all exposed wire with electrical tape to avoid a short circuit; pls make sure your light within power 180w, or it would got melt as well.
Brand :    mictuning
Color :    Black
Size :    Wiring Harness Kit(max.180W)
Weight :    0.50 pounds
Model :    MIC-B1002
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Part (mictuning product review) for MICTUNING MIC-B1002 LED Light Bar Wiring Harness, Fuse 40A Relay On-off Waterproof Switch available as-of ( Sep 2018 )

mictuning 31 150w single row cree led light bar 2 sets brackets for off road suv atv jeep - 2 yr warranty Price : 59.99, was : 152.9 as 2018-08-01
USUKDEFRESITJPCNCAGlobal
United States
Great Britain
German
France
Spain
Italy
Japan
China
Canada
World Wide
Mictuning 150w Single Light Brackets (mic 5dp150) Reviewed by on jerdus.com

Top mictuning 150w single light brackets (mic 5dp150) Content

The F.A.Q. for mictuning 31 150w single row cree led light bar 2 sets brackets for off road suv atv jeep - 2 yr warranty

I've had this bar installed for about 10 months now. Happy to report so far, so good. Gives plenty of light for my purpose, and i bought this one specifically for it's low profile. Unlike the more expensive bar my friend bought which almost immediately collected water inside (even in az), this one is still good. . It would be 5 start if it weren't for the fact that:. - it comes with only 1. 5ft of wire. At least give us a few feet so we can get it in the cab before we have to put a connector or try to make a watertight splice. . - the bolts sticking out the sides started to rust almost immediately. Rather unfortunate to have this shiny new light bar already rusting.

A number of questions have been asked here.

Q&A

(0) Question: has anyone measured true current consumption on this? is this really 30 watts?


(1) Question: is this a 50" light bar or 52"? it says 50" but the dimensions are 52.2?


(2) Question: will this fit my 2008 ford f-150 fx2?


(3) Question: how many amps does this draw?


(4) Question: how it works the warranty police?


(5) Question: how many amps do these draw?


(6) Question: i have a 89 jeep cherokee what size light do i need for the top of my windshield?


(7) Question: what bracket do i need for a 08 jk jeep



(note) Question: where/how to get Mictuning (manufacturer's brand) accessories & similiar Mictuning's products

Answer:

Click the marked text to copy link to Clipboard

Nice bright light for single row ! like the mounting opposition gives you more choices and more places to put it on truck or off road toys. Would buy again and recommend it to all looking for a clean thin light .


Accent & Off Road Lighting 15363751, Automotive 18148651, Light Bars 13303751, Lights & Lighting Accessories 12363751Top Mictuning 150w Single Light Brackets (mic 5dp150) FAQ Content

Best mictuning 150w single light brackets (mic 5dp150) in review

I like the low profile of the single row of lights. The price was right and looks great. Lower profile to see over, than the original two row light bar i originally bought.

G. Michele, New Jersey

You might like to see 1-gauge 800a Heavy Duty Jumper Battery Cables 25 Ft Booster Jump Start - 25' Allows You To Boost Battery Behind A Energizer Professional Series Heavy Duty For All Vehicle Types Plus Full Size Trucks, Vans And Suvs. Red/black Pvc-coated Insulated Clamps For Easy Identification. Tangle-free Cables -Energizer 1-gauge 800a Heavy Duty Jumper Battery Cables 25 Ft Booster Jump Start - 25' Allows You To Boost Battery Behind A Vehicle
  1. Spotlight: Booster Cable Comes With A Travel Bag - Ideal For Use With Full Size Cars And Cargo Vans, Mid-size Pickup Truck And Freight Hauling Vehicles.
  2. Spotlight: Copper Clad Aluminum Tangle Free Cables Remains Flexible Even At -40 C.
Half Price Energizer 1 Gauge Jumper Battery Booster (Auto Accessory) Enb125 Energizer 1 Gauge Jumper Battery Booster (fba enb
Or you might like to consider Cws 402 16 Mr. Super Suds Car Wash Soap Shampoo 16 Maintaining Your Vehicle S Protective Wax Or Sealant Layer Is Important. Wax And Sealant Protect Your Car From Uv Rays, Water Spots, And Contamination. Mr. Pink Works To Maintain Your -Chemical Guys Cws 402 16 Mr. Pink Super Suds Car Wash Soap Shampoo 16 Oz
  1. Quality: Excellent For Two-bucket Wash Or Foam Gun.
  2. Quality: Ph Neutral For A Gentle Wash.
Deals Chemical Guys Cws 402 16 Mr. Pink Super Suds Car Wash Soap Shampoo 16 Oz (Auto Accessory) Cws 402 16 Chemical Guys Cws 402 16 Mr. Pink Super Suds Car Wash Soap Shampoo 16 Oz (Auto

R. Alberta, Westminster says

Extremely bright. Sealed with silicone prior to install to be on the safe side.

F. Guest, Lorraine

This this puts out a lot of light. Good pattern as well. The combination of floods and spots works really well. If you never put it side by side with a $1000 bar, you will never know you don't have one. Of course, you didn't pay anywhere near that for this one. The name brand bars are brighter and have better reach and more throw, but dollar for dollar, you would be hard pressed to beat this bar. So far they have held up very well. I am very pleased with this purchase.

J. Anonymous, Nevada says

This light bar is insane bright and insane powerful, so powerful that it blew my electrical system and i was forced to disconnect it.

K. Mable, Coventry

Great 50" light bar puts out a lot of bright light looks great also it was easy to install i did it my self just put the top down & you can do it all by your self or you will need another person it was worth the money you just need to buy a wiring harness i got a mictuning heavy duty single lead wiring harness here on online store it was packaged up great and the shipping was fast.

I. Sandra, Utah says

This is a great light with a lot of out put. It would've been better to actually have a glass lense, but for the price it's unbeatable. I had to make new holes in the bracket to make it sit lower then intended, looks great!

B. Cassella, Lambeth

Amazing light for the money! installed under the roof rack and worth every penny. Great job mictung!

X. Theresa, Mississippi says

Loving it. It throws more light than my high beam headlights and fills out more in every direction as well. I've gone off-roading a few times through streams and mudholes as well as a few heavy rain storms. No moisture issues so far. Still looking good. Came with 2 pairs of mounting brackets, short or long, but neither was quite right for where i wanted to mount it. I ended up drilling new holes part way up the long brackets and everything looks good now. Deducted one star because the light made a whistling noise at speeds over about 45mph. It was resolved by putting a strip of that c-channel door edge guard along one of the fins on the back of the light. Seems to disrupt the air enough to stop the whistling. I had this light on for about 45 minutes while parked one night to set up camp and afterwards it didn't feel warm to touch at all so i'm not worried about it's cooling. I do think one of the big name brands would be brighter for this size but it's not worth paying 4x the price to me.

P. Fabian, Connecticut

Perfect. Replaced 4 hids lights and i got just as much range and no warm up time and no ballast to babysit and burn out. I still have hids on the bumper though. Small bars just cant do what i need for medium range.

L. Widmer, Virginia says

I was very impressed with the big power in a little package. It was very easy to install with the harness that online store suggestion for $10. I use this for my car as the headlamps are not bright enough for me at least driving on a lot of back roads. Good buy for the money.

A. Aldana, Australian Capital Territory

Good and bright. I used the optional 12 foot wiring harness which may be overkill but made installation a lot quicker.

F. Anonymous, Rutland says

Light bar is awesome. Can't believe this is only $100. Would have given it 5 stars but the mounting bolt poked through the box and was bent on delivery. I tried to make it work, but half the bolt broke of. I was able to salvage the other half though. But seeing how this was brand new i ended up ordering a replacement. Will update when replacement arrives.

V. Weber, Nordrhein-Westfalen

If you're throwing this on your truck/suv because everyone else is as well and it's more for looks, i believe you'll be fine. If you're offroading with it, or live somewhere that receives quite a lot of inclimate weather, you have one of two choices. . 1) put in a little extra work to seal it with silicone. It says ip67, but lets be realistic. It's an inexpensive version of a piece. Of equipment that costs 2-3 times as much. There are shortcuts made. 10-20min worth of work, and you'll get your money's worth out of it. Some people complain about condensation, and the normal response is "you get what you pay for". Don't be that person that ends up in that situation. . 2) spend the money on a name brand one that is known for quality at the premium price. . I give it 4 stars because the overall build quality for a product that is 1/2 to 1/3rd the price of a name brand is good. It needs a little work, but about $1. 50 in silicone and a little bit of time and you're golden. I have 2 rigid bars, and i like them but to be honest i don't feel they're worth the premium price. The price for this with the little extra work (something i can do while sitting in front of the tv), and they're pretty good. The combination flood/spot is actually actually a more usable beam than the 2 6" sr-series spots (one on each side). So it was a nice addition, and allowed me to relocate one to the rear. If you do it right, you do it once and you should get a decent amount life out of them.



Leave a Reply

You must be logged in to post a comment.


Top single row cree led light bar Review Content

Related Products

Product Image Gallery

Top-mictuning-150w-single-light-brackets-32600oc7tswi-Content