Mictuning wiring harness rocker switch (H608011) 1001

Review for mictuning wiring harness rocker switch

Price was $18.99. Great quality

-P. Sheila

Mictuning wiring harness rocker switch Auto Part H608011

  1. Advantages: DETAILS MAKES PERFECT: adopt 14 Gauge flexible strand copper wire,up to 300 watt load capacity.It is universal fit for any 7″ 10″ 12″ 20″ 30″ 40″ 50″ light bars that is within 300w.
  2. Advantages: MICTUNING HEAVY DUTY 2 lead Wiring Harness with on/off rocker switch and easy to install.

Mictuning-wiring-harness-rocker-switch: Mictuning Auto Part Mictuning Heavy Duty 2 Lead Wiring Harness Is Designed And Made Specifically For High Output

Buy Now

  1. Content
  2. More Alternative
  3. Related

MICTUNING HEAVY DUTY 2 Lead Wiring Harness With On/off Rocker Switch And Easy To Install. DETAILS MAKES PERFECT: Adopt 14 Gauge Flexible Strand Copper Wire,up To 300 Watt Load Capacity.It Is Universal Fit For Any 7" 10" 12" 20" 30" 40" 50" Light Bars That Is Within 300w. GREAT CONSTRUCTION: 40A Power Relay & Inline Blade Fuse For Multiple Safety Protection.It Is 2 Lead That With 2 Lights Output Connection,it Can Hook With 1 Heavy Duty Off Road Led Light Bar Above 180w And Two Small Light Bar. 12FT Extendable Wiring Harness:more Than 12ft Of Wiring From Relay To Lights That Is Plenty Of Length To Put It Where You Want, NOT LIKE OTHERS' ONLY 10FT. CAUTIONs:We Recommend Professional Installation,pls Let Professinal Installer To Wire The Harness Kit; If Let The Wire Short Circuit,the Harness Would Melt And Even Caught A Fire,We Suggest That Wrap All Exposed Wire With Electrical Tape To Avoid A Short Circuit; Pls Make Sure Your Light Within Power 300W, Or It Would Got Melt As Well. Advantages MICTUNING HD 300w LED Light Bar Wiring Harness Fuse 40 Amp Relay ON-OFF Rocker Switch Blue(2Lead 12ft 14AWG).

MICTUNING HD 300w LED Light Bar Wiring Harness Fuse 40 Amp Relay ON-OFF Rocker Switch Blue(2Lead 12ft 14AWG) Overview (H608011)

Mictuning Hd 300w Led Light Bar Wiring Harness Fuse 40 Amp Relay On-off Rocker Switch Blue(2lead 12ft 14awg)

  • Brand : MicTuning
  • ClothingSize : 2 Lead(HD 12ft)
  • Color : Black
  • EAN : 0608613099017
  • Manufacturer : MICTUNING
  • Warranty : Parts
  • Model : H608011
  • MPN : H608011
  • Quantity : 1
  • Part Number : H608011
  • Group : Automotive Parts And Accessories
  • Category : AUTO PART
  • Size : Heavy Duty(2 Lead 12ft)
  • Title : MICTUNING HD 300w LED Light Bar Wiring Harness Fuse 40 Amp Relay ON-OFF Rocker Switch Blue(2Lead 12ft 14AWG)
  • UPC : 608613099017
  • Warranty : 1 Year Warranty For Genuine MICTUNING Brand Wiring Harness Kit, Replacement Of Whole Harness Kit Or Accessories Upon Proof Of Defective Of Item Itself.

Mictuning Hd 300w Led Light Bar Wiring Harness Fuse 40 Amp Relay On-off Rocker Switch Blue(2lead 12ft 14awg) H608011 Low-Priced Automotive Parts And Accessories 608613099017 Mictuning, Mictuning wiring harness rocker switch 0608613099017. mictuning heavy duty 2 lead wiring harness is designed and made specifically for high output light bars which has substantially higher amperage draw than its smaller counterparts. it is a perfect accessory for off road vehicles working vehicles and any automobile that could use a relay to power specific equipment. . . the mictuning wiring harness is more than 12 feet and with 2 lead can hook with 1 heavy duty off road led light bar above 180w or 2 small light bar up to 300 watt load capacity. it is universal fit for any 7" 10" 12" 20" 30" 40" 50" light bars. . . great construction. quality wiring material - ul approved. . illuminated on/off toggle switch - can easily turn on/off the lights. . inline blade fuse & 40a relay - multiple safety protection. . universal fit - compatible with all automobiles boats and devices equipped with a 10-30v power source. . . quick & easy install. 1. connect the red+ wire from the fuse to battery +; connect the black wire from the relay to the battery -; . 2. connect the white+;black- wire from the relay to light bar(red/black correspond to the wire of lights bar) ;. 3. turn on on/off button of switch to test the lights bar. . cautions:we recommend professional installation pls let professinal installer to wire the harness kit; if let the wire short circuit the harness would melt and even caught a fire we suggest that wrap all exposed wire with electrical tape to avoid a short circuit; pls make sure your light within power 300w or it would got melt as well. . . what you'll get:. 1 yr mictuning warranty and lifetime friendly customer service. package included:1 x wiring harness with rocker switch 1 x diagram. Mictuning wiring harness rocker switch Auto Part H608011.

Mictuning H608011: MICTUNING HD 300w LED Light Bar Wiring Harness Fuse 40 Amp Relay ON-OFF Rocker Switch Blue(2Lead 12ft 14AWG)

Item as described

mictuning-wiring-harness-rocker-switch
Click to see NoticeMictuning wiring harness rocker switch (H608011)"I Ordered This Wiring Harness After Trying A Different Brand Which Shorted Out And Nearly Caught On Fire. The Switch And Connectors Are Good And Heavy Enough To Handle The Load. I Would Recommend This Wiring Harness Just Make Sure You Check All Of The Connections"

Mictuning-wiring-harness-rocker-switchMICTUNING HD 300w LED Light Bar Wiring Harness Fuse 40 Amp Relay ON-OFF Rocker Switch Blue(2Lead 12ft 14AWG) (Switch to Mobile/Desktop Version)

MICTUNING Rocker Switch Holder Panel Housing Kit Fireproof ABS Plastic Black

This Rokcer Switch Housing Is Made Of High Quality Fireproof Abs+pc Fire-protection Rating V-0. The Precise Design Guarantees That Your Rocker Switchs Can Be Safely And Quickly Installed On The Dashboard Of Vehicle Or Boat. This Strong Bracket Gives You Unlimited Options To Mount Many Extra Switches You Can Use It To Extend Your Switch Pannel To Meet Your Needs.

MICTUNING Rocker Switch Holder Panel Housing Kit Fireproof ABS Plastic BlackMICTUNING-Rocker-Housing-Fireproof-Plastic

MICTUNING ROCKER SWITCH HOLDER PANEL HOUSING KIT FIREPROOF ABS PLASTIC BLACK Features
Brand :    mictuning
Color :    Panel 1PCS
Size :    1Pcs Switch Panel
Model :    MH001
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Part (mictuning) reviews for MICTUNING Rocker Switch Holder Panel Housing Kit Fireproof ABS Plastic Black available as-of ( May 2019 )
Inner dimension: 1.50 x 1.06 x 0.87 inches Color: Black Plastic ABSMICTUNING provide you high quality ABS + PC fireproof V-0 rocker switch housing, can be used on various vehicles and boats, SUV, ATV, UTV, MarineWarranty: 2 yeards limited warrantyThis strong bracket gives you unlimited options to mount many extra switches to your vehicle or boatQty: 1 pcs rocker switch panel housing

LED Light Bar Nilight 8PCS 4 Inch 18W LED Bar 1260lm Spot Led Off Road Lights Led Driving Fog Lights Jeep Lighting LED Work Light ,2 Years Warranty

Specification: Led Power: 18 W Voltage: 9-32 V Led: 6pcs3w Beam: Spot Beam Led Color Temperature: 6000k Working Life: 30000 Hours Working Temperature: -40 85 Waterproof Rate: Ip68 Material: 6063 Aluminum Profile Stainless Steel Bracket Pc Lens

LED Light Bar Nilight 8PCS 4 Inch 18W LED Bar 1260lm Spot Led Off Road Lights Led Driving Fog Lights Jeep Lighting LED Work Light ,2 Years WarrantyNilight-1260lm-Driving-Lighting-Warranty

Nilight 1260lm driving lighting warranty (NI 06A-18W) Review

The Mounts Will Loosen Over Time And They Will Wiggle However For The Price They Are Great Little Lights. Extremely Bright. Mounts And Hardware Are Weak But That Can Be Fixed By Going To Hardware Store.

Review from G. Guest, York

Review from I. Palmer, Saarland

First Off For The Price You Can't Beat Em But If Your Expecting Some Insanely Bright Light You Need To Adjust Your Expectations. I Ordered 8 Of These And All Have Different Light Output One Is Extremely Dim. The Brackets Are Very Flimsy I Could Rip The Light Out Of Its Bracket When Installed. They Work In The Sense That You Turn On The Power And Light Comes Out They Are Good For Driving Lights Or Work Scene Lights For The Immediate Perimeter Of The Vehicle But Not Going To Light A Whole Trail.

Image of Nilight-1260lm-driving-lighting-warranty-(ni-06a-18w)

Easy To Install And Very Bright I Got Two Of The Four Mounted Up Because The Postal Service Lost My Brackets To Mount The Other Two Pods On My Roof Rack. But That's A Totally Unrelated Issue On A Separate Order.

Testing I Purchased These Lights To Add To The Rear Of My Truck A 2013 F350. After Reading Reviews That These Units Allow Water To Infiltrate The Unit I Decided To Test Them Before Installation. As You Can See In The Photos The Lights Were Completely Submerged In A Bucket Of Water For About An Hour To See If Any Moisture Would Get Into The Housing. After Removing The Unit From The Water It Was Dried Using Compressed Air. I Then Disassembled The Light And Found No Water In The Housing At All. It Is Very Well Sealed With Rubber Gaskets At All Assembly Surfaces. Performance These Lights Were Purchased With The Intent Of Giving Me More Light While Backing Up To Hook Up Trailers. They Are Also Very Bright And Useful For Work When The Days Run Long. I'll Try To Get Some Pictures Of Them In Action And Update This Later. Gripes The Mounting Bracket Is Thin And Feels Like Aluminum. Don't Get Rough With It Or Will Break Or Bend. Would I Buy These Again Absolutely. I Purchased 8 Of These As I Plan On Installing Them On At Least Three More Trucks. And May Purchase More For Work Lights To Mount In My Toolboxes.

H. Erin, Lambeth

LED LIGHT BAR NILIGHT 8PCS 4 INCH 18W LED BAR 1260LM SPOT LED OFF ROAD LIGHTS LED DRIVING FOG LIGHTS JEEP LIGHTING LED WORK LIGHT ,2 YEARS WARRANTY Review
Brand :    nilight
Size :    8pcs 18w Spot light
Weight :    8.50 pounds
Model :    NI 06A-18W
Quantity :    1
Order click here :    normally ships in 2 to 3 days
Automotive Parts And Accessories :    Best Auto Part (nilight) reviews for LED Light Bar Nilight 8PCS 4 Inch 18W LED Bar 1260lm Spot Led Off Road Lights Led Driving Fog Lights Jeep Lighting LED Work Light ,2 Years Warranty available as-of ( May 2019 )
Better heat dissipation: special designed die-cast aluminum alloy heat sinks effectively extend the lifespan of the light bar to over 30,000 hoursWide application: jeeps, 4x4, cars, trucks, motorcycles, SUVs, ATVs, boats, etc. Garden lighting, backyard lighting, back-up light, off road lighting, Construction lighting and so on.Adjustable mounting bracket: with adjustable mounting bracket, the work light can adjust to about 45 degrees, which makes changing direction of light beam easier.Super bright white ray: made of famous high-quality LED chips, the concentrated spot beam is powerful to light up the dark road and make your trip safer.High performance: IP67 waterproof rate, 100% dustproof and waterproof up to 1 meter of water for 30 minutes. The Stainless mounting brackets are rustproof and anticorrosive.

MICTUNING 12ft LED Light Bar Wiring Harness - 40Amp Relay Fuse Laser BLUE ON-OFF Rocker Switch (REAR LIGHTS)

Mictuning Wiring Harness For Off Road Led Lights Is A Perfect Accessory For Off Road Vehicles Working Vehicles And Any Automobile That Could Use A Relay To Power Specific Equipment. This Wiring Harness Is More Than 12 Feet And With 2 Leads Can Hook Up 2 Light Fixturesit Is Universal Fit For Any 7" 10" 12" 20" 30" 40" Light Barsespcially Good For Light Bar Within 180w. For Light Bar Above 180wwe Recommend You Choose Our Mictuning Heavy Duty(hd) Wiring Harness For Better Job. Great Constructionquality Wiring Material - Ul Approved. 5 Pin On/off Rocker Switch - Can Easily Turn On/off The Lights. Inline Blade Fuse & 40a Relay - Multiple Safety Protection. Universal Fit - Compatible With All Automobilesboats And Devices Equipped With A 10-30v Power Source. Quick & Easy Install1. Connect The Red+ Wire From The Fuse To Battery +; Connect The Black Wire From The Relay To The Battery -; 2. Connect The White+;black- Wire From The Relay To Light Bar(red/black Correspond To The Wire Of Lights Bar) ;3. Connect The Red+/black- Wire Of The Switch To Battery Or Any Place Of Your Car System To Get Power For The Switch;4. Turn On On/off Button Of Switch To Test The Lights Bar. Tips:1)if Let The Harness Short Circuit The Wire Would Meltpls Let Professinal Installer To Wire It;2)if You Wire The Harness To A Battery Directlythe Rocker Switch Will Glowing Even When The Vehicle Is Off;if You Don't Want The Switch Always Glowing After You Turned Off Engineyou Can Hook The Harness To A Source On Your Fuse Panel. What You'll Get: 1 Yr Mictuning Warranty And Lifetime Friendly Customer Service. Package Included:1 X Wiring Harness With 5pin Rocker Switch1 X Diagram.

MICTUNING 12ft LED Light Bar Wiring Harness - 40Amp Relay Fuse Laser BLUE ON-OFF Rocker Switch (REAR LIGHTS)MICTUNING-12ft-Light-Wiring-Harness

MICTUNING 12FT LED LIGHT BAR WIRING HARNESS - 40AMP RELAY FUSE LASER BLUE ON-OFF ROCKER SWITCH (REAR LIGHTS) Overview
Brand :    mictuning
Color :    Rear Lights
Model :    101044
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Part (mictuning) reviews for MICTUNING 12ft LED Light Bar Wiring Harness - 40Amp Relay Fuse Laser BLUE ON-OFF Rocker Switch (REAR LIGHTS) available as-of ( May 2019 )
CAUTIONs:We recommend professional installation,pls let professinal installer to wire the harness kit; If let the wire short circuit,the harness would melt and even caught a fire,We suggest that wrap all exposed wire with electrical tape to avoid a short circuit; Pls make sure your light within power 180W, or it would got melt as well.Details Makes Perfect:adopt 16 Gauge flexible strand copper wire,up to 180 watt load capacity.It is universal fit for any 7" 10" 12" 20" 30" 40" light bars that is within 180w.Great Construction:40A Power Relay & Inline Blade Fuse for multiple safety protection.With 2 lights output connections,it can hook with 2 led work light or 2 small watt led light bar and any else off road LEDs.12FT Extendable Wiring Harness:more than 12ft of wiring from relay to lights that is plenty of length to put it where you want, NOT LIKE OTHERS' ONLY 10FT.MICTUNING 03 Series wiring harness kit with 5 pin on/off rocker switch and easy to install.

MICTUNING HD 300w LED Light Bar Wiring Harness 40Amp Relay ON-OFF Without Switch(1Lead 12Feet 14Awg)

Mictuning Heavy Duty 1 Lead Wiring Harness Is Designed And Made Specifically For High Output Light Bars Which Has Substantially Higher Amperage Draw Than Its Smaller Counterparts. It Is A Perfect Accessory For Off Road Vehicles Working Vehicles And Any Automobile That Could Use A Relay To Power Specific Equipment. The Mictuning Wiring Harness Is More Than 12 Feet And With 1 Lead Can Hook With 1 Heavy Duty Off Road Led Light Bar Above 180w Up To 300 Watt Load Capacity. It Is Universal Fit For Any 7" 10" 12" 20" 30" 40" 50" Light Bars. Great Construction Quality Wiring Material - Ul Approved. Ready To Connect Rocker Switch - Easy To Install. Inline Blade Fuse & 40a Relay - Multiple Safety Protection. Universal Fit - Compatible With All Automobilesboats And Devices Equipped With A 10-30v Power Source. Quick & Easy Install 1. Connect The Red+ Wire From The Fuse To Battery +; Connect The Black Wire From The Relay To The Battery -; 2. Connect The White+;black- Wire From The Relay To Light Bar(red/black Correspond To The Wire Of Lights Bar) ; 3. Turn On On/off Button Of Switch To Test The Lights Bar. Cautions:we Recommend Professional Installationpls Let Professinal Installer To Wire The Harness Kit; If Let The Wire Short Circuitthe Harness Would Melt And Even Caught A Firewe Suggest That Wrap All Exposed Wire With Electrical Tape To Avoid A Short Circuit; Pls Make Sure Your Light Within Power 300w Or It Would Got Melt As Well. What You'll Get: 1 Yr Mictuning Warranty And Lifetime Friendly Customer Service. Package Included:1 X Wiring Harness 1 X Diagram.

MICTUNING HD 300w LED Light Bar Wiring Harness 40Amp Relay ON-OFF Without Switch(1Lead 12Feet 14Awg)MICTUNING-Wiring-Harness-Without-Switch

MICTUNING HD 300W LED LIGHT BAR WIRING HARNESS 40AMP RELAY ON-OFF WITHOUT SWITCH(1LEAD 12FEET 14AWG) Summary
Brand :    mictuning
Color :    Black
Model :    H408002
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Part (mictuning) reviews for MICTUNING HD 300w LED Light Bar Wiring Harness 40Amp Relay ON-OFF Without Switch(1Lead 12Feet 14Awg) available as-of ( May 2019 )
DETAILS MAKES PERFECT: adopt 14 Gauge flexible strand copper wire,up to 300 watt load capacity.It is universal fit for any 7" 10" 12" 20" 30" 40" 50" light bars that is within 300w.CAUTIONs:We recommend professional installation,pls let professinal installer to wire the harness kit; If let the wire short circuit,the harness would melt and even caught a fire,We suggest that wrap all exposed wire with electrical tape to avoid a short circuit; Pls make sure your light within power 300W, or it would got melt as well.12FT Extendable Wiring Harness:more than 12ft of wiring from relay to lights that is plenty of length to put it where you want, NOT LIKE OTHERS' ONLY 10FT.MICTUNING HEAVY DUTY 1 lead Wiring Harness without switch and ready to connect rocker switch,easy to install.GREAT CONSTRUCTION: 40A Power Relay & Inline Blade Fuse for multiple safety protection.It is 1 lead that with one lights output connection,it can hook with 1 heavy duty off road led light bar above 180w.

MICTUNING 2PCS Rocker Switch Holder Panel Housing Kit Fireproof ABS Plastic Black

This Rokcer Switch Housing Is Made Of High Quality Fireproof Abs+pc Fire-protection Rating V-0. The Precise Design Guarantees That Your Rocker Switchs Can Be Safely And Quickly Installed On The Dashboard Of Vehicle Or Boat. This Strong Bracket Gives You Unlimited Options To Mount Many Extra Switches You Can Use It To Extend Your Switch Pannel To Meet Your Needs.

MICTUNING 2PCS Rocker Switch Holder Panel Housing Kit Fireproof ABS Plastic BlackMICTUNING-Rocker-Housing-Fireproof-Plastic

MICTUNING 2PCS ROCKER SWITCH HOLDER PANEL HOUSING KIT FIREPROOF ABS PLASTIC BLACK Features
Brand :    mictuning
Color :    Panel 2PCS
Size :    2Pcs Switch Panel
Model :    MH002
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Part (mictuning) reviews for MICTUNING 2PCS Rocker Switch Holder Panel Housing Kit Fireproof ABS Plastic Black available as-of ( May 2019 )
Warranty: 2 years limited warrantyThis strong bracket gives you unlimited options to mount many extra switches to your vehicle or boatInner dimension: 1.50 x 1.06 x 0.87 inches Color: Black Plastic ABSMICTUNING provide you high quality ABS + PC fireproof V-0 rocker switch housing, can be used on various vehicles and boats, SUV, ATV, UTV, MarineQty: 2 pcs rocker switch panel housing

LED Light Bar Nilight 20 Inch 126w LED Work Light Spot Flood Combo Led Bar Off Road Lights Driving Lights Led Fog Light Jeep Lights Boat Lighting ,2 Years Warranty

Specification: Led Power: 126 W (42 X 3w High Intensity Leds) Voltage: 9-30v Dc Waterproof Rate: Ip67 Working Lifespan: Over 30000 Hours Led Color Temperature: 6000k-6500k Working Temperature: -40 85 Degrees Material: 6063 Aluminum Profile Stainless Steel Bracket Pc Lens Beam Combo Pattern. Spot (30 Degrees) And Flood (60 Degrees). Product Features: Suitable Design For Heating Elimination. High Performance Of Waterproofdustproof And Quakeproof. Glass Surface Is Made Of Pc Lens With High Light Transmission. Special Combination Of Spot Beam And Flood Beam Provides Better Lighting Effect. Applications: Indoor And Outdoor Uses Back Up Light Off Road Lighting Truck Trailer Interior And Exterior Lighting Construction Lighting Garden Backyard Lighting Boat Lighting Package Include: 1pc 126w Led Light Bar They Are Aftermarket Parts. Not D. O. T. Approved. Do Not Use If D. O. T. Is Required. For Off Road Use Only. Laws Concerning This Product Vary From State/province To State/province. Your State/province May Prohibit Its Use On Public Roads Or Restrict Its Use To Novelty Show Use Off-road Areas Or Race Facility Areas Only. In Some States/provinces Off-road Uses Are Also Prohibited. The Manufacturer And Retailer Assume No Responsibility For Any Use Or Application Of This Product In Violation Of Any Applicable Law. Before Installing This Product Please Check Your State/provincial And Local/municipal Laws And Regulations.

LED Light Bar Nilight 20 Inch 126w LED Work Light Spot Flood Combo Led Bar Off Road Lights Driving Lights Led Fog Light Jeep Lights Boat Lighting ,2 Years WarrantyNilight-Lights-Driving-Lighting-Warranty

Nilight lights driving lighting warranty (NI06A-126W) Review

This Item Is Not Of Good Quality. It Rained Once And All The Moisture Been Inside Ever Since. I Was 2 Days Late Of My Deadline For Returning This Item. I Would Have Left The Stars Off. But I Had To Choose

Review from E. Alberta, City of London

Review from D. Hayward, Pays de la Loire

I Would Not Recommend Anyone Purchasing This Light Bar. It Is Not Water Proof For One. Recently I've Been Noticing That There Is Moisture Inside Of The Light - Whether It's From It Raining Or Simply Going Through A Car Wash. Also I'm Not Too Sure If It's The Relay Used On The Light Or If It's The Actual Light But It Will Take Several Attempts Of Flicking On My Light Switch Until The Light Finally Comes On - This Is Without Any Prior Use. So It Wouldn't Be From It Becoming Too Hot And It's Not Turning On So It Can Try To Cool Down. I Recommend Saving Your Money And Going Else Where.

Image of Nilight-lights-driving-lighting-warranty-(ni06a-126w)

I Was Really Happy With The Led Bar For The First 2 Days After Installing But On The 3rd Day One Side Of The Led Stop Working. I Was Really Disappointed With This Issue. I Requested A Refund And Will Be Looking At A Different Product.

Lights Are Failing Already. Half Of Them Went Out And The Others Are Flickering. Feels And Looks Like A Good Light Bar But When You Need It To Do What You Bought It For It Fails.

J. Clara, Wandsworth

LED LIGHT BAR NILIGHT 20 INCH 126W LED WORK LIGHT SPOT FLOOD COMBO LED BAR OFF ROAD LIGHTS DRIVING LIGHTS LED FOG LIGHT JEEP LIGHTS BOAT LIGHTING ,2 YEARS WARRANTY Spotlight
Brand :    nilight
Size :    1 PCS 126W Light
Model :    NI06A-126W
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (nilight) reviews for LED Light Bar Nilight 20 Inch 126w LED Work Light Spot Flood Combo Led Bar Off Road Lights Driving Lights Led Fog Light Jeep Lights Boat Lighting ,2 Years Warranty available as-of ( May 2019 )
ADJUSTABLE MOUNTING BRACKET: With adjustable mounting bracket, the work light can adjust to about 45 degrees, which makes changing direction of light beam easier. The lamp can be slid after install the accessory.HIGH PROTECTION PERFORMANCE: IP67 Waterproof Rate, 100% dustproof and waterproof up to 1 meter of water for 30 minutes. The stainless mounting brackets are rustproof and anticorrosive.BETTER HEAT DISSIPATION: High-quality heat conduction silicone gel together with redesigned aluminum alloy housing, providing superior cooling effect for long working lifespan.BRIGHT RAY FOR CLEAR VISIBILITY: The appropriate mix and match of spot beams and flood beams provides a long irradiation distance and broad view.WIDE APPLICATION: The work light can be compatible with almost all Jeeps, 4x4, Trucks, Motorcycles, SUVs, ATVs, Cars, Boats, etc. Many indoor and outdoor uses: Garden Lighting, Backyard Lighting, Back-up Light, Off Road Lighting, Construction Lighting and so on.

MICTUNING MIC-LSR12 5Pin Laser Rear Lights Rocker Switch On-Off LED Light 20A 12V, Blue

Fashion Cool Illuminated Rocker Switch Mictuning 5 Pin Rocker Switch Is A Spst (single Pole Single Throw) On-off Switch That Works Like A Seesaw Easily Turning On Or Off Any Lights. Its Surface Cover Is Designed To Be Streamline Curved With Etched Patterns. Built-in Led Light Emits Perfect Beam To Light Up The Pattern When The Switch Is Powered Up Which Also Allows You To Clearly Catch Sight Of It In A Dark Environment No More Fumbles! It Comes With Little Jumper Connectors And Single Connectors All Nicely Made With Ends On Them And A Rubber Protector On The Female Ends. The Whole Switch Fits Into A Standard Square Cut Out Same As All The Other Switches For Most 4x4 Polaris Rzr Off-road Suv Atv Utv Polaris Ranger Rzr Motorsport Boat Marine Jeep Wrangler Etc. Rated At 20amp 12v/dc And 10amp 24v/dc It Is Mainly Used For Controlling The Led Light Fixtures Of Car Boat And Yacht Such As Led Light Bar Headlights Tail Lamps Work Lights Fog Lights Auxiliary Lights And So On. Surface Size Is 2" (50mm) X 1"(25mm). Standard Size Mounting Hole 1. 41"(36mm) X . 86"(22mm). Warranty 1 Year Quality Guarantee For Genuine Mictuning 5 Pin Rocker Switch And Lifetime Friendly Customer Service. Package Included : 1x 5 Pin Rocker Switch 1x Jumper Wire Set 1x Diagram

MICTUNING MIC-LSR12 5Pin Laser Rear Lights Rocker Switch On-Off LED Light 20A 12V, BlueMICTUNING-MIC-LSR12-Lights-Rocker-Switch

Mictuning mic lsr12 lights rocker switch (MIC-LSR12) Review

Much Better Than Utv Inc Switches. These Come With A Diagram Of Where The Wires Go Utv Inc Just Sends The Switch With Only 4 Pins And No Diagram. The 5 Th Pin On This Switch Allows You To Have A Lighted Switch When The Key Is On.

Review from T. Kellie, Picardie

Review from Z. Palmer, California

Came With Jumper Wires For Switch. Fit And Finish Are Okay. There Is Some Light Bleed When The Headlights Are On And When The Switch Is On. The Leds Inside Are Not Shrouded So Light Escapes On All Sides. It's Okay For What The Price Is. I Might Try Putting Some Black Foam Weatherstripping Behind The Rocker To Prevent Escaping Light.

Image of Mictuning-mic-lsr12-lights-rocker-switch-(mic-lsr12)

The Switch Itself Looks Nice And Fits Into A Standard Square Cut Out Same As All The Other Switches For A Polaris Rzr It Comes With Little Jumper Connectors And Single Connectors All Nicely Made With Ends On Them And A Rubber Protector On The Female Ends Only. These Are All Nice Things But I Do Have To Say I Am Rather Disappointed In The Overall Quality Of The Switch More Specifically The Connector Pins On The Back Were All The Wires Go. They Are Not Attached Well At All!! If You Push A Wire With The Connector End Onto The Connector Pin But Need To Take It Off Be Very Very Careful As They Will Pull Completely Out Of The Switch!!! Luckily I Was Able To Repair The Two Pins That Pulled Out Which Was Two Completely Different Pins On Two Different Switches. I Am Not Impressed At All And I Would Not Purchase These Again.

Just Installed This Gem On My Golf Cart Tonight The Blue Lights Aren't Very Bright At All But Just Enough To See The Switch At Night And Be Able To Read. I Like That I Can Have The Bottom Words "rear Lights" Lit Up When The Switch Is Off So That I Can See It. Then The Icons Of The Led Lights Light Up When The Switch Is Turned On. It Seem's To Be A Very Good Quality Switch With Clear Labeled Instructions And Little Wire Pigtails/jumpers That Were Perfect For What I Needed!

B. Theola, Hampshire

MICTUNING MIC-LSR12 5PIN LASER REAR LIGHTS ROCKER SWITCH ON-OFF LED LIGHT 20A 12V, BLUE Summary
Brand :    mictuning
Color :    ON-OFF 5 Pin
Weight :    0.2 pounds
Model :    MIC-LSR12
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Part (mictuning) reviews for MICTUNING MIC-LSR12 5Pin Laser Rear Lights Rocker Switch On-Off LED Light 20A 12V, Blue available as-of ( May 2019 )
MICTUNING 5 Pin on-off Rocker Switch is SPST designed(Single pole single throw) switch, it come along with a set of jumper wires, simple to install, can easily turn on/off the lightsWIDE APPLICATION: standard 5 Pin switch, rated at 20amp/12v and 10amp/24v, available for upgrading most wiring harness to control Led Light Bar, Led Work Lights, Fog Lamps, Headlights, Taillights and Auxiliary Lamps, etcPERFECT APPEARANCE: built in two premium LEDs emits cozy beam, penetrating to surface cover that illuminates the patterns, no longer fumble for the switch but clearly see it at the darkWHAT YOU'LL GET: 1 YEAR QUALITY GUARANTEE for Genuine MICTUNING 5 Pin Rocker Switch and Lifetime Friendly Customer Service. Package included : 1x 5 Pin Rocker Switch,1x jumper wires set, 1x DiagramSTURDY DURABILITY: made of strengthened plastic and well-conductive pins, and all patterns are etched directly onto the switch surface to ensure long lasting durability

MICTUNING LED Light Bar Wiring Harness Fuse 40Amp Relay ON-OFF spot light Rocker Switch Blue(2 Lead 12ft)

Mictuning Wiring Harness For Off Road Led Lights Is A Perfect Accessory For Off Road Vehicles Working Vehicles And Any Automobile That Could Use A Relay To Power Specific Equipment. This Wiring Harness Is More Than 12 Feet And With 2 Leads Can Hook Up 2 Light Fixturesit Is Universal Fit For Any 7" 10" 12" 20" 30" 40" Light Barsespcially Good For Light Bar Within 180w. For Light Bar Above 180wwe Recommend You Choose Our Mictuning Heavy Duty(hd) Wiring Harness For Better Job. Great Constructionquality Wiring Material - Ul Approved. 5 Pin On/off Rocker Switch - Can Easily Turn On/off The Lights. Inline Blade Fuse & 40a Relay - Multiple Safety Protection. Universal Fit - Compatible With All Automobilesboats And Devices Equipped With A 10-30v Power Source. Quick & Easy Install1. Connect The Red+ Wire From The Fuse To Battery +; Connect The Black Wire From The Relay To The Battery -; 2. Connect The White+;black- Wire From The Relay To Light Bar(red/black Correspond To The Wire Of Lights Bar) ;3. Connect The Red+/black- Wire Of The Switch To Battery Or Any Place Of Your Car System To Get Power For The Switch;4. Turn On On/off Button Of Switch To Test The Lights Bar. Tips:1)if Let The Harness Short Circuit The Wire Would Meltpls Let Professinal Installer To Wire It;2)if You Wire The Harness To A Battery Directlythe Rocker Switch Will Glowing Even When The Vehicle Is Off;if You Don't Want The Switch Always Glowing After You Turned Off Engineyou Can Hook The Harness To A Source On Your Fuse Panel. What You'll Get: 1 Yr Mictuning Warranty And Lifetime Friendly Customer Service. Package Included:1 X Wiring Harness With 5pin Rocker Switch1 X Diagram.

MICTUNING LED Light Bar Wiring Harness Fuse 40Amp Relay ON-OFF spot light Rocker Switch Blue(2 Lead 12ft)MICTUNING-Wiring-Harness-Rocker-Switch

MICTUNING LED LIGHT BAR WIRING HARNESS FUSE 40AMP RELAY ON-OFF SPOT LIGHT ROCKER SWITCH BLUE(2 LEAD 12FT) Advantage
Brand :    mictuning
Color :    No.1: 2 Lead( Rocker Switch 12ft)
Model :    101039
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Part (mictuning) reviews for MICTUNING LED Light Bar Wiring Harness Fuse 40Amp Relay ON-OFF spot light Rocker Switch Blue(2 Lead 12ft) available as-of ( May 2019 )
MICTUNING 03 Series wiring harness kit with 5 pin on/off rocker switch and easy to install.Great Construction:40A Power Relay & Inline Blade Fuse for multiple safety protection.With 2 lights output connections,it can hook with 2 led work light or 2 small watt led light bar and any else off road LEDs.CAUTIONs:We recommend professional installation,pls let professinal installer to wire the harness kit; If let the wire short circuit,the harness would melt and even caught a fire,We suggest that wrap all exposed wire with electrical tape to avoid a short circuit; Pls make sure your light within power 180W, or it would got melt as well.12FT Extendable Wiring Harness:more than 12ft of wiring from relay to lights that is plenty of length to put it where you want, NOT LIKE OTHERS' ONLY 10FT.Details Makes Perfect:adopt 16 Gauge flexible strand copper wire,up to 180 watt load capacity.It is universal fit for any 7" 10" 12" 20" 30" 40" light bars that is within 180w.

MICTUNING 4PCS Rocker Switch Holder Panel Housing Kit Fireproof ABS Plastic Black

This Rokcer Switch Housing Is Made Of High Quality Fireproof Abs+pc Fire-protection Rating V-0. The Precise Design Guarantees That Your Rocker Switchs Can Be Safely And Quickly Installed On The Dashboard Of Vehicle Or Boat. This Strong Bracket Gives You Unlimited Options To Mount Many Extra Switches You Can Use It To Extend Your Switch Pannel To Meet Your Needs.

MICTUNING 4PCS Rocker Switch Holder Panel Housing Kit Fireproof ABS Plastic BlackMICTUNING-Rocker-Housing-Fireproof-Plastic

MICTUNING 4PCS ROCKER SWITCH HOLDER PANEL HOUSING KIT FIREPROOF ABS PLASTIC BLACK Featured
Brand :    mictuning
Color :    Panel 4PCS
Size :    4Pcs Switch Panel
Model :    MH004
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Part (mictuning) reviews for MICTUNING 4PCS Rocker Switch Holder Panel Housing Kit Fireproof ABS Plastic Black available as-of ( May 2019 )
This strong bracket gives you unlimited options to mount many extra switches to your vehicle or boatInner dimension: 1.50 x 1.06 x 0.87 inches Color: Black Plastic ABSWarranty: 2 yeards limited warrantyQty: 4 pcs rocker switch panel housingMICTUNING provide you high quality ABS + PC fireproof V-0 rocker switch housing, can be used on various vehicles and boats, SUV, ATV, UTV, Marine

Polaris RZR 1. 75" inch Roll Bar LED Light Bar Mount Adjustable

Easily Attach Any Standard Size Led Light To A Roll Cage Or Other Tubular Area Quickly And Easily. These Innovative Mounts Ship Two To A Set Giving You The Perfect System For Individual Cube Lights On Either Side Or A 50-inch Light Bar That Mounts To Both. These Mounts Feature The Ability To Rotate A Full 360-degrees Allowing You To Get The Perfect Angle For Any Attachment. These Will Fit Any 1. 75" Tubing But Are Optimized For The Polaris Rzr. Do Not Use On Aftermarket Cages (the Diameter Is Always Smaller And The Clamp Will Not Hold Tight)

Polaris RZR 1. 75" inch Roll Bar LED Light Bar Mount AdjustablePolaris-1-75-Light-Mount-Adjustable

Polaris Rzr 1.75" Inch Roll Bar Led Light Bar Mount Adjustable (Wd Electronics) Review

I Bought This Product To Mount A Led Aux. Light On My Polaris Razor. This Clamp Was More Than Half Of The Cost Of The Axia Alloys Clamp That I Also Looked At. I Was Concerned That This Clamp Might Be Inferior To The Axia Alloys Clamp. I Needn't Have Worried This Clamp Is Very Robust It Holds My Light Bar Rock Steady. I Bought A Curved Led Light Bar So This Type Of Clamp Is Crucial To Getting The Proper Alignment To Center The Light Between The Roll Cage.

Review from M. Guest, British Columbia

Review from G. Benton, Poitou-Charentes

I Attempted To Use These To Mount A Small 20inch Light Bar To An After-market Powder Coated 1. 75" Cage Tube. As Expected They Are Very Difficult To Mount. Getting Both Sides To Line Up To Slip The Bolt In Requires Much Leverage. After Installing I Found That They Would Rotate Around The Tube. I Removed Them And Used Thicker Rubber. They Still Moved.

Image of Polaris-rzr-1.75"-inch-roll-bar-led-light-bar-mount-adjustable-(wd-electronics)

Do A Great Job For Led Light Bar On Wildcat.

This Was A Great Purchase For My Utv. Easily Mounted To The Roll Cage And I Was Impressed With The Quality And Feel Of The Brackets. The Best Part Was It Kept Me From Drilling Into My Roll Cage And Having To Guess The Right Hole Patterns. I Would Purchase Again

U. Shirley, Texas

POLARIS RZR 1. 75" INCH ROLL BAR LED LIGHT BAR MOUNT ADJUSTABLE Spotlight
Brand :    wd electronics
Color :    Black
Model :    1.75roll
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Part (wd electronics) reviews for Polaris RZR 1. 75" inch Roll Bar LED Light Bar Mount Adjustable available as-of ( May 2019 )
Optimized for the Polaris RZR STOCK CAGE360 Degree swivel options for mounting on any shaped Roll Cage.Universal fit for all the LED Square/Round Work Light & LED Work Light BarMounts to Factory Bar & Rod ( No Drilling Required ) - NOT FOR USE ON MOST AFTERMARKET CAGES.Full Aluminum Metal construction that help stability and strength when mounted, High quality power coat that resists rust and dirt
Mictuning wiring harness rocker switch (H608011) Price : 19.99, was : 30.99 as 2017-01-24
USUKDEFRESITJPCNCAGlobal
United States
Great Britain
German
France
Spain
Italy
Japan
China
Canada
World Wide
Mictuning wiring harness rocker switch (H608011) Reviewed by on jerdus.com

Top mictuning wiring harness rocker switch (h608011) Content

The F.A.Q. for Mictuning wiring harness rocker switch (H608011)

I Was A Little Hesitant To Buy This Set At First Because It Had Quite A Bit Of Mixed Reviews But I Ultimately Took The Plunge Because I Really Liked The Look Of The Toggle Switches. I Ended Up Purchasing The Wiring For A Led Light Bar (1 Lead 14ft) Spot Lights (2 Leads 14ft) And Box Mount To Hold Both The Toggles. They Are All From The Same Seller So Instead Of Writing Separate Reviews For All Three I Ll Discuss Them All In This Review. The Mount For The Toggles Aren T Necessary But I Thought It Gave Them A Very Clean Professional Look. I Actually Love This Kit. If Mounted Correctly The Switches Look Like They Could Have Come Stock On The Vehicle. Other Reviews Complained About The Length Of The Wires So I Ordered A Larger Size (14ft Rather Than 12ft). I Had A Few Feet Of Wire Left Over And Had To Zip Tie And Tuck Away The Excess (i Have A 2008 Jeep Wrangler). Once You Figure Out The Setup It Is Pretty Easy To Install. Many Of The Reviews On Here Were Unfavorable Because The Instructions Are Horrible. I Have To Admit They Are Pretty Bad. I Was Able To Figure Out Most Of It Except For The Wiring On The Back Of The Toggle. In The End I Ended Up Throwing In The Towel And Paying A Visit To My Father-in-law Who Use To Do Electrical For The Railroad. I Figured I Would Write Some Instructions With Pictures To Hopefully Help Out Others. This Definitely Isn T The Only Way To Wire In Your Lights And May Not Even Be The Best Way But I Did Have Someone Experienced In Electrical Helping Me So I Know It Is A Safe Way To Complete This. Step 1: Mount Your Lights To Your Vehicle. I Mounted A 52 Led Light Bar And Two 6 Spot Lights To The Front Of My 2008 Jeep. While I Was Mounting The Light Bar I Made Sure The Wires Were Tucked Under The Mount. Depending On Your Vehicle This Is Done In Different Ways. Step 2: Your Lights Should Have A Red (positive) And Black (negative) Wire. This Kit Comes With Adapters (see Picture) Which You Clamp To Both Of These Wires So They Can Be Connected To The Red And Black Wires In This Kit. Once These Adapters Have Been Connected You Can Attach Them To The Red/black Leads. The Led Light Bar Kit Only Has One Lead While The Spot Lights Have Two Leads. Before Purchasing I Recommend You Read The Description To Make Sure You Get The Right Kit For Your Needs. Also Make Sure You Checks The Watts On Your Lights To Make Sure The Kit Can Handle The Watts On Your Lights. Step 3: I Wired My Lights Directly To The Battery. This Means I Can Turn Them On Even Without Turning On My Vehicle. Also The Blue Lights On The Toggle Switch Stay On Permanently. Attach The Red And Black Wires With A Loop On The End To The Screws On Your Battery (see Picture). Make Sure You Attach The Red To The Positive And Black To The Negative. This Kit Does Contain A Fuse Box Which Already Comes Pre-attached. Step 4: The Blue White And Black Wires Go To The Toggle Switch. You Will Need To Run These Wires Through The Firewall In Your Vehicle In Order To Mount It Inside Your Vehicle. I Was Able To Find A Hole (see Pictures) On The Driver S Side A Little Above The Pedals. I Ran My Wires Through This Hole And Removed The Side Panel Of My Dash To Bring The Wires Up To The Space Between My Windshield And Dash. I Haven T Quite Decided Where I Want To Mount The Toggles Yet So They Are Just Sitting On By Dash For The Time Being. I May End Up Cutting A Hole Somewhere In My Dash But Haven T Decided Yet. Step 5: This Is The Part I Found A Little Tricky And Through The Instructions Didn T Explain Very Well. The Little Red And Black Wires Need To Be Connected To The Back Of The Toggle Switches. The Black Wires Are Connected To 7 And 8. The Double Red Wire Is Connected To 2 And 6 And The Single Red Wire Is Connected To 3 (see Picture). The Small Black Wire Is Then Connected To The Large Black Wire. The Small Double Red Wire Is Attached To The Large White Wire. The Single Red Wire Is Attached To The Large Blue Wire. See Picture. Step 6: Now That Everything Is Attached I Zip Tied The Wires To The Tubing That Contained All The Other Wires Under By Hood (see Picture). This Basically Just Cleans It Up A Bit And Keeps Everything In Place. I Also Gathered Together Any Excess Wire And Zip Tied It Together And Tucked It Out Of The Way. I Didn T Want To Shorted The Wires Because I Wasn T Sure It That Would Have Any Negative Effects. I Also Noticed Popping When The Small Wires On The Back Of The Toggle Switch Touched; To Fix This I Wrapped Each Individual Wire In Electrical Tape. I Make It Look Nicer I Then Wrapped All The Small Wires Together In Electrical Tape.

A number of questions have been asked here.

Q&A

(0) Question: will this work for a 52 inch 300w led bar light ?


(1) Question: i'm looking for a led wiring harness, single lead with the bumper light bar switch. is that something that you can put together?


(2) Question: the leds in my switch are on even when the car is turned off? any solution to this problem or is it okay?


(3) Question: this is a dual set up where i can run 2 seprate cubes on one harness


(4) Question: i have two light bars on my buggy a 28" 180w and a 52" 300w. will this harness be compatible for both of these lights?


(5) Question: so dose one way tune one light bar on and the other way turn it back on and a another one on?


(6) Question: will this work for a polaris ranger? i bought a 240 watt 42" light bar, just looking for wiring harness now


(7) Question: will this switch mount under my dash, in one of the factory spots?


(8) Question: can you mount the switch in the dash?



(note) Question: where/how to get Mictuning (manufacturer's brand) accessories & similiar Mictuning's products


Automotive 18148651, Electrical 10692751, Lighting & Electrical 19592751, Replacement Parts 13791751, Wiring Harnesses 13992751Top Mictuning wiring harness rocker switch (H608011) FAQ Content

Best mictuning wiring harness rocker switch (h608011) in review

Mictuning is great, just wish it was longer.

Q. Miller, Oregon

You might like to see Polaris Rzr 1.75" Inch Roll Bar Led Light Bar Mount Adjustable Auto Part 1 75roll
  • Addition: Optimized for the Polaris RZR STOCK CAGE
  • Addition: Full Aluminum Metal construction that help stability and strength when mounted, High quality power coat that resists rust and dirt
polaris rzr 1.75" inch roll bar led light bar mount adjustable: wd electronics auto part easily attach any standard size led light to a roll cage or other Polaris Rzr 1.75" Inch Roll Bar Led Light Bar Mount Adjustable (Wd
Or you might like to consider Mictuning 12ft light wiring harness Auto Part 101044
  • Special: Details Makes Perfect:adopt 16 Gauge flexible strand copper wire,up to 180 watt load capacity.It is universal fit for any 7" 10" 12" 20" 30" 40" light bars that is within 180w.
  • Special: MICTUNING 03 Series wiring harness kit with 5 pin on/off rocker switch and easy to install.
mictuning 12ft led light bar wiring harness - 40amp relay fuse laser blue on-off rocker switch (rear lights): mictuning auto part mictuning wiring harness Mictuning 12ft light wiring harness

X. Angelica, Australian Capital Territory says

Pros: -cost -length Of Wire -everything You Need Cons: -without Electrical Knowledge You'd Be Returning It -incorrectly Wired -non-existent Customer Service This Is Essentially A Parts Kit. Whoever Did The Wiring For My Particular Kit Was Either Color Blind Or Didn't Care. Main Reason This Got 3 Stars From Me Was Because Of The Length Of Wiring And Covering. If You Know Anything About Wiring You Know The Relay Is Essentially The Main Piece Stemming From That This Kit Gives You Approximately 18" To The Battery Terminal With An Inline Fuse On The Positive Side; 78" Allotted To The Switch With A Connector At 41"; And 116" Available To The Light Bar. Upon Doing A Test With Their Included Installation Guide I Found That While The Switch Was Off The Top Logo Portion Was Always Lit And When I Turned The Switch On Then The Lower "led Light Bar" Would Light Up. After Running A Volt Meter With Different Combinations I Determined That The Wires From The Relay To The Switch Were Assembled Incorrectly. In My Particular Case I Had To Plug The White Wire Into The Middle Pin And The Red Wire On The Bottom Left. I Disconnected The "splice" And Ran An Independent Wire From The Bottom Right To My Dimmer Switch. Which Does Allow The Light The Dim With The Interior. With The Connection It Also Turns The Switch Light Off Without The Key In The Ignition. I Have Attached A Quick Image I Took For Clarification In Case Your Having The Same Issue. This Was While I Was Running The Test So The Yellow Connection Will Be What You Will Use To Connect To The Dimmer. If You Don't Care If It Dims But Still Want It To Turn Off When Ignition Is Off Then Just Take That Connector To A Fuse That Only Has Power When Ignition Is On And You'll Have The Same Results. In Conclusion I Was Able To Get It To Work But Be Warned That This Does Not Seem To Be A Plug N' Play Harness If You Want Things Wired Correctly. End Result For Me Was 2 Stars Because If I Didn't Already Know What Needed To Be Done To Fix It I'd Be Sending It Back As A Dissatisfied Customer.

M. Shayna, Utah

The Harness Was Easy To Install And For The Most Part It Was Plug And Play If The Instructions Were More Clear I Would Have Given 5 Stars. Like Others Have Said If You Follow The Directions The Bottom Half Of The Rocker Switch Will Be Lit At All Times. I Didn't Want That So On My 2016 Polaris Ranger 570 Full Size I Ran My Own Wires For The Light On The Switch. This Was My Set Up And What I Did To Wire The Light On The Switch. Under The Hood There Is A Terminal Strip And If You Have A Winch It Should Have One Terminal With An Orange Wire Running To It And Then A Red Wire Off The Same Terminal Going To The Winch Switch Connection If You Don't Have A Winch Then Hopefully The Orange Wire Is Still There Because That Is The Switched Power Wire. I Ran A Wire From The Terminal To The Bottom Right Of The Switch And The Ran A Black Wire From The Top Right Of The Switch To Another Terminal On The Block I Then Ran A Second Wire From This Terminal And Connected It To The Frame For A Ground. The Switch Now Lights Up As It Should When I Turn The Key On The Bottom Part Of The Switch Lights Up. It Should Be Noted That When You Turn The Key Off It Takes About A Minute Before The Light Shuts Off. You Will Notice That The Light Dims When The Key Is First Turned Off And Then Will Shut Off After A Minute Or So.

J. Laura, Thurrock says

Good Quality Works Great And Looks Professional! Very Satisfied Make Sure To Wire It Up Right Cause One Of The Other Reviews Said It Caught Fire Or Something But It Shouldnt Do That It Has A Fuse To That Was Their Wiring Fail Haha Works Perfect For My 20inch Cree Light Bar On My Truck And It Is 120watt.

T. Zelda, Medway

The Bad- The Switch Is Very Very Very Cheap. The Male Terminal On The Switch Will Pull Out If You Disconnect The Female Terminal. This Is My Second Kit And Both Had The Same Issue. The Good- The Install Was Easy And The Wiring Directions Were Very Clear. The Harness Is Put Together Well Enough. The Wire Lengths Were Sufficient And I Like That You Can Disconnect The Switch From The Harness (without Breaking The Switch) With A Quick Connect Plug.

L. Rebecca, Massachusetts says

Excellent purchase

A. Nielsen, Maryland

The harness was easy to install and for the most part it was plug and play, if the instructions were more clear i would have given 5 stars. Like others have said if you follow the directions the bottom half of the rocker switch will be lit at all times. . I didn't want that so on my 2016 polaris ranger 570 full size i ran my own wires for the light on the switch. This was my set up and what i did to wire the light on the switch. Under the hood there is a terminal strip and if you have a winch it should have one terminal with an orange wire running to it and then a red wire off the same terminal going to the winch switch connection, if you don't have a winch then hopefully the orange wire is still there because that is the switched power wire. I ran a wire from the terminal to the bottom right of the switch and the ran a black wire from the top right of the switch to another terminal on the block, i then ran a second wire from this terminal and connected it to the frame for a ground. . The switch now lights up as it should, when i turn the key on the bottom part of the switch lights up. It should be noted that when you turn the key off it takes about a minute before the light shuts off. You will notice that the light dims when the key is first turned off and then will shut off after a minute or so.

A. Medina, Cheshire says

Great Product. Plug And Play. Pre-wired For You Practically. The Electrodes That Go On The Battery Terminals Were These Wird Thin Circle Of A Strange Diameter. Broke Off And Had To Be Replaced Immediately. Otherwise This Was Exactly What I Needed. Everything Is Laid Out In The Directions For You. Comes With The Jumpers To Wire The Switch With No Hassle. If You Want The Blue Led Reversed Top To Bottom Simply Switch The Hots The Reds On The Rocker Switch The Reds On The White And Blue Leave The Ground The Same.

Z. Weber, North Yorkshire

I ordered this wiring harness after trying a different brand which shorted out and nearly caught on fire. The switch and connectors are good and heavy enough to handle the load. I would recommend this wiring harness, just make sure you check all of the connections

D. Williams, Waltham Forest says

Great product. Plug and play. Pre-wired for you practically. The electrodes that go on the battery terminals were these wird, thin circle of a strange diameter. Broke off and had to be replaced immediately. Otherwise this was exactly what i needed. Everything is laid out in the directions for you. Comes with the jumpers to wire the switch with no hassle. If you want the blue led reversed top to bottom, simply switch the hots the reds on the rocker switch the reds on the white and blue, leave the ground the same.

R. Rita, Wirral

Wiring Gauge Was A Little Light And The Instructions For The Switch Were Lacking But Overall It's Decent. Had Plenty Of Wire For Our Use (led Bar On A Golf Cart) And Was Easily Customized For The Application. Note That If Not Using Switched Power The Switch Will Remain Lit At All Times Unless You Pull One Of The Power Leads To The Switch's Backlight.

B. Diana, Colorado says

Excellant

U. Lynette, Georgia

Good quality wiring harness, easy to install.



Leave a Reply

You must be logged in to post a comment.


Top mictuning wiring harness rocker switch Review Content

Related Products

Product Image Gallery

Top-mictuning-wiring-harness-rocker-switch-10010vms0th8-Content