Mictuning Wiring Harness Rocker Switch (101039) 3194

Review for led light bar wiring harness fuse

Price was $14.99. Very nice. My batteries is in the front of the vehicle on the passenger side. I had to extend the wires so they would reach my dash mounting location.

-N. Powell

Led Light Bar Wiring Harness Fuse 40amp Relay On-off Spot Light Rocker Switch Blue 2 Mictuning Wiring Harness For Off Road Led Lights Is A Perfect Accessory For Off Road Vehicles, Working Vehicles And Any Automobile That Could Use A Relay To Power Specific Equipment. -Mictuning Led Light Bar Wiring Harness Fuse 40amp Relay On-off Spot Light Rocker Switch Blue 2 Lead

  1. Listed: Details Makes Perfect:adopt Flexible Strand Copper Wire, Up To 180 Watt Load Capacity. It Is Universal Fit For Any 7″ 10″ 12″ 20″ 30″ 40″ Light Bars That Is Within 180w.
  2. Listed: Great Construction:40a Power Relay & Inline Blade Fuse For Multiple Safety Protection. With 2 Lights Output Connections, It Can Hook With 2 Led Work Light Or 2 Small Watt Led Light Bar And Any Else Off Road Leds.

Inexpensive Mictuning Wiring Harness Rocker Switch (Auto Accessory) 101039

Buy Now

Introduction

Very useful. Able to wire up my new lights with no hassle. The wires are long enough to get almost anywhere on my wrangler, maybe too long. It would be nice if the cable was easily shortened either at the end by the lights or attaching to the relay. I ended up winding up a lot of wire under the lights. Also, if the connections to the relay were un-finished to be able to threaded thru smaller holes for the firewall and engine bay. Best led light bar wiring harness fuse | Mictuning-Auto Accessory Review as-of ( Nov 2018 ) Listed MICTUNING LED Light Bar Wiring Harness Fuse 40Amp Relay ON-OFF spot light Rocker Switch Blue(2 Lead) Mictuning 03 series wiring harness kit with 5 pin on/off rocker switch and easy to install.. Details makes perfect:adopt flexible strand copper wire, up to 180 watt load capacity. it is universal fit for any 7" 10" 12" 20" 30" 40" light bars that is within 180w.. Great construction:40a power relay & inline blade fuse for multiple safety protection. with 2 lights output connections, it can hook with 2 led work light or 2 small watt led light bar and any else off road leds.. 10ft extendable wiring harness:up to 10ft of wiring that is plenty of length to put it where you want.. Cautions:we recommend professional installation, pls let professinal installer to wire the harness kit; if let the wire short circuit, the harness would melt and even caught a fire, we suggest that wrap all exposed wire with electrical tape to avoid a short circuit; pls make sure your light within power 180w, or it would got melt as well. .

Mictuning led light bar wiring harness fuse 40amp relay on-off spot light rocker switch blue 2 lead Review (101039)

The harness was well built, the wiring instructions had a lot to be desired, the switch side of the diagram was not legible, someone who didn't know what they were doing probably would have thrown their hands in the air and quit -O. Fabian

Mictuning Wiring Harness Rocker Switch

Rank
Automotive
Brand
MICTUNING
ClothingSize
2 Lead 12 Ft Normal
Color
No.1: 2 Lead( Rocker Switch)
EAN
0608613086178
Product Dimensions
Height:2.00 inches
Length:12.00 inches
Width:2.00 inches
Manufacturer
MicTuning
Guarantee
Parts
Model
101039
MPN
101039
Total-Items
1
Quantity
1
Part/Serial Number
101039
Group-Order
Automotive Parts And Accessories
Category
AUTO ACCESSORY
ReleaseDate
2017-06-27
Size
2 Lead 12 Ft Normal
UPC
608613086796
Warranty
2 Year Warranty For Genuine MICTUNING Brand Lights, Replacement Of Whole Light Or Accessories Upon Proof Of Defective Of Item Itself.

led light bar wiring harness fuse 40amp relay on-off spot light rocker switch blue 2 Automotive Parts And Accessories, Mictuning wiring harness for off road led lights is a perfect accessory for off road vehicles, working vehicles and any automobile that could use a relay to power specific equipment. this wiring harness is up to 10 feet and with 2 leads can hook up 2 light fixtures, it is universal fit for any 7" 10" 12" 20" 30" 40" light bars, espcially good for light bar within 180w. for light bar above 180w, we recommend you choose our mictuning heavy duty(hd) wiring harness for better job. great construction quality wiring material - ul approved. 5 pin on/off rocker switch - can easily turn on/off the lights. inline blade fuse & 40a relay - multiple safety protection. universal fit - compatible with all automobiles, boats and devices equipped with a 10-30v power source. quick & easy install 1. connect the red+ wire from the fuse to battery +; connect the black wire from the relay to the battery -; 2. connect the white+; black- wire from the relay to light bar(red/black correspond to the wire of lights bar) ; 3. connect the red+/black- wire of the switch to battery or any place of your car system to get power for the switch; 4. turn on on/off button of switch to test the lights bar. tips:1)if let the harness short circuit the wire would melt, pls let professinal installer to wire it; 2)if you wire the harness to a battery directly, the rocker switch will glowing even when the vehicle is off; if you don't want the switch always glowing after you turned off engine, you can hook the harness to a source on your fuse panel. what you'll get: 1 yr mictuning warranty and lifetime friendly customer service. package included:1 x wiring harness with 5pin rocker switch, 1 x diagram. Mictuning Wiring Harness Rocker Switch (101039-Mictuning).

Mictuning Wiring Harness Rocker Switch Automotive Parts And Accessories

led light bar wiring harness fuse MICTUNING LED Light Bar Wiring Harness Fuse 40Amp Relay ON-OFF spot light Rocker Switch Blue(2 Lead) (Switch to Mobile/Desktop Version)

Good toggle switches.

Mictuning Led Light Bar Wiring Harness Fuse 40amp Relay On-off Spot Light Rocker Switch Blue 2 Lead
Click to see NoticeMictuning Wiring Harness Rocker Switch (101039)"Excellent"


MICTUNING LED Light Bar Wiring Harness Fuse 40A Relay On-off Rocker Switch Blue 2 Lead

Worked Great Wires Were Placed In Good Spots On The Harness And They Trimmed Easily. The Relay Has A Sort Of French Cleat On The Back That Might Fit Something Standard That Wasn't On My Vehicle But Some Double Sided Foam Tape Put It Right Where I Wanted It. The Grommet Around The Switch Was Too Tight To Fit In My Standard Dash Hole. It Trimmed Easily Enough By Knocking Off Some Wings. I'd Hate To Have To Get It Out Again But Most People Never Will Need It Out. It Made My Lights Ssssooooo Simple To Hook Up.

Mictuning wiring harness for off road led lights is a perfect accessory for off road vehicles, working vehicles and any automobile that could use a relay to power specific equipment. This wiring harness is up to 10 feet and with 2 leads can hook up 2 light fixtures, it is universal fit for any 7" 10" 12" 20" 30" 40" light bars, espcially good for light bar within 180w. For light bar above 180w, we recommend you choose our mictuning heavy duty(hd) wiring harness for better job. Great construction quality wiring material - ul approved. 5 pin on/off rocker switch - can easily turn on/off the lights. Inline blade fuse & 40a relay - multiple safety protection. Universal fit - compatible with all automobiles, boats and devices equipped with a 10-30v power source. Quick & easy install 1. Connect the red+ wire from the fuse to battery +; connect the black wire from the relay to the battery -; 2. Connect the white+; black- wire from the relay to light bar(red/black correspond to the wire of lights bar) ; 3. Connect the red+/black- wire of the switch to battery or any place of your car system to get power for the switch; 4. Turn on on/off button of switch to test the lights bar. Tips:1)if let the harness short circuit the wire would melt, pls let professinal installer to wire it; 2)if you wire the harness to a battery directly, the rocker switch will glowing even when the vehicle is off; if you don't want the switch always glowing after you turned off engine, you can hook the harness to a source on your fuse panel. What you'll get: 1 yr mictuning warranty and lifetime friendly customer service. Package included:1 x wiring harness with 5pin rocker switch, 1 x diagram.

MICTUNING LED Light Bar Wiring Harness Fuse 40A Relay On-off Rocker Switch Blue 2 LeadMICTUNING-Wiring-Harness-Rocker-Switch

Mictuning wiring harness rocker switch (MIC-B1003) FAQ.

I Have A Gator 550xuv And The Wires Were Too Short. Plus The Ends On Two Of Them Had To Be Cut Extended And Different Fittings Pit On Them. For The Price You Can't Buy The Wire Fuses Etc Any Cheaper Separately. -Notice from U. Alma, Rheinland-Pfalz

Click to Show mictuning wiring harness rocker switch (mic-b1003) Details

I Have Wired Dozens Of Light Bars So Id Say I Know What I Was Doing When Wiring This One. The Wires Immediately Melted When We Tested The Light Bar. The Only Thing I Can Think Is That The Relay Is Bad. Would Not Recommend This Product. I've Gotten Better Use Out Of The Cheapest One You Can Buy Than This One.

Mictuning-wiring-harness-rocker-switch-(mic-b1003) set picture

- Y. ValdezSuper Easy To Install. Hooked Up A 42 Inch Light Bar Without Any Problem. Kit Includes Everything Needed To Hook Up 2 Light Bars And Easily Understandable Instructions. The Rocker Switch Looks Sweet And Fits Perfectly Where I Put It.

I Used This With My Eyourlife Off Road Extra 52" Light Bar 300w Flood Spot Combo Beam. After Reading The Reviews I Felt This Would Best Work On The Light-bar. It Does And Looks Great In Cab Of My 98 Wrangler. This Does Not Come With A Housing Just The Wires And Switches. I Personally Just Pulled Off The Bottom Cover Of My Steering Wheel Mount And Simply Measured And Cut Out My Own Space. The Beveled Mounting Clasps On The Switch Holds The Switch In Place. Looks Like A Pro Did The Work. All The Wiring Looks Capable And The Instructions Made The Rest Of The Hook-up Simple. I Have Run The Lights Several Times And Have Not Had Any Electrical Issues Thus Far. I'll Update If A Problem Arises. So Far Going On 6 Months Of Satisfaction.

E. Florence, Auvergne

MICTUNING LED LIGHT BAR WIRING HARNESS FUSE 40A RELAY ON-OFF ROCKER SWITCH BLUE 2 LEAD Summary
Price :    $13.69 (was $25.99)
  • Mictuning mic-b1003 wiring harness kit with 5 pin on/off rocker switch and easy to install.
  • 10ft extendable wiring harness:up to 10ft of wiring that is plenty of length to put it where you want.
  • Cautions:we recommend professional installation, pls let professinal installer to wire the harness kit; if let the wire short circuit, the harness would melt and even caught a fire, we suggest that wrap all exposed wire with electrical tape to avoid a short circuit; pls make sure your light within power 180w, or it would got melt as well.
  • Great construction:40a power relay & inline blade fuse for multiple safety protection. with 2 lights output connections, it can hook with 2 led work light or 2 small watt led light bar and any else off road leds.
  • Details makes perfect:adopt flexible strand copper wire, up to 180 watt load capacity. it is universal fit for any 7" 10" 12" 20" 30" 40" light bars that is within 180w.
Brand :    mictuning
Color :    Black
Size :    Wiring Harness Kit(max.180W)
Weight :    0.55 pounds
Model :    MIC-B1003
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Part (mictuning product review) for MICTUNING LED Light Bar Wiring Harness Fuse 40A Relay On-off Rocker Switch Blue 2 Lead available as-of ( Nov 2018 )

Led Light Bar Nilight 2PCS 7 51w 5100LM Black Round Spot Light Pod Off Road Fog Driving Roof Bar Bumper Jeep,SUV Truck , Hunters, 2 years Warranty

Specification: led power: 96w (32 x 3w high intensity led) beam pattern: spot beam, focused light in the middle of the lane, extreme further distance through the darkness. Input voltage: 9-30v dc (fits 12v, 24v vehicles) working lifespan: over 50, 000 hours working temperature: -40 85 degrees celsius led color temperature: pure white 6000k-6500k material: 6063 aluminum profile, high quality led chips, pmma lens protective covers:a gift from nilight to protect the lights during the usage and also it will increase the spot effect for the work lights waterproof rate: ip67; waterproof, dustproof, quakeproof and anti-corrosive. Certifications: ce, fcc and rohs applications: off road lighting: jeep, 4x4, car, atv, utv, suv, truck, trailer, forklift, train, boat, bus, outdoor lighting, etc. Other lighting: excavator, dozer, road roller, crane, tractor, harvester, grain drill, snowplow, fire engine, rescue vehicle, camping, mining, construction lighting, etc. Household lighting: garden, backyard, garage, indoor lighting. (note: use a voltage transformer/converter to convert the ac 110-120v to dc 12v for indoor use. ) note: they are aftermarket parts. Not d. O. T. Approved. Do not use if d. O. T. Is required. For off road use only. Before installing this product, please check your state/provincial and local/municipal laws and regulations. Why choose nilight light? - high quality product and service - 2 year warranty for genuine nilight light bar - most customer s choice -more items options for choice

Led Light Bar Nilight 2PCS 7 51w 5100LM Black Round Spot Light Pod Off Road Fog Driving Roof Bar Bumper Jeep,SUV Truck , Hunters, 2 years WarrantyNilight-5100LM-Driving-Hunters-Warranty

LED LIGHT BAR NILIGHT 2PCS 7 51W 5100LM BLACK ROUND SPOT LIGHT POD OFF ROAD FOG DRIVING ROOF BAR BUMPER JEEP,SUV TRUCK , HUNTERS, 2 YEARS WARRANTY Features
Price :    $47.13
  • Long lifespan: special designed aluminum alloy cooling fins effectively extend the lifespan to over 50, 000 hours
  • Bright and white: 5100lm/pcs, very bright white ray to illuminate your road in the darkness, see the forward road clearly, which will give you a more safe and comfortable driving experience
  • Ip 68 rating: heavy duty metal housing is 100% waterproof even in the extreme weather
  • Durable design:portability and versatility with a tough, aluminum cover, tough shatterproof pc durable to withstand for any extreme condition
  • Package included:2pcs 51w led light bar, 2 sets of mounting barckets, 2-year warranty card
Brand :    nilight
Size :    2PCS 51W Spot Lights
Model :    NI23E-51W
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (nilight product review) for Led Light Bar Nilight 2PCS 7 51w 5100LM Black Round Spot Light Pod Off Road Fog Driving Roof Bar Bumper Jeep,SUV Truck , Hunters, 2 years Warranty available as-of ( Nov 2018 )

MICTUNING HD 300w LED Light Bar Wiring Harness Fuse 40 Amp Relay ON-OFF Rocker Switch Blue 2Lead

I Ordered This Wiring Harness After Trying A Different Brand Which Shorted Out And Nearly Caught On Fire. The Switch And Connectors Are Good And Heavy Enough To Handle The Load. I Would Recommend This Wiring Harness Just Make Sure You Check All Of The Connections

Mictuning heavy duty 2 lead wiring harness is designed and made specifically for high output light bars which has substantially higher amperage draw than its smaller counterparts. It is a perfect accessory for off road vehicles, working vehicles and any automobile that could use a relay to power specific equipment. The mictuning wiring harness is up to 10 feet and with 2 lead can hook with 1 heavy duty off road led light bar above 180w or 2 small light bar, up to 300 watt load capacity. It is universal fit for any 7" 10" 12" 20" 30" 40" 50" light bars. Great construction quality wiring material - ul approved. Illuminated on/off toggle switch - can easily turn on/off the lights. Inline blade fuse & 40a relay - multiple safety protection. Universal fit - compatible with all automobiles, boats and devices equipped with a 10-30v power source. Quick & easy install 1. Connect the red+ wire from the fuse to battery +; connect the black wire from the relay to the battery -; 2. Connect the white+; black- wire from the relay to light bar(red/black correspond to the wire of lights bar) ; 3. Turn on on/off button of switch to test the lights bar. Cautions:we recommend professional installation, pls let professinal installer to wire the harness kit; if let the wire short circuit, the harness would melt and even caught a fire, we suggest that wrap all exposed wire with electrical tape to avoid a short circuit; pls make sure your light within power 300w, or it would got melt as well. What you'll get: 1 yr mictuning warranty and lifetime friendly customer service. Package included:1 x wiring harness with rocker switch, 1 x diagram.

MICTUNING HD 300w LED Light Bar Wiring Harness Fuse 40 Amp Relay ON-OFF Rocker Switch Blue 2LeadMICTUNING-Wiring-Harness-Rocker-Switch

Mictuning wiring harness rocker switch (H608011) FAQ.

This Item Was Purchased As Part Of A Christmas Gift For My Son. He Has An 04 Jeep Cherokee And Will Be Using This To Install His 52 Inch Curved Light Barbwe Bought Him. I Am Very Pleased With The Gauge Of Wire And The Relay And Fuse Block As Well As The Protective Sleeve It's Wrapped In Great Bang For Your Buck Oh Also It Came With The Killer Blue Switch That Says 'light Bar' I Thought That Was A Great Touch. Look Forward To Installing It With Him. Great Product! -Notice from Y. Valencia, Corse

Click to Show mictuning wiring harness rocker switch (h608011) Details

The Bad- The Switch Is Very Very Very Cheap. The Male Terminal On The Switch Will Pull Out If You Disconnect The Female Terminal. This Is My Second Kit And Both Had The Same Issue. The Good- The Install Was Easy And The Wiring Directions Were Very Clear. The Harness Is Put Together Well Enough. The Wire Lengths Were Sufficient And I Like That You Can Disconnect The Switch From The Harness (without Breaking The Switch) With A Quick Connect Plug.

Mictuning-wiring-harness-rocker-switch-(h608011) set picture

- X. AngelicaPros: -cost -length Of Wire -everything You Need Cons: -without Electrical Knowledge You'd Be Returning It -incorrectly Wired -non-existent Customer Service This Is Essentially A Parts Kit. Whoever Did The Wiring For My Particular Kit Was Either Color Blind Or Didn't Care. Main Reason This Got 3 Stars From Me Was Because Of The Length Of Wiring And Covering. If You Know Anything About Wiring You Know The Relay Is Essentially The Main Piece Stemming From That This Kit Gives You Approximately 18" To The Battery Terminal With An Inline Fuse On The Positive Side; 78" Allotted To The Switch With A Connector At 41"; And 116" Available To The Light Bar. Upon Doing A Test With Their Included Installation Guide I Found That While The Switch Was Off The Top Logo Portion Was Always Lit And When I Turned The Switch On Then The Lower "led Light Bar" Would Light Up. After Running A Volt Meter With Different Combinations I Determined That The Wires From The Relay To The Switch Were Assembled Incorrectly. In My Particular Case I Had To Plug The White Wire Into The Middle Pin And The Red Wire On The Bottom Left. I Disconnected The "splice" And Ran An Independent Wire From The Bottom Right To My Dimmer Switch. Which Does Allow The Light The Dim With The Interior. With The Connection It Also Turns The Switch Light Off Without The Key In The Ignition. I Have Attached A Quick Image I Took For Clarification In Case Your Having The Same Issue. This Was While I Was Running The Test So The Yellow Connection Will Be What You Will Use To Connect To The Dimmer. If You Don't Care If It Dims But Still Want It To Turn Off When Ignition Is Off Then Just Take That Connector To A Fuse That Only Has Power When Ignition Is On And You'll Have The Same Results. In Conclusion I Was Able To Get It To Work But Be Warned That This Does Not Seem To Be A Plug N' Play Harness If You Want Things Wired Correctly. End Result For Me Was 2 Stars Because If I Didn't Already Know What Needed To Be Done To Fix It I'd Be Sending It Back As A Dissatisfied Customer.

The Wires Are Just Long Enough Wrapped In Black Plastic For Protection And Easy Hiding. The Instructions Could Have Been A Little More Easier To Read I Mean Not Everyone Is An Electrician Or Deals With Wiring Lights On A Daily Bases. I Had To Search What Colors Go To Which Piece. Overall Good Product Good Price Snaps Right One.

B. Peggy, Knowsley

MICTUNING HD 300W LED LIGHT BAR WIRING HARNESS FUSE 40 AMP RELAY ON-OFF ROCKER SWITCH BLUE 2LEAD Overview
Price :    $14.91 (was $30.99)
  • Great construction: 40a power relay and inline blade fuse for multiple safety protection. it is 2 lead that with 2 lights output connection, it can hook with 1 heavy duty off road led light bar above 180w and two small light bar.
  • Details makes perfect: adopt flexible strand copper wire, up to 300 watt load capacity. it is universal fit for any 7" 10" 12" 20" 30" 40" 50" light bars that is within 300w.
  • Mictuning heavy duty 2 lead wiring harness with on/off rocker switch and easy to install. our packing is being upgraded, so you may receive the wiring harness in the old packing. both of them are genuine products, please used rest-assured.
  • 10ft extendable wiring harness:up to 10ft of wiring that is plenty of length to put it where you want.
  • Cautions:we recommend professional installation, pls let professinal installer to wire the harness kit; if let the wire short circuit, the harness would melt and even caught a fire, we suggest that wrap all exposed wire with electrical tape to avoid a short circuit; pls make sure your light within power 300w, or it would got melt as well.
Brand :    mictuning
Color :    Black
Size :    2 Lead
Model :    H608011
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (mictuning product review) for MICTUNING HD 300w LED Light Bar Wiring Harness Fuse 40 Amp Relay ON-OFF Rocker Switch Blue 2Lead available as-of ( Nov 2018 )

Led Light Bar, Glotech 2PCS 3 24W Cree Led Flood Light Led Pods Offroad Fog Driving Lamp For Pick Up, Jeep, Trucks, Tractors, 4WD, Vehicle, 1 Year Warranty

Glotech brand located in usa warehouse, will arrive in a week after your payment. Specifications: 24w led light bar & 1 years warranty product description: led power: 24w lumens:1500lm perating voltage: 10-30 dc waterproof rate: ip 67 body color: black color temperature: 6000k material: diecast aluminum housing lens material: pmma glass mounting bracket: alu firm bracket opitonal beam: flood 45degree beam pattern lifespan: 30, 000 hours above life time product features: brand new and high quality. Long life span and stable performance. The bracket is easy to install. Low consumption energy saving. Waterproof and anti-corrosion , can be used in the rain or harsh environments. Shake-proof , because of aluminum casing. Can be installed on different trucks, suvs, cars, ships and other means of transport. Package included : 2x 24w led work light & necessary screw and mountting bracket we provide with 1 year warranty period from the date of purchase

Led Light Bar, Glotech 2PCS 3 24W Cree Led Flood Light Led Pods Offroad Fog Driving Lamp For Pick Up, Jeep, Trucks, Tractors, 4WD, Vehicle, 1 Year WarrantyGlotech-Offroad-Driving-Tractors-Warranty

LED LIGHT BAR, GLOTECH 2PCS 3 24W CREE LED FLOOD LIGHT LED PODS OFFROAD FOG DRIVING LAMP FOR PICK UP, JEEP, TRUCKS, TRACTORS, 4WD, VEHICLE, 1 YEAR WARRANTY Advantages
Brand :    glotech
Size :    2PCS 24W Flood
Weight :    2.36 pounds
  • Package included: 2x24w flood beam led work light& necessary screw and mounting bracket. if you have any questions about the product before or after purchase, please feel free to contact us, we are always ready to help you.
  • Wide operating voltage(10-30v) and applation: it can apply to most vehicles of off-road cars, compatible with almost all jeeps, 4x4, cars, trucks, motorcycles, suvs, atvs, boats, etc. many indoor and outdoor uses: garden lighting, backyard lighting, back-up light, off road lighting, construction lighting and so on.
  • High performance:100% ip67 waterproof rate, dustproof, rustproof mounting bracket and diecast aluminum housing guarantee you 30, 000 hours using time.
  • Powerful cooling performance: the heat-skin use aluminum alloy die-casting material with high thermal conductivity, which is much better for heat dissipation than normal light
  • Bright flood beam: equippedd with 6pcsx3w high intensity cree led bulbs, total of 24w at 6000k color temperature, provides super broad viewing area, 60 flood beam can provide super broad viewing area.
Price :    $19.99
Model :    43249-46307
Quantity :    2
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Home (glotech product review) for Led Light Bar, Glotech 2PCS 3 24W Cree Led Flood Light Led Pods Offroad Fog Driving Lamp For Pick Up, Jeep, Trucks, Tractors, 4WD, Vehicle, 1 Year Warranty available as-of ( Nov 2018 )

MICTUNING LED Light Bar Wiring Harness - 40Amp Relay Fuse BLUE ON-OFF Rocker Switch REAR LIGHTS

This Hardness Kit Came With Everything We Needed. My Husband Used It On 2012 Jeep Wrangler. He Used This With Niglite Fog Lites. Great Quality Product. **we Paid Full Price For This Product

Mictuning wiring harness for off road led lights is a perfect accessory for off road vehicles, working vehicles and any automobile that could use a relay to power specific equipment. This wiring harness is up to 10 feet and with 2 leads can hook up 2 light fixtures, it is universal fit for any 7" 10" 12" 20" 30" 40" light bars, espcially good for light bar within 180w. For light bar above 180w, we recommend you choose our mictuning heavy duty(hd) wiring harness for better job. Great construction quality wiring material - ul approved. 5 pin on/off rocker switch - can easily turn on/off the lights. Inline blade fuse & 40a relay - multiple safety protection. Universal fit - compatible with all automobiles, boats and devices equipped with a 10-30v power source. Quick & easy install 1. Connect the red+ wire from the fuse to battery +; connect the black wire from the relay to the battery -; 2. Connect the white+; black- wire from the relay to light bar(red/black correspond to the wire of lights bar) ; 3. Connect the red+/black- wire of the switch to battery or any place of your car system to get power for the switch; 4. Turn on on/off button of switch to test the lights bar. Tips:1)if let the harness short circuit the wire would melt, pls let professinal installer to wire it; 2)if you wire the harness to a battery directly, the rocker switch will glowing even when the vehicle is off; if you don't want the switch always glowing after you turned off engine, you can hook the harness to a source on your fuse panel. What you'll get: 1 yr mictuning warranty and lifetime friendly customer service. Package included:1 x wiring harness with 5pin rocker switch, 1 x diagram.

MICTUNING LED Light Bar Wiring Harness - 40Amp Relay Fuse BLUE ON-OFF Rocker Switch REAR LIGHTSMICTUNING-Light-Wiring-Harness-OFF

Mictuning 12ft light wiring harness (101044) FAQ.

Nice Lookin Switches The Illumination Is Great. I Can See Where They Are At Night And They Also Have Another Lite To See When They Are On. I Trimmed A Few Wires And Added To A Few Wires To Complete My Particular Install. It All Depends On Your Vechicle. I Found It Best To Start At The Switch Locations And Work Your Way To The Power Source Ground And See What's Required Next. No Troubles Though You'll Figure It Out. I Highly Recommend This Product -Notice from P. Valdez, Tower Hamlets

Click to Show mictuning 12ft light wiring harness (101044) Details

Too Much Wire! I Had To Shorten It But That's Far Better Than Not Having Enough. The Fuse And Relay Work Great And I Don't Have To Worry About Arcing Out A Switch. These Have Two Led's In The Switch. One Comes On When The Switch Is Activated Lighting Up The Icon And One Lights Up The Writing On The Switch And Is On Either All The Time Or When You Turn On Your Lights - Depending On How It's Wired.

Mictuning-12ft-light-wiring-harness-(101044) set picture

- A. LynetteReliable Wiring Well Constructed And With A Heavy Fuse For Protection. I Purchased And Used Two Of Them With No Fault At All. I Installed With Confidence And Had No Difficulty. I Spliced And Added Additional Wiring To Positive And Negative Wiring With No Incident . . . I Used One Set For 2 Amber 7inch Led Lights And Another Set For Rear Back-up Below Bumper Lights . . . Will Purchase Again For Another Set Of Lights I Will Be Installing.

Switch And Relay Are Great. Works With No Flaw. The Wire That Runs From The Relay To The Light Bar. Is Very Cheap Wire. I Had It Hooked Up And Running A Light Bar. 20" Light Bar At That. I Wired It Up Before I Done The Final Install And Ran The Wires Through The Fire Wall And Those 2 White And Black Wires Got Hot Only After About 5 Min Of Laying In My Garage Floor. Melted Down And Almost Caught Fire Before I Could Hit The Rocker Switch To Turn The Relay Off. I Didn't Expect Perfect High Voltage Or Amperage Wire. But I Did Expect This Product To Perform With Led Light Bars Or Auxiliary Lights. I Ordered 2 Different Ones. One For My Light Bar And One For My Aux Lights. I've Not Wired The Aid Lights Up Yet. I Just Ended Up Cutting The Wires Off Hat Went To The Light From The Relay And Putting My Own Wire In Its Place. Of A Higher Quality. Not Heat In The Wire No Melting. No Nothing. Works Perfect Now.

K. Florence, Hillingdon

MICTUNING LED LIGHT BAR WIRING HARNESS - 40AMP RELAY FUSE BLUE ON-OFF ROCKER SWITCH REAR LIGHTS Featured
Brand :    mictuning
Color :    Rear Lights
Weight :    0.96 pounds
  • Cautions:we recommend professional installation, pls let professinal installer to wire the harness kit; if let the wire short circuit, the harness would melt and even caught a fire, we suggest that wrap all exposed wire with electrical tape to avoid a short circuit; pls make sure your light within power 180w, or it would got melt as well.
  • 10ft extendable wiring harness:up to 10ft of wiring that is plenty of length to put it where you want.
  • Details makes perfect:adopt flexible strand copper wire, up to 180 watt load capacity. it is universal fit for any 7" 10" 12" 20" 30" 40" light bars that is within 180w.
  • Great construction:40a power relay & inline blade fuse for multiple safety protection. with 2 lights output connections, it can hook with 2 led work light or 2 small watt led light bar and any else off road leds.
  • Mictuning 03 series wiring harness kit with 5 pin on/off rocker switch and easy to install.
Price :    $13.99 (was $25.99)
Model :    101044
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (mictuning product review) for MICTUNING LED Light Bar Wiring Harness - 40Amp Relay Fuse BLUE ON-OFF Rocker Switch REAR LIGHTS available as-of ( Nov 2018 )

MICTUNING LED Light Bar Wiring Harness Fuse 40Amp Relay ON-OFF SASQIATCH Rocker Switch Blue 2 Lead

Mictuning wiring harness for off road led lights is a perfect accessory for off road vehicles, working vehicles and any automobile that could use a relay to power specific equipment. This wiring harness is up to10 feet and with 2 leads can hook up 2 light fixtures, it is universal fit for any 7" 10" 12" 20" 30" 40" light bars, espcially good for light bar within 180w. For light bar above 180w, we recommend you choose our mictuning heavy duty(hd) wiring harness for better job. Great construction quality wiring material - ul approved. 5 pin on/off rocker switch - can easily turn on/off the lights. Inline blade fuse & 40a relay - multiple safety protection. Universal fit - compatible with all automobiles, boats and devices equipped with a 10-30v power source. Quick & easy install 1. Connect the red+ wire from the fuse to battery +; connect the black wire from the relay to the battery -; 2. Connect the white+; black- wire from the relay to light bar(red/black correspond to the wire of lights bar) ; 3. Connect the red+/black- wire of the switch to battery or any place of your car system to get power for the switch; 4. Turn on on/off button of switch to test the lights bar. Tips:1)if let the harness short circuit the wire would melt, pls let professinal installer to wire it; 2)if you wire the harness to a battery directly, the rocker switch will glowing even when the vehicle is off; if you don't want the switch always glowing after you turned off engine, you can hook the harness to a source on your fuse panel. What you'll get: 1 yr mictuning warranty and lifetime friendly customer service. Package included:1 x wiring harness with 5pin rocker switch, 1 x diagram.

MICTUNING LED Light Bar Wiring Harness Fuse 40Amp Relay ON-OFF SASQIATCH Rocker Switch Blue 2 LeadMICTUNING-Wiring-Harness-SASQIATCH-Rocker

MICTUNING LED LIGHT BAR WIRING HARNESS FUSE 40AMP RELAY ON-OFF SASQIATCH ROCKER SWITCH BLUE 2 LEAD Overview
Price :    $13.91 (was $15.99)
  • 10ft extendable wiring harness:up to 10ft of wiring that is plenty of length to put it where you want.
  • Great construction:40a power relay & inline blade fuse for multiple safety protection. with 2 lights output connections, it can hook with 2 led work light or 2 small watt led light bar and any else off road leds.
  • Cautions:we recommend professional installation, pls let professinal installer to wire the harness kit; if let the wire short circuit, the harness would melt and even caught a fire, we suggest that wrap all exposed wire with electrical tape to avoid a short circuit; pls make sure your light within power 180w, or it would got melt as well.
  • Mictuning 03 series wiring harness kit with 5 pin on/off rocker switch and easy to install.
  • Details makes perfect:adopt flexible strand copper wire, up to 180 watt load capacity. it is universal fit for any 7" 10" 12" 20" 30" 40" light bars that is within 180w.
Brand :    mictuning
Color :    Sasquatch Lights
Weight :    0.96 pounds
Model :    101035
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (mictuning product review) for MICTUNING LED Light Bar Wiring Harness Fuse 40Amp Relay ON-OFF SASQIATCH Rocker Switch Blue 2 Lead available as-of ( Nov 2018 )

MicTuning MH001 Rocker Switch Holder Panel Housing Kit Fireproof ABS Plastic Black , 1 Pack

This rocker switch housing is made of high quality fireproof abs+pc, fire-protection rating v-0. The precise design guarantees that your rocker switches can be safely and quickly installed on the dashboard of vehicle or boat. This strong bracket gives you unlimited options to mount many extra switches, you can use it to extend your switch panel to meet your needs.

MicTuning MH001 Rocker Switch Holder Panel Housing Kit Fireproof ABS Plastic Black , 1 PackMicTuning-MH001-Housing-Fireproof-Plastic

MICTUNING MH001 ROCKER SWITCH HOLDER PANEL HOUSING KIT FIREPROOF ABS PLASTIC BLACK , 1 PACK Benefits
Brand :    mictuning
Color :    Panel 1PCS
Size :    1Pcs Switch Panel
Weight :    0.2 pounds
Model :    MH001
Quantity :    1
Order click here :    normally ships in 24 hours
  • Mictuning provide you high quality abs + pc fireproof v-0 rocker switch housing, can be used on various vehicles and boats, suv, atv, utv, marine
  • Quantity: 1 pcs rocker switch panel housing
  • This strong bracket gives you unlimited options to mount many extra switches to your vehicle or boat
  • Inner dimension: 1. 50 x 1. 06 x 0. 87 inches color: black plastic abs
Price :    $6.66 (was $8.99)
Automotive Parts And Accessories :    Best Auto Part (mictuning product review) for MicTuning MH001 Rocker Switch Holder Panel Housing Kit Fireproof ABS Plastic Black , 1 Pack available as-of ( Nov 2018 )

Nilight Led Light Bar 2PCS 7 51w 5100LM Black Round Flood Light Pod Off Road Fog Driving Roof Bar Bumper Jeep,SUV Truck , Hunters, 2 years Warranty

Specification: led power: 51w (17 x 3w high intensity led) beam pattern: flood beam, wide light cover the whole lane, extreme useful during the fog days input voltage: 9-30v dc (fits 12v, 24v vehicles) working lifespan: over 50, 000 hours working temperature: -40 85 degrees celsius led color temperature: pure white 6000k-6500k material: 6063 aluminum profile, high quality led chips, pmma lens waterproof rate: ip67; waterproof, dustproof, quakeproof and anti-corrosive. Certifications: ce, fcc and rohs applications: off road lighting: jeep, 4x4, car, atv, utv, suv, truck, trailer, forklift, train, boat, bus, outdoor lighting, etc. Other lighting: excavator, dozer, road roller, crane, tractor, harvester, grain drill, snowplow, fire engine, rescue vehicle, camping, mining, construction lighting, etc. Household lighting: garden, backyard, garage, indoor lighting. (note: use a voltage transformer/converter to convert the ac 110-120v to dc 12v for indoor use. ) note: they are aftermarket parts. Not d. O. T. Approved. Do not use if d. O. T. Is required. For off road use only. Before installing this product, please check your state/provincial and local/municipal laws and regulations. Why choose nilight light? - high quality product and service - 2 year warranty for genuine nilight light bar - most customer s choice -more items options for choice

Nilight Led Light Bar 2PCS 7 51w 5100LM Black Round Flood Light Pod Off Road Fog Driving Roof Bar Bumper Jeep,SUV Truck , Hunters, 2 years WarrantyNilight-5100LM-Driving-Hunters-Warranty

NILIGHT LED LIGHT BAR 2PCS 7 51W 5100LM BLACK ROUND FLOOD LIGHT POD OFF ROAD FOG DRIVING ROOF BAR BUMPER JEEP,SUV TRUCK , HUNTERS, 2 YEARS WARRANTY Reviews
Brand :    nilight
Weight :    9.00 pounds
  • Bright and white: 5100lm/pcs, very bright white ray to illuminate your road in the darkness, see the forward road clearly, which will give you a more safe and comfortable driving experience.
  • Long lifespan: special designed aluminum alloy cooling fins effectively extend the lifespan to over 50, 000 hours
  • Ip 67 rating: heavy duty metal housing is 100% waterproof even in the extreme weather.
  • Package included:2pcs 51w led light bar, 2 sets of mounting barckets, 2-year warranty card
  • Durable design:portability and versatility with a tough, aluminum cover, tough shatterproof pc durable to withstand for any extreme condition
Price :    $46.64
Model :    NI23E-51W
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (nilight product review) for Nilight Led Light Bar 2PCS 7 51w 5100LM Black Round Flood Light Pod Off Road Fog Driving Roof Bar Bumper Jeep,SUV Truck , Hunters, 2 years Warranty available as-of ( Nov 2018 )

MicTuning MH002 2PCS Rocker Switch Holder Panel Housing Kit Fireproof ABS Plastic Black, 1 Pack

This rocker switch housing is made of high quality fireproof abs+pc, fire-protection rating v-0. The precise design guarantees that your rocker switches can be safely and quickly installed on the dashboard of vehicle or boat. This strong bracket gives you unlimited options to mount many extra switches, you can use it to extend your switch panel to meet your needs.

MicTuning MH002 2PCS Rocker Switch Holder Panel Housing Kit Fireproof ABS Plastic Black, 1 PackMicTuning-MH002-Housing-Fireproof-Plastic

MICTUNING MH002 2PCS ROCKER SWITCH HOLDER PANEL HOUSING KIT FIREPROOF ABS PLASTIC BLACK, 1 PACK Advantage
Brand :    mictuning
Color :    Panel 2PCS
Size :    2Pcs Switch Panel
Model :    MH002
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Part (mictuning product review) for MicTuning MH002 2PCS Rocker Switch Holder Panel Housing Kit Fireproof ABS Plastic Black, 1 Pack available as-of ( Nov 2018 )
Price :    $6.99 (was $9.99)
  • Inner dimension: 1. 50 x 1. 06 x 0. 87 inches color: black plastic abs
  • Mictuning provide you high quality abs + pc fireproof v-0 rocker switch housing, can be used on various vehicles and boats, suv, atv, utv, marine
  • This strong bracket gives you unlimited options to mount many extra switches to your vehicle or boat
  • Quantity: 2 pcs rocker switch panel housing

MICTUNING HD 300w LED Light Bar Wiring Harness Fuse 40 Amp Relay ON-OFF Rocker Switch Blue 1Lead

Mictuning heavy duty 1 lead wiring harness is designed and made specifically for high output light bars which has substantially higher amperage draw than its smaller counterparts. It is a perfect accessory for off road vehicles, working vehicles and any automobile that could use a relay to power specific equipment. The mictuning wiring harness is up to 10 feet and with 1 lead can hook with 1 heavy duty off road led light bar above 180w, up to 300 watt load capacity. It is universal fit for any 7" 10" 12" 20" 30" 40" 50" light bars. Great construction quality wiring material - ul approved. 5 pin on/off rocker switch - can easily turn on/off the lights. Inline blade fuse & 40a relay - multiple safety protection. Universal fit - compatible with all automobiles, boats and devices equipped with a 10-30v power source. Quick & easy install 1. Connect the red+ wire from the fuse to battery +; connect the black wire from the relay to the battery -; 2. Connect the white+; black- wire from the relay to light bar(red/black correspond to the wire of lights bar) ; 3. Turn on on/off button of switch to test the lights bar. Cautions:we recommend professional installation, pls let professinal installer to wire the harness kit; if let the wire short circuit, the harness would melt and even caught a fire, we suggest that wrap all exposed wire with electrical tape to avoid a short circuit; pls make sure your light within power 300w, or it would got melt as well. What you'll get: 1 yr mictuning warranty and lifetime friendly customer service. Package included:1 x wiring harness with 5pin rocker switch, 1 x diagram.

MICTUNING HD 300w LED Light Bar Wiring Harness Fuse 40 Amp Relay ON-OFF Rocker Switch Blue 1LeadMICTUNING-Wiring-Harness-Rocker-Switch

MICTUNING HD 300W LED LIGHT BAR WIRING HARNESS FUSE 40 AMP RELAY ON-OFF ROCKER SWITCH BLUE 1LEAD Spotlight
Brand :    mictuning
Color :    Black
Size :    1 Lead
Weight :    1.00 pounds
  • Cautions:we recommend professional installation, pls let professinal installer to wire the harness kit; if let the wire short circuit, the harness would melt and even caught a fire, we suggest that wrap all exposed wire with electrical tape to avoid a short circuit; pls make sure your light within power 300w, or it would got melt as well.
  • 10ft extendable wiring harness:up to 10ft of wiring that is plenty of length to put it where you want.
  • Mictuning heavy duty 1 lead wiring harness with on/off rocker switch and easy to install. our packing is being upgraded, so you may receive the wiring harness in the old packing. both of them are genuine products, please used rest-assured
  • Great construction: 40a power relay and inline blade fuse for multiple safety protection. it is 1 lead that with one lights output connection, it can hook with 1 heavy duty off road led light bar above 180w
  • Details makes perfect: adopt flexible strand copper wire, up to 300 watt load capacity. it is universal fit for any 7" 10" 12" 20" 30" 40" 50" light bars that is within 300w
Price :    $16.99 (was $29.99)
Model :    H408011
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (mictuning product review) for MICTUNING HD 300w LED Light Bar Wiring Harness Fuse 40 Amp Relay ON-OFF Rocker Switch Blue 1Lead available as-of ( Nov 2018 )

mictuning led light bar wiring harness fuse 40amp relay on-off spot light rocker switch blue 2 lead Price : 14.99, was : 25.99 as 2018-06-30
USUKDEFRESITJPCNCAGlobal
United States
Great Britain
German
France
Spain
Italy
Japan
China
Canada
World Wide
Mictuning Wiring Harness Rocker Switch (101039) Reviewed by on jerdus.com

Top mictuning wiring harness rocker switch (101039) Content

The F.A.Q. for mictuning led light bar wiring harness fuse 40amp relay on-off spot light rocker switch blue 2 lead

This makes installation a breeze! i have used 3 of them now and each install has been simple, straight forward, and clean!

A number of questions have been asked here.

Q&A

(0) Question: i got a 2011 tacoma with an extra accessory switch panel. do i need to buy the sleeve or does the switch go right in?


(1) Question: how big is the toggle switch?


(2) Question: does this have two lines, i am going to run fog lights but do not want to splice the 4 wires into 2


(3) Question: what is the length and width of the switch


(4) Question: is there anyway to turn off the blue light on the switch so it doesn't drain the battery?


(5) Question: how far apart will the two leads spread? i have a light on each end of a yj jeep bumper. will the harness reach both lights without modification?


(6) Question: what gauge is this wiring harness?


(7) Question: is the switch waterproof?



(note) Question: where/how to get Mictuning (manufacturer's brand) accessories & similiar Mictuning's products

Answer:

Click the marked text to copy link to Clipboard

Really good kit. Switches are nicely done. The instructions were pretty good but left some wiring choices to your best judgement. The ground wires were not long enough to get back to the battery as recommended in the instructions so addiitonal modifications were needed on the three kits i bought.


Automotive 18148651, Electrical 10692751, Lighting & Electrical 19592751, Replacement Parts 13791751, Wiring Harnesses 13992751Top Mictuning Wiring Harness Rocker Switch (101039) FAQ Content

Best mictuning wiring harness rocker switch (101039) in review

Plenty of wiring, except i needed to splice in more ground wire. Looks great lit up.

H. Wayt, Delaware

You might like to see Cabin filter activated charcoal select bmw like a sponge, the activated charcoal layer embedded in the non-woven material absorbs harmful gases such as nitrogen dioxide, fuels and ozone into pores which are 10, 000 times finer -mann-filter cuk 8430 cabin filter activated charcoal select bmw models
  • Included: Optimum Ventilation Inside The Vehicle Through Low Flow Resistance.
  • Included: Consistent Filtration Performance Throughout The Entire Service Interval.
For Sale Mann-filter Cuk 8430 Cabin Filter Activated Charcoal Select Bmw Models (Auto Part) Cuk 8430 Mann-filter Cuk 8430 Cabin Filter Activated Charcoal Select Bmw Models (Mann
Or you might like to consider Medium strength threadlocker , 6 permatex medium strength threadlocker blue formula is an all-purpose threadlocker ideal for all nut and bolt applications 6mm to 20mm. eliminating the need for stocking expensive lock -permatex 24200 medium strength threadlocker blue, 6 ml
  • Properties: Protects Threads From Corrosion.
  • Properties: Ideal For All Nut And Bolt Applications 1/4" To 3/4" (6mm To 20mm).
Most Wishlist Permatex 24200 Medium Strength Threadlocker Blue, 6 Ml (Auto Accessory) 24200 Permatex 24200 Medium Strength Threadlocker Blue, 6 Ml (Auto

V. Rhonda, Utah says

Wiring directions could be a little more clear. Overall good product

O. Erickson, Oxfordshire

Overall 5 stars, the rocker fit perfectly in my dash, not cutting required, the directions were a little sketchy but i got it wired up with a little altering

T. Wells, Prince Edward Island says

The wiring works great easy hookups and directions work exactly as directed. And both switches to both my 2 sets of lights work perfectly. I would recommend the switches and the harnesses to anyone wiring to a jk unlimited. Thank you. Junkman01

Y. Mathis, Lewisham

More than whats needed for most leds, just count your wattage needs plus 10 to 15% for safety & you'll be good to go. Thanks bill in w. V.

U. Hadley, Prince Edward Island says

Nice

P. Reed, Salford

So far holding up great do have the annoying issue of the light switch being on at all times but it is an led and isnt drawing much. It can be rewired from switch to the dash interior lights but i have not done that so cant faulty them. I do wish they had a little mroe detail for that portion. Other than that didnt have a problem wit these fitting a 2003 tahoe.

Y. Lisa, Dorset says

Very nice harness and i really like the function indicating rockers.

K. Russell, Picardie

Great instructions and easy to mount.

T. Gloria, Nordrhein-Westfalen says

Great wiring harness with cool rocker switches. Comes with everything you need to get your lights going. Just bought my second harness to wire up another set of lights on my rhino

Q. Wade, New York

Replacing an existing harness that was a real pos. This unit was the real deal. Long enough and well made. Follow the instructions and you won't be disappointed.

W. Jarvis, Northwest Territries says

Wiring harness works perfectly for the 2 18watt spotlights that i installed. I installed this on a dodge ram 1500 and there was plenty of wiring!

M. Anonymous, West Sussex

This is a great wiring harness and everything is includdd to get you up in running. I was able to install on my truck in under 30 minutes. There's plenty of length to run from. Your lights to inside the cab of your vehicle and the included rocker switch was top notch. Great product!



Leave a Reply

You must be logged in to post a comment.


Top led light bar wiring harness fuse Review Content

Related Products

Product Image Gallery

Top-mictuning-wiring-harness-rocker-switch-31940qyiz890-Content