Mopar Molded Splash Guards Without (Auto Accessory) 5479

Review for dodge ram truck molded splash

Price was $84.76. I am glad i got these mud flaps. They are making the different with the snow and mud. They fit very well. Did not take long to install but still had to drill one extra hole and had to get a different screw for the back flaps.

-B. Fabian

Dodge ram truck molded splash guards trucks out fender flares mud flaps front rear set front & rear (4 total) genuine mopar splash guards for 2009 – 2014 dodge ram 1500 2010 – 2014 dodge ram heavy duty 2500 2010 – 2014 dodge ram heavy duty 3500 single rear wheel will -dodge ram truck mopar molded splash guards trucks out fender flares mud flaps front rear set 4

  • Advantage: 2010 – 2014 Dodge Ram 2500.
  • Advantage: 2010 – 2014 Dodge Ram 3500 Single Rear Wheels.

Most Wishlist Mopar Molded Splash Guards Without (Auto Accessory)

Buy Now

Preamble

Installed these today on my 2015 ram 2500 megacab laramie limited. The installation went fine. . First the front. You have to remove some small plastic guards, saving the screws that you removed. You will also remove one plastic stay. Then for a 2500 you have to cut a piece off of the new splash guard. I used a razor knife and it cut quite easily. Just be careful and go slow. Then you use the two screws you removed to attach into the original holes. You use a supplied lag bolt (with a plastic head) to go into the hole where the plastic stay was located. I loosely attached the two screws and then did the lag bolt and tightened. It assembled fine with my full length step bars. . Then the back. Here you remove the small plastic guard again, saving the two screws and discarding the two plastic stays. Then on the bottom undercarriage there is a 3rd screw that is tightened into the frame but not holding anything. Unscrew that too. Then you attach the new splash guard using these 3 screws. This time i attached the top screw loosely, then attached the undercarriage screw loosely. I then attached the bottom screw and tightened. . I should mention that the directions have you drill and install another screw. I wasn't going to drill into my body unless it was necessary. I really don't think it's needed based upon my install. I will update if there's an issue after having them installed for awhile, but i don't expect any issues. . Hope this helps. The Best dodge ram truck molded splash as-of ( Dec 2018 ) | Mopar-Auto Accessory Review Advantage Dodge Ram Truck Mopar Molded Splash Guards For Trucks Without Fender Flares Mud Flaps Front and Rear Set of 4 Mopar 82211228, mopar, mopar splash guard ram, ram splash guard, dodge ram splash guard. 2010 - 2014 dodge ram 2500. 2010 - 2014 dodge ram 3500 single rear wheels. Will not fit trucks with fender flares or laramie models. Will not fit trucks with side steps or running boards .

Dodge Ram Truck Mopar Molded Splash Guards For Trucks Without Fender Flares Mud Flaps Front And Rear Set Of 4 Review (82212287ac 82211228)

I purchased this product from quirk chrysler dodge jeep via online store. It was shipped out from massachusetts and received in michigan three days after ordering. These look like they were installed on my new 2013 ram 1500 at the factory, and are designed to also replace the plastic stone chip guards that are standard factory equipment. The required drilling is minimal, one 3/32 hole drilled through an already drilled spot in each guard. I did not have to remove the back tires to drill the rear holes because i used an electric 3/8" right angle drill, which can be had for around $24 at the local cheap import tool outlet. The pictograph instructions are very clear and installation is intuitive if one takes their time. These install like they were specifically made for the truck (which they were), are built of heavy materials in canada, and deal cleanly with the issue of the factory installed stone chip guards. No reason to install anything else on your new ram 1500. -N. Mahood

Mopar Molded Splash Guards Without

  • Brand: Mopar
  • EAN: 0617689702691
  • Product Dimensions:
    Height:12.00 inches
    Length:24.00 inches
    Weight:1.50 pounds
    Width:12.00 inches
  • LegalDisclaimer: NEW OEM MOPAR
  • Manufacturer: Mopar
  • Warranty-Part: Parts
  • MPN: 82212287AC / 82211228
  • Total: 2
  • Quantity: 1
  • Part/Serial Number: 82212287AC / 82211228
  • Sub-Type: Automotive Parts And Accessories
  • Category: AUTO ACCESSORY
  • UPC: 617689702691

dodge ram truck molded splash guards trucks out fender flares mud flaps front rear set Automotive Parts And Accessories, Front & rear (4 total) genuine mopar splash guards for 2009 - 2014 dodge ram 1500 2010 - 2014 dodge ram heavy duty 2500 2010 - 2014 dodge ram heavy duty 3500 single rear wheel will not fit laramie models or trucks with fender flares. will not fit trucks with mopar side steps. will not fit dual rear wheel trucks. fits regular, quad cab and crew cab single wheel models. they provide excellent lower body protection and accent the trucks styling. also keeps the area under the door entry step clean and saves the paint as well. constructed of extremely durable composite tpo plastic and tpr rubber. features a ram's head logo molded into the splash guard. includes instructions and all mounting hardware. Mopar Molded Splash Guards Without (-Mopar).

Mopar Molded Splash Guards Without Automotive Parts And Accessories

dodge ram truck molded splash Dodge Ram Truck Mopar Molded Splash Guards For Trucks Without Fender Flares Mud Flaps Front and Rear Set of 4 (Switch to Mobile/Desktop Version)

Had them about a year now. They installed super easy and really set off the look of the truck with the ram logo. One did crack but that was more than likely my fault with running into something.

Dodge Ram Truck Mopar Molded Splash Guards Trucks Out Fender Flares Mud Flaps Front Rear Set 4
Click to see NoticeMopar Molded Splash Guards Without (Auto Accessory)"Fits perfect!"


Car Console Covers Plus Fits Dodge Ram 2014-2019 Officially Licensed Embroidered Truck Armrest Console Cover Center Console Lid Black This Cover Will FIT The Bucket Seats Jump SEAT Console

Live hard! play hard! and don't mess up your center console! protects against stains, odor, perspiration, spills, and scratches. A stylish way to protect, renew and add comfort to your ram truck. Comes with ram logo only no writing .

Car Console Covers Plus Fits Dodge Ram 2014-2019 Officially Licensed Embroidered Truck Armrest Console Cover Center Console Lid Black This Cover Will FIT The Bucket Seats Jump SEAT ConsoleCar-Console-Covers-Plus-Embroidered

CAR CONSOLE COVERS PLUS FITS DODGE RAM 2014-2019 OFFICIALLY LICENSED EMBROIDERED TRUCK ARMREST CONSOLE COVER CENTER CONSOLE LID BLACK THIS COVER WILL FIT THE BUCKET SEATS JUMP SEAT CONSOLE Benefit
Price :    $29.95
  • High quality, soft & washable 100% cotton terry velour
  • Convenient sleeve pocket holds all your quick-grab items
  • Designed with your favorite ram logo
  • Renews old and protects new consoles from damaging effects from heat and cold, stains and pets
  • Easy slip-on installation, no tools required
Brand :    car console covers plus
Color :    Black
Model :    EMB C2RAM BLACK
Quantity :    1
Order click here :    normally ships in 1-2 business days
Automotive Parts And Accessories :    Best Auto Accessory (Automotive Parts And Accessories product review) for Car Console Covers Plus Fits Dodge Ram 2014-2019 Officially Licensed Embroidered Truck Armrest Console Cover Center Console Lid Black This Cover Will FIT The Bucket Seats Jump SEAT Console available as-of ( Dec 2018 )

APS iBoard Running Boards 5 Custom Fit 2009-2018 Ram 1500 Crew Cab Pickup 4Dr & 2010-2018 Ram 2500/3500 Nerf Bars Side Steps Side Bars

Shipped fast, this is a very complete kit. One of the reviews mentioned having to modify the driver side front bracket if a body brace was present. This kit seems to have been adjusted to avoid that case as the front driver side bracket mounts slightly differently than the rest. The instructions are a little hard to follow however there are a few youtube videos that made the installation process very easy to follow. Overall this seems to be a very solid kit. Love the low profile look of the running boards and they feel very solid. The whole installation process took approximately 90 minutes. I would absolutely purchase these steps again.

Fitment 2009-2018 dodge ram 1500 crew cab pickup 4-door2010-2018 dodge ram 2500 crew cab pickup 4-door2010-2018 dodge ram 3500 crew cab pickup 4-door2010-2018 dodge ram 4500 crew cab 4-door 2010-2018 dodge ram 5500 crew cab 4-door package content iboard, by aps is a new generation of running boards designed to look and feel different. Most running boards in the market are round or oval. Iboard's flat profile design is clean and modern - giving your truck a truly distinct look. Introduction iboard, by aps is a new generation of running boards designed to look and feel different. Most running boards in the market are round or oval. Iboard's flat profile design is clean and modern - giving your truck a truly distinct look. The iboard's low profile design is so unique even your dealer will be asking you where you got them from. The iboard's aircraft grade aluminum and heavy duty brackets can support up to 300 lbs without bending. The iboard is sturdy, comfortable, and durable. Its ridged rubber top provides a solid, non slip and continuous footing along the entire length of the bar. Which means these running boards will give you unparalleled access to your truck's windshield, roof top and truck bed. Most diyers will find the iboard incredibly easy to install. Even people who aren't otherwise mechanically inclined have installed these running boards in under an hour. Installation instructions, brackets, and all the required hardware are included in your package. Don't hold back from installing these yourself. Cleaning them is even easier, just give them a good wash with the garden hose and they will look good as new. This sure beats having to spray or oil down stainless steel running boards that require delicate non abrasive cleaners. The proof is in the pudding, read our many 5 star reviews to see for yourself.

APS iBoard Running Boards 5 Custom Fit 2009-2018 Ram 1500 Crew Cab Pickup 4Dr & 2010-2018 Ram 2500/3500 Nerf Bars Side Steps Side BarsAPS-iBoard-Running-2009-2018-2010-2018

Iboard Running Boards 2009 2017 2010 2017 (Aps) FAQ.

Great product for the price. They went on easily (about 90-minutes) and are nice and secure (little bend, even with my 265lb frame). This product would have a perfect score if the following conditions were met. . 1. If the braces holding the steps had some form of composite covering hiding the metal. It simple aesthetics. Basically, something to hide the metal and look a little thicker. This, and it would prevent rust. 2. If the screws under the boards were also black and not gold colored. Toss some glue on plastic covers into the package or just get black screws. When i can see the gold hardware hanging down under the step, it cheapens the product, but i'm probably the only one seeing this. . Quick installation, good quality, and good looking. With just a few tweaks, this would be a perfect product. -Notice from K. Russell, Camden

Click to Show iboard running boards 2009 2017 2010 2017 (aps) Details

Installed these on my 2016 ram 1500 crew cab. . To my surprise the kit included an alternate bracket for the left front driver mounting position -which for 2016 rams did not agree with a factory installed bracket. Also included was the necessary m8 1. 25 30mm bolts for the factory pre-installed (frame) nuts, there are two you will use for the front brackets (one each left and right). Having read many reviews previous -i purchased the m8 1. 25 30mm bolts from hdep in advance -but i am happy to return them. . "no cutting of the front driver bracket" was necessary, as others have had to do. The instruction manual also indicated "2016" models in the assembly steps. . Once the driver side was installed, the passenger side was a snap - about 20minutes tops. . The steps have a rubberized top side, and provides traction under the foot when you step on it. The whole assembly does give a hint of "flex" but nothing to worry about. I weight 180, and the flex was minimal. . The mounting hardware (nuts and bolts) is somewhat visible. I will address this with a shot of black paint (no big deal). . I did mount the boards with the front aligning to the front door edge (fender line), which gave me four additional inches aft of the cab -near the bed. This works for me as it gives me step space near the rear wheel (but not fully). . Overall, satisfied with the product, the online store price and prime service.

Iboard-running-boards-2009-2017-2010-2017-(aps) set picture

- I. DonnaI almost didn't buy this product because of several reviews saying that it didn't fit 2016 ram but then i decided to gamble and i'm glad i did. It fit my 2016 ram 1500 crew cab perfectly without any modifications. Directions could be a little better but if you take your time to organize all the parts that come with the package it is a pretty simple process. I was able to install it in 1. 5 h by myself and i love the clean look that it gives to te truck. The boards seem pretty sturdy ( i weight 250 lb and i can step on it without any problems) i would definitely recommend this product and the price in my opinion is very competitive for the product.

Great product. Sturdy, doesn't bow. Wide step and nice drop and nice distance away from cab make this product perfect for stepping in and out of the truck. Directions for installation are confusing and the pictures are not very good. I recommend watching this video for help on the install, it's how i figured out how to do this, otherwise, i would have been completely lost. Also, the elongated oval holes are covered by tape, so don't freak out, the holes are already factory installed, just under some tape :). . Https://www. Youtube. Com/watch? v pixmsgm3okk

U. Joanne, Bedfordshire

APS IBOARD RUNNING BOARDS 5 CUSTOM FIT 2009-2018 RAM 1500 CREW CAB PICKUP 4DR & 2010-2018 RAM 2500/3500 NERF BARS SIDE STEPS SIDE BARS Spotlight
Brand :    aps
Color :    Silver
Size :    5 Inches
Model :    IB-D5208A
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (aps product review) for APS iBoard Running Boards 5 Custom Fit 2009-2018 Ram 1500 Crew Cab Pickup 4Dr & 2010-2018 Ram 2500/3500 Nerf Bars Side Steps Side Bars available as-of ( Dec 2018 )
Price :    $198.95 (was $282.58)
  • Solid running board - 100% aircraft grade 6061-t6 aluminum build, iboard side steps offer the best in corrosion protection, durability, and strength (300 lbs load capacity)
  • Unique look & design- upgrade your truck's style with iboard's clean, low profile design and look different with iboard's silver aluminum finish
  • Full coverage step pad - 5" wide corrugated rubber step pad covers the entire running board, providing a secure, slip-proof, comfortable step for the whole family
  • Easy to install rocker panel mount (drilling may required on some models) and custom fit for your: 2009-2018 ram 1500 crew cab pickup 4dr & 2010-2018 ram 2500/3500
  • Package includes: (2) iboard running boards, mounting brackets and hardware kit for an easy diy install

Auto Ventshade 322004 Aeroskin Flush Mount Dark Smoke Hood Protector 2009-2018 Dodge 1500 Excludes Sport & Rebel 2019 Ram 1500 Classic

Avs aeroskin, designed to flow with the contours of your vehicle's hood, create a sleek, stylish profile, flush mounting to your hood. This custom-molded hood shield is made in the usa and precision-engineered to fit your vehicle s hood perfectly. Avs aeroskin s low-profile and skin-tight fit provide excellent hood and windshield protection from the hazards of the road. The durable, yet flexible material makes this accessory wear-and-tear resistant as well as car-wash-safe.

Auto Ventshade 322004 Aeroskin Flush Mount Dark Smoke Hood Protector 2009-2018 Dodge 1500 Excludes Sport & Rebel 2019 Ram 1500 ClassicAuto-Ventshade-322004-Protector-2009-2018

AUTO VENTSHADE 322004 AEROSKIN FLUSH MOUNT DARK SMOKE HOOD PROTECTOR 2009-2018 DODGE 1500 EXCLUDES SPORT & REBEL 2019 RAM 1500 CLASSIC Highlight
Brand :    auto ventshade
Color :    Smoke
Weight :    3.80 pounds
Model :    322004
Quantity :    1
Order click here :    normally ships in 1-2 business days
  • Proudly made in the usa and backed by a limited lifetime warranty
  • Made of durable, yet flexible acrylic material with a smoke finish
  • Custom-molded and precision engineered to fit your vehicle's hood perfectly
  • Mounts directly to your hood with double-sided 3m tape, no drilling required
  • Provides excellent hood and windshield protection from the hazards of the road
Price :    $38.99
Automotive Parts And Accessories :    Best Auto Accessory (Automotive Parts And Accessories product review) for Auto Ventshade 322004 Aeroskin Flush Mount Dark Smoke Hood Protector 2009-2018 Dodge 1500 Excludes Sport & Rebel 2019 Ram 1500 Classic available as-of ( Dec 2018 )

Dodge Ram Chrome Valve Stem Caps - Black

Genuine dodge ram tire valve stem caps made of durable abs plastic to set your wheels off. Each cap is chrome plated with the emblem on the top. You want durable plastic and not metal caps for many reasons: no seizing, no affect on tire balancing & no affect on your tire pressure monitoring system (tpms). The set of 4 caps are clam shell packaged which also makes them perfect for gift giving. Made in usa.

Dodge Ram Chrome Valve Stem Caps - BlackDodge-Chrome-Valve-Stem-Caps

DODGE RAM CHROME VALVE STEM CAPS - BLACK Features
Brand :    dodge
Color :    Chrome
Model :    RAM000
Quantity :    4
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (Automotive Parts And Accessories product review) for Dodge Ram Chrome Valve Stem Caps - Black available as-of ( Dec 2018 )
Price :    $14.85
  • Why plastic? no seize, no affect on tire balance & no affect on your tpms
  • Clam shell packaged. perfect for gift giving
  • Chrome plated abs plastic w/ dodge ram emblem
  • Set of 4 caps. licensed by dodge. made in the usa
  • Dodge ram tire valve stem caps

AntennaMastsRus - The Original 6 3/4 INCH Works Dodge Ram Truck 1500 2009-2019 - Short Rubber Antenna - Reception Guaranteed - German Engineered - Internal Copper Coil

Your mast broken, deteriorating, stolen or bent? looking for an antenna to get rid of that obnoxiously tall un-stylish antenna your vehicle comes with? looking for the best reception short antenna on the market? then look no further, this is the antenna solution for you! one must note that there is a surplus of short antenna options available but none of them provide anything but frustration! our experience with any and all short antennas are that they look cool but you lose close to all radio functionality. So this set us out on a mission, to design a short antenna that actually performs. Well, we are excited to announce that we have over exceeded our goals and now offer a short antenna that will perform closer to the factory antenna than ever before! this is not just a claim; we have actually tested this antenna on an array of different vehicles. Due to our confidence in this antenna we are offering a money-back guarantee, if you're not 100% satisfied with performance return your antenna for a full refund! antenna ships with the highest quality stainless steel threading, no corners were cut with design with this antenna.

AntennaMastsRus - The Original 6 3/4 INCH Works Dodge Ram Truck 1500 2009-2019 - Short Rubber Antenna - Reception Guaranteed - German Engineered - Internal Copper CoilAntennaMastsRus-2009-2019-Reception-Guaranteed-Engineered

ANTENNAMASTSRUS - THE ORIGINAL 6 3/4 INCH WORKS DODGE RAM TRUCK 1500 2009-2019 - SHORT RUBBER ANTENNA - RECEPTION GUARANTEED - GERMAN ENGINEERED - INTERNAL COPPER COIL Advantage
Brand :    antennamastsrus
Color :    Black
Size :    6 3/4" Inch - PREMIUM CHOICE
Model :    A010-FD2-8
Quantity :    1
Order click here :    normally ships in 24 hours
Car Audio Or Theater :    Best Car Electronics (antennamastsrus product review) for AntennaMastsRus - The Original 6 3/4 INCH Works Dodge Ram Truck 1500 2009-2019 - Short Rubber Antenna - Reception Guaranteed - German Engineered - Internal Copper Coil available as-of ( Dec 2018 )
Price :    $17.99 (was $24.99)
  • 1 best reception short antenna on the market! money-back guarantee! if your not 100% satisfied with performance, return your antenna for a full refund!
  • Fits: 2009-2019 dodge ram truck 1500
  • 6 3/4" german engineered antenna. highly conductive copper internals, aids in superior reception.
  • Stainless steel threading; made in the u. s. a. !
  • Order before 2pm cst, same day shipping from wisconsin! 1 year warranty!

2013-2017 Ram 1500 Quad Cab Front Rear All Weather Mats

All-weather style floor mats are molded in color and feature deep ribs to trap and hold water, snow and mud to protect your carpet and keep it clean. A must during inclement weather. Also known as slush mats, they work great in all seasons.

2013-2017 Ram 1500 Quad Cab Front Rear All Weather Mats2013-2017-1500-Quad-Front-Weather

2013-2017 RAM 1500 QUAD CAB FRONT REAR ALL WEATHER MATS Reviews
Brand :    mopar
Color :    Black
Model :    mj-13402/13406
Quantity :    4
Order click here :    normally ships in 24 hours
  • Genuine oem mopar accessory
  • Front and rear set of 3 (one piece rear) black. heavy duty slush mats
  • Fits the 2013 to 2017 ram 1500 quad cabs
  • Black with ram head logo
Price :    $118.99
Automotive Parts And Accessories :    Best Auto Accessory (mopar product review) for 2013-2017 Ram 1500 Quad Cab Front Rear All Weather Mats available as-of ( Dec 2018 )

Genuine Dodge RAM Accessories 82208454AB Hitch Receiver Plug RAM's Head Logo

Fits perfectly on my class iii receiver . Looks better than the gapping hole when the hitch is off my truck. Pliable rubber, looks like it will last a long time. I like it.

Receiver plugs protect your vehicle's hitch opening from the elements. Includes a retention strap, four-way wiring plug holder and a jeep, ram, fiat or mopar logo. Made from santoprene material, the hitch plug will not shrink, harden, crack, chalk or discolor.

Genuine Dodge RAM Accessories 82208454AB Hitch Receiver Plug RAM's Head LogoGenuine-Dodge-Accessories-82208454AB-Receiver

Genuine Dodge Accessories 82208454ab Receiver (Auto Accessory) FAQ.

Exactly as described! keeps debris out when the receiver is not attached. Also looks great as well. ! avoid the "stealership" for this item! i have had a couple oil changes on my pickup at the "dealership" aka "stealership" just to be in good standing with the manufacturer warranty. Well long story short, decided to walk over to the parts department for this item and they wanted twice the money. ! i received this from online store and it's the exact same oem part. ! point is, save your money and shop here! thanks -Notice from A. Cindy, Blackburn with Darwen

Click to Show genuine dodge accessories 82208454ab receiver (auto accessory) Details

Nice hitch plug with a retainer ring so you won't lose it. . Double bonus on the ram logo!

Genuine-dodge-accessories-82208454ab-receiver-(auto-accessory) set picture

- J. MaysSolid build. Snug fit. No one has bothered it so far. Looks great.

Like that it was a tight fit with a strap to hold it when using the hitch. Was looking for something with the ram emblem since i had no preference for something else. Would have liked to have one with the extra brake light but could not find one on the reviews that did not have some issue.

T. Eva, Dudley

GENUINE DODGE RAM ACCESSORIES 82208454AB HITCH RECEIVER PLUG RAM'S HEAD LOGO Benefits
Brand :    genuine dodge
Weight :    0.2 pounds
Model :    82208454AB
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (genuine dodge product review) for Genuine Dodge RAM Accessories 82208454AB Hitch Receiver Plug RAM's Head Logo available as-of ( Dec 2018 )
Price :    $13.62 (was $15.41)
  • Fits 2 inch hitch receiver with ram's head logo
  • Made from santoprene material. hitch plug will not shrink, harden, crack, chalk or discolor
  • Protects your vehicle's hitch opening from the elements
  • Fits: 2005-2011 dakota, 2011-2012 ram
  • Includes a retention strap, four-way wiring plug holder

MaxMate Custom Fit 2009-2018 Ram 1500 Crew Cab/2010-2019 Ram 2500/3500 Crew Cab 4 inch Oval Stainless Steel Side Step Rails Nerf Bars Running Boards 2pcs Mounting Bracket Hardware Kit

Purchased feb 2016 for my 2016 ram installed them in about 2 hours after receiving them, the steps have done their job of helping both of us to get into the truck but a big but now less than 6 months they all of a sudden decided to pit and rust, the truck only has 3600 miles on it, truck gets washed and hand dried by me. We took truck to northern part of michigan last week upon our return i took it for a car wash as i was drying the truck noticed some brown on the steps rear of drivers side and from front door to bed of truck on passenger side more brown spots large to small and every size in between, product came with instructions to wax the steps which i have done several times now this rust and pitting on the steps is unacceptable, i am going to contact the seller to see what type of warranty these things have, i believe this should not of happened to this product since it is not that old

Our step bars are made by oe standard qualified manufacturer. The bars provide custom-built style heavy duty protection and easier access to your pickup suv and jeep on both driver side and passenger side. Fitment:09-18 ram 1500 crew cab & 10-19 ram 2500 / 3500 crew cab

MaxMate Custom Fit 2009-2018 Ram 1500 Crew Cab/2010-2019 Ram 2500/3500 Crew Cab 4 inch Oval Stainless Steel Side Step Rails Nerf Bars Running Boards 2pcs Mounting Bracket Hardware KitMaxMate-2009-2018-2010-2019-Stainless-Mounting

Maxmate 2009 2018 Stainless Mounting Hardware (wb2d41127) FAQ.

I was looking for a set of running board for my truck when i found these. Reading some reviews, i decided to give these a try. . The running boards arrived in excellent condition, no dings, scrapes, scratches, or rust. . The installation was pretty quick. You just need to take the time to read the directions carefully before you start and sort your parts out. . They have been on the truck for over a year now and could not be happier with my purchase. They are extremely well built. Installation was quick and easy. They even look clean when the truck has not been washed in a few weeks. (see photos) i have had no issues with quality, rust, or any other problems. The off-set is the right height for my family to get in and out of the truck with no issues. The step is comfortable for me to maneuver in and out. It is also handy to use to get to the inside of the bed close to the cab. -Notice from Q. Widmer, West Virginia

Click to Show maxmate 2009 2018 stainless mounting hardware (wb2d41127) Details

To start i have a 2013 ram 1500 crew cab laramie. I installed these last night. Now that i am calmed down - they look awesome and fit awesome! they are real strong. Love them! they are for sure 5 stars. But! big but! the directions absolutely suck! i ended up putting on and taking off brackets, figuring out which brackets go on which side, front brackets, middle brackets, back brackets, changing bolts/washer/nuts and generally trying to figure out how the f to get the damn things on. I was so pissed by the time i got them on that it took away from my excitement. I am taking away a star because of this and should actually take 2 away! manufacturer - get with the program! how hard is it to is it to be more clear in your directions if you have such a nice product!

Maxmate-2009-2018-stainless-mounting-hardware-(wb2d41127) set picture

- F. AllenI bought these fully aware that they could rust or get filled with water. They arent too bad. Came together in one big box. No dents, no missing hardware. Each bar is wrapped in different color plastic and labeled accordingly. Same with the brackets. Had them hand tightened in about 30 min. I did watch some you tube videos, though, so i knew what i was getting into. I had enough room for mudflaps. Maybe a 1/2" gap. Hardware and brackets seem pretty sturdy. They mount into preexisting holes in the body that are covered by tape at the factory. All hardware matched for me. Nothing labeled wrong. If your truck was setup for factory side steps, all holes will line up, but your truck will already have a threaded insert at one hole, so you would need a different bolt for that one. My was not setup up for factory, so i was good. Now on to the design flaw that is probably causing the rust and water for everyone. 1st the plastic steps. They are not sealed well enough. Underneath the steps, the metal is bent inward, the steps the are connected to the bottom of this "dent" with rivets and plastic rods molded into the back of the step. While this keeps the plastic step in place. It is not airtight. I have no doubt in my mind that if water is present, that water works its way in there. Especially at driving speeds when it is raining or wet and even the car wash. Since it has nowhere to go. The steps slowly fill up with water. I, hopefully, fixed this by prying up the plastic step a little bit and forcing some "great stuff" expanding foam insulation to waterproof it. Only had the steps a couple of weeks, but have already got a ton of rain. Time will tell. The other flaw, the hardware that attached the bottom of the sidestep to the bracket. Potential water entry there. I just put a rubber washer under the other washers. Hopefully that prevent water from that. As for hardware rusting complaints. Havent had long enough to notice. As long as the black brackets, stay black, i honestly could care less if the bolt heads rust a bit. They are under the truck. Out of sight, out of mind; )

Ordered these for my new 2014 dodge ram. Couldn't afford the "factory" ones. Read the reviews on here and took a chance. Got them in 2 days (prime). Bars had zero dings in them. I don't understand the reviews about the instructions being difficult of lacking. I only read the instructions looking for torque values. There aren't any, but just looking at the parts listing it shows which brackets are for which side and which are front, middle, and rear. Had them put on in 40 minutes. They look great and i have had them for a week now and they are awesome. I can recommend these to anybody who is interested.

S. Carol, Newcastle upon Tyne

MAXMATE CUSTOM FIT 2009-2018 RAM 1500 CREW CAB/2010-2019 RAM 2500/3500 CREW CAB 4 INCH OVAL STAINLESS STEEL SIDE STEP RAILS NERF BARS RUNNING BOARDS 2PCS MOUNTING BRACKET HARDWARE KIT Advantage
Brand :    maxmate
Color :    Chrome
Size :    4 inch
Model :    WB2D41127
Quantity :    2
Order click here :    normally ships in 24 hours
  • Important: only fit crew cab with 4 full-size doors. not for quad cab. not for mega cab. (please check the cab size image above).
  • Step bars are made of heavy duty 4 inch oval stainless steel tubing with welded stainless steel end caps!
  • Uv resistant non-slip wide step pads.
  • Easy no-drilling diy installation in minutes.
  • 100% brand new 2 bars for both driver & passenger sides. all mounting hardware and diy instruction included.
Price :    $143.00
Automotive Parts And Accessories :    Best Auto Accessory (maxmate product review) for MaxMate Custom Fit 2009-2018 Ram 1500 Crew Cab/2010-2019 Ram 2500/3500 Crew Cab 4 inch Oval Stainless Steel Side Step Rails Nerf Bars Running Boards 2pcs Mounting Bracket Hardware Kit available as-of ( Dec 2018 )

Dee Zee DZ43301 Truck Tailgate Assist

Great Product! Couple Of Tips: First When In Installing The Nutsert Don't Remove The Bearing Race! I Did This At First And Quickly Realized That It Allows The Nutsert To Spin Around Inside The Tailgate Housing Which Is Probably Why You've Read Some Reviews Stating That Epoxy Was Used Or Some Kind Of Wedge To Keep It From Spinning. Don't Need To If You Leave The Nutsert Pre-assembled As Is. Second Instead Of Removing The Cable Limiter Entirely On The Tailgate Side I Snapped Off The 90 Degree Tab Which Is The Actual Limiter And Then Ground Down And Filed The Burr Smooth. So In Essence I'm Left With A Washer Helps To Keep The Factory Spacing. I Also Used Some Of The Left Over Thread Lock On This Bolt As Well.

This fits: dodge ram 1500 pickup 2009 - 2010 sport , dodge ram 1500 pickup 2009 - 2010 laramie , dodge ram 1500 pickup 2009 - 2010 slt , dodge ram 1500 pickup 2009 - 2010 st , dodge ram 1500 pickup 2009 - 2010 trx , dodge ram 1500 pickup 2009 - 2010 trx4 , ram 1500 2011 - 2014 sport , ram 1500 2011 - 2014 laramie , ram 1500 2011 - 2014 outdoorsman , ram 1500 2011 - 2014 big horn , ram 1500 2013 - 2014 express , ram 1500 2011 - 2014 laramie longhorn , ram 1500 2011 - 2014 slt , ram 1500 2013 - 2014 hfe , ram 1500 2013 - 2014 laramie limited , ram 1500 2013 - 2013 r/t , ram 1500 2014 - 2014 special service , ram 1500 2011 - 2014 st , ram 1500 2011 - 2014 sxt , ram 1500 2011 - 2014 tradesman , ram 1500 2012 - 2012 tradesman hd , ram pickup 1500 2012 - 2012 outdoorsman

Dee Zee DZ43301 Truck Tailgate AssistDee-Zee-DZ43301-Tailgate-Assist

Dee Zee Dz43301 Tailgate Assist Shock (Auto Part) FAQ.

Installed This On A 2014 Ram 1500. It Works Exactly As Described. I Am Very Happy With It. It Is Strong Enough That After Pulling The Handle On The Tailgate It Comes Down Slowly Without Even Having To Hold It. Not Too Slow And Not Too Fast. Just Right In My Opinion. Installation: It Took Me About 20 Min. All In All. The Instructions Are Very Easy To Understand And To Follow. The Reason For 4 Stars: I Had To Fiddle With The So Called "nutsert" Tool A Bit That Comes With The Kit. I Had To Hold The Insert With Needle Nose Pliers To Keep It From Turning While Turning The Nut With The Wrench (see Instructions). Once The Insert Started To Squeeze I No Longer Had To Hold It With The Pliers And Could Proceed As Described In The Instructions. Other Than That No Problem At All. Also The Instructions Say That This Can Only Be Installed On The Driver Side. I Do Not See A Reason Why It Couldn't Be Installed On The Passenger Side Also If One Would Want To Do That For Some Reason. (i Think One Is Just Enough I Would Not Necessarily Recommend Installing Two Anyway As That Might Be Too Much And The Tailgate Might Not Lower By Itself Anymore. ) Needless To Say I Do Recommend This. Update: 1/1/2017: The Ball-point Bolt That Screws Into The "squeeze-nut" Insert In The Tailgate Kept Coming Loose Over Time. I Tried Re-tighten And Even Loctite But It Kept Coming Lose Until The Entire "sceeze-nut" (not Sure What The Proper Name For It Is) Fell Apart Inside The Tailgate - Great!. I First Tried Fixing It By Buying The Same Squeeze Insert But It Immediately Failed On Install. However I Fixed It By Using A Barrel Nut From The Hardware Store Slightly Filed On End Of The Barrel Nut Round And Smooth So I Could Insert It Into The Fairly Large And Elongated Hole In The Tailgate. I Put Some Loctite On It As Well And Now The Barrel Nut Holds Much Better Than The Flimsy Squeeze Nut It Comes With. Other Than That No Problems And It Still Lowers My Tailgate Smooth And Easy Just Like On The First Day. If You Install This New I'd Recommend Using A Barrel Nut In The First Place To Avoid Issues Down The Road. -Notice from W. Courtney, Washington

Click to Show dee zee dz43301 tailgate assist shock (auto part) Details

Fit Perfectly On My 2014 Ram 1500. Previous 2012 Ram Developed A Bulge In The Tailgate On Left Side. Was Told The Bulge Was Not A Factory Defect. Ram Stated The Tailgate Was Being Dropped And A Internal Support For The Cable Attachment Was Bending. While They Supply The Wrench Get A T45 Bit For A 3/8 Ratchet. It Will Make Removing/installing The Cables Much Easier.

Dee-zee-dz43301-tailgate-assist-shock-(auto-part) set picture

- Q. ClaudiaI Am So Happy I Installed This Device On My Ram 1500 Big Horn. The Install Was Easy And It Works Great. I Like The Smooth Fall Of The Gate And It's Durable. I Highly Suggest This Device For Any Truck Tail Gate.

I Really Love The Product But It Did Snap On Me After 8 Months Of Use. Product Has A 3 Year Warranty So Deezee Is Taking Care Of It. We'll See If The Next One Will Last At Least A Year.

M. Alba, Lincolnshire

DEE ZEE DZ43301 TRUCK TAILGATE ASSIST Overview
Brand :    dee zee
Color :    Black
Weight :    1.00 pounds
  • Only one tailgate assist required per vehicle
  • Works in conjunction with factory cables
  • Safely controls the drop rate of truck tailgates
  • High quality and extensively tested for heavy use
  • Custom designed for each make and model
Price :    $18.88
Model :    DZ 43301
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Part (Automotive Parts And Accessories product review) for Dee Zee DZ43301 Truck Tailgate Assist available as-of ( Dec 2018 )

Pilot Automotive SW-131 Genuine Leather Steering Wheel Cover Dodge Logo

When you install a pilot leather steering wheel cover, you re upgrading your entire driving experience. Every time you take the wheel, you grab a solid connection to your vehicle and what s beneath your wheels. Made from high-quality, sensibly-padded leather, pilot leather steering wheel covers provide a comfortable, controlled grip on one of the more important pieces of navigational equipment in your vehicle.

Pilot Automotive SW-131 Genuine Leather Steering Wheel Cover Dodge LogoPilot-Automotive-SW-131-Genuine-Steering

PILOT AUTOMOTIVE SW-131 GENUINE LEATHER STEERING WHEEL COVER DODGE LOGO Feature
Brand :    pilot automotive
Weight :    0.75 pounds
Model :    SW-131
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (Automotive Parts And Accessories product review) for Pilot Automotive SW-131 Genuine Leather Steering Wheel Cover Dodge Logo available as-of ( Dec 2018 )
Price :    $14.58 (was $18.99)
  • Provides a comfortable connection between you, your vehicle and the road
  • Non slip backing
  • Made from genuine, high-grade, padded leather
  • Slip-on installation can be completed in seconds

dodge ram truck mopar molded splash guards for trucks without fender flares mud flaps front and rear set of 4 Price : 80.87, was : 0 as 2018-10-20
USUKDEFRESITJPCNCAGlobal
United States
Great Britain
German
France
Spain
Italy
Japan
China
Canada
World Wide
Mopar Molded Splash Guards Without (Auto Accessory) Reviewed by on jerdus.com

Top mopar molded splash guards without (auto accessory) Content

The F.A.Q. for dodge ram truck mopar molded splash guards for trucks without fender flares mud flaps front and rear set of 4

Front splash guards fit perfectly. Rear guards don't quite fit right, but they're fine and work well. (my truck is 2014 ram 1500 standard cab). They really keep the wheel splash off of the body. (i have 20 inch wheels). I don't know why ram doesn't include the splash guards when you buy the truck.

A number of questions have been asked here.

Q&A

(0) Question: Any drilling required or do they use existing holes?


(1) Question: I have 3" side step nerf bars (not wheel to wheel)-hoping these will fit on my ram 1500 quad cab


(2) Question: 2013-14 ram crew cab with wheel to wheel factory nurf bars. will these fit or hit the tubes?


(3) Question: Dodge ram truck mopar molded splash guards mud flaps - front & rear - set of 4, cost $73. 97-is the molded ram head logo also on the front flaps?


(4) Question: Are there mud flaps for a ram 1500 longhorn with stock foot steps


(5) Question: Will they fit 2013 crew cab 4x4 with factory wheel to wheel tub side bars


(6) Question: How far, in inches, below the truck body is the bottom of the mud flap?


(7) Question: Will these fit on a 2013 with fender flares



(note) Question: where/how to get Mopar (manufacturer's brand) accessories & similiar Mopar's products


Automotive 18148651, Exterior Accessories 11575851, Mud Flaps & Splash Guards 15660751Top Mopar Molded Splash Guards Without (Auto Accessory) FAQ Content

Best mopar molded splash guards without (auto accessory) in review

Shipping was fast, fits like a glove, easy to install and it's mopar. What's else can i say. Takes about 20 minutes to install and most of that time is getting the packaging open and tools ready.

Z. Olga, Wolverhampton

You might like to see Save-a-step Brace, Stabilizes Rv Steps Helps Prevent Rv Movement. Protects Rv Steps Sag Wear 7-5/8 -14 Camco's Rv Save-a-step Brace Is Designed To Be Placed Under Rv Entry Steps For Safety. It Stabilizes The Rv Steps And Helps Keep The Coach From Rocking. Helps Prevent Sag And Wear. -Camco Save-a-step Brace, Stabilizes Rv Steps Helps Prevent Rv Movement. Protects Rv Steps Sag Wear 7-5/8 -14 43691
  1. Highlight: Helps Prevent Sag And Wear.
  2. Highlight: Heavy-gauge Steel With A 3/4" Solid Metal Screw Thread.
Reasonable Camco Stabilizes Movement Protects 43691 (Auto Accessory) 43691 Camco Stabilizes Movement Protects 43691 (Auto
Or you might like to consider Fuel Filter, Spin-on, Donaldson S Duralite Air Cleaners Are Tough, Non-metallic, Lightweight, Self-supporting, And Completely Disposable. -Donaldson P551313 Fuel Filter, Spin-on, Secondary
  1. Properties: Durable.
  2. Properties: Reliable.
Price Cut Donaldson P551313 Fuel Filter, Spin-on, Secondary (Mechanical Components) Kfp551313 Donaldson P551313 Fuel Filter, Spin-on, Secondary (Mechanical

A. Wanda, St. Helens says

Installed the mud flaps on my 2016 ram 2500. Easy install and instructions were easy to understand. Plenty of hardware provided. The running boards do interfere with a positive fit. As it is i'm going to use the husky style up front and leave the oem in the back. I originally purchased the husky brand but felt they were too short. The specifications for these show the dimensions of 25 x 10. 8 x 8. 6. This would suggest that they are longer. However, they are actually the same size. The specifications need to show the correct dimensions. Hence the reason for only rating four stars for this product.

W. Jennifer, Kansas

I would've given a full five star rating but because they needed a little trim on the inside of where it meets the wheel well igave ot a 4. Most people wouldnt even notice the fitment issue but im justbeong honest. There a great price and they are real mopar original mud flaps that come in factory tagged bags to don't hesitate to buy them.

R. Josephine, New Jersey says

They work well for road debris with your stock tires. If you have the factory running boards on the truck you will have to move the running boards back about one inch due to rubbing. If you have a four wheel drive and plan on putting a level kit or any tire larger than stock you will want to get fender flares too.

D. Connie, Peterborough

I have a 2015 ram crew cab 1500 with 5'7" bed (called a short bed) with tire to tire side steps and the front mud flaps do not fit without cutting off 1" to 1. 5" of the step. Not a problem as i marked it with a sharpi, got the sawzal out (make sure you use a brand new long enough blade) and cut away. You will need a file to clean up the edges and drill new holes in the bottom of the step to put the caps back on. Took me an hour.

G. Yvette, Texas says

Fits perfectly on a 2016 dodge ram 1500. The screws that came with the kit were too large so i just used the originals that came with the truck. It instructs you to drill a third hole to secure the guards but i didn't. There are two screw holes on the inside of the well and a third on the bottom which seems like enough. I will keep checking and if it appears to get loose then i'll just add the additional. Since this is an oem it looks like it belongs and follows the lines of the truck nicely.

K. Shawna, Northumberland

They fit my truck very nicely, and i really like the way they look as well! definitely help keep the mud and rocks from hitting the side panel of my truck!

L. Jarvis, Wisconsin says

They are supposed to be a perfect fit for my '13 ram 1500 big horn but the molding had a different lip on it that made the fit a little akward in the wheel well. They fit though and have gone through 2 winters in northeast ohio sofar with no issues.

A. Sandra, Colorado

Good solid quality, easy to understand directions and they went on very easy. They also look good on the truck!

S. Paige, City of Bristol says

Fits great

P. Mays, Ealing

Received timely but the packing was abysmal. Box looked like it had been ran over by a truck, taped up, ran over again then shipped. Amazingly the products were fine. Installed on a 2015 dodge ram big horn with no issues. I already had a pom rivet gun and an assortment of rivets so i added a couple of plastic rivets between the flaps and the fender for extra mounting. Do you need these? my truck had less than 500 miles on it when installed and i already had a couple of rock chips on the lower fenders. I installed them mostly to keep from throwing mud in my boat when towing. After seeing the rocker panels these should be factory installed on any new ram truck.

J. Widmer, Saarland says

Dodge ram 2013 extended. They fit almost perfectly. I ended up using my own mounting hardware, bigger washers, better bolts and lock washers. Very happy with them! i did not drill the top holes, i just left them and they have been just fine for the last 2 months.

V. Noguera, Saskatchewan

They fit pretty well to the body of the truck. They should not be designed to where you have to screw into the body. Very difficult to do without having a right angle driver. Not all makers use this method. They do fit with the wheel to wheel tubes from the factory. 2014 ram crew cab shown in pics.



Leave a Reply

You must be logged in to post a comment.


Top dodge ram truck molded splash Review Content

Related Products

Product Image Gallery

Top-mopar-molded-splash-guards-without-54790dejtgvi-Content