Noco D800 Blue Hammer Indent Crimping Tool (Auto Accessory) 3256

Review for hammer indent crimping

Price was $25.99. Works

-L. Carrie

Hammer indent crimping the noco hammer crimping tool is designed for crimping terminals and lugs from 8-4/0 awg wire sizes. it bundles wires into a seamless shape that provides long-lasting holding strength -noco d800 blue hammer indent crimping tool

  • Bonus: Made From A Durable Cast Steel Body.
  • Bonus: Compact, Lightweight And Portable Design.

OnSale Noco D800 Blue Hammer Indent Crimping Tool (Auto Accessory) D800

Buy Now

Prologue

Used this to crimp some 1 gauge battery cables in my rv. Worked as advertised. I will probably use this thing 10 times in my life but when you need a tool you need a tool. Made nice clean and secure crimps on the ring connectors. It would be nice to have a vice big enough to use this but it works out fine with a hammer. The Best hammer indent crimping as-of ( Oct 2018 ) | Noco-Auto Accessory Review Bonus NOCO D800 Blue Hammer Indent Crimping Tool Crimps terminals and lugs from 8-4/0 awg. Made from a durable cast steel body. Compact, lightweight and portable design. Spring-loaded and use with a hammer or vise. Simple and easy to use .

Noco D800 Blue Hammer Indent Crimping Tool Review (d800)

I've used this hammer over 50 times already and it's still going and has save me down time at work. -Y. Allen

Noco D800 Hammer Indent Crimping

  1. Class: Automotive
  2. Brand: NOCO
  3. Color: Blue
  4. EAN: 0046221488005
  5. Product Dimensions:
    Height:3.40 inches
    Length:6.80 inches
    Weight:2.00 pounds
    Width:5.30 inches
  6. Manufacturer: NOCO
  7. Model: D800
  8. MPN: D800
  9. Quantity: 1
  10. Part/Serial Number: D800
  11. Type: Automotive Parts And Accessories
  12. Category: AUTO ACCESSORY
  13. ReleaseDate: 2012-01-10
  14. UPC: 046221488005
  15. Warranty: 1 Year Limited

hammer indent crimping Automotive Parts And Accessories, The noco hammer crimping tool is designed for crimping terminals and lugs from 8-4/0 awg wire sizes. it bundles wires into a seamless shape that provides long-lasting holding strength and optimal conductivity. this portable crimping tool is ideal for anyone on the go. easily fits into any tool box, and is a spring-loaded device that crimps terminals and lugs with a swing of a hammer. Noco D800 Blue Hammer Indent Crimping Tool (D800-Noco).

Noco D800 Hammer Indent Crimping Automotive Parts And Accessories

hammer indent crimpingNOCO D800 Blue Hammer Indent Crimping Tool (Switch to Mobile/Desktop Version)

Great crimper. Can also be used to extract information from sombody when placing their finger in tool.

Noco D800 Blue Hammer Indent Crimping Tool
Click to see NoticeNoco D800 Blue Hammer Indent Crimping Tool (Auto Accessory)"I read the reviews before purchasing, and since it was reasonably priced, i went ahead and purchased an "used" one. It didn't appear used at all. I used this to crimp 0 and 4 gauge cables, and it was a breeze. A few whacks with a hammer, some heat shrink, and it made a secure and neat connection for my sound system. . The lever worked perfectly, and with proper lubrication, this handy tool should last for a long time."


Yongcun 4AWG x 1/4 Cable Lugs Battery Terminals Tubular Cable Lugs Copper Lugs Pack of 10pcs Stud size 1/4 Wire Size 4AWG

Closed end design seals out moisture so cables stay dry and corrosion free manufactured from 100% heavy-duty annealed tinned copper pack of pcs we can sales the cable lugs tools

Yongcun 4AWG x 1/4 Cable Lugs Battery Terminals Tubular Cable Lugs Copper Lugs Pack of 10pcs Stud size 1/4 Wire Size 4AWGYongcun-Battery-Terminals-Tubular-Copper

YONGCUN 4AWG X 1/4 CABLE LUGS BATTERY TERMINALS TUBULAR CABLE LUGS COPPER LUGS PACK OF 10PCS STUD SIZE 1/4 WIRE SIZE 4AWG Overview
Brand :    yongcun
Size :    Stud size:1/4"
Weight :    0.24 pounds
Model :    4AWGx1/4"
Quantity :    10
Order click here :    normally ships in 24 hours
  • Wire size: 4awg
  • Screw size:1/4"
  • Closed end design seals out moisture so cables stay dry and corrosion free
  • Pack of 10pcs
  • Manufactured from 100% heavy-duty annealed tinned copper
Price :    $10.99 (was $15.99)
Sports :    Best Sporting Goods (yongcun product review) for Yongcun 4AWG x 1/4 Cable Lugs Battery Terminals Tubular Cable Lugs Copper Lugs Pack of 10pcs Stud size 1/4 Wire Size 4AWG available as-of ( Oct 2018 )

Battery Quick Connect Disconnect Electrical Plug 2-4 Gauge 175 Amps Recovery Winch Trailer

Driver recovery products' quick connector set gives the user a simple, convenient way to connect and disconnect power to winches and other electrical devices. These are constructed of tough polycarbonate with a fitted rubber boot on each end to guard against dust, moisture, corrosion, and the elements. The connector ends are identical so that the user may connect either end to the power or load side. They are mated, meaning they connect in only one direction (polarity). The connectors are designed for low voltage use (12-36 volts dc). The set is compatible with any winch, but the ends may not match the connectors included with other brands. The connectors are suited for high-current use with winches rated 8, 000 pounds or higher. The true rated capacity is 175 amps, although some dealers quote higher numbers for similar or even inferior connectors. Terminal pins are 0. 35" in diameter and can accept up to a 4 gauge wire. Connectors measure 3-1/8" long x 2-1/8" wide x 1" thick and measure 5-1/4" x 2-1/8" x 1" when connected as a set. The set is easy to use; just insert the wires into the terminal pins, crimp or solder. The pins can then be inserted into the connector housing and lock in place. Each kit comes with a pair of connectors (2 connector ends, 4 terminal pins, and 2 rubber boot caps).

Battery Quick Connect Disconnect Electrical Plug 2-4 Gauge 175 Amps Recovery Winch TrailerBattery-Connect-Disconnect-Electrical-Recovery

BATTERY QUICK CONNECT DISCONNECT ELECTRICAL PLUG 2-4 GAUGE 175 AMPS RECOVERY WINCH TRAILER Summary
Brand :    driver recovery products
Size :    Large
Weight :    0.65 pounds
Model :    FBA_QC-1
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (driver recovery products product review) for Battery Quick Connect Disconnect Electrical Plug 2-4 Gauge 175 Amps Recovery Winch Trailer available as-of ( Oct 2018 )
Price :    $13.99 (was $27.98)
  • Voltage: designed for low-voltage (12-36 volts dc) use
  • Gauge: accepts 2-4 gauge wire
  • Current rating: for high-current use; true rated capacity 175 amps
  • Size: connectors measure 3-1/8" long x 2-1/8" wide x 1" thick and measure 5-1/4" x 2-1/8" x 1" when connected as a set
  • Universal: allows quick connect and disconnect for winches or other electrical devices

Install Bay Copper Ring Terminal 4 Gauge 516 25 Pack - CUR4516

Copper ring terminal 4 gauge 516 25 pack

Install Bay Copper Ring Terminal 4 Gauge 516 25 Pack - CUR4516Install-Bay-Copper-Terminal-Gauge

INSTALL BAY COPPER RING TERMINAL 4 GAUGE 516 25 PACK - CUR4516 Pros
Price :    $10.95 (was $13.01)
  • 4 gauge 516
  • Copper ring terminal
  • 25 pack
Brand :    install bay
Weight :    0.30 pounds
Model :    CUR4516
Quantity :    1
Order click here :    normally ships in 24 hours
Car Audio Or Theater :    Best Car Electronics (install bay product review) for Install Bay Copper Ring Terminal 4 Gauge 516 25 Pack - CUR4516 available as-of ( Oct 2018 )

Install Bay Copper Ring Terminal 2 Gauge 3/8 Inch 10 Pack - CUR238

Copper ring terminal 2 gauge 3/8 inch 10 pack

Install Bay Copper Ring Terminal 2 Gauge 3/8 Inch 10 Pack - CUR238Install-Bay-Copper-Terminal-Gauge

INSTALL BAY COPPER RING TERMINAL 2 GAUGE 3/8 INCH 10 PACK - CUR238 Pros
Brand :    install bay
Weight :    0.15 pounds
Model :    CUR238
Quantity :    1
Order click here :    normally ships in 24 hours
Car Audio Or Theater :    Best Car Electronics (install bay product review) for Install Bay Copper Ring Terminal 2 Gauge 3/8 Inch 10 Pack - CUR238 available as-of ( Oct 2018 )
Price :    $9.99 (was $10.20)
  • 10 pack
  • 2 gauge 3/8 inch
  • Copper ring terminal

Blue Sea Systems ST Blade Fuse Block - 12 Circuits Negative Bus & Cover

Fuse block, atc/ato, 12 circuit, w/negative bus and cover, mfg 5026, 32vdc max w/30amp max per circuit & 100amp per block. 3. 32"w x 6. 5"h x 1. 52"d. Fuses sold separately.

Blue Sea Systems ST Blade Fuse Block - 12 Circuits Negative Bus & CoverBlue-Sea-Systems-Blade-Block

BLUE SEA SYSTEMS ST BLADE FUSE BLOCK - 12 CIRCUITS NEGATIVE BUS & COVER Advantage
Brand :    blue sea systems
Color :    Blue
Size :    amperage = none
Weight :    0.75 pounds
Model :    5026
Quantity :    1
Order click here :    normally ships in 24 hours
  • Positive distribution bus with 10-32 stud
  • Cover satisfies abyc/uscg requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses
  • St blade fuse block - 12 circuits with negative bus and cover
  • Accepts ato and atc fast acting blade fuses
  • Can be used for 24-hour circuits
Price :    $28.77 (was $35.96)
Sports :    Best Sporting Goods (Sports product review) for Blue Sea Systems ST Blade Fuse Block - 12 Circuits Negative Bus & Cover available as-of ( Oct 2018 )

Blue Sea Systems 10 Gang Common 150A Busbar Cover

The industry standard busbar for positive or negative power distribution bus material - tin platted copper cda 110/uns c1100 insert molded stainless steel studs eliminate need for securing nut and allow high torqueing electrical contact.

Blue Sea Systems 10 Gang Common 150A Busbar CoverBlue-Sea-Systems-Common-Busbar

BLUE SEA SYSTEMS 10 GANG COMMON 150A BUSBAR COVER Advantage
Brand :    blue sea systems
Color :    With Cover
Size :    150A
Weight :    0.25 pounds
Model :    2300
Quantity :    1
Order click here :    normally ships in 24 hours
Sports :    Best Sporting Goods (Sports product review) for Blue Sea Systems 10 Gang Common 150A Busbar Cover available as-of ( Oct 2018 )
Price :    $14.72
  • Continuous rating: 130a ac/ 150a dc
  • Max voltage: 300v ac/ 48v dc
  • 2 mounting holes accept 10 (m5) screws
  • Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity
  • 150a common busbar with 10 screws and a cover

10 pcs 4 GAUGE 4 AWG X 3/8 in TINNED COPPER CABLE LUG BATTERY WELDING CABLE CONNECTOR TERMINAL

Designed to fit solid or stranded wire. Closed end design to keep environmental conditions (e. G. Outdoor environment) away from the cable connection. Tinned for corrosion protection, excellent for outdoor installations and marine environments. Pure copper cable lug with excellent conductivity characteristics. Wire can be crimped or soldered to copper lug. High quality and heavy duty copper lug. These are the same copper lugs that we use on professional installations. Built to ul specifications with astm-b-152 copper.

10 pcs 4 GAUGE 4 AWG X 3/8 in TINNED COPPER CABLE LUG BATTERY WELDING CABLE CONNECTOR TERMINALTINNED-BATTERY-WELDING-CONNECTOR-TERMINAL

10 PCS 4 GAUGE 4 AWG X 3/8 IN TINNED COPPER CABLE LUG BATTERY WELDING CABLE CONNECTOR TERMINAL Advantage
Brand :    windynation
Size :    4-Gauge
Model :    LUG-04AG-38-10
Quantity :    10
Order click here :    normally ships in 24 hours
  • Pure copper cable lug with excellent conductivity characteristics
  • Closed end design to keep environmental conditions (e. g. outdoor environment) away from the cable connection
  • Wire can be crimped or soldered to copper lug
  • Tinned for corrosion protection, excellent for outdoor installations and marine environments
  • Designed to fit solid or stranded wire
Price :    $9.09
Sports :    Best Sporting Goods (windynation product review) for 10 pcs 4 GAUGE 4 AWG X 3/8 in TINNED COPPER CABLE LUG BATTERY WELDING CABLE CONNECTOR TERMINAL available as-of ( Oct 2018 )

AURELIO TECH Universal 2-4 AWG 350A Battery Connect Quick Connector Plug For 12V Winch Trailer Driver Electrical Devices

I Purchased Three Sets Of These For Several Projects. I Used One Set To Replace A Worn Out Set Installed On My Truck For My 8000 Pound Warn Winch. They Are A Direct Replacement For The Original Warn Plugs That Came With The Winch. I Used A Second Set To Install A Outlet At The Rear Of My Truck Using Welding Cable. The Third Set Was Installed On My Utility Trailer For A 2000 Pound Winch And To Modify A Set Of Jumper Cables. The Lugs Were Easy To Install Utilizing Solder Plugs And Are Shipped With Nice Rubber Covers. They Appear To Equal To And Are Rated For The Same Amp Draw As The Warn Connectors.

Specification: voltage: ul rated at 600 volts dc or ac terminal pins diameter: 0. 258" / 6. 55mm size: 3-1/8" x 2-1/8" x 1" color: red capacity: 350 amps compatibility: 2, 3, 4 gauge description: a robust and efficient "connect & disconnect" connector kit for a winch, remote battery charger, trailer or other electrical devices. Permitting over 10, 000 connect and disconnect actions. It's made from polycarbonate, a versatile and tough plastic that offers great strength combined with light weight. The bottom of the plug is lined with rubber to protect against dust, moisture and corrosion. The connectors are ideal for 12-36 volts dc low-voltage, and low or medium direct current use. The ends are designed to connect in only one direction, making it impossible to connect the wrong polarities to one another- for increased safety and convenience. The terminal pins inner diameter is 0. 258" and it can accept wires from 2 to 4 gauge. Installation and operation are very straightforward- simply insert the wires into the terminal pins, then fuse or crimp them (make sure you use a crimping tool and not a hammer). Then insert the terminal pins into the connector housing and lock them in place. Package includes: a pair of connectors (2 connector ends, 4 terminal pins, and 2 rubber boot caps).

AURELIO TECH Universal 2-4 AWG 350A Battery Connect Quick Connector Plug For 12V Winch Trailer Driver Electrical DevicesAURELIO-TECH-Universal-Connector-Electrical

2-4 Gauge Driver Battery Quick Connect Plug Kit Recovery Winch Trailer 350 Amps (Aurelio Tech) FAQ.

These Are A Great Product Fit My 4 Gauge Wire Perfectly. I Installed Mine To Quickly Detach My Marine Battery From My Boat. Works Great. One Thing To Note - You'll Need A Hydraulic-style Press To Crimp The Lugs On Or Solder (or Use Bolt Cutters To Crimp). A Hammer Style Crimper Does Not Have The Strength To Do The Job. -Notice from W. Shirley, Cheshire

Click to Show 2-4 gauge driver battery quick connect plug kit recovery winch trailer 350 amps (aurelio tech) Details

Excellent Disconnects For The Price! They Have A Very Solid Feel To Them The Contacts Snap Firmly Into Position And When Connected Together They Stay Tight And Don't Wiggle. The Wire Terminals Are Very Solidly Made. The Dust/weather Covers Fit Well And Are A Nice Extra Bonus Not Always Included With Disconnects Like This Even At Much Higher Cost. I'm Honestly Surprised At How Good These Are For The Price And Recommend Them Highly If You Need A Pair!

2-4-gauge-driver-battery-quick-connect-plug-kit-recovery-winch-trailer-350-amps-(aurelio-tech) set picture

- P. BullockPlease Be Aware That If You Use 4 Or 2 Copper Wire In These Connectors That You Can Not Run 350 Amperes Thru The Wireing Constantly. 2 Copper Is Good For About 95 Amperes On A Constant Load. You May Get A Lot More Amperes Thru The 2 Copper For A Short Period Of Time As In Cranking An Automotive Engine But Then You Need To Allow The Wires To Cool Down For A While Or You Will Melt The Insulation Off The Wires And Eventually Melt The Copper Wire. If You Run Over The Rated Amperes Of The Conductor That You Choose To Use You Also Run The Risk Of Melting Your Solder Joint. It Is Best To Crimp The Connectors With A Proper Tool. Some Tool Rental Places Carry The Proper Crimper. Rusty

Quick Disconnect At A Great Price. I Connected 4 Awg Wire Not Sure How You Could Properly Connect 2 Awg. I Used A Crimper And The Connection Is Very Solid. The Aluminum Posts Do Make A Very Good Connection - Very Tight And Solid. I Base My Amperage Usage On The Wire Used - So Taking 4 Awg I Am Sure These Will Preform To My Needs. I Purchased 2 Sets So I Could Have One In The Rear For My Air Compressor And One In The Front For My Jumper Cables. Again The Connection Is Very Solid. The Build Quality Seems Sound. I Like The Rubber Caps - Not Sure If I'll Use Them But They Do Fit Well.

N. Betty, Wyoming

AURELIO TECH UNIVERSAL 2-4 AWG 350A BATTERY CONNECT QUICK CONNECTOR PLUG FOR 12V WINCH TRAILER DRIVER ELECTRICAL DEVICES Advantage
Brand :    aurelio tech
Color :    Red
Weight :    0.70 pounds
Model :    CECOMINOD050476
Quantity :    1
Order click here :    normally ships in 24 hours
  • Connect/disconnect in one second keeping things neat and organized! suited for high-current use with winches rated 8, 000 pounds or higher! replace standard clamp ends on your battery charger to prevent accidental reverse polarity when hooking up a charger and have provisions for mounting so they can be easily secured to a vehicle.
  • Ultralight design with tight weather covers for 100% safety. combined shell made from polycarbonate- a versatile and tough plastic, makes this connector sturdy and reliable.
  • Comes with 4 terminal pins made of red copper coated with silver. features strong electrical conductivity and reduces the resistance to guarantee stable voltage and current.
  • Heavy-duty & multipurpose universal battery quick connector- fits all ul rated at 600 volts dc or ac devices, batteries, power inverters and solar setups, winches, forklifts, chargers, power modules, cars, motorcycles, boats and etc.
Price :    $16.99
Automotive Parts And Accessories :    Best Toys And Games (aurelio tech product review) for AURELIO TECH Universal 2-4 AWG 350A Battery Connect Quick Connector Plug For 12V Winch Trailer Driver Electrical Devices available as-of ( Oct 2018 )

Pico 4239C 4 AWG Battery Cable 3/8 Tubular Lug Ring / Eye Terminals 15 Per Package

What's not to like. It's a wire end lug . Arrived promptly . Bight and clean. 4 gage fits as loose as a goose . I used the 6 gage lugs ordered and delivered simultaneously from online store, and for crimped connections, and they were perfectly snug prior to (hydraulic) crimping. 5

Solid copper closed end lug rings designed for battery applications. Solder or crimp type.

Pico 4239C 4 AWG Battery Cable 3/8 Tubular Lug Ring / Eye Terminals 15 Per PackagePico-Battery-Tubular-Terminals-Package

Pico Battery Tubular Terminals Package (4239c) FAQ.

Good quality lugs! i was planning on soldering these, but ended up crimping them with my bench vise. I can't imagine a better and long lasting connection. It was so fast and easy, but i am sure that soldering would have been good as well. -Notice from Q. Lynette, Texas

Click to Show pico battery tubular terminals package (4239c) Details

They are just as advetised. Easy to work with, the 4 awg cable we had fit just fine; in fact, the cavity is perhaps a bit too big, if anything and that suits us just fine. It's when they make these things just a little big snug that one has problems getting them installed. These went on in a breeze and they appear to be conducting just fine. Good solid crimps.

Pico-battery-tubular-terminals-package-(4239c) set picture

- P. GinaThey got the job done. They are a little large fitting around a 4 gauge wire but they crimped on just fine so no complaints. . 10/12/2014 so a bit of an update. There has been no corrosion thus far. I am using these under the hood of my vehicle as the mains wiring connection points and have been really impressed that there is no corrosion yet. They are holding up very well. I highly recommend these if your looking for ring terminals. Again the only gripe is that they are slightly larger than necessary but that is to accomodate fitting over the jacket of your wiring but will work fine for a cold weld.

I would recommend these terminals. The ring is not as thick as some that i have used in the past but are definitely sufficient for the current that will be required to carry. The thickness i measured was . 04 inch or 1. 2 mm. The diameter of the hole is . 39 inch or 9. 9 mm. The over all length of the terminal is 1. 4 inches or 35. 7 mm. Prompted shipping.

H. Susan, Alsace

PICO 4239C 4 AWG BATTERY CABLE 3/8 TUBULAR LUG RING / EYE TERMINALS 15 PER PACKAGE Overview
Brand :    pico
Model :    4239C
Quantity :    15
Order click here :    normally ships in 24 hours
  • 4 awg cable
  • 3/8" stud size
  • Solid copper closed end lug rings
  • Solder or crimp
  • 15 per package
Price :    $6.95 (was $10.18)
Automotive Parts And Accessories :    Best Auto Part (pico product review) for Pico 4239C 4 AWG Battery Cable 3/8 Tubular Lug Ring / Eye Terminals 15 Per Package available as-of ( Oct 2018 )

Ancor 252246 Marine Grade Electrical Heavy Duty Tinned Copper Lugs 6-Gauge, Size 3/8 Screw, 2-Pack

Lug, 6 wire, 3/8" stud, tinned, 2 ea. , mfg 252246.

Ancor 252246 Marine Grade Electrical Heavy Duty Tinned Copper Lugs 6-Gauge, Size 3/8 Screw, 2-PackAncor-252246-Marine-Electrical-6-Gauge

ANCOR 252246 MARINE GRADE ELECTRICAL HEAVY DUTY TINNED COPPER LUGS 6-GAUGE, SIZE 3/8 SCREW, 2-PACK Overview
Brand :    ancor
Color :    2-Pack
Size :    2 Pack
Weight :    0.5 pounds
  • Ul 486a
  • Closed end design seals out moisture so cables stay dry and corrosion free
  • Seamless barrel design allows for maximum strength when crimped
  • 2 pack of 6 awg heavy-duty lugs with a 3/8" screw size ring
  • Manufactured from 100% heavy-duty annealed tinned copper, providing for maximum current flow while resisting corrosion from salt and moisture
Price :    $3.05 (was $4.99)
Model :    252246
Quantity :    1
Order click here :    normally ships in 24 hours
Sports :    Best Sporting Goods (ancor product review) for Ancor 252246 Marine Grade Electrical Heavy Duty Tinned Copper Lugs 6-Gauge, Size 3/8 Screw, 2-Pack available as-of ( Oct 2018 )

noco d800 blue hammer indent crimping tool Price : 25.99, was : 18.28 as 2018-08-01
USUKDEFRESITJPCNCAGlobal
United States
Great Britain
German
France
Spain
Italy
Japan
China
Canada
World Wide
Noco D800 Blue Hammer Indent Crimping Tool (Auto Accessory) Reviewed by on jerdus.com

Top noco d800 blue hammer indent crimping tool (auto accessory) Content

The F.A.Q. for noco d800 blue hammer indent crimping tool

Priced 60 % less at online store than the local automotive stores. It works and looks like a professional crimping job.

A number of questions have been asked here.

Q&A

(0) Question: will this work for skyhigh car audio 2/0 cable?


(1) Question: where is this made?


(2) Question: will this do 10 gauge butt connector crimps, or it is too big to do 10 gauge wires?



(note) Question: where/how to get Noco (manufacturer's brand) accessories & similiar Noco's products

Answer:

Click the marked text to copy link to Clipboard

Makes the crimping of large wires such as battery cables a cinch to crimp when replacing bad connections. It only takes one or two smacks from the hammer and it leaves a really nice, clean, strong crimp mark. It is a heavy well constructed tool. A must for the diy car guy or mechanic, be it professional or amateur. For the guy who loves tools, this is a nice piece to add to your box.


Automotive 18148651, Hand Tools 14180751, Threading & Cutting Tools 10580751, Tools & Equipment 14960751Top Noco D800 Blue Hammer Indent Crimping Tool (Auto Accessory) FAQ Content

Best noco d800 blue hammer indent crimping tool (auto accessory) in review

Drop a hammer and its on.

P. Isabel, Southampton

You might like to see Premium Grade Rubbing Compound - 18 Medium Cut Compound Is Formulated With An Aggressive Blend Of Nanotechnology Polishing Agents To Restore Your Car S Finish. -Turtle Wax T-415 Premium Grade Rubbing Compound - 18 Oz.
  1. Properties: Silicone Free Formula Is Safe For Use In Professional Detail, Paint And Body Shops.
  2. Properties: Can Be Applied By Hand Or With An Orbital Or Rotary Polisher.
Discounted Turtle Wax T-415 Premium Grade Rubbing Compound - 18 Oz. (Auto Accessory) T 415 Turtle Wax T-415 Premium Grade Rubbing Compound - 18 Oz. (t
Or you might like to consider Premium detail brush wheels, interior, leather, trim - set detail buddytm is a line of detailing products for professional detailers, designed by professional detailers. we have been searching for the perfect detailing brush for years and -detail buddy premium detail brush wheels, interior, leather, trim - set 3
  • Benefits: Gentle - Great For Using On Soft Nappa Leather Seats Or Trim Such As Exterior Emblems. Will Not Scratch If Used With A High Quality Wheel Cleaner Or Car Wash Soap.
  • Benefits: 2" Long Bristles - Great For Reaching Into Deep Lug Nuts And Tight Spaces. No Metal Parts Makes It The Safest Brush For Your Vehicle. 3 Different Brush Sizes - 1", 1. 25", 1. 5" In Diameter.
Price Fall Detail Buddy Premium Detail Brush Wheels, Interior, Leather, Trim - Set 3 (Auto Accessory) Fba Db 3set Detail Buddy Premium Detail Brush Wheels, Interior, Leather, Trim - Set 3 (fba db

J. Cathy, Delaware says

Worked just as i needed it to. I'm sure its not as graceful as the big plier version of the big crimpers, but its 1/5 the cost. If i was crimping big wires daily or weekly i'd might invest in something like that, but for the weekend warrior who is occasionally going to need to make their own battery cable this works excellent.

J. Maria, Bradford

Works great

L. Whiteman, West Berkshire says

Good product for what it does, works well. A little bit hard to read the measuring indicators on the silver part that shows you how far the crimp should go for the gauge of wire you are using. I was just looking for low price to get a few crimps done and it did the job.

A. Meghan, Newcastle upon Tyne

So far i have used this to crimp lugs onto 4 awg 4 cables. Works great. I use a 4 pound hammer. I do not place the crimper directly onto anything of value. I've been placing it on a wood plank on the garage floor, so that i do not damage the floor. Since nothing secures the crimper, it of course falls/jumps over when you whack it, but that's fine. . So far, the spring has held up nicely. All the spring does is hold the lug in place before the first whack. If the spring ever fails, some other method will be needed for that purpose. . The device seems to be very sturdy.

Z. Rita, Maine says

Works well for what it is and that's a cheap larger gauge crimping tool. I used it to crimp a bunch of 6 and 8 ga wires and it did a good job. If i was doing this on a professional level i would most certainly use a hydraulic crimping tool but for the light duty use this will work fine until it either breaks or i feel the need to upgrade. It produced consistent and reliable crimps on all the different ends and gauge wires thrown at it.

O. Guest, Ealing

Used this to crimp the wires when i installed new battery terminals. Simple and effective!

C. Bullock, Alabama says

This thing is a great investment if you do more than average amounts of wiring. If you even have a one time use for it, this is invaluable for installing large gauge wire lugs. Smashing them with a hammer just does't work very well.

V. Lorenz, Redcar and Cleveland

An affordable way to make sure your battery lug ends are on securely. The best way is with a hydraulic press but now everyone has the budget for one. This makes it so everyone from the car stereo install to the full battery relocation can make sure their ends are on securely. I always use good qaulity electrical tape on the lug end to the wire end to ensure are more water proof connection(shrink wrap is better)

E. Weber, Rotherham says

It is cheap but good, does what it is supposed to do. The first time you use it you may want to use it on a test piece of the same wire and connector you intend to crimp. That way your finished piece will be most awesome as somebody with your skills would be expected to do.

R. Florence, Virginia

Very small, decent 0- 4 gauge crimping tool. Was expecting it to be heavier. To me its work the cost. Seems to do exactly as it should. And im pleased to say that i would recommend this product to those who are on a budget or just prefer not to spend too much on an item to crimp certain wire gauges (persons like me. Lol. Dont plan to use this much. Just wasnt feeling to pay someone to install my car audio system). . Since im not a professional at this the only con to this i would say is that the level should be a little more friendly to one's fingers. It has a groove at the bottom of the level which may be sharp for most. I think ill try wrapping it in shrink tube or tape. . Great product otherwise :d

Z. Adrienne, New South Wales says

I bought this for crimping four battery terminal lugs for a quick-disconnect for a heavy duty winch. There's no way to properly crimp that particular kind of connector without a crimping tool. It worked well, using a 2. 5 lbs hammer. I'd buy it again.

G. Shirley, Kansas

Works perfectly, i use the tool in my vise, rather than smacking it with a hammer.



Leave a Reply

You must be logged in to post a comment.


Top hammer indent crimping Review Content

Related Products

Product Image Gallery

Top-noco-d800-hammer-indent-crimping-325606vu5wx8-Content