Preface
Works great and cheaper than all others so great deal. Easy to use wish ivwould have found it before i paid $32 for the other i have at work but needed one for home also Best grease fitting cleaning | Performance Tool-Auto Accessory Review as-of ( Feb 2019 ) Featured Performance Tool W54209 Grease Fitting Cleaning Tool Fits both angled and straight grease fittings. Clears grease fittings of hardened matter. Simply draw oil or grease into the tool, place on fitting and strike with a hammer .
Performance tool w54209 grease fitting cleaning tool Review (w54209)
Seems to work well. Fits on my grease gun just fine, no leaking at connection. All metal construction. Grease flow through it fine. Not really sure if it is doing the oem joints any good or not, but since they have 180, 000 miles on them and are over 15 years old, i figured i would give it is try. I used it on my 2002 f150, doing the inner and outer tie rod ends and steering arm joint. The original joints have no play or looseness in them, no squeaking or rattling, so i don't think they need replacement, but figured they were probably dry with all the time and miles on them. This may give them a few more years till they need replacement. I did notice that you should not fill these boots as much as you do with ones with zerk fittings. If you fill your oem boots till they just start to bulge, some grease will come back out the hole you made with the needle. The first one i did looks like 1/2 the grease came back out (i did it till it started noticeably bulging). Second one was better, just a little came out, the final ones just a touch came out right as i removed the needle, but stopped almost immediately. I see the price on these things vary greatly. I bought this one for under five, but is now almost fifteen dollars. -I. Elanor
- Rank
- Automotive
- Brand
- Performance Tool
- ClothingSize
- Grease Fitting Cleaning Tool
- EAN
- 0039564075452
- Product Dimensions
Height: 0.80 inches Length: 9.00 inches Weight: 0.10 pounds Width: 2.60 inches - Manufacturer
- Performance Tool
- Guarantee
- Parts
- Model
- W54209
- MPN
- W54209
- Total-Items
- 1
- Quantity
- 1
- Part/Serial Number
- W54209
- Group-Order
- Automotive Parts And Accessories
- Category
- AUTO ACCESSORY
- Type
- 26308005
- ReleaseDate
- 2013-12-20
- Size
- Fitting Cleaning Tool
- UPC
- 039564075452
- Warranty
- Lifetime
grease fitting cleaning Automotive Parts And Accessories, Fits both angled and straight grease fittings. clears grease fittings of hardened matter. simply draw oil or grease into the tool, place on fitting and strike with a hammer. Performance Tool W54209 Grease Fitting Cleaning Tool (W54209-Performance Tool).
Performance Tool W54209 Fitting Cleaning Automotive Parts And Accessories
Performance Tool W54209 Grease Fitting Cleaning Tool (Switch to Mobile/Desktop Version)
Worked perfectly
Performance Tool W54209 Grease Fitting Cleaning ToolClick to see Notice
Performance Tool W54209 Grease Fitting Cleaning Tool (Auto Accessory)"Works great."SAE & MM Hydraulic Grease Fitting Kit, 220 Piece Straight Angled 1/4 , 1/8
Specifications 110 pc metric hydraulic grease fitting assortment hard to find 110 pieces hydraulic grease fitting assortment set in metric sizes comes with a convenience storage case perfect for professionals, diyers, and more and specifications 110 pc sae hydraulic grease fitting assortment hard to find 110 pieces hydraulic grease fitting assortment set in sae sizes comes with a convenience storage case perfect for professionals, diyers, and more
Hydraulic-Grease-Fitting-Straight-Angled
SAE & MM HYDRAULIC GREASE FITTING KIT, 220 PIECE STRAIGHT ANGLED 1/4 , 1/8 Advantages | |
---|---|
Brand : | j&r quality tools |
| |
Price : | $27.95 |
Model : | 55447 |
Order click here : | normally ships in 1-2 business days |
Home Improvement : | Best Building Material (j&r quality tools product review) for SAE & MM Hydraulic Grease Fitting Kit, 220 Piece Straight Angled 1/4 , 1/8 available as-of ( Feb 2019 ) |
LockNLube Grease Coupler locks onto Zerk fittings. Grease goes in, on machine. World's best-selling original locking grease coupler. Rated 10,000 PSI. Long-lasting rebuildable tool.
Used One Of These For About 10 Months. Just Now Starting To Leak A Little On Slightly Worn Zerks. Now I Can Put In The Repair Kit That Came With It And Go Another 10 Or 12 Months. That Is At Least 10 Times Longer Than What A Standard Coupler Would Last Me. I Use A Grease Gun Most Every Day. Great Product.
The locknlube grease coupler is a long-lasting, rebuildable tool. Rated to 10, 000 psi the locknlube grease coupler does not leak and will not pop off once locked on. The thumb lever allows the coupler to easily release from stuck fittings, even at extreme pressures up to 10, 000 psi. It is not a throwaway part. It is compatible with any grease gun.
LockNLube-fittings-best-selling-Long-lasting-rebuildable
Locknlube grease gun coupler lock (GC81001) FAQ.
Bought Two Of These. One Works Exactly As Advertised. The Other One Slips Off 50% Of The Time So Grease Oozes All Over. Both Couplers Are On Identical Grease Guns - Lincoln 1162. So 5 Stars For One 1 Star For The Other. Their Website Has No Customer Service Department. Only A Toll Number And An Address. A Difficult To Find Website Instruction Says To Hold The Lever Forward If It Slips Off. Doesn't Work With The Pressures Involved. Plus Their Website Brag Is That It Is A One Hand Operation. Not So If The Other Hand Has To Hold The Lever. Now The Coupler Is Supposed To Come With Extra Jaws And A Seal For A 25% Greater Price According To The Website. I'm Going To Try The Toll Number To See What Happens. Edit Update: Just Got Off The Phone With Customer Service (i Believe It Was The Owner. ) We Had A Very Informative Conversation That Speaks Volumes About The Integrity And Genuineness Of The Company. I Am Very Pleased With The Results Of The Conversation And Would Rate The Company As A Whole As 5+ Stars. I Urge Anybody That Wants This Product To Feel Confident That It Will Work And In The Rare Case Of A Problem It Will Be Resolved. -Notice from Z. Anonymous, Newfoundland and Labrador
Click to Show locknlube grease gun coupler lock (gc81001) Details
When Trying To Grease A Zerk In A Tight Place This Locknlube Makes It Easy. Well Made And Very Solid Comes With Replacement Parts If You Ever Need Them.

- J. BettyI Was Skeptical At First Despite The Overwhelmingly Positive Reviews But I Was Quickly Convinced This Is The Single Best Accessory Available For Any Grease Gun. I Am A Professional Auto Mechanic And I Pump A Lot Of Grease As Part Of My Day-to-day Work. Since I Added This Coupler To My Grease Gun (lincoln 1162 They Pair Together Superbly) I Have Not Once Seen Any Leakage Around A Grease Fitting. I've Used This On Some Dirty Chewed Up Caked On Fittings And It Still Manages To Grab Firmly And Seal Perfectly. As Others Have Mentioned The Only Issue I've Run Across Is Clogged Fittings. My Lincoln 1162 Pumps At 6 000psi Which Will Blow Open Just About Any Kind Of Gunk That Might Clog Up A Fitting But Once In A While I Find One Thats Just That Bad That I Can't Pump Anything Through It. When That Happens I Am In A Pickle. Even Under 6 000psi The Jaws Of The Lock'n'lube Don't Let Go. The Problem Being If I Hit A Plugged Fitting And It Doesn't Free Up The Lnl Gets Stuck On The Fitting Like A Pitbull Usually Requiring A Pair Of Channel-lock Pliers To Squeeze Down The Release Lever To Free The Coupler. It Is A Bit Larger Than A Standard Coupler And It Won't Fit Into Every Nook And Cranny But I Still Find It Useful In Those Situations As It Does A Great Job At Holding My Adapters And Specialty Tips In Place Allowing Me To Focus On Holding The Adapter Onto The Fitting Rather Than Holding The Coupler Onto The Adapter. Despite Those Couple Of Shortcomings I Still Like It Better Than A Regular Coupler In Every Way And Would Recommend This To Anybody.
I Used This For The First Time. I Read One Review Where The Man Spoke About How Much Faster Greasing Was For Him With This Coupler. That Was My Finding. The Really Difficult Fittings To Get Grease Into Had To Take The Grease With This Tool. I Went From Trying To Force The Coupler To Stay (the Old Way) On To Just Clamp It On And Inject. After My First Usage I Concluded This Would Pay For Itself Quickly In Saved Labor. I Did Turn One Right Angle Fitting A Little Too Be Able To Get On It. I Also Had Two Fittings On The Bob Cat That Were Inside A Cut Out Hole. Those Two Were Harder. I Am Thinking Of Enlarging The Holes. I Am Still Giving This 5 Stars Because It Has Made Greasing So Much Easier And Quicker. I Own Three Lock N Lubes Now.
F. Medina, Lincolnshire
LOCKNLUBE GREASE COUPLER LOCKS ONTO ZERK FITTINGS. GREASE GOES IN, ON MACHINE. WORLD'S BEST-SELLING ORIGINAL LOCKING GREASE COUPLER. RATED 10,000 PSI. LONG-LASTING REBUILDABLE TOOL. Featured | |
---|---|
Brand : | locknlube |
| |
Price : | $29.95 |
Model : | GC81011 |
Quantity : | 1 |
Order click here : | normally ships in 24 hours |
Automotive Parts And Accessories : | Best Auto Part (locknlube product review) for LockNLube Grease Coupler locks onto Zerk fittings. Grease goes in, on machine. World's best-selling original locking grease coupler. Rated 10,000 PSI. Long-lasting rebuildable tool. available as-of ( Feb 2019 ) |
Neiko 50463A SAE Hydraulic Grease Fitting Kit, 110 Piece Straight Angled 1/4 , 1/8
110 piece hydraulic sae grease fitting set. This set features: 30 straight 1/4 -28 zerk fittings, 15 90 degree 1/4 - 28 zerk fittings, 15 45 degree 1/4 - 28 zerk fittings, 15 45 degree 1/8" npt zerk fittings, 15 90 degree 1/8" npt zerk fittings, 20 straight 1/8" npt zerk fittings, includes plastic storage case.
Neiko-50463A-Hydraulic-Fitting-Straight
NEIKO 50463A SAE HYDRAULIC GREASE FITTING KIT, 110 PIECE STRAIGHT ANGLED 1/4 , 1/8 Benefit | |
---|---|
Brand : | neiko |
Size : | %%SIZE%% |
Model : | 50463A |
Quantity : | 1 |
Order click here : | normally ships in 24 hours |
Home Improvement : | Best Tools (neiko product review) for Neiko 50463A SAE Hydraulic Grease Fitting Kit, 110 Piece Straight Angled 1/4 , 1/8 available as-of ( Feb 2019 ) |
Price : | $7.95 (was $15.85) |
|
Swordfish 41030 SAE Grease Zerk Fitting Nipple Assortment, 110 Piece
Sold factory direct. Heavy duty steel, zinc plated for rust resistance. Sae sizes 1/4" -28 straight, 45 and 90 , 1/8" -27 straight, 45 and 90 . Ideal for garage, shop and automotive applications. Made by swordfish tools.
Swordfish-41030-Grease-Fitting-Assortment
SWORDFISH 41030 SAE GREASE ZERK FITTING NIPPLE ASSORTMENT, 110 PIECE Featured | |
---|---|
Brand : | swordfish |
Color : | Silver |
Weight : | 1.65 pounds |
Model : | 41030 |
Quantity : | 1 |
Order click here : | normally ships in 24 hours |
Automotive Parts And Accessories : | Best Auto Part (Automotive Parts And Accessories product review) for Swordfish 41030 SAE Grease Zerk Fitting Nipple Assortment, 110 Piece available as-of ( Feb 2019 ) |
Price : | $19.49 |
|
50 Grease Fitting Caps Yellow Polyethylene Clipsandfasteners Inc
Polyethylene caps that snap over fittings to seal out dirt and moisture. Integral ring keeps cap in place during servicing. Yellow50 per package
Grease-Fitting-Polyethylene-Clipsandfasteners-Inc
50 GREASE FITTING CAPS YELLOW POLYETHYLENE CLIPSANDFASTENERS INC Benefit | |
---|---|
Brand : | clipsandfasteners |
Model : | 15932770 |
Quantity : | 1 |
Order click here : | normally ships in 24 hours |
Home Improvement : | Best Plumbing Fixture (clipsandfasteners product review) for 50 Grease Fitting Caps Yellow Polyethylene Clipsandfasteners Inc available as-of ( Feb 2019 ) |
ABN Hydraulic Grease Fitting SAE Standard 110-Piece Kit Straight, 90-Degree, 45-Degree Angled Zerk Assortment Set
If you run into damaged or broken grease fittings, the abn hydraulic grease fitting sae standard 110-piece kit - straight, 90-degree, 45-degree angled zerk assortment set is your solution. Maintain your machinery with this set of 110 fittings. Fully replace missing or broken grease zerks by simply inserting lubricant directly into the bearing without disassembling or replacing the entire bearing. 6 of the most commonly used zerk/grease sae fittings are including: (30pc) 1/4"-28, (15pc) 1/4"-28 45-degrees, (15pc) 1/4"-28 90-degrees, (15pc) 1/8"-27 90-degrees, (15pc) 1/8"-27 45-degrees, and (20pc) 1/8"-27. Each fitting is constructed from zinc-plated steel for maximum strength and rust-resistance. This package includes 110 sae zerk grease fittings inside a carrying case for your convenience. Warning: this product can expose you to chemicals which is are known to the state of california to cause cancer and birth defects or other reproductive harm. For more information go to www. P65warnings. Ca. Gov.
ABN-Hydraulic-Fitting-Standard-110-Piece
ABN HYDRAULIC GREASE FITTING SAE STANDARD 110-PIECE KIT STRAIGHT, 90-DEGREE, 45-DEGREE ANGLED ZERK ASSORTMENT SET Benefits | |
---|---|
Brand : | abn |
Size : | SAE Standard |
Weight : | 0.70 pounds |
Model : | 655 |
Quantity : | 1 |
Order click here : | normally ships in 24 hours |
Home Improvement : | Best Building Material (abn product review) for ABN Hydraulic Grease Fitting SAE Standard 110-Piece Kit Straight, 90-Degree, 45-Degree Angled Zerk Assortment Set available as-of ( Feb 2019 ) |
Price : | $12.99 |
|
Lincoln Lubrication G904 Small 4-Way Grease Fitting Tool
They Don't Tell You That There Is Two Different Tools Because This Tool Works On None Of My Freeze Fittings!! Very Unhappy! Tried For First Time. . Don't Work N Now It Can't Be Returned Or Swapped! I Buy A Lot From Online Store. . & Am Very Unhappy!!! Tom S. Pa
For over 90 years, service professionals have looked to lincoln for lubrication equipment designed to meet the demands of day-to-day shop life. In response to overwhelming requests, lincoln proudly makes its equipment available to those outside the service industry with our guardian line of lubrication products. Designed for life outside the shop, guardian brings you a level of performance previously unavailable in over-the-counter lubrication equipment. Every guardian product is engineered to meet the industry's most exacting standards for reliability and performance. Like all lincoln products, the guardian name is your assurance that what you're buying is no ordinary piece of equipment.
Lincoln-Lubrication-G904-Grease-Fitting
Lincoln Lubrication G904 Small 4-way Grease Fitting Tool (Loln Lubrication) FAQ.
The Tool Is Adequate The Real Problem Is Access Because Of The Design You Can Not Reach Most Zerk Fittings Are Not Accessable Because Of The "t" Shape And Size I Could Not Use It On Any Of The Grease Fittings On My Truck Grease Fitting Has To Be Fully Exposed With4 To 6 Inches Of Clearance For Tool And Your Hand. To Be Fair I Had Unrealistic Expectations And Did Not Fully Consider Access Nor The Capabilities Of This Tool Grease Fittings Tend To Be In Very Tight And Limited Spaces And This Tool Is Not Workable Because It Needs 360 Degree Access 4 To 10 Inch Clearance. -Notice from E. Sharon, Victoria
Click to Show lincoln lubrication g904 small 4-way grease fitting tool (loln lubrication) Details
I Used 3 Of The 4 Sides Of This Recently To Drill Out A Zerk Fitting Tap New Threads And Then Tighten Down The New Zerk Fitting. I Was Not Gentle With It At All And Expected It To Break Somehow But It Held Up Great.

- Z. EmilyEven Though You Think You Might Never Need This Tool If You Do Even Minor Maintenance On You Vehicles This Could And Will Come In Handy. If Not The Lawn Mower Or Whatever It Will Do The Trick!
Picture Exactly What I Expected And At A Good Price Also Like Not Made In China Would Buy Again And Recomend
K. Maria, Hertfordshire
LINCOLN LUBRICATION G904 SMALL 4-WAY GREASE FITTING TOOL Benefit | |
---|---|
Brand : | loln electric |
Weight : | 0.10 pounds |
Model : | G904 |
Quantity : | 1 |
Order click here : | normally ships in 24 hours |
| |
Price : | $10.14 (was $10.25) |
Automotive Parts And Accessories : | Best Auto Accessory (loln electric product review) for Lincoln Lubrication G904 Small 4-Way Grease Fitting Tool available as-of ( Feb 2019 ) |
Innovative Products Of America 7862 Grease Joint Rejuvenator
Have you ever tried to force grease through a grease fitting and couldn't? now you can! the grease joint rejuvenator forces light oil into a grease joint, flushing out old, hardened grease and allowing new grease to be pushed through.
Innovative-Products-America-7862-Rejuvenator
INNOVATIVE PRODUCTS OF AMERICA 7862 GREASE JOINT REJUVENATOR Feature | |
---|---|
Price : | $36.25 (was $38.56) |
| |
Brand : | innovative products of america |
Color : | Silver |
Weight : | 1.00 pounds |
Model : | 7862 |
Quantity : | 1 |
Order click here : | normally ships in 24 hours |
Automotive Parts And Accessories : | Best Auto Accessory (Automotive Parts And Accessories product review) for Innovative Products Of America 7862 Grease Joint Rejuvenator available as-of ( Feb 2019 ) |
Lumax LX-1404 Silver 90 Degree Grease Coupler
The zerk in the coupler fits very tightly on the gun and doesn't pop off. Those folks with retention problems likely need a new straight fitting for their grease gun. The 90 coupler fits the zerks on my atv very tight as it should. Snaps on and off fittings and the gun without having to be held in place by your third and fourth hands.
The 90 degree grease coupler is for use on hand-operated grease guns only. It is designed for hard-to-reach grease fittings on cars, trucks, farm equipment and is ideal for lubrication of front and all-wheel drive vehicles. It has quick connect, a spring loaded sleeve that locks coupler in place for angular applications, and is zinc plated for maximum protection against corrosion. It has a recommended working pressure of 3, 000 psi, a maximum operating pressure of 4, 500 psi, and comes complete with small and large quick-disconnect adapters to fit standard couplers.
Lumax-LX-1404-Silver-Degree-Coupler
Lumax Lx-1404 Silver 90 Degree Grease Coupler (lx1404) FAQ.
Every couple of days i get something that actually needs grease, and it usually ends up being in a hard to reach spot or too close to a rim to bend my grease hose. This adapter works great and has a nice design feature that i didn't expect. It is removable. Inside the sleeve below the spring is a standard grease nipple. When you need to get into a tight spot you can slip it onto the coupler on your grease gun and go, then when you remove it the sleeve covers any grease that might have oozed out -Notice from G. Meghan, New Brunswick
Click to Show lumax lx-1404 silver 90 degree grease coupler (lx1404) Details
Excellent time saver tool. I needed a fitting that would reach my center front axle zerk grease fitting on my john deere 120 rider. The straight fitting on my grease gun hits the frame and i was unable to grease the center axle. In order to grease that fitting you must unbolt the deck front brace and lower it. With this fitting it allows you to lube it without removing anything and saving a lot of time. The tool worked perfectly. If you maintain your own john deere this fitting will save you a lot of time. I high recommend it.

- V. JarvisEasy to install and works great, but it has a tendency to not want to release from the grease fitting in my application - a grease fitting on the mower deck of a john deere x300 tractor.
Bought these for my job. Made my life easier greasing bus chassis' that had a right angle fitting.
Z. Tracey, Quebec
LUMAX LX-1404 SILVER 90 DEGREE GREASE COUPLER Featured | |
---|---|
Price : | $10.00 (was $12.20) |
| |
Brand : | lumax |
Color : | Silver |
Weight : | 0.20 pounds |
Model : | LX-1404 |
Quantity : | 1 |
Order click here : | normally ships in 24 hours |
Automotive Parts And Accessories : | Best Auto Accessory (lumax product review) for Lumax LX-1404 Silver 90 Degree Grease Coupler available as-of ( Feb 2019 ) |
Lincoln Lubrication G905 Large 4-Way Grease Fitting Tool
Great quality and craftsmanship! very happy with this purchase and other lincoln items i have purchased.
If you ever run into damaged or broken grease fittings, you should have one of these inexpensive yet valuable tools in your toolbox. For over 90 years, service professionals have looked to lincoln for lubrication equipment designed to meet the demands of day-to-day shop life. In response to overwhelming requests, lincoln proudly makes its equipment available to those outside the service industry with our guardian line of lubrication products. Designed for life outside the shop, guardian brings you a level of performance previously unavailable in over-the-counter lubrication equipment. Every guardian product is engineered to meet the industry's most exacting standards for reliability and performance. Like all lincoln products, the guardian name is your assurance that what you're buying is no ordinary piece of equipment.
Lincoln-Lubrication-G905-Grease-Fitting
Lincoln Lubrication G905 Large 4-way Grease Fitting Tool (Loln Electric) FAQ.
I'm cheating again since this is the same as the smaller one. This is not a fancy tool that makes the top 10 tools in the world chart. It does however work wonders for those that deal with grease fittings still. It's simple a must have if things go wrong with a grease fitting or part that uses one. Threads easily, extracts broken pieces in a flash and makes installing and tightening simple as heck. Lincoln sells good quality tools and the price is good for that level of quality! -Notice from Q. Julie, Centre
Click to Show lincoln lubrication g905 large 4-way grease fitting tool (loln electric) Details
When your zerk fittings need attention, this is one of the tools that make service easier. I

- M. NewellNice tool to have around for those occasional fitting failures.
Seems fine
A. Wanda, Lambeth
LINCOLN LUBRICATION G905 LARGE 4-WAY GREASE FITTING TOOL Spotlight | |
---|---|
Brand : | loln electric |
Weight : | 0.21 pounds |
Model : | G905 |
Quantity : | 1 |
Order click here : | normally ships in 24 hours |
| |
Price : | $8.58 (was $11.40) |
Automotive Parts And Accessories : | Best Auto Accessory (loln electric product review) for Lincoln Lubrication G905 Large 4-Way Grease Fitting Tool available as-of ( Feb 2019 ) |