Superwinch 1125230 Handlebar Handheld Synthetic (Auto Accessory) 1773

Review for superwinch terra single line pull

Price was $287.37. I bought this to replace my warn 2500 that blew up on my '04 honda rancher. It was a perfect fit and the install was straight forward. A few people mentioned on these reviews that the rocker switch was reversed when wired as per directions (in made the winch let line out and vice versa). You physically had to swap two wires on the solenoid. I wired it exactly as the directions said and mine came out perfectly. Works awesome. . I had to use the winch a few times today. My atv got stuck a few times in the super deep snow. The winch pulled without breaking a sweat. I could not believe how quiet and smooth it runs. It made me realize just how loud my old warn winch was (before it blew up). It sounded like shaking a bunch of marbles in a coffee can. . I swapped out the steel cable to synthetic rope and and went with an aluminum hawse fairlead. I put a few u bolts on the end of the steel cable and use it as a spare extension to give you a few more feet in case there isn't a tree nearby. I wrapped it up and zip tied it under my rack. This winch is awesome and is soooo much better than my buddies' warn winches and my old winch. Buy this winch and save some of your hard earned money! do it now!

-E. Russell

Superwinch terra 25 2500lb/1134kg single line pull hawse, handlebar mnt toggle, handheld remote, synthetic superwinch terra 25 winch synthetic rope version comes roller fairlead, mounting plate, handlebar mount toggle, and handheld remote. steel drum is designed for use either cable or -superwinch 1125230 terra 25 2500lb/1134kg single line pull hawse, handlebar mnt toggle, handheld remote, synthetic rope

  • Details: 50′ Of 3/16″ Synthetic Rope And Ergonomic Cam Action Freespooling Clutch.
  • Details: All Steel Planetary Gear Twice As Wide As Those Used By The Competition And Utilizing Machined-in, Oil Pocket Bronze Bearings.

Price Fall Superwinch 1125230 Handlebar Handheld Synthetic (Auto Accessory) 1125230

Buy Now

Introduction

I mounted this model on a j. D. Gator 855d. It just fit. I haven't used it yet so i don't know how it will perform. I bought this through online store ware house. So the price was right. The problem was they listed it as damaged box. When i was installing it i noticed that the label said terra 35. This drove me nuts, the box said terra 45. I decided to call the mfg. Instead of online store because they would have had me send it. Back, which i didn't want to do since i had every thing apart. To make a long story short it turned out that i had a 45 with the wrong label. I am still waiting for them to send me the correct label . I am very good with installing equipment like this and it still took all day to install. It came with a handlebar mount switch which is really not the best fit for the gator, so i bought a rocker switch to fit in the dash, . Which they should have included with the winch since they say its also for a side by side like the gator. The Best superwinch terra single line pull as-of ( Sep 2019 ) | Superwh-Auto Accessory Review Details Superwinch 1125230 Terra 25 2500lb/1134kg single line pull with hawse, handlebar mnt toggle, handheld remote, and synthetic rope High efficiency, low amp draw, sealed 1. 3 hp permanent magnet motor featuring mechanical load holding and dynamic brake. 50' of 3/16" synthetic rope and ergonomic cam action freespooling clutch. All steel planetary gear twice as wide as those used by the competition and utilizing machined-in, oil pocket bronze bearings. Circuit breaker protected and weather sealed solenoid contact. Anodized aluminum hawse, heavy duty latched hook with thimble and limited lifetime warranty .

Superwinch 1125230 Terra 25 2500lb/1134kg Single Line Pull With Hawse, Handlebar Mnt Toggle, Handheld Remote, And Synthetic Rope Review (1125230)

Has everything you need to install on a sxs. I had to swap the cables around so i could use the longer ones to reach my battery on my pioneer 700. Havent had to use it yet, but sure it'll do the job. Lifetime warranty without the need to save proof of purchase. -T. Carol

Superwinch 1125230 Handlebar Handheld Synthetic

Rank
Automotive
Brand
Superwinch
EAN
0022705003438
Product Dimensions
Height:4.80 inches
Length:13.19 inches
Weight:14.99 pounds
Width:4.49 inches
Manufacturer
Superwinch
Guarantee
Parts
Model
1125230
MPN
1125230
Total-Items
1
Quantity
1
Part/Serial Number
1125230
Group-Order
Automotive Parts And Accessories
Category
AUTO ACCESSORY
UPC
022705003438
Warranty
Limited Lifetime Warranty

superwinch terra 25 2500lb/1134kg single line pull hawse, handlebar mnt toggle, handheld remote, synthetic Automotive Parts And Accessories, Superwinch terra 25 winch synthetic rope version comes with roller fairlead, mounting plate, handlebar mount toggle, and handheld remote. steel drum is designed for use with either cable or synthetic rope. Superwinch 1125230 Handlebar Handheld Synthetic (1125230-Superwh).

Superwinch 1125230 Handlebar Handheld Synthetic Automotive Parts And Accessories

superwinch terra single line pull Superwinch 1125230 Terra 25 2500lb/1134kg single line pull with hawse, handlebar mnt toggle, handheld remote, and synthetic rope (Switch to Mobile/Desktop Version)

I installed on my 2012 honda rancher 420, i also ordered the kfi products winch mount 100705 and kfi products atv-chs winch cable hook stopper. The installation was time consuming (due to my atv compact size) but easy install. I followed the directions for the winch and mount, one picked up where the other left off. I have not yet put it to a load test but functions just as described on first try. Everything included! winch, synth rope, hook, flylead, 10' remote, remote plug-in, handlebar mounted thumb switch, contactor, auto reset breaker/fuse, wiring, nuts bolts, and even wire ties (white, although i used black to be discrete). The quality and engineering of this item seems to be top notch! . Minor modification needed for the bumper cover and skid plate, (due to limited space on compact atv), but easily done with razor knife or dremel tool (i used both). Great price and fast 2 day shipping with online store prime made the deal all the sweeter!

Superwinch 1125230 Terra 25 2500lb/1134kg Single Line Pull Hawse, Handlebar Mnt Toggle, Handheld Remote, Synthetic Rope
Click to see NoticeSuperwinch 1125230 Handlebar Handheld Synthetic (Auto Accessory)"After much research and review i finally settled on this winch. I have owned severl different kinds over the years and have always been confused by the wide range of prices for the same size winch. Once i determined that the permanent magnet motor was suitable for my application it narrowed the field considerably. Reviews like this one helped a lot in the process. I mounted it on a polaris ranger and used a 2" receiver mount so i could pull from either end. Instalation was not difficult but be forewarned that this is not a fully self contained unit. There is a separate selenoid that must be mounted and wired into the vehicle ignition system. There is also a socket for the remote control cable that must also be mounted if you intend to use that feature. If i had it to do again, i would probably go wireless since i have found other uses for the winch and am usually by myself. Wireless would give me the range i need sometimes. I got the rope instead of the cable and i love it. Expensive option but well worth it in my opinion. I have used it to pull the ranger out of the mud on 4 or 5 occasions and so far it has worked flawlessly. Plenty of power and the clutch is the easiest to use of any of my previous winches. I am very satisfied."


Manual Winches » Power Winches » Superwinch 1125230 Handlebar Handheld Synthetic (Auto Accessory) 1125230


Superwinch 2302285 ATV Bow-Shackles pair

Superwinch bow shackle is designed to work with the winch and can also be used as recovery or pulling point. It facilitates wire rope and strap attachment safe and easy. This product includes 2 bow shackles.

Superwinch 2302285 ATV Bow-Shackles pairSuperwinch-2302285-ATV-Bow-Shackles-pair

SUPERWINCH 2302285 ATV BOW-SHACKLES PAIR Highlight
Brand :    superwh
Weight :    1.30 pounds
Model :    2302285
Quantity :    1
Order click here :    normally ships in 1-2 business days
  • Work as a recovery or pulling point for atvs
  • Make wire rope and strap attachment safe and easy
  • 2 atv bow shackles
Price :    $19.99
Automotive Parts And Accessories :    Best Auto Accessory (superwh product review) for Superwinch 2302285 ATV Bow-Shackles pair available as-of ( Sep 2019 )

Superwinch 2517 Recovery strap 2 x 20'

Superwinch recovery strap is designed to ease the winching activity. This recovery strap is made from nylon and is highly durable. It is suitable for winch use. This recovery strap features nylon slings. It is used efficiently for winching. This recovery strap is rated at a 15, 600 lb capacity. It measures 2 inches wide and 20 feet long.

Superwinch 2517 Recovery strap 2 x 20'Superwinch-2517-Recovery-strap-20

SUPERWINCH 2517 RECOVERY STRAP 2 X 20' Overview
Brand :    superwh
Size :    2" x 20' - 15,600 lb
Weight :    1.80 pounds
Model :    2517
Quantity :    1
Order click here :    normally ships in 1 to 2 months
  • Measures 2" x 20'
  • Simple to use
  • Enviroment friendly
  • Has a 15, 600-lb maximum vehicle weight capacity
  • Eases winching activity
Price :    $47.89
Automotive Parts And Accessories :    Best Auto Accessory (superwh product review) for Superwinch 2517 Recovery strap 2 x 20' available as-of ( Sep 2019 )

Superwinch 2302286 Kit - ATV Winch accessory Kit 8,000 lb pulley block, 1 x 8' Tree-saver, 1 bow shackle, gloves, nylon bag

Superwinch accessory kit includes pulley block, tree saver strap, leather-palmed gloves, 2 bow-type shackles and nylon storage carry bag. This accessory kit is designed to make winch activities more easier and safe. It features tree-saver strap to facilitate attaching winch hook to the load or the anchor point.

Superwinch 2302286 Kit - ATV Winch accessory Kit 8,000 lb pulley block, 1 x 8' Tree-saver, 1 bow shackle, gloves, nylon bagSuperwinch-2302286-Kit-accessory-Tree-saver

SUPERWINCH 2302286 KIT - ATV WINCH ACCESSORY KIT 8,000 LB PULLEY BLOCK, 1 X 8' TREE-SAVER, 1 BOW SHACKLE, GLOVES, NYLON BAG Spotlight
Brand :    superwh
Model :    2302286
Quantity :    1
Order click here :    normally ships in 3-4 business days
Automotive Parts And Accessories :    Best Auto Accessory (superwh product review) for Superwinch 2302286 Kit - ATV Winch accessory Kit 8,000 lb pulley block, 1 x 8' Tree-saver, 1 bow shackle, gloves, nylon bag available as-of ( Sep 2019 )
Price :    $86.34 (was $138.54)
  • Leather-palmed gloves protect the hands from injury while winching
  • Bow shackle makes wire rope and strap attachment safe and easy
  • Nylon carry bag is durable and eases transportation
  • Pulley block with 8, 000-lb capacity for heavy winching loads

Superwinch 1509 Tree-saver strap: 2 x 6'

Superwinch tree-saver strap is designed to ease the winching activity. This recovery strap is made from nylon and is highly durable. It is suitable for winch use. This recovery strap features nylon slings. It is used efficiently for winching and towing. This recovery strap is rated at a 15, 600 lb capacity. It measures 2 inches wide and 6 feet long.

Superwinch 1509 Tree-saver strap: 2 x 6'Superwinch-1509-Tree-saver-strap

SUPERWINCH 1509 TREE-SAVER STRAP: 2 X 6' Feature
Price :    $29.32
  • Eases winching activity
  • Simple to use
  • Enviroment friendly
  • Measures 2" x 6'
  • Has a 15, 600-lb maximum vehicle weight capacity
Brand :    superwh
Size :    2" x 6' - 15,600 lb
Weight :    0.95 pounds
Model :    1509
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (superwh product review) for Superwinch 1509 Tree-saver strap: 2 x 6' available as-of ( Sep 2019 )

Superwinch 2302284 Tree-saver Strap, 1 x 8'

Strap Seems Ok But I Was Disappointed After Opening The Package And It Stated That The Breaking Limit Was Less Than The Adveritsed 8000lb. If It's Less Than 8k Then They Should Say So Not Advertise More.

Superwinch tree-saver strap is designed to ease the winching activity. This strap is tough, versatile and very convenient for off-roader needs. This recovery strap is rated at a 8, 000 lb capacity. It measures 1 inches wide and 8 feet long.

Superwinch 2302284 Tree-saver Strap, 1 x 8'Superwinch-2302284-Tree-saver-Strap

Superwinch 2302284 Tree-saver Strap, 1" X 8' (Superwh) FAQ.

Quality Of Construction And Materials Is Excellent. I've Used It For Countless Extractions And Even Skidding Some Logs. -Notice from K. Julie, Torbay

Click to Show superwinch 2302284 tree-saver strap, 1" x 8' (superwh) Details

This Was A Gift For My Husband. He Likes To Go Jeepin' And Sometimes Needs To Winch Someone Out Of A Tricky Spot. I Was So Pleased To Find The Exact Item On Online Store!

Superwinch-2302284-tree-saver-strap,-1"-x-8'-(superwh) set picture

- S. JuneThis Is A Must Have Item Stashed Away Somewhere On Your Farm Tractor For Immediate Quick Grab Kind Of Work. A Hook On A Bucket Or A Backhoe And T-posts Can Be Pulled With No Problem Drag Large Down Trees Use It Help Keep A Load In/on The Bucket You Name It. Bought Two Though I Might Suggest Getting The 10' Length Rather Than The 8. Bought Them To Replace One That I Had To Slice Off A Log (don't Ask) And Guessed At The Length. One Of Those Longer Is Better After Thoughts.

SUPERWINCH 2302284 TREE-SAVER STRAP, 1 X 8' Features
Price :    $28.71
  • Enviroment friendly
  • Eases atv winching activity
  • Has an 8, 000-lb capacity
  • Simple to use
  • Measures 1" x 8'
Brand :    superwh
Weight :    0.60 pounds
Model :    2302284
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (superwh product review) for Superwinch 2302284 Tree-saver Strap, 1 x 8' available as-of ( Sep 2019 )

KFI Products ATV-SB Snatch Block

This Is Far Better Than Another Snatch Block That I Purchased That Has A Hook On It. I Have Used It To Give Me A 2:1 Mechanical Advantage Pulling Several Large Waterlogged Logs From A River And It Works Perfect Every Time. The Other Snatch Block Blew Apart On Me While I Was Pulling A Log And I Had To Put A Bolt Through It To Keep It Together.

Specifications: 8, 000 pounds rating (turns the 8, 000 pounds into 16, 000 pounds). Powder coated1-1/2 inch diameter holes for hooking. Over-all size: 3. 00 inch x 5. 75 inch x 1. 375 inch.

KFI Products ATV-SB Snatch BlockKFI-Products-ATV-SB-Snatch-Block

Kfi Products Atv-sb Snatch Block (Auto Accessory) FAQ.

Price Was Good But The Product Was Better. Great Finish. Mechanism Works Well. Paint Finish Is Good. Easy To Operate. Not Too Big And Bulky But Sturdy Enough. Use For My Polaris Sxs Quad. -Notice from I. Florence, Somerset

Click to Show kfi products atv-sb snatch block (auto accessory) Details

Product Is Exactly As Described. Good Quality Works Great Not Too Big For Storing In Utv. Highly Recommend To Anyone With An Atv Or Utv.

Kfi-products-atv-sb-snatch-block-(auto-accessory) set picture

- T. ClaraWow! I Have Not Got A Chance To Use The Snatch Block Yet. But Its Almost Guaranteed It Will Get Used Pulling Out Stuck Sxss And 4 Wheelers This Weekend. After Noticing The Drain Just A 1000lb Wench Puts On A Lawn Mower Battery. It Will Definitely Get Used Alot! I Was Really Surprised At How Small The Block Is And That Its Not Going To Take Up A Lot Of Space In My Sxs Tool Box That's A Big Plus!!!! Thank You Kfi Products! I Can See This Becoming My Go To Tool When Moving Large Tree Limbs Off My Property.

I Needed A Super-sturdy Set Of Snatch Blocks To Do Some Heavy Lifting ( 1000 Lb. Vertical Lifting And Some Serious Stump Pulling) And Bought These "hoping" That They Would Do The Trick And Help To Mitigate The Overall Load By Using Several Of Them Together. The Product Picture Doesn't Really Give You A Good Idea Of Just How Beefy These Are For Their Size But Let Me Tell You. These Bad Boys Are Big Thick And Heavy! These Aren't "pull-a-combine-harvester-out-of-a-mud-bog" -blocks (although They Might Just Do That Too) But As Another Reviewer Mentioned These Are Just The Right Size And Weight To Take Care Of Just About Any Pulling Or Lifting That You Will Ever Need To Do. Your Rope Or Cable Would Probably Give Out Before These Do. I Hope This Review Was Helpful To You In Making Your Decision.

O. Mable, Nevada

KFI PRODUCTS ATV-SB SNATCH BLOCK Overview
Brand :    kfi products
Weight :    2.00 pounds
Model :    ATV-SB
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (kfi products product review) for KFI Products ATV-SB Snatch Block available as-of ( Sep 2019 )
Price :    $12.75 (was $15.70)
  • Dark grey powder coated.
  • Over-all size: 3. 00in. w x 5. 75in. l x 1. 375in. d.
  • Doubles your winches lbs. rating.
  • 1-1/2in. diameter holes for hooking onto.
  • 3/16in. material.

WARN 92100 ProVantage Plow Base/Push Tube Assembly

Finding The Right Parts Can Be Pretty Confusing So Allow Me To Explain The Provantage System. The Entire Plow Consists Of Four Parts: 1. Vehicle-specific Mount Kit (one Of Many Part Numbers. Check . To Find The One For Your Particular Vehicle. ) 2. Push Tube Assembly (p/n 92100 Or 78100; Depending On Which Type Of Mounting Kit You Use) 3. A Plow Blade (p/n 78950 78954 78960 80954 Or 80960; Two Different Styles (straight Blade And Tapered) Three Different Widths (50" 54" 60") 4. Lift (usually A Winch W/ Roller Fairlead. Alternatively Warn P/n 84600 Is A Dedicated Lifter) For 1 And 2 There Are Two Basic Types: Center Mount And Front Mount. Most Vehicles Have A Center-mount Kit Available Many Have A Front-mount Kit. If You Have The Front-mount Kit Available I Would Recommend It As It Allows The Plow To Lift Higher. I've Found That It Lifts High Enough That I Can Reach Over The Front Rack And Turn The Plow Without Leaving My Atv. *** If You Select A Front Mount Kit You Need To Select The Front-mount Push Tube Assembly P/n 92100 *** If You Select A Center Mount Kit You Need To Select The Center-mount Push Tube Assembly P/n 78100 3 Is Self Explanatory Select From One Of 5 Blade Options. 4 If You're Buying And Installing A Winch Along With The Rest Of The Components Make Sure You Read The Instructions For The Front Mount. On Mine Parts Of The Front Mount Kit Replace A Couple Components On The Winch Mount Kit So Right After You Finish Installing The Winch Mount You've Got To Take It Apart To Install The Plow Mount. Because Of This I Strongly Recommend Buying A Warn Winch Mount Regardless Of What Winch You Put In It. Warn Winch Mounts Should Be Compatible With Warn Plow Mounts. Any Decent Roller Fairlead Will Work. Do Not Use A Hawse-style Fairlead. In Addition To Their Regular Fairleads (which Will Work Acceptably) Warn Sells A Roller Fairlead Specifically Designed For Plowing P/n 69373. This Fairlead Has A Very Large Bottom Roller To Reduce The Tightness Of The Bend And Extend Winch Cable Life. Warn Also Sells A 8' Synthetic Plow Lift Rope (p/n 68560) To Save Wear And Tear On Your Regular Winch Cable. I Recommend A Fast Winch - You'll Be Raising And Lowering Dozens Of Times While Plowing. Make Sure You Mount Your Winch Control In A Convenient Location - You Don't Want To Have To Reach For It Each Time. There Are A Few Useful Options Available: 1. Power Pivot (p/n 79360) - Electric Motor Rotates The Plow Blade. If You're Doing A Lot Of Plowing This Might Be Useful. 2. Bucket Loader Conversion (p/n 83133 84133 Or 85133 Depending On Blade Width) - Converts A Regular Plow Blade Into A Bucket Loader For Handling Loose Material (sand Gravel Topsoil Mulch Etc. ) There Are A Few Hangups You'll Have In Certain Situations. For Instance If You Want To Use An Assembled Plow On Two Different Model Atvs It May Or May Not Work. The Vehicle-specific Mounting Kit Contains Two "tabs" That Bolt On To The Push Tube And Allow It To Quickly Attach To The Mount. The Tabs For One Model May Or May Not Be The Same Height Or Spacing As Tabs For Another Model. If You're Trying To Have Two Plows For One Atv (one Regular Plow And One With The "bucket" Conversion) You'll Be Missing A Set Of The Aforementioned "tabs" For The Second Plow And You'll Need To Contact Warn To Obtain A Second Set. They've Been Sending Them Out For Free But Contact Them First To Confirm. Once You've Got All The Correct Parts Assembly Should Be Fairly Straightforward. Unfortunately You'll Be Reading From 3-5 Different Assembly Manuals Simultaneously One For Each Of The Parts You Purchased So It Can Be A Little Confusing. This Is My Only Real Gripe With The Whole Kit So Far.

The warn plow base assembly features an extra wide design for increased stability and durability, a forward trip system, and an interlocked rotating base plate for great strength, outstanding durability, and excellent impact resistance. For use with the warn provantage plow system with a front mounting kit only.

WARN 92100 ProVantage Plow Base/Push Tube AssemblyWARN-92100-ProVantage-Plow-Assembly

Warn 92100 Provantage Plow Base/push Tube Assembly (Auto Accessory) FAQ.

Went With The Warn Pro-vantage Plow Set Up For A Few Reason. Mainly Because It Allows The Plow Blade To Sit Closer To The Atv That Some Other Lines Out There. Also It Allows For The Blade To Be Lifted Higher Than A Center Mount Set Up. I Needed Both Those Clearences In Order To Lift The Blade Over My Wheel Wells In The Bed Of My Truck And For The Atv Along With The Plow To Fit Into My 8 Foot Bed. It Fits With 2 Inches To Spare. The 92100 Plow Base Is Very Heavy Gauge And Sturdy. It Has A Simple Design And Common Sense Assembly. The Common Sense Assembly Is Important Because The Assembly Directions Are Terrible. The Parts List And Corrosponding Part Numbers Don't All Match Up With The Needed Label Pointing Out Their Position In The Diagram. You Have To Figure Out By Counting The Number Of Bolts And Grouping Them Together To Figure Out Which Ones To Use For Which Application. Also With The Diagram A Lot To Be Desired. I Do Pretty Much Everything Myself. And If You're Like Me You'll Start To Look Around For The Other Pages Of The Instructions Once You See The Ones Provided. Its Like There Are Some Missing. All You Get Is A Parts List That Is Misprinted And A Diagram. Nothing Else Beside The The Standard "don't Run Wires Around Sharp Objects" Blah Blah Blah. So Very Sturdy And Heavy Duty Hunk Of Steel. Take Your Time With Assembly And Don't Waste Time Looking Online For The Rest Of The Instructions Because You'll Only Find A Pdf Of The Same Ones That The 92100 Came With. I Give It 4 Stars Based On The Well Built Construction And Simple Rigid Design. It Looses A Start Because Of The Terrible Assembly Instructions. For The Novice This Is One The You Might Not What To Tackle Yourself. -Notice from B. Annette, Medway

Click to Show warn 92100 provantage plow base/push tube assembly (auto accessory) Details

Hooking Up The Plow To The Atv Is Super Easy With This System. 2 Pins The Winch Rope And Away You Go To Plow. I Keep My Plow On A Small Movers Dolly When Not In Use. I Wheel It Up To The Atv Lift The End Of The Push Bars Into The Mounts Sockets Slip The Pins In Attand Attch The Winch In About 2 Minutes. When It's Time To Remove It For Play Set The Blade Back On The Dolly And Its Off In 2 Minutes Without Crawing Around On The Ground.

Warn-92100-provantage-plow-base/push-tube-assembly-(auto-accessory) set picture

- S. DonnaHeavy Duty Snow Busting Power. This Thing Is Huge And You May Need It For Where You Live. This Is The Second Warn Plow I Have Purchased One Stays At My Camp This One Will Be At My House. I Have Used The Warn Set Up For A Few Years Now And It Can't Get Much Easier To Use. The Only Thing You Need To Replace Is S***ty Plastic Piece That Winch Rope/cable Goes Through. I Have No Idea Why It Would Come With Plastic. But You Will Find Installation Very Simple The Blade And Mount Come With Directions The Push Tube Will Not. All Parts You Will Need Will Come With A Part Of The Kit (blade Push Tube Mount). Also Look At Warns Website To See If This Fits Your Quad. Online Store Says This Wont Fit My 2016 Polaris Sportsman. This Picture Says Otherwise. The One Thing I Would Recommend Is Getting Extra Lighting For The Plow Which The Top Of The Blade Is Already Pre-drilled So You Can Mount A Light Bar To. Anyways My Old Warn Kit Is A Few Years Old And Does Its Job Well I Will Continue To Buy As Long As Their Winches Quality Stays The Same.

I Love The Front-mount Plow System- It Just Makes Life So Much Easier When You Have To Attach Or Remove The Plow. I Have Had This Set Up On 2 Of My Machines Now And I Would Recommend It To Everyone Who Uses Their Atv Or Sxs To Plow. I Simply Pull The 2 Pins And Flip The Entire Plow And Push Tube Assembly Onto A Furniture Dolly For Easy Transport. When It's Time To Reattach The Plow It Easily Slides Right Back Into The Mounting Bracket. Put The 2 Pins Back In Hook Up With Winch To The Push Tube Ad You're Good To Go Again! This System Is Far Easier Than The Mid-mount Style Where You Have To Get Under The Atv To Attach The Push Tube. Plus With This System You Don't Lose Any Ground Clearance Nor Do You Have To Worry About Bending/breaking The Mounting Tabs Understate The Machine If You Bounce Off A Rock While Riding. This System Is Just Genius!

P. Theola, Hawaii

WARN 92100 PROVANTAGE PLOW BASE/PUSH TUBE ASSEMBLY Advantages
Brand :    warn
Weight :    6.00 pounds
Model :    92100
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (warn product review) for WARN 92100 ProVantage Plow Base/Push Tube Assembly available as-of ( Sep 2019 )
Price :    $130.41
  • Use on your atv with a warn provantage plow systems
  • An extra wide design for increased stability
  • Outstanding durability with excellent impact resistance
  • Forward trip system and an interlocked rotating base plate

KFI Products ATV-SCHS Winch Cable Hook Stopper

Never Used One Of These Before But So Far I Love It. Keeps Me From Having To Find A Place To Put The Hook So It's Not Flopping Around.

This split cable hook stopper is for the atv and utv winch. It weighs 4 oz. It is 2 5/8 inches wide and 1 3/4 inches thick. This kfi split cable hook stopper will fit between the two outside rollers on an atv or utv winch fairlead. It also works great with the synthetic rope and or the slot fairlead. Reasons to purchase a split cable hook stopper : eliminates wear and tear on your rollers from the hook. Eliminates hook clatter from going down the trail. Protects the winch motor and gears from pulling the cable in to far and bottoming out on the rollers. Keeps tension on the hook to eliminate the cable becoming loose. Looks great. Once you have one, everyone else that you ride, with will want one. Installation: note: wear leather gloves. 1) freespool winch and pull out approx. 2 feet of cable. 2) pull hairpin and release clevis pin from winch hook. 3) remove the four bolts fastening the two halves of the split cable hook stopper together. Place the cable or rope between the two halves. Insert the four bolts and tighten. 4) re-attach hook to cable end. 5) to stow hook, engage clutch and retract cable onto winch spool until hook is snug against the hook stopper and fairlead. 6) position hook stopper at approx. 3/4 of the total line distance towards hook while using you winch.

KFI Products ATV-SCHS Winch Cable Hook StopperKFI-Products-ATV-SCHS-Winch-Stopper

Kfi Products Atv-schs Winch Cable Hook Stopper (Auto Accessory) FAQ.

The Atv Winch Cable Hook Stopper Arrived On Time Worked Exactly As Advertised And Fits The Fairlead On My Particular Winch As If It Were Made For It. Since The Stopper Is Two Halves Bolted Together You Can Easily And Quickly Attach It To The Winch Cable Without Removing And Replacing The Cable Hook Which In Itself Can Be A Project. This Coming Winter's Snow Plowing Will Give Me An Idea Of How Well The Stopper Holds Up. -Notice from G. Tracey, Tower Hamlets

Click to Show kfi products atv-schs winch cable hook stopper (auto accessory) Details

Fast Delivery And Is As Described. I Recommend This To Any Winch Hook As This Product Will Greatly Help Against Having Your Wich Wire Or Rope Get Bound To Tight. Seller Is Also Very Responsive With Questions And Or Concerns.

Kfi-products-atv-schs-winch-cable-hook-stopper-(auto-accessory) set picture

- T. PatriciaReceived Fairly Quickly Through The Mail. Easy To Install. There May Be A Few Things I Would Change For Ease Of Install. The Bolt Should Be A Phillips Head Bolt Or A Hex Head Bolt Not An Allen Head. It Was A Pain In The Butt Holding An Allen Key And A Socket On The Other End Other Than That Easy Install. I Found That Attaching The Socket For The Nut To My Cordless Impact Made The Tightening Process Much Quicker Then Ratcheting Away. I'll Revise My Review After Further Usage Of The Stopper. Installed On Warn 2500 Lb Winch On A 2015 Honda Rancher 4x4.

Excellent Product For The Price. I Bought This To Put On The "tuff Stuff Performance 3/4" Synthetic Rope". I Knew It Would Be Too Small But The Price Was So Reasonable I Thought I'd Try It. I Was Able To Easily Enlarge The Opening With A Drill Bit And A Razor Blade And It Fits Perfect Nice And Tight. Does An Excellent Job Of Not Ruining My Hawse Aluminum Fairlead By Sucking The Hook All The Way In. Would Definitely Buy Again.

B. Cunningham, Leeds

KFI PRODUCTS ATV-SCHS WINCH CABLE HOOK STOPPER Review
Price :    $9.86 (was $12.39)
  • Keeps tension on the hook to eliminate the cable becoming loose
  • Eliminates hook clatter from going down the trail
  • Once you have one, everyone else that you ride, with will want one
  • Eliminates wear and tear on your rollers from the hook
  • Protects the winch motor and gears from pulling the cable in to far and bottoming out on the rollers
Brand :    kfi products
Weight :    0.20 pounds
Model :    ATV-SCHS
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (kfi products product review) for KFI Products ATV-SCHS Winch Cable Hook Stopper available as-of ( Sep 2019 )

K&N KN-113 Honda Powersports High Performance Oil Filter

I Am A Do It Yourself Type Person. An Atv I Inherited Needed Needed An Oil Change. I Read The Manual And Was Concerned That This Filter Doesn't Come With An O-ring. Honda Forum People All Said To Check The Condition Of The O-ring And Only Change It If There Is Damage. This Was The Very First Oil Change So There Was No Problem. This Was Perfect Imo

K&n powersports cartridge oil filters are designed to satisfy the needs of racers and engine builders as well as the average motorcycle or atv owner who wants the best oil filter available. K&n powersports oil filters trap harmful contaminants while the filter's construction allows for high oil flow rates. K&n oil filters are covered by a limited warranty to be free from defects in materials and workmanship when installed and replaced using engine and equipment manufacturer's recommended service intervals.

K&N KN-113 Honda Powersports High Performance Oil FilterKN-113-Honda-Powersports-Performance-Filter

K&n Kn-113 Honda Powersports High Performance Oil Filter (K N) FAQ.

Filter Didn't Not Have The Stamping The Original Filter Did Indicating Which Side "in" And Which Side "out" As The Original. However Product Was Just As Described. As Long As You Are Aware These Are A Directional Filter And If You Don't Replace It Correctly It Will Cost You The Motor You Are Just Fine. -Notice from N. Emma, Indiana

Click to Show k&n kn-113 honda powersports high performance oil filter (k n) Details

I Am A Fan Of This Brand From Audi To Toyota To Anything That Sucks Air To Mix With Gasoline Even My Little Honda Atv. Is It Better Than The Stock Filter I Don't Really Know. I Do Trust K&n To Make Products To Not Perform Without Failure And To Issue Each Product Without A Flaw And Considering What An Oil Filter Does I Am Willing To Pay A Little Bit More For That Peace Of Mind.

K&n-kn-113-honda-powersports-high-performance-oil-filter-(k-n) set picture

- C. CampbellOnly Wish That It Wasn't An "add-on" Item For Shipping Other Than That It Was Perfect.

Great Product! Works As It Should! Trusted Supplier All Online Store Awesome!

U. Nellie, Georgia

K&N KN-113 HONDA POWERSPORTS HIGH PERFORMANCE OIL FILTER Review
Brand :    k&n
Color :    Black
Size :    Fitment
Weight :    9..65 pounds
  • Allows high oil flow rates
  • High performance design for outstanding filtration
  • High-efficiency media with uniform pleats
  • Ideal for high-end synthetic motor oil
Price :    $4.14 (was $6.49)
Model :    KN-113
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (k&n product review) for K&N KN-113 Honda Powersports High Performance Oil Filter available as-of ( Sep 2019 )

Superwinch 2202921 ATV Mounting Kit

Fit was excellent, very good product and shipping was fast.

Superwinch atv mounting kit fits a honda 14-15 trx 420 rancher (straight axle), 2015 trx 420 rancher (independent rear), 2015 trx 500 foreman rubicon, 2014 trx 500 foreman (4-bolt winches only). It is designed to fit superwinch terra 25, terra 35, lt3000 atv, and lt4000 atv model winches. Superwinch mount kits include mounting brackets, hardware and installation instructions. This kit provides an easy and economical solution to mounting a winch to the vehicle. The mounting kit consists of parts that are corrosion resistant, made from high strength steel.

Superwinch 2202921 ATV Mounting KitSuperwinch-2202921-ATV-Mounting-Kit

Superwinch 2202921 Atv Mounting Kit (Superwh) FAQ.

Item fits correctly on a 2015 trx420 4x4 but instructions are not very helpful! better instructions would have given it the 5th star. -Notice from O. Eva, Utah

Click to Show superwinch 2202921 atv mounting kit (superwh) Details

Fit perfecly!

Superwinch-2202921-atv-mounting-kit-(superwh) set picture

- W. DebraInstructions kinda sketchy but eventually figured it out. Getting winch bolted up pain in ass.

Excellent !

A. Peggy, Lorraine

SUPERWINCH 2202921 ATV MOUNTING KIT Summary
Brand :    superwh
Weight :    4.40 pounds
Model :    2202921
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (superwh product review) for Superwinch 2202921 ATV Mounting Kit available as-of ( Sep 2019 )
Price :    $52.76 (was $65.95)
  • This superwinch mount kit fits a honda 14-15 trx 420 rancher (straight axle), 2015 trx 420 rancher (independent rear), 2015 trx 500 foreman rubicon, 2014 trx 500 foreman (4-bolt winches only)
  • This kit is designed to fit superwinch terra 25, terra 35, lt3000 atv, and lt4000 atv model winches
  • Sleek, durable, affordable and easy to install
  • Includes mounting brackets, hardware and installation instructions
  • Designed to mount a winch to the atv

WARN 78950 ProVantage 50 Straight Plow Blade

Blade Works Great And Is Fairly Easy To Install If You Are Handy Around Wrenches And Can Use A Little Umpf To Get The Springs Tensioned. My Only Complaint Is With The Height Adjustment On The Float Guides. They Are Not Even And The Spacing Seems Too Far Apart For Good Adjustments. I Might Be Too Particular But When I Adjusted The Right Side To Allow The Blade Edge To Be The Closest To The Floor/driveway The Same Hole On The Left Side Allowed The Blade Edge To Touch And The Guide Was 1/4'' Off The Ground. The Next Hole In Each Side Made The Blade Edge Too High To Get A Clean Removal. I Ended Up Not Even Using The Guides For This Reason And At The Cost Of Quicker Blade Edge Wear. Very Heavy Duty Blade As Others Have Commented. Yes I Would Buy Again But I May End Up Tweaking The Guide Adjustments Myself.

The warn provantage atv and side x side plow systems have been designed from the ground up to be the most versatile, durable, and high-performance plow system on the market. It's easy to connect. It's heavy-duty. It's engineered to perform. And with a variety of useful, innovative accessories, it's the most complete plow system money can buy.

WARN 78950 ProVantage 50 Straight Plow BladeWARN-78950-ProVantage-Straight-Blade

Warn 78950 Provantage 50" Straight Plow Blade (Auto Accessory) FAQ.

This 60in Provantage Plow Blade Is Very Heavy Duty Steel And The Wear Blade Is Heavy Duty It Came With The Heavy Duty Springs Which I Didn't Know Because It Doesn't Say Anything About That So Have To Return The Other Ones I Ordered. It Had The Brackets For The Maker Poles And Holes For The Rubber Flap That Goes On Top. So No Drilling Like Other Plowing Blades. This Plow Blade Really Surprised Me At How Great The Quality Was For The Price. ( $228 ) And Free Shipping And Very Fast Shipping. I Have Seen Other Blades That Were $600 And Wasn't Half As Good As This One. I Will Tell All My Friends About This Blade. -Notice from Z. Paige, Doncaster

Click to Show warn 78950 provantage 50" straight plow blade (auto accessory) Details

This Blade Appears To Be Excellent Quality. I Haven't Had The Opportunity To Use It Yet But It's Installed On My Atv And Ready To Go. I Expect It To Make Short Work Of My Driveway And The Cul-de-sac. If The Neighbors Are Nice I'll Use It For Them Too. If I Remember I'll Come Back After I Use It To Add A Star If It's Worthy.

Warn-78950-provantage-50"-straight-plow-blade-(auto-accessory) set picture

- C. ShirleyAs Soon As I Saw The Name Warn I Was Confident In This Purchase. Warn Is A Well Known Brand That Makes Superior Products. True To Form The Snow Blade Did Not Disappoint. Not Only Is It Durable And Sturdy I Had The Choice Of 3 Different Blade Lengths.

High Quality And Heavy Duty Plow. For A Kubota Rtv 500 I Wouldn't Go Any Bigger Than The 60. Instructions Were Straight Forward. The Wear Strip Was Also Nice And Heavy Duty. I Haven't Upgraded With Additional Attachments But There Are Some Available That Would Make My Plowing Better With This Small Blade In My Big Drive. Would Buy Again.

J. Sherry, Derbyshire

WARN 78950 PROVANTAGE 50 STRAIGHT PLOW BLADE Review
Brand :    warn
Size :    50 inch
Weight :    56.21 pounds
Model :    78950
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (Automotive Parts And Accessories product review) for WARN 78950 ProVantage 50 Straight Plow Blade available as-of ( Sep 2019 )
Price :    $160.10
  • Made from thick 12-gauge steel
  • Heavy duty ribbing
  • Center cross member for added rigidity
  • Boxed design adds extra support

KFI Products ATV-CHS Winch Cable Hook Stopper

Purchaed This When I Order My Terra 35 W/synthetic Rope On My Winch. It Works Great & I Don't Worry About Damaging My New Rope. Big Plus I Don't Hear The Hook Rattling When Driving. Would Recommend.

Winch cable stopper for kfi winch kits

KFI Products ATV-CHS Winch Cable Hook StopperKFI-Products-ATV-CHS-Winch-Stopper

Kfi Products Atv-chs Winch Cable Hook Stopper (Auto Accessory) FAQ.

My Son Wore Out The Cheaply Made Snubber That Came With His Winch And After A Little Research Kfi Seemed To Be The Answer. Glad We Ordered This Snubber Probably Wear Out The Winch Before We Replace This Snubber Again. So If In Doubt I Highly Recommend You Buy This Product From Kfi !! -Notice from V. Kelly, Rhode Island

Click to Show kfi products atv-chs winch cable hook stopper (auto accessory) Details

This Fit Perfect On My Falcon 3500 Winch. Took Off The Hook And With A Little Leverage From Some Pliers It Slid Right On. Fits Perfectly Between The Sides Of My Fairlead. Couldn't Be Happier With It. Great Deal At $12 And Some Change. I Put A Picture Up Of The Great Fit

Kfi-products-atv-chs-winch-cable-hook-stopper-(auto-accessory) set picture

- U. CathyI Read All The Horror Stories About Installation Of Other Cable Stopper Products And I Decided To Purchase The Kfi Winch Cable Stopper For My Warn Winch. It Took Me All Of 1 Minute To Install And It Is Rock Solid. No Problem At All Getting The Cable Through The Stopper.

This Stopper Looks Cheap But It's Solid Rubberized Material. The Cable Loop Passes Through The Slits Snuggly. Let It Dangle Outside The Fairlead Rollers So The Retracting Cable Can Reel In Evenly On The Cable Spool. Stuffing The Stopper In Between The Fairlead Roller Causes The Cable To Feed Into The Middle Of The Spool And That's A No-no. Take My Word For It.

Y. Erickson, Alaska

KFI PRODUCTS ATV-CHS WINCH CABLE HOOK STOPPER Spotlight
Brand :    kfi products
Size :    N/A
Weight :    0.38 pounds
  • Unlike all other mount competitors our mounts are metal bead blasted before they are powder coated for the best possible finish preparation
  • Constructed of 3/16 inch steel
  • Powder coated black for supreme durability; easy to install
Price :    $12.90
Model :    ATV-CHS
Quantity :    1
Order click here :    normally ships in 1 to 3 months
Automotive Parts And Accessories :    Best Auto Accessory (kfi products product review) for KFI Products ATV-CHS Winch Cable Hook Stopper available as-of ( Sep 2019 )

Keeper 02612 6' x 2 Lift Sling

Keeper performance engineered slings are made from hi-test webbing and meet wstda standards. These polyester web slings with flat eye to eye loop ends are versatile slings for general use. Use in choker, basket or vertical hitches. Heavy duty fabric covered loop ends are more durable. Tapered eyes are standard on slings over 3" wide. The 2", 1 ply slings have vertical/choker/basket capacities of 3100lb/2480lb/6200lb and have a class 7 rating that uses 20, 000lb webbing (9, 800lb webbing per inch width minimum).

Keeper 02612 6' x 2 Lift SlingKEEPER-02612-Keeper-Lift-Sling

KEEPER 02612 6' X 2 LIFT SLING Benefit
Brand :    keeper
Size :    6 Foot x 2 Inch
Model :    02612
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (keeper product review) for Keeper 02612 6' x 2 Lift Sling available as-of ( Sep 2019 )
Price :    $7.91 (was $9.34)
  • 9, 400 lbs. basket rated capacity
  • 1 ply, 6' x 2" lifting sling with flat loops
  • 3, 100 lbs. vertical rated capacity
  • 2, 480 lbs. choker rated capacity
  • Lighter and easier to use than a chain

2-Pack of 3/4 Black D-ring Shackle, 4 3/4 tons WLL

Use these for our fleet of jeep kaiser m715s. They work great and you can't beat the price. Never had one break or bend after hundreds of recoveries.

Our shackles are zinc plated, then powder coated for maximum rust prevention. We know the powder coating will get dinged during normal use. The zinc undercoating adds a second layer of rust protection. Few of our competitors do this as it's an additional expense. Our shackles have a 4. 75 ton, certified working load limit (wll). Works perfectly with all our tow straps, snatch blocks, snatch straps and tree savers. All reviews are real. We do not discount or give away products for reviews.

2-Pack of 3/4 Black D-ring Shackle, 4 3/4 tons WLL2-Pack-Black-D-ring-Shackle-tons

2-pack 3/4 Black D-ring Shackle, 4 3/4 Tons Wll (Tgl) FAQ.

Heavy duty and made to last. I use it to hook to my come-a-long, then to a strap around a tree, to remove the tree. The only two issues i saw was the paint came off on first use (which the seller mentions it's also coated, so not the reason i deducted a star). The reason i deducted a star is because the bolt (for lack of better word) that screws in, is tough to get in at times and get started. -Notice from W. Rhonda, Walsall

Click to Show 2-pack 3/4 black d-ring shackle, 4 3/4 tons wll (tgl) Details

Thick and heavy, capable of being used for a good tow rope! packaged in bubble wrap and nothing fancy, but decently easy to store in the back of a truck or in your spare tire compartment, provided they are not too full of other extras. To be fair however, i have not used these, and i hope i never do. But these are capable of pulling my truck if needed.

2-pack-3/4-black-d-ring-shackle,-4-3/4-tons-wll-(tgl) set picture

- X. OlgaMy jeep is tank green and black. I have slowly been working on getting every other color off of the jeep, (for example, i have black background led headlights, the rear lights have covers, the front fender lights have been changed to smoked led's) i purchased a new front and rear bumper to replace the incredibly fragile stock bumpers. The replacement bumpers came with d-rings, which is great both cosmetically and functionally, but they were silver in color which i did not find visually appealing at all. I tried initially to spray paint the silver ones, but was dissatisfied with the results. So, instead i decided to purchase black d-rings for that purpose. I had to buy two sets as both the front and the rear had a pair of shackles. These came well packaged and un-damaged. They look exactly like in the picture. The threads all work well and they securely attach to the jeep. I feel quite comfortable knowing that i have these on my vehicle in case i need to pull myself or others out. They rattle a little bit on the bumper, but i purchased the rubber isolators which help a lot. I would not hesitate to purchase this again in the future.

 all i can say is you can t go wrong with tgl. So far i have 2 straps and 2 shackles they are great! . I love tgl products. These are ¾ in d-ring shackles 4 ¾ work load limit are the best. They are heavy and strong and are prefect with the tgl tow straps i bought. My nephew has a large suv and 3 teenage boys with older model cars that like to break down a lot. So, i bought these for him and his boys. They need something strong, durable and reliable. I believe these shackles will last the boys lifetime and land their kids lifetime. I am very impressed and happy with these shackles. You can beat tgl and their prices.

Q. Dorothy, Victoria

2-PACK OF 3/4 BLACK D-RING SHACKLE, 4 3/4 TONS WLL Benefit
Brand :    tgl
Color :    Black
Size :    2-pack D ring
Weight :    2.27 pounds
Model :    34-DR2PK
Quantity :    1
Order click here :    normally ships in 24 hours
  • Works perfectly with all our tow straps, snatch straps, tree savers and snatch blocks
  • Ce certified at 4. 75 tons wll
  • 3/4" diameter body with 7/8" diameter pin (see 3rd picture for detailed dimensions)
  • Drop forged steel
  • Powder coated black, zinc plated undercoating for maximum rust prevention
Price :    $15.99 (was $17.99)
Automotive Parts And Accessories :    Best Auto Accessory (tgl product review) for 2-Pack of 3/4 Black D-ring Shackle, 4 3/4 tons WLL available as-of ( Sep 2019 )

KFI Products 101175 Winch Mount

Worked As It Should. Kind Of Worried Because I Had Bought A Badland 3500lbs Winch Before I Bought The Mount And The People At Ksi Said It Would Not Work Because The Winch Was Physically Too Large. Fit Perfectly On My 15 Rubicon 500 Just Had To Trim The Front Skid Guard A Little To Fit Around The Body Of The Winch. So In Short It Will Fit A Badland 3500lbs Winch And The Fairlead Will As Well

Kfi winch mount for honda trx420 and trx500 2014 foreman and rubicon designed to work with the following w inches: kfi: s2000/a2500/a3000/se25/se35 warn: a2000/a2500/u2500/1. 5ci/2. 5ci/2. 5ce/3. 0ci/3. 0ce/3. 0s warn: rt25/rt30/xt25/xt30 warn: vantage 2000-3000 pounds/provantage 2500-3500 pounds ramsey: atv2500/atv3000 superwinch: lt2000/lt2500/lt3000 mile marker: pe2. 5/pe 3. 5/vmx2. 5/pe2000/pe3000/pe2500/pe3500 master lock: 1500 pounds 2955at - requires a fairlead with a 4. 875 inches bolt pattern (available if needed atv-rf) cycle country: work power 1500 and 2500/powermax 2500, 3500 badland: 2000lb 68146 - requires the correct fairlead with a 4. 875 inches bolt pattern (available if needed atv-rf) - listed models come with incorrect atv roller fairleads badland: 3000 pounds 68145 champion: c10013/c10014/c10018/10020/10024/12053/12503/13501(requires rollers) champion: 10028/10032/12001/12002/13001/20049/20051/20249/30045/30145 - requires the correct fairlead with a 4. 875 inches bolt pattern (available if needed atv-rf) - listed models come with incorrect atv roller fairleads keeper corp. Trakker: kt2500/kt3000/kt2500c/kt3000c keeper corp. Trakker: kt2000 - requires purchase of a roller fairlead (kfi atv-rf).

KFI Products 101175 Winch MountKFI-Products-101175-Winch-Mount

Kfi Products 101175 Winch Mount (Auto Accessory) FAQ.

This Fit A 2015 Rancher 4x4 With No Problems. I Put On A Warn Provantage 2500 And Everything Fit Like It Should. -Notice from M. Sally, Mississippi

Click to Show kfi products 101175 winch mount (auto accessory) Details

Bought This Mount For My 2014 2wd Rancher 420. Installed Superwinch Terra 2500 Winch On Mount. Mount Is Good Quality With Very Detailed Instructions. I Am Very Pleased. Comes With All Mounting Hardware And Is A Great Value.

Kfi-products-101175-winch-mount-(auto-accessory) set picture

- Q. MelissaVery Sturdy Nice Fit And Finish. Recommended For Anyone Looking To Install A Winch On Their 2014 Rancher. Fits A Warn Winch Perfectly.

For My New 2015 Honda Rubicon Deluxe Model Warn Recommended Winch Plate Was A Several Peice Unit That Had Too Many Bolts And Nuts. This Kfi After Market One Was Way Simpler To Install. Great Product And Great Price

C. Barbara, Michigan

KFI PRODUCTS 101175 WINCH MOUNT Reviews
Brand :    kfi products
Weight :    1.00 pounds
Model :    101175
Quantity :    1
Order click here :    normally ships in 24 hours
  • These mounts are metal bead blasted before they are powder coated for the best possible finish prep; powder coated black for supreme durability
  • Very easy to install; complete installation instructions included
  • All mounting hardware included; satisfaction guaranteed; roller fairlead and winch not included
  • 100 percentage made in usa and constructed of 3/16 inch steel
Price :    $41.21
Automotive Parts And Accessories :    Best Auto Accessory (kfi products product review) for KFI Products 101175 Winch Mount available as-of ( Sep 2019 )

superwinch 1125230 terra 25 2500lb/1134kg single line pull with hawse, handlebar mnt toggle, handheld remote, and synthetic rope Price : 191.46, was : 224.57 as 2017-03-21
USUKDEFRESITJPCNCAGlobal
United States
Great Britain
German
France
Spain
Italy
Japan
China
Canada
World Wide
Superwinch 1125230 Handlebar Handheld Synthetic (Auto Accessory) Reviewed by on jerdus.com

Top superwinch 1125230 handlebar handheld synthetic (auto accessory) Content

The F.A.Q. for superwinch 1125230 terra 25 2500lb/1134kg single line pull with hawse, handlebar mnt toggle, handheld remote, and synthetic rope

Wow, what a winch, and what a price! for the money, you cannot beat this winch. Move over warn, superwinch is gunning for your market share and doing a great job of it. Quality product for a great price value that you can't beat. I love this winch and it's proven itself time and time again. It was easy to install, takes a beating and keeps on ticking. Very high quality product for my 2015 honda rancher fa5 (i used the kfi mount specifically for this model atv and it worked perfect, though snug/tight).

A number of questions have been asked here.

Q&A

(0) Question: hi again. is the 1145220 terra 45 winch strong enough to pull a 4000 pound car on a trailer? thank jerry


(1) Question: does it come with the mounting plate or do you purchase it seperatly?


(2) Question: what is the feet per minute line speed


(3) Question: do i need a mounting plate for my john deere gator 825i?


(4) Question: does this come with everything you need to mount it and have it operational with an arcticcat 500 xt efi ?


(5) Question: i bought the terra superwinch #1135230 & mounuting plate #2202890, do i need the roller fairhead plate & if i do what would be the part #?


(6) Question: does it come with all the same electrical parts as in the picture of the superwinch 113520 terra


(7) Question: what mounting plate works with a honda pioneer 700-4 ?


(8) Question: can you reverse the winch with the remote


(9) Question: is this water prrof



(note) Question: where/how to get Superwh (manufacturer's brand) accessories & similiar Superwh's products

Answer:

Click the marked text to copy link to Clipboard

Great packaging and good looking product. The wiring and terminals are well made and switches/relay are well made and thought through. The installation was very easy with the exception of routing of all the wires which has nothing to do with the quality of this kit. The only issue i had was the four bolts that attach the winch to the plate; they should be grade 8 and i'm not sure they are even grade 5. I had one of the nuts strip out after only applying moderate torque. This can be easily fixed by replacing the bolts and nuts with grade 8 hardware. After install everything worked smoothly and very well. I haven't had a chance to use it yetin the field but i have no doubt it will work very well.


Automotive 18148651, Exterior Accessories 11575851, Towing Products & Winches 15273751, Winches 19573751Top Superwinch 1125230 Handlebar Handheld Synthetic (Auto Accessory) FAQ Content

Best superwinch 1125230 handlebar handheld synthetic (auto accessory) in review

Five stars for now. Have only used a handful of times. Installation was pretty straight forward. Im not overly mechanical and i found it pretty simple. Luckily, the dry box under my seat has a lot of space for mounting the solenoid and breaker. I'm sure if you have a small area, you'll want to shorten the cables, as they come with very long cables that have slack even when ran all the way to under the seat of a 4 wheeler. Looks good and operates good so far, seems to be a good deal for the price. I did have to modify my bumper guard to fit the 3500lb winch in there, as it's pretty thick on the engage/disengage side.

F. Megan, City of Kingston upon Hull

You might like to see 200 metric & sae hydraulic lubrication grease zerk fittings assortment set red hound auto deluxe 200-piece sae and metric grease fitting kit. this premium red hound auto deluxe 200-piece sae and metric grease fitting kit has been designed tough and made from -200 metric & sae hydraulic lubrication grease zerk fittings assortment set kit
  • Characteristic: Ideal For Garage, Shop And Automotive Applications.
  • Characteristic: Heavy Duty Steel, Zinc Plated For Rust Resistance.
Price Cut Metric Hydraulic Lubrication Fittings Assortment (Auto Part) Metric Hydraulic Lubrication Fittings Assortment (Red Hound
Or you might like to consider 2pc 4 awg gauge red black battery post inverter cables solar, golf car rv used for automotive starters, battery grounds where resistance to abrasion, heat and aging is needed -2pc 4 awg gauge red black battery post inverter cables solar, golf car rv boat
  • Additional: Switch To Starter.
  • Additional: 4 Gauge.
Lower Price Gauge Black Battery Inverter Cables (Auto Part) Gauge Black Battery Inverter Cables (Unique

Z. Pete, Norfolk says

Installed on my 2015 grizzly 700 eps se. Has plenty of torque, enough to drag my 4 wheeler up a sand hill in the creek with the brakes locked effortlessly. The motor is nice and quiet and can barely hear it over the stock exhaust. The synthetic rope is great, but keep in mind it has to be cared for and cleaned. Wrapping it tight on the drum will keep the rope from burying itself when its put under a load. Just tie off to a truck and have a buddy lightly brake while you guide the rope on the spool. Either way its better than cable imo despite not being as abrasion resistant. I highly recommend the factor55 prolink xtv. It is a way better option for recovery than the plain hook. . The supplied 6 gauge wire was more than enough to run to the very back, if your 4 wheeler has a battery installed at the rear. On the grizzly, the battery is under the front rack, so i had to cut 6 feet off every cable and crimp/solder new terminals to make a nice clean install. Speaking of wiring its very simple and the solenoid and winch is color coated for which wire goes where. . Pros: powerful motor, steel drum for synthetic rope, plenty of cable for installation, quiet operation. . Cons: circuit breaker is not the best for mounting. Its all exposed 12v on the body so you have to isolate it from coming in contact with metal. Large heat shrink in a few layers will solve this problem. But i feel they could have supplied one with a plastic body instead. Oh well, its an easy problem to fix.

J. Lisa, Salford

I bought the 3500 winch on online store because i burned up a lighter duty winch on my quad. Without a doubt, i definitely recommend at least a 3500 winch with a synthetic rope. Once you go synthetic you will never go back to a wire rope. Wires, or should i say cables, are heavy duty and they give you enough so hiding them can be challenging because they aren't too flexible. . I followed directions and realized that the winch does not spool in from the bottom as it should. After double and triple checking my wiring, i finally called superwinch. Somebody actually answered ( which is a miracle anymore) and informed me that the wiring instructions are incorrect ! i was told to reverse the wires on the winch and it will spool in from the bottom. He said that a bunch of winches went out that have the incorrect wiring instructions. He also informed me that the terra series winches are not made in the usa which surprised me. I reversed the wires and it spools in from the bottom as it should. Also, i said that the handle bar toggle switch is reversed. Usually when you hit the bottom of the rocker it should be " in " and top of the rocker should be "out" . He agreed and said that was "odd". This switch is reversed and you cannot flip it around on your handle bars. Winch operates quietly and seems fine. I only used it for plowing as of now and will give it a true test later. I ran wires along frame and wrapped the wires in electrical tape for protection. I then hooked up the plug for the remote and stored it in my bag i have mounted on my rear rack. This will allow me to have lots of mobility in the event i have to use the remote. . Winch seems well built. It is heavy and operates smoothly. Very disappointed that it isn't made in the usa. I hope the wiring instructions snafu doesn't reflect the quality of the winch. I guess time will tell. Superwinch's customer service was excellent. The price on online store was the best i found and if you are not worried about it not being made in the usa i would recommend buying it.

Q. Guest, Sachsen-Anhalt says

Put this on my loader forks for pulling out trees and it works just fine. I'm pulling out 5"trees using a pully block. Pull to stall point and listen for the roots to start popping and hit the switch again. It keeps popping more roots and there it comes. I put this on my forks so when i pull it pulls the forks into thr dirt making this my anchor. I use the winch only 1 or 2 times a month and it seems to work for me. The only problem i had was the roller bent up because of the angle i was at. Roller mount is a little weak but bent it back and your good to go. I hoped this helps

G. Elizabeth, City of Kingston upon Hull

Terra 45 winch looks very nice. I installed on the front of a 2015 honda pioneer 500 by making a mounting frame from 2" (3/16" thick wall) square tube. I haven't had a chance to try the winch as of yet but the included power cords were plenty long enough to mount the winch in the front and reach the battery box in the rear. The in/out switch i spliced into the accessory outlet for power to the solenoid.

H. Guest, Pennsylvania says

Nice winch. Very strong. I installed it on my 2013 polaris ranger crew 800. The blue anodized aluminum fairlead almost perfectly matches my ranger's paint. . This was my first winch installation, and it took me about an hour or so. Be sure to use the correct set of instructions for your application. If your machine's battery is in the rear, there's a bit different wiring schematic to follow. . It came with a hand-held remote and a switch to mount on the dash (or wherever). I bought the suggested mounting bracket, and it worked perfectly. It was nice that i didn't need to buy anything else to finish the job. With no chance of grabbing a sharp broken steel wire, i really like the synthetic cable. . I've used the winch several times in the last 4-5 months, with no problems whatsoever. I even used it to move an old shed (10'x10') about 100' on my property that hadn't been moved in 20+ years. The shed had a bunch of old stuff inside, and i figure weighed 2000+lbs. This isn't huge, but the skids under the shed were probably 4" in the ground, which definitely gave a lot of resistance. I obviously had to hold the brake, but the winch showed no sign of weakness. . Highly recommended. I'll definitely buy superwinch products again for future toys.

A. Bullock, Leicester

I bought this on black friday for a real good price($168). I needed to pull a non running car up a 40 ft long incline than onto a trailer. It made very light work of that job. I later used it to pull some pine trees out of the ground which it also handled with ease. I than used it to recover some beams from an old barn that fell down. That involved some pretty hard pulls and it actually started moving the back end of the 3/4 ton diesel truck i had it attached to via the receiver, but it never stopped pulling. (truck was on snow) it has done everything i have asked without issue and seems to be plenty strong. I made an adapter that allows this winch to be plugged into a receiver and had it hooked up to a 1/2 ton extended cab long bed that weighs 6200 lbs. On a gravel drive with all four of the trucks wheels locked, it pulled the truck. Simply an amazing little winch. . Only 2 complaints:. The wire rope kinks if you do not wind it back on the drum neatly while pulling hard. I may have been better off getting the synthetic rope version. . My biggest complaint is that i wired it up exactly as the directions said to and out is in and in is out. That really bugs me since i made a nice receiver mount with a box to house the electronics and cut all the wires to fit neatly, so i can't swap it without buying more wire.

U. Alberta, Suffolk says

The winch seems like it will be fine. Other than testing, i haven't put it to good use yet. I was a little upset that the battery cables were relatively short to hook it to the solenoid. Instructions said to mount in a dry place, so i picked the upper "firewall" of the polaris rzr. Unfortunately the battery cables were not nearly long enough for that. It was either mount it by the battery (under the seat, prone to submersion), or buy more wire. I opted with buying 6 ga wire (about 20 feet total) to complete my install on the upper firewall. I was also upset that the circuit breaker did not have an isolation box. To use this breaker you have to hook the positive (+) side to the battery and the other side to the positive (+) portion of the solenoid. This is fine, except the contacts are exposed metal plates that the circuit breakers are hooked to; so there is no bolting it down to metal (it would short out) or any real way to secure it from possibly touching metal. I purchased a dry electrical box at lowe's and made a isolation box on my own. Obviously you don't have to use the circuit breaker, but it is a good idea. Other than that, there is plenty of wiring for the thumb switch, the remote plug, the remote wire, and the contact wires from the solenoid to the winch. The instruction manual was adequate, and everything needed for installation to the mount was there.

I. Edith, Ontario

This is by far the best winch i have purchased and for the price, i have owned several winches, warn, venom, extreme, torx and so on and for the price you cannot beat this winch. The pull power is awesome, ease of installation. Instructions are vague but if you have installed a winch its a snap. They didn't cut any corners at all it seems on this winch and i couldn't be happier. I was always unhappy that i settled for the less expensive winch on my utv and i am certainly glad it finally gave out and i ran across this one. It beats the honda warn winch and the price tag of 649. 99. Now the most amazing part is the quietness of the motor, it was unreal compared to warn, venom extreme this is almost whisper quiet and the utv is just a little louder. No more racket and sounding like things are coming apart. I strongly recommend this if you are looking for a good by and a great product!

H. Rochelle, Michigan says

This review is only for installation - haven't needed to use it yet. Everything was in the box as advertised, arrived promptly, online store prime (free shipping) rocks! installed on 2007 polaris sportsman 700 with the separately purchased superwinch 2202863 atv mounting kit. I used the fairlead mounting plate that came in the mounting kit, instead of the plate that came with the winch, only because it doesn't stick out in front as much. All the holes and dimensions lined up perfectly. Had to "reverse" a couple of sets of bolts due to tight clearances. Mechanically this thing is rock solid. The motor operates smooth and quiet, unlike the polaris plow motor i'm replacing. The old set-up had the polaris motor mounted on the back of the snow plow blade, and it always sounded like it was groaning and dying; in fact i had replaced it twice under warranty, and now polaris no longer makes that motor. Hence the superwinch. Key points i would share concerning installation:. 1. There isn't much extra space on my bike (under the seat) to mount the solenoid and tie-off the excess length 6 awg wires. 2. The circuit breaker design is just plain bad, consisting of a metal plate for the electrical connections. This is on the battery positive side of the circuit, so it can't touch any other metal part of the bike frame, etc. I wrapped the whole thing in electrical tape and it basically hangs by the wires - will have to keep an eye on this. 3. The polaris front "grill" assembly with headlights, etc. Would not re-install without a slight trimming (1/8" to 1/4") across the bottom side of the opening (under the mounting plate). Was able to do this with a utility knife. 4. I was able to reuse the polaris handlebar mounting arm to attach the new toggle switch (same screw hole dimension) - much cleaner look. 5. The remote toggle switch was easy to mount, to the left of the ignition key on the "dashboard" - there was a rubber blank there, and i merely filed the hole to be large enough to fit. . Now i'm looking forward to using this awesome winch!

B. Weber, Berlin

I bought this to replace a harbor freight winch. The only comparison is they're both winches. This superwinch is awesome! everything about it screams awesome! the winch itself, the cable, the wiring, the handle bar switch - all awesome! there was way more than enough wiring to reach the battery. The wiring is very flexible. The included schematic in the directions is easy to understand. The only issue i had was getting this to fit in the poorly designed rancher front end. It's like honda made it difficult on purpose requiring some drilling of the push bar mounts where it connects right behind and above the winch. I am totally happy with this winch. Thank you superwinch.

N. Valdez, Michigan says

Great winch perfect fit for can am outlander lmax 2016. No winch plate needed. Mounted right up. Buy a rubber hook stop to keep your hook from being sacked through the rollers. I spoke to a can-am dealership on her about how much it would cost me to have a winch installed and it's a 7 to an $800 option and they will only mount if i'm not mistaken warn winches or something made by bombardier the superwinch is absolutely perfect and it'll save you hundreds and hundreds of dollars stay away from the dealership install it's a complete rip-off. Find yourself an atv mechanic on the side if you need help it beats paying the price at the dealerships

R. Carrie, Wisconsin

I bought this winch for my grizzly 660 and couldn't be more pleased. Installation was easier than expected and the quality is top notch. The install instructions were good, the wiring and components were heavy duty. My last atv had a warn 2500lb winch, which i admit was well worn and probably abused, but the superwinch is much better. The warn overheated and stopped working often, under reasonable loads and short periods of use. I have had the superwinch for about 4-5 months and have used it quite a bit with no surprises. It pulls very hard and has dragged me and my buddies out of some nasty deep stuff. I have had the superwinch completely submerged in water and mud and used it in sub zero temps up to 90 degrees and it has worked without any issues whatsoever. I have heard some bad things about superwinch's lower end winches, but the terra line is supposed to be their higher end ones and i am planning on putting another one on my next wheeler. I highly recommend, you won't be disappointed.



Leave a Reply

You must be logged in to post a comment.


Top superwinch terra single line pull Review Content

Related Products

Product Image Gallery

Top-superwinch-1125230-handlebar-handheld-synthetic-177303coqaaa-Content