Superwinch 1145220 Terra 45 Atv & Utility Winch 4500lbs/2046kg Rating (Auto Accessory) 1777

Review for superwinch terra atv utility winch

Price was $244.99. I mounted this model on a j. D. Gator 855d. It just fit. I haven't used it yet so i don't know how it will perform. I bought this through online store ware house. So the price was right. The problem was they listed it as damaged box. When i was installing it i noticed that the label said terra 35. This drove me nuts, the box said terra 45. I decided to call the mfg. Instead of online store because they would have had me send it. Back, which i didn't want to do since i had every thing apart. To make a long story short it turned out that i had a 45 with the wrong label. I am still waiting for them to send me the correct label . I am very good with installing equipment like this and it still took all day to install. It came with a handlebar mount switch which is really not the best fit for the gator, so i bought a rocker switch to fit in the dash, . Which they should have included with the winch since they say its also for a side by side like the gator.

-P. Cunningham

Superwinch terra 45 atv & utility winch 4500lbs/2046kg designed to be compatible most four-bolt pattern atv winch mount kits available on the market today, the terra 45 is a fit for virtually any utility vehicle you ride. along a hefty -superwinch 1145220 terra 45 atv & utility winch 4500lbs/2046kg rating

  • Bonus: 55′ Of 1/4″ Steel Wire Rope With Ergonomic Cam Action Freespooling Clutch.
  • Bonus: All Steel Planetary Gear Twice As Wide As Those Used By The Competition And Utilizes Machined-in, Oil Pocket Bronze Bearings.

Lowest Price Superwinch 1145220 Terra 45 Atv & Utility Winch 4500lbs/2046kg Rating (Auto Accessory) 1145220

Buy Now

Foreword

This review is only for installation - haven't needed to use it yet. Everything was in the box as advertised, arrived promptly, online store prime (free shipping) rocks! installed on 2007 polaris sportsman 700 with the separately purchased superwinch 2202863 atv mounting kit. I used the fairlead mounting plate that came in the mounting kit, instead of the plate that came with the winch, only because it doesn't stick out in front as much. All the holes and dimensions lined up perfectly. Had to "reverse" a couple of sets of bolts due to tight clearances. Mechanically this thing is rock solid. The motor operates smooth and quiet, unlike the polaris plow motor i'm replacing. The old set-up had the polaris motor mounted on the back of the snow plow blade, and it always sounded like it was groaning and dying; in fact i had replaced it twice under warranty, and now polaris no longer makes that motor. Hence the superwinch. Key points i would share concerning installation:. 1. There isn't much extra space on my bike (under the seat) to mount the solenoid and tie-off the excess length 6 awg wires. 2. The circuit breaker design is just plain bad, consisting of a metal plate for the electrical connections. This is on the battery positive side of the circuit, so it can't touch any other metal part of the bike frame, etc. I wrapped the whole thing in electrical tape and it basically hangs by the wires - will have to keep an eye on this. 3. The polaris front "grill" assembly with headlights, etc. Would not re-install without a slight trimming (1/8" to 1/4") across the bottom side of the opening (under the mounting plate). Was able to do this with a utility knife. 4. I was able to reuse the polaris handlebar mounting arm to attach the new toggle switch (same screw hole dimension) - much cleaner look. 5. The remote toggle switch was easy to mount, to the left of the ignition key on the "dashboard" - there was a rubber blank there, and i merely filed the hole to be large enough to fit. . Now i'm looking forward to using this awesome winch! The Best superwinch terra atv utility winch as-of ( May 2019 ) | Superwh-Auto Accessory Review Bonus Superwinch 1145220 Terra 45 ATV & Utility Winch (4500lbs/2046kg Rating) High-efficiency, low amp draw, sealed 1. 6 hp permanent magnet motor featuring mechanical load holding and dynamic brake. 55' of 1/4" steel wire rope with ergonomic cam action freespooling clutch. All steel planetary gear twice as wide as those used by the competition and utilizes machined-in, oil pocket bronze bearings. Circuit breaker protected and weather sealed solenoid contact. 4-way roller fairlead, heavy duty latched hook with thimble and limited lifetime warranty .

Superwinch 1145220 Terra 45 Atv & Utility Winch 4500lbs/2046kg Rating Review (1145220)

Wow, what a winch, and what a price! for the money, you cannot beat this winch. Move over warn, superwinch is gunning for your market share and doing a great job of it. Quality product for a great price value that you can't beat. I love this winch and it's proven itself time and time again. It was easy to install, takes a beating and keeps on ticking. Very high quality product for my 2015 honda rancher fa5 (i used the kfi mount specifically for this model atv and it worked perfect, though snug/tight). -T. Anonymous

Superwinch 1145220 Utility 4500lbs 2046kg

  • Order: Automotive
  • Brand: Superwinch
  • EAN: 0022705003469
  • Product Dimensions:
    Height:4.80 inches
    Length:15.12 inches
    Weight:22.05 pounds
    Width:4.49 inches
  • Manufacturer: Superwinch
  • Warranty-Part: Parts
  • Model: 1145220
  • MPN: 1145220
  • Total: 1
  • Quantity: 1
  • Part/Serial Number: 1145220
  • Sub-Type: Automotive Parts And Accessories
  • Category: AUTO ACCESSORY
  • SKU: CAAZ*0202530000000
  • UPC: 022705003469
  • Warranty: Limited Lifetime Warranty

superwinch terra 45 atv & utility winch 4500lbs/2046kg Automotive Parts And Accessories, Designed to be compatible with most four-bolt pattern atv winch mount kits available on the market today, the terra 45 is a fit for virtually any utility vehicle you ride. along with a hefty 4, 500-lb line pull rating via 55-feet of 1/4" steel wire rope and a 1. 6 hp weather-sealed permanent magnet motor powered by an easy to establish permanent connection to your vehicle battery, the terra 45 features the power and reliability of a heavy-duty all-metal 3-stage planetary gear train. unlike planetary gears used by competitors, its rugged all steel gears are twice as wide as those used by the competition and utilize machined-in, oil pocket bronze bearings guaranteeing smooth, uncompromised movement for years to come, no matter the weather conditions. additional features include, a handlebar mounted switch, an ergonomic cam action freespooling clutch allowing users to quickly disengage the motor and manually draw out as much winch rope as needed, at any time, a four-way roller fairlead (mounting plate sold separately), a heavy duty latched hook with thimble and a limited lifetime warranty. Superwinch 1145220 Terra 45 Atv & Utility Winch 4500lbs/2046kg Rating (1145220-Superwh).

Superwinch 1145220 Utility 4500lbs 2046kg Automotive Parts And Accessories

superwinch terra atv utility winch Superwinch 1145220 Terra 45 ATV & Utility Winch (4500lbs/2046kg Rating) (Switch to Mobile/Desktop Version)

The superwinch terra 45 (1145220) provides the high-end power, versatility and durability that is a necessity for side by side utv users. A serious workhorse right out of the box, it possesses a superior all-steel 3-stage planetary gear train with machined-in, oil pocket bronze bearings, a 4, 500-lb pull rating, a 1. 6 horsepower low-amp draw engine, 55-feet of durable 1/4" steel wire rope, a 4-way roller fairlead, multiple operation switching options and more. . Caption font-family: verdana, helvetica neue, arial, serif; font-size: 10px; font-weight: bold; font-style: italic; ul. Indent list-style: inside disc; text-indent: -15px; table. Callout font-family: verdana; font-size: 11px; line-height: 1. 3em; td. Vgoverview height: 125px; background: 9dc4d8 url( repeat-x; border-left: 1px solid 999999; border-right: 1px solid 999999; padding-left: 20px; padding-right: 20px; padding-bottom: 10px; width: 250px; font-family: verdana; font-size: 12px; high performance atv winching power conceived with the toughest terrains and situations in mind, the superwinch 1145220 terra 45 utv winch delivers on the promise to haul you out of any tight spot you may end up in. Designed to be compatible with most four-bolt pattern atv winch mount kits available on the market today, the terra 45 is a fit for virtually any utility vehicle you ride. Along with a hefty 4, 500-lb line pull rating via 55-feet of 1/4" steel wire rope and a 1. 6 hp weather-sealed permanent magnet motor powered by an easy to establish permanent connection to your vehicle battery, the terra 45 features the power and reliability of a heavy-duty all-metal 3-stage planetary gear train. Unlike planetary gears used by competitors, its rugged all steel gears are twice as wide as those used by the competition and utilize machined-in, oil pocket bronze bearings guaranteeing smooth, uncompromised movement for years to come, no matter the weather conditions. Additional features include, a handlebar mounted switch, an ergonomic cam action freespooling clutch allowing users to quickly disengage the motor and manually draw out as much winch rope as needed, at any time, a four-way roller fairlead (mounting plate sold separately), a heavy duty latched hook with thimble and a limited lifetime warranty. High performance utv winching power. View larger. All steel planetary gears with oil pocket bronze bearings vs. Competitor's standard gears. View larger. Easy to engage and disengage ergonomic freespool control. View larger. Important safety features as with all superwinch products, safety is an important consideration of the terra winch series. With this in mind the terra 45 contains a wealth of valuable safety features standard. These include mechanical load holding and dynamic braking to minimize the possibility of wire rope slippage in the event of power failure or surge, and to provide quick stopping of the drum; a sealed solenoid and circuit breaker protection to ensure safe, reliable, electromagnetic power in all weather conditions; and a rubberized remote switch with a 10-foot extension cable, allowing for safe distances and positioning between the user and winch during off vehicle use. Standard features: powers load in and out 55' of 1/4" steel wire rope mechanical load holding and dynamic brake all steel planetary gear twice as wide as those used by the competition and utilizing machined-in, oil pocket bronze bearings ergonomic cam action freespooling clutch high efficiency, low amp draw, sealed 1. 6 hp permanent magnet motor circuit breaker protected weather sealed solenoid contact 4-way roller fairlead heavy duty latched hook with thimble limited lifetime warranty. What's in the box 1-terra 45 4, 500-lb winch, 1-standard 4-way roller fairlead, color-coated leads for connection to battery, 1-55' length of 1/4" (16. 76m x 6. 5mm) steel rope, 1-heavy duty latched hook with thimble, 1-rubber handheld remote with 10' rubber , 1-handlebar switch with 8' cable, 1-4" handsaver strap, mounting hardware, 1-sealed solenoid, 1-circuit breaker component, 1-set of plastic ties, 1-users manual. Specifications: rated line pull 4, 500 lb (2, 041 kg) bottom layer motor 1. 6 hp motor, 12v dc gearing 3-stage planetary gear ratio 191:1 braking mechanical and dynamic freespool clutch cam action wire rope 1/4" (6. 5mm) x 55' (16. 76m) dimensions 15. 1" l. X 4. 5" d. X 4. 8" h. (384mm l. X 114mm d. X 122mm h. ) drum diameter 2. 0" (50. 8mm) drum length 4. 9" (124. 5mm) weight 22 lb (9. 98kg) switching method handlebar mounted toggle switching mechanism heavy duty, sealed solenoid roller fairlead standard, 4-way color-coated wiring yes handheld remote yes, 10' wireless remote optional mounting bolt pattern 3. 0" x 4. 87" (76mm x 124mm) performance 12vdc (bottom layer on drum): line pull motor amps line speed lb  (kg) 12v fpm (m/m) 0 0 21 15. 0 (4. 6) 500 (227) 35 14. 0 (4. 3) 1, 000 (454) 52 13. 0 (4. 0) 1, 500 (680) 70 12. 0 3. 7 2, 000 (907) 87 11. 0 3. 4 2, 500 (1, 134) 102 10 3. 1           3, 000 (1, 161) 123 8. 8 2. 7 3, 500 (1, 588) 140 7. 5 2. 3 4, 000 (1, 814) 160 6. 5 2. 0 4, 500 (2, 041) 178 6. 5 1. 98 limited lifetime warranty superwinch, inc. Warrants to the original buyer that the mechanical components of all genuine superwinch winch models shall be free from defects in materials and workmanship from the date of purchase of new products for the lifetime of the winch and that the electrical components shall be free from defects in materials and workmanship for one year from the provable date of purchase, or otherwise specified time period. Any product that superwinch determines to be defective will be repaired or replaced superwinch's discretion without charge to buyer upon buyer's compliance with disclosed procedures. About superwinch, inc. Superwinch products are the winches trusted by professionals and weekenders alike for everything from racing to recovery, boating to off-roading. With their sleek, compact construction, superwinch products are designed for fast, easy installation - whether portable or permanent. Available in capacities ranging from 1, 000 to 30, 000 pounds, superwinch has the right winch for your application.

I bought the 3500 winch on online store because i burned up a lighter duty winch on my quad. Without a doubt, i definitely recommend at least a 3500 winch with a synthetic rope. Once you go synthetic you will never go back to a wire rope. Wires, or should i say cables, are heavy duty and they give you enough so hiding them can be challenging because they aren't too flexible. . I followed directions and realized that the winch does not spool in from the bottom as it should. After double and triple checking my wiring, i finally called superwinch. Somebody actually answered ( which is a miracle anymore) and informed me that the wiring instructions are incorrect ! i was told to reverse the wires on the winch and it will spool in from the bottom. He said that a bunch of winches went out that have the incorrect wiring instructions. He also informed me that the terra series winches are not made in the usa which surprised me. I reversed the wires and it spools in from the bottom as it should. Also, i said that the handle bar toggle switch is reversed. Usually when you hit the bottom of the rocker it should be " in " and top of the rocker should be "out" . He agreed and said that was "odd". This switch is reversed and you cannot flip it around on your handle bars. Winch operates quietly and seems fine. I only used it for plowing as of now and will give it a true test later. I ran wires along frame and wrapped the wires in electrical tape for protection. I then hooked up the plug for the remote and stored it in my bag i have mounted on my rear rack. This will allow me to have lots of mobility in the event i have to use the remote. . Winch seems well built. It is heavy and operates smoothly. Very disappointed that it isn't made in the usa. I hope the wiring instructions snafu doesn't reflect the quality of the winch. I guess time will tell. Superwinch's customer service was excellent. The price on online store was the best i found and if you are not worried about it not being made in the usa i would recommend buying it.

Superwinch 1145220 Terra 45 Atv & Utility Winch 4500lbs/2046kg Rating
Click to see NoticeSuperwinch 1145220 Terra 45 Atv & Utility Winch 4500lbs/2046kg Rating (Auto Accessory)"I bought this to replace a harbor freight winch. The only comparison is they're both winches. This superwinch is awesome! everything about it screams awesome! the winch itself, the cable, the wiring, the handle bar switch - all awesome! there was way more than enough wiring to reach the battery. The wiring is very flexible. The included schematic in the directions is easy to understand. The only issue i had was getting this to fit in the poorly designed rancher front end. It's like honda made it difficult on purpose requiring some drilling of the push bar mounts where it connects right behind and above the winch. I am totally happy with this winch. Thank you superwinch."


Superwinch 2302285 ATV Bow-Shackles pair

Superwinch bow shackle is designed to work with the winch and can also be used as recovery or pulling point. It facilitates wire rope and strap attachment safe and easy. This product includes 2 bow shackles.

Superwinch 2302285 ATV Bow-Shackles pairSuperwinch-2302285-ATV-Bow-Shackles-pair

SUPERWINCH 2302285 ATV BOW-SHACKLES PAIR Features
Brand :    superwh
Weight :    1.30 pounds
  • Make wire rope and strap attachment safe and easy
  • Work as a recovery or pulling point for atvs
  • 2 atv bow shackles
Price :    $19.99
Model :    2302285
Quantity :    1
Order click here :    normally ships in 1-2 business days
Automotive Parts And Accessories :    Best Auto Accessory (superwh product review) for Superwinch 2302285 ATV Bow-Shackles pair available as-of ( May 2019 )

Superwinch 2227A Pulley Block 8,000 lb capacity, use winches having maximum single line capacity of 4,000 lb

This Extra Pulley Doubles The Lifting Capacity Of A Winch Is Easy To Cable Mount; Remove Lock Clip Pulley Pin And Reassemble Over Cable. Again Online Store You Made It Happen. Thank You

Superwinch pulley block is designed to capacity of 8, 000 lbs. This pulley block facilitates to change the pulling direction without damaging the wire rope. It is custom designed to fit all winches up to 4, 000 lbs. This pulley block helps lower the amp draw and motor heat buildup of a winch.

Superwinch 2227A Pulley Block 8,000 lb capacity, use winches having maximum single line capacity of 4,000 lbSuperwinch-2227A-capacity-winches-maximum

Superwinch 2227a capacity winches maximum (Superwh) FAQ.

Works The Way It Should. Used It A Couple Of Time To Reduce The Strain On The Winch. I Always Keep It In My Winch Bag Ready To Go. -Notice from S. Peggy, Northwest Territries

Click to Show superwinch 2227a capacity winches maximum (superwh) Details

Haven't Pushed This To The Max Limit(i Don't Do That As A General Rule With Blocks And Cables) But It Has Performed Well When I Needed It. Probably Had 4k On It Far Short Of 8k Rating.

Superwinch-2227a-capacity-winches-maximum-(superwh) set picture

- B. CeciliaThis Pulley Block Is Excellent. The Winch Feature Is Great. Very Good Winch System. The Capacity Is Just Right. Thank You.

I Am Using This With My Atv Winch And Swisher Dump Bucket. It Has Worked Flawlessly For Almost Two Years. I Use It When Plowing Snow And Moving Dirt/sand/stone Around The Yard. Great Item.

I. Guest, Torbay

SUPERWINCH 2227A PULLEY BLOCK 8,000 LB CAPACITY, USE WINCHES HAVING MAXIMUM SINGLE LINE CAPACITY OF 4,000 LB Advantages
Brand :    superwh
Size :    4
Weight :    1.98 pounds
Model :    2227A
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (superwh product review) for Superwinch 2227A Pulley Block 8,000 lb capacity, use winches having maximum single line capacity of 4,000 lb available as-of ( May 2019 )
Price :    $24.77 (was $26.90)
  • Simple to use
  • Can help lower the amp draw and motor heat buildup of a winch.
  • Made from durable material
  • Can double the pulling power of winches rated up to 4, 000lbs
  • Facilitates the ability to change the pulling direction without damaging the wire rope.

Superwinch 2302284 Tree-saver Strap, 1 x 8'

Quality Of Construction And Materials Is Excellent. I've Used It For Countless Extractions And Even Skidding Some Logs.

Superwinch tree-saver strap is designed to ease the winching activity. This strap is tough, versatile and very convenient for off-roader needs. This recovery strap is rated at a 8, 000 lb capacity. It measures 1 inches wide and 8 feet long.

Superwinch 2302284 Tree-saver Strap, 1 x 8'Superwinch-2302284-Tree-saver-Strap

Superwinch 2302284 Tree-saver Strap, 1" X 8' (Superwh) FAQ.

Strap Seems Ok But I Was Disappointed After Opening The Package And It Stated That The Breaking Limit Was Less Than The Adveritsed 8000lb. If It's Less Than 8k Then They Should Say So Not Advertise More. -Notice from O. Medina, Kensington and Chelsea

Click to Show superwinch 2302284 tree-saver strap, 1" x 8' (superwh) Details

This Is A Must Have Item Stashed Away Somewhere On Your Farm Tractor For Immediate Quick Grab Kind Of Work. A Hook On A Bucket Or A Backhoe And T-posts Can Be Pulled With No Problem Drag Large Down Trees Use It Help Keep A Load In/on The Bucket You Name It. Bought Two Though I Might Suggest Getting The 10' Length Rather Than The 8. Bought Them To Replace One That I Had To Slice Off A Log (don't Ask) And Guessed At The Length. One Of Those Longer Is Better After Thoughts.

Superwinch-2302284-tree-saver-strap,-1"-x-8'-(superwh) set picture

- X. AliceThis Was A Gift For My Husband. He Likes To Go Jeepin' And Sometimes Needs To Winch Someone Out Of A Tricky Spot. I Was So Pleased To Find The Exact Item On Online Store!

SUPERWINCH 2302284 TREE-SAVER STRAP, 1 X 8' Featured
Price :    $28.71
  • Has an 8, 000-lb capacity
  • Eases atv winching activity
  • Measures 1" x 8'
  • Simple to use
  • Enviroment friendly
Brand :    superwh
Weight :    0.60 pounds
Model :    2302284
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (superwh product review) for Superwinch 2302284 Tree-saver Strap, 1 x 8' available as-of ( May 2019 )

Superwinch 1509 Tree-saver strap: 2 x 6'

Superwinch tree-saver strap is designed to ease the winching activity. This recovery strap is made from nylon and is highly durable. It is suitable for winch use. This recovery strap features nylon slings. It is used efficiently for winching and towing. This recovery strap is rated at a 15, 600 lb capacity. It measures 2 inches wide and 6 feet long.

Superwinch 1509 Tree-saver strap: 2 x 6'Superwinch-1509-Tree-saver-strap

SUPERWINCH 1509 TREE-SAVER STRAP: 2 X 6' Summary
Brand :    superwh
Size :    2" x 6' - 15,600 lb
Weight :    0.95 pounds
  • Eases winching activity
  • Measures 2" x 6'
  • Has a 15, 600-lb maximum vehicle weight capacity
  • Enviroment friendly
  • Simple to use
Price :    $29.32
Model :    1509
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (superwh product review) for Superwinch 1509 Tree-saver strap: 2 x 6' available as-of ( May 2019 )

Superwinch 2517 Recovery strap 2 x 20'

Superwinch recovery strap is designed to ease the winching activity. This recovery strap is made from nylon and is highly durable. It is suitable for winch use. This recovery strap features nylon slings. It is used efficiently for winching. This recovery strap is rated at a 15, 600 lb capacity. It measures 2 inches wide and 20 feet long.

Superwinch 2517 Recovery strap 2 x 20'Superwinch-2517-Recovery-strap-20

SUPERWINCH 2517 RECOVERY STRAP 2 X 20' Feature
Price :    $47.89
  • Simple to use
  • Measures 2" x 20'
  • Has a 15, 600-lb maximum vehicle weight capacity
  • Enviroment friendly
  • Eases winching activity
Brand :    superwh
Size :    2" x 20' - 15,600 lb
Weight :    1.80 pounds
Model :    2517
Quantity :    1
Order click here :    normally ships in 1 to 2 months
Automotive Parts And Accessories :    Best Auto Accessory (superwh product review) for Superwinch 2517 Recovery strap 2 x 20' available as-of ( May 2019 )

KFI Products ATV-SCHS Winch Cable Hook Stopper

This Was The Only Hook Stopper I Could Find That Is Compatible With A Winch Cable That Is Crimped To The Hook Since It Is A Two Piece Design. All Of The Other Systems Require The Hook To Be Removed So The Cable Loop Can Be Passed Through The Stopper. That Is Only Possible If Your Hook Has A Pin Holding It To The Loop But My Cable Was Crimped Through A Fixed Loop In The Base Of My Hook So It Could Not Be Removed. I Also Like That The Bolts Add Some Weight To It So If Used Properly By Placing It In The 1/2-3/4 The Way Out On The Cable During Winching It Can Help Reduce The Risk From Cable Lashing In The Event Of A Snapped Cable. That Makes This A Good System For Any Type Of Hook Attaching System.

This split cable hook stopper is for the atv and utv winch. It weighs 4 oz. It is 2 5/8 inches wide and 1 3/4 inches thick. This kfi split cable hook stopper will fit between the two outside rollers on an atv or utv winch fairlead. It also works great with the synthetic rope and or the slot fairlead. Reasons to purchase a split cable hook stopper : eliminates wear and tear on your rollers from the hook. Eliminates hook clatter from going down the trail. Protects the winch motor and gears from pulling the cable in to far and bottoming out on the rollers. Keeps tension on the hook to eliminate the cable becoming loose. Looks great. Once you have one, everyone else that you ride, with will want one. Installation: note: wear leather gloves. 1) freespool winch and pull out approx. 2 feet of cable. 2) pull hairpin and release clevis pin from winch hook. 3) remove the four bolts fastening the two halves of the split cable hook stopper together. Place the cable or rope between the two halves. Insert the four bolts and tighten. 4) re-attach hook to cable end. 5) to stow hook, engage clutch and retract cable onto winch spool until hook is snug against the hook stopper and fairlead. 6) position hook stopper at approx. 3/4 of the total line distance towards hook while using you winch.

KFI Products ATV-SCHS Winch Cable Hook StopperKFI-Products-ATV-SCHS-Winch-Stopper

Kfi Products Atv-schs Winch Cable Hook Stopper (Auto Accessory) FAQ.

Never Used One Of These Before But So Far I Love It. Keeps Me From Having To Find A Place To Put The Hook So It's Not Flopping Around. -Notice from Q. Julia, Connecticut

Click to Show kfi products atv-schs winch cable hook stopper (auto accessory) Details

Excellent Product For The Price. I Bought This To Put On The "tuff Stuff Performance 3/4" Synthetic Rope". I Knew It Would Be Too Small But The Price Was So Reasonable I Thought I'd Try It. I Was Able To Easily Enlarge The Opening With A Drill Bit And A Razor Blade And It Fits Perfect Nice And Tight. Does An Excellent Job Of Not Ruining My Hawse Aluminum Fairlead By Sucking The Hook All The Way In. Would Definitely Buy Again.

Kfi-products-atv-schs-winch-cable-hook-stopper-(auto-accessory) set picture

- G. TraceyThe Atv Winch Cable Hook Stopper Arrived On Time Worked Exactly As Advertised And Fits The Fairlead On My Particular Winch As If It Were Made For It. Since The Stopper Is Two Halves Bolted Together You Can Easily And Quickly Attach It To The Winch Cable Without Removing And Replacing The Cable Hook Which In Itself Can Be A Project. This Coming Winter's Snow Plowing Will Give Me An Idea Of How Well The Stopper Holds Up.

I Like This Because It's Kind Of A Pain To Put A Nylon Winch Rope In The One Piece Hook Stoppers And With These 2 Piece Stoppers You Just Bolt It Around The Nylon. I Put These On All My Atvs They Hold Up Great And Keep The Hooks From Flapping Aroun

C. Glenda, Virginia

KFI PRODUCTS ATV-SCHS WINCH CABLE HOOK STOPPER Benefits
Brand :    kfi products
Weight :    0.20 pounds
Model :    ATV-SCHS
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (kfi products product review) for KFI Products ATV-SCHS Winch Cable Hook Stopper available as-of ( May 2019 )
Price :    $9.86 (was $12.39)
  • Once you have one, everyone else that you ride, with will want one
  • Eliminates wear and tear on your rollers from the hook
  • Eliminates hook clatter from going down the trail
  • Protects the winch motor and gears from pulling the cable in to far and bottoming out on the rollers
  • Keeps tension on the hook to eliminate the cable becoming loose

KFI Products 101220 Winch Mount

100% made in usa constructed of 3/16in. Steel unlike all other mount competitors our mounts are metal bead blasted before they are powder coated for the best possible finish prep. Powder coated black for supreme durability all mounting hardware included very easy to install complete installation instructions included satisfaction guaranteed mount designed to work with the following winches: kfi:st17 / a2500 / a3000 / u4500 / se25 / se35 / se45 warn: a2000 / a2500 / u2500 / 1. 5ci / 2. 5ci / 2. 5ce / 3. 0ci / 3. 0ce / 3. 0s warn: rt15 / rt25 / rt30 / xt15 / xt25 / xt30 warn: vantage 2000-3000lbs / provantage 2500-3500lbs ramsey : atv2500 / atv3000 superwinch : terra25 / terra35 / lt2500 / lt3000 mile marker : pe2. 5 / pe 3. 5 / vmx2. 5 / pe3500 cycle country : work power2500 / powermax 2500 and 3500 badland : 3000lb 68145 this item fits the following applications: 2015-2015 polaris rzr xp 4 1000 eps, fitment notes: requires the purchase of utv-wek (wire extension kit) due to location of battery on ranger. 2015-2015 polaris rzr xp 1000 eps 2015-2015 polaris rzr 900

KFI Products 101220 Winch MountKFI-Products-101220-Winch-Mount

KFI PRODUCTS 101220 WINCH MOUNT Reviews
Brand :    kfi products
Weight :    8.00 pounds
Model :    101220
Quantity :    1
Order click here :    normally ships in 1-2 business days
Automotive Parts And Accessories :    Best Auto Accessory (kfi products product review) for KFI Products 101220 Winch Mount available as-of ( May 2019 )

2009-2013 Polaris Ranger KFI Winch Mount Wide

Winch Plate Works Awesome Easy Install And Everything Fit Perfect On My 2012 Polaris Ranger 800 Efi Very Handy To Have A Winch

100% made in usa constructed of 3/16in. Steel unlike all other mount competitors our mounts are metal bead blasted before they are powder coated for the best possible finish prep. Powder coated black for supreme durability all mounting hardware included very easy to install complete installation instructions included satisfaction guaranteed to be use with kfi winch mode u4000w and warn winch model rt/xt40. This item fits the following applications: 2012-2012 polaris ranger 800 xp le 2012-2012 polaris ranger 800 xp eps le 2011-2014 polaris ranger diesel 2011-2012 polaris ranger 800 hd eps 2010-2013 polaris ranger 800 crew, fitment notes: all ranger crew and rzr 4 seat need to purchase wire extension kit 2010-2013 polaris ranger 6x6 800, fitment notes: all ranger crew and rzr 4 seat need to purchase wire extension kit 2010-2012 polaris ranger 800 xp eps 2010-2012 polaris ranger 800 xp 2010-2012 polaris ranger 6x6 800 2010-2010 polaris ranger 800 hd 2010-2010 polaris ranger 4x4 400 2009-2010 polaris ranger 4x4 500 efi 2009-2009 polaris ranger xp 700

2009-2013 Polaris Ranger KFI Winch Mount Wide2009-2013-Polaris-Ranger-KFI-Winch

2009-2013 Polaris Ranger Kfi Winch Mount (wide) (Kfi Products) FAQ.

My Husband Bought A New Six Wheel Ranger And Needed To Accesorize It With A Front Winch And One On Back To Lift Items Up Into The Dump Bed. He Said This Mounting Bracket Worked Great And Didn't Require Any Modifications. -Notice from D. Harrison, Wisconsin

Click to Show 2009-2013 polaris ranger kfi winch mount (wide) (kfi products) Details

Another Great Winch Mount From Kfi. This Bolted Right Up With No Issues And Looks Great.

2009-2013-polaris-ranger-kfi-winch-mount-(wide)-(kfi-products) set picture

- N. ErinPerfect Fit On My 2011 800 Xp. Heavy Built Looks Good.

Perfect Fit. Great Quality. Worked Perfectly On My 2013 Ranger Crew 800 With Superwinch 1145230 Terra 45 4500 Winch.

W. Anderson, Pennsylvania

2009-2013 POLARIS RANGER KFI WINCH MOUNT WIDE Overview
Brand :    kfi products
Weight :    6.50 pounds
Model :    5400.1881
Quantity :    1
Order click here :    normally ships in 1-2 business days
  • Unlike all other mount competitors our mounts are metal bead blasted before they are powder coated for the best possible finish prep.
  • Constructed of 3/16in. steel
  • All mounting hardware included
  • 100% made in usa
  • Powder coated black for supreme durability
Price :    $43.16
Automotive Parts And Accessories :    Best Auto Accessory (kfi products product review) for 2009-2013 Polaris Ranger KFI Winch Mount Wide available as-of ( May 2019 )

Superwinch 2302297 Neoprene UTV/ATV Winch Cover

This Provides Nice Protection For My Winch. This Is My Second One And I Will Probably Buy More. Unfortunately The Elements (probably Sun) Are Brutal On It And Eat Away At It. I Must Have Not Tightened The Drawstring Enough On My First One It Went Up And Over The Truck (whoops). But I Do Like It.

Winch-hugging neoprene covers are now made even better with superwinch's exclusive draw string for simple security. Easy and quick on and off make this a cover you'll enjoy using with each trip. So cover up that great looking winch with a great cover made of dive-suit quality neoprene with uv inhibitors. This cover fits the terra 25, terra 35, terra 45, lt2000, lt2500, lt3000, lt4000, x1, x2, x3, ac1000 and ac1500 winches.

Superwinch 2302297 Neoprene UTV/ATV Winch CoverSuperwinch-2302297-Neoprene-Winch-Cover

Superwinch 2302297 Neoprene Utv/atv Winch Cover (Superwh) FAQ.

Good Value For The Money. Seems Of Decent Quality. Will See How It Holds Up To The Sun. Used It On My Comeup 9. 5 Rsi Winch And Turned The Logo Around. A Little Tough To Get The Draw Cord Snug Around The Base Of The Winch But That Is Mostly Due To The Arb Bumper. -Notice from A. Zelda, Tennessee

Click to Show superwinch 2302297 neoprene utv/atv winch cover (superwh) Details

My Winch Is Bolted To My Trailer So It Sits Out In The Weather 24/7. I Wanted A Simple Cover That Wouldn't Be Too Expensive And This Fit The Bill. It Also Fits Perfectly And If It Blows Off Or Gets Worn It Was Inexpensive Enough That I Won't Cry. . . I'll Buy Another One!

Superwinch-2302297-neoprene-utv/atv-winch-cover-(superwh) set picture

- S. SherryI Bought This Cover For My Superwinch 09034sr Epi9. 0s Series Winch And It Fits And Looks Great. As Others Mentioned The Neoprene Material Is Pretty Nice And The Drawstring Underneath Gives It A Snug Fit. This Was My *second* Cover For The Winch; I Went With The Canvas/cloth Superwinch Cover Originally And After Only Two Years (with Much Of That Time Under My Jeep Cover Even) It Faded Badly And The Fabric Weakened And Ripped. Neoprene Will Fade Too Eventually But For The Price (cheaper Than My First Cover) This Is A Wise Investment For Any Superwinch Owner I'd Say.

Was Worried In The Beginning That This Would Fly Off. Item Has A Rubber Coating On The Inside To Grip Whatever It Touches. Have An Ep9. 0 That Is Fits Ok. The Left Hand Side Is Somewhat Empty Which Causes The Cover To Collapse Some. Other Than That It's A Great Product.

E. Sarah, Illinois

SUPERWINCH 2302297 NEOPRENE UTV/ATV WINCH COVER Advantage
Price :    $17.59 (was $21.99)
  • This cover fits the terra 25, terra 35, terra 45, lt2000, lt2500, lt3000, lt4000, x1, x2, x3, ac1000 and ac1500 winches;
  • Easily installed or removed from the winch;
  • Cover made of dive-suit quality neoprene with uv inhibitors to protect your winch;
  • Superwinch's exclusive draw string insures cover stays on your winch;
  • Neoprene covers fit securely on your winch;
Brand :    superwh
Weight :    0.2 pounds
Model :    2302297
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (superwh product review) for Superwinch 2302297 Neoprene UTV/ATV Winch Cover available as-of ( May 2019 )

KFI Products ATV-CHS Winch Cable Hook Stopper

This Fit Perfect On My Falcon 3500 Winch. Took Off The Hook And With A Little Leverage From Some Pliers It Slid Right On. Fits Perfectly Between The Sides Of My Fairlead. Couldn't Be Happier With It. Great Deal At $12 And Some Change. I Put A Picture Up Of The Great Fit

Winch cable stopper for kfi winch kits

KFI Products ATV-CHS Winch Cable Hook StopperKFI-Products-ATV-CHS-Winch-Stopper

Kfi Products Atv-chs Winch Cable Hook Stopper (Auto Accessory) FAQ.

I Bought This For A Superwinch Lt3000 After Pulling The Ferrule For The Hook Loop Through The Fairlead Twice When Plowing. At First I Was Expecting This To Be A Heavy Hard Plastic Cup But I Was Surprised When It Turned Out To Be A Dense Stiff Solid Rubber Cylinder. It Does Exactly What It Is Intended And Prevents The Winch Hook From Pulling Through The Fairlead And Badly Damaging The Rollers In The Process And Keeping The Wire Rope And Hook Pulled Up And Taught And Neat-looking. It's Easy To Install And I Can't See Anyway For It To Fail Though I'm Sure If You Wanted To You Could Pull The Winch Hook Through The Stopper But This Would Have To Be Done On Purpose As You Would Hear The Winch Motor Bog Down For A While Before It Could Do This. My Only Complaint Is That It Would Seem To Me That It Should Be A Little Less Than $12 For Just A Block Of Rubber But It Is Worth The Price Nonetheless. -Notice from T. Garner, Minnesota

Click to Show kfi products atv-chs winch cable hook stopper (auto accessory) Details

You Will Need To Unwind Your Winch And Remove Cable To Install Simple As That There Is No Way In Motherly Homeland To Simply Slide It Over The Eyelet (which Is Called For In The Instructions Which Are Very Limited). Once Installed By Unwinding Your Winch Cable All The Way And Removing The Cable From The Winch And Inserting The Cable Through The Hook Stopper And Re-installing Your Cable To The Winch Product Is Installed So Much Quicker Than Trying To Slide It Over The Eyelet Which I Found To Be Close To Impossible Not Saying It's Not Possible But On A 3500lb Winch I Grew Tiresome Trying Someone Else Might Be Able To Do It But It's Much Simpler To Uninstall Your Cable And Insert Through Hook Stopper. Product Does It's Job.

Kfi-products-atv-chs-winch-cable-hook-stopper-(auto-accessory) set picture

- V. KellyMy Son Wore Out The Cheaply Made Snubber That Came With His Winch And After A Little Research Kfi Seemed To Be The Answer. Glad We Ordered This Snubber Probably Wear Out The Winch Before We Replace This Snubber Again. So If In Doubt I Highly Recommend You Buy This Product From Kfi !!

I Read All The Horror Stories About Installation Of Other Cable Stopper Products And I Decided To Purchase The Kfi Winch Cable Stopper For My Warn Winch. It Took Me All Of 1 Minute To Install And It Is Rock Solid. No Problem At All Getting The Cable Through The Stopper.

U. Cathy, North Carolina

KFI PRODUCTS ATV-CHS WINCH CABLE HOOK STOPPER Spotlight
Brand :    kfi products
Size :    N/A
Weight :    0.38 pounds
Model :    ATV-CHS
Quantity :    1
Order click here :    normally ships in 1 to 3 months
Automotive Parts And Accessories :    Best Auto Accessory (kfi products product review) for KFI Products ATV-CHS Winch Cable Hook Stopper available as-of ( May 2019 )
Price :    $12.90
  • Unlike all other mount competitors our mounts are metal bead blasted before they are powder coated for the best possible finish preparation
  • Constructed of 3/16 inch steel
  • Powder coated black for supreme durability; easy to install

KFI Products 101150 Winch Mount Honda Pioneer

Kfi Was Perhaps The First To Offer A Winch Mount For The 2014 Honda Pioneer At Reasonable Price. This Mount Fit My Pioneer Exactly And Is Made Of Heavy Steel. Installation Was A One Man Job And Took About Two Hours And Went Smoothly. I Would Recommend This To Anyone Installing A Winch On This 2014 Honda Side By Side. Great Usa Made Product.

100% made in usa constructed of 3/16in. Steel unlike all other mount competitors our mounts are metal bead blasted before they are powder coated for the best possible finish prep. Powder coated black for supreme durability all mounting hardware included very easy to install complete installation instructions included satisfaction guaranteed this item fits the following applications: 2014-2014 honda sxs700m4 pioneer 700-4 2014-2014 honda sxs700m2 pioneer 700

KFI Products 101150 Winch Mount Honda PioneerKFI-Products-101150-Winch-Pioneer

Kfi Products 101150 Winch Mount Honda Pioneer (Auto Accessory) FAQ.

The Instructions Are A Little Confusing But I Found That If I Just Crumpled Them Up Into A Ball And Threw Them Away And Then Looked At Everything For A Minute It Was Easy To See How It Is Supposed To Go. You Must Remove The Front Bumper To Install This But It Was Pretty Easy. I Mounted A Superwinch 3000atv Winch And Roller Fairlead To This Without Any Problems. Just Beware That If You Have A Cheapo 2000lb Winch The Roller Fairlead Probably Wont Bolt Up To This Because The Mounting Points Are Too Narrow. -Notice from J. Powell, Ealing

Click to Show kfi products 101150 winch mount honda pioneer (auto accessory) Details

Perfect Fit For My Honda Pioneer. The Instructions Were A Little Confusing For Me But I Got Them Figured Out. Solid Product!

Kfi-products-101150-winch-mount-honda-pioneer-(auto-accessory) set picture

- X. PeggyI Have A 2016 Honda Pioneer 700-4 And Was Able To Install This In Less Than 30 Minutes. The Quality And Workmanship Is Top Notch. I Love The Fact That The Finish Matches Perfectly With The Factory Finish. The Hardest Part Was Having To Remove The Front Bumper. Once The Bumper Was Off This Adaptor Slipped In Place Just Like It Should. I Used The Supplied Nuts And Bolts And Once Done It Looks As If Honda Had Installed It From The Get Go. It Has Several Different Winch Mounting Holes Which Lined Up With My Superwinch Perfectly. I Can T Wait To Put This To The Full Test.

Very Well Made Easy Install The Only Issue I See Is It Mounts To The Front Brush Guard Mounts Which Are Small Brackets On The Frame Not Sure If These Brackets Will Hold All The Weight Of Pulling On Them. Kfi Should Really Check This Out Might Need An Extra Reinforcement Bracket.

A. Nicole, Virginia

KFI PRODUCTS 101150 WINCH MOUNT HONDA PIONEER Advantages
Brand :    kfi products
Weight :    10.50 pounds
  • Complete installation instructions included all mounting hardware included
  • Satisfaction guaranteed
  • Powder coated black for supreme durability, very easy to install
  • Constructed of 3/16 inches steel
  • 100 percentage made in usa
Price :    $49.45 (was $52.47)
Model :    101150
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (kfi products product review) for KFI Products 101150 Winch Mount Honda Pioneer available as-of ( May 2019 )

VIPER 2012-2016 Kawasaki Teryx 4 750/800 2014-2016 Teryx 2 800 Winch Mount

Fit My 2016 Kawasaki Teryx 4 Le 800 And The Winch Like It Said

Viper winch mount plates are laser cut and shaped to exacting specifications. By utilizing state of the art computerized equipment, we provide a precise and custom fit for your utv. Winch mount plates are also designed to utilize the strength of your utv's frame to optimize winching efficiency. Specs: black, industrial powder coat finish includes mounting hardware and detailed instructions will work with terra 45 winches fitment 2012-2013 teryx 4 (4-seater) 750 2014-2016 teryx 4 (4-seater) 800 2014-2016 teryx 2 (2-seater) 800 please note: we recommend a viper max 3500-5000lb or any viper elite winch for use on teryx 2 and 4s. Smaller winches may require clocking of the motor due to the terminals interfering with the bumper. Works with: viper: mx2500/mx3000/mx3500/mx4000/mx4500/mx5000 viper: ex3000/ex3500/ex4000/ex4500/ex5000 viper: mx4000se/ mx5000se viper: ex4000se/ex4500se/ex5000se other winches with mounting patterns of: standard 4-hole : 3. 00" x 4. 875" bolt pattern wide spool 4-hole : 3. 00" x 6. 660" bolt pattern

VIPER 2012-2016 Kawasaki Teryx 4 750/800 2014-2016 Teryx 2 800 Winch MountVIPER-2012-2016-Kawasaki-Teryx-2014-2016

Viper 2012-2016 Kawasaki Teryx 4 750/800 2014-2016 Teryx 2 800 Winch Mount (Motoalliance) FAQ.

It Is Listed As Having Fitment With The 2016 Teryx 4 800 And A Tera 45 Winch. This Is The Exact Setup I Have So I Purchased This Mounting Plate. While Everything Did Bolt Up The Electrical Connection On The Winch Was Contacting The Frame Of The Teryx. Obviously This Is An Issue. I Ended Up Having To Add Approx 3/16" Spacing Under The Mounting Plate To Get The Proper Clearance. -Notice from I. Kristen, Louisiana

Click to Show viper 2012-2016 kawasaki teryx 4 750/800 2014-2016 teryx 2 800 winch mount (motoalliance) Details

Great Winch Mount For My 2016 Teryx 4 Le. I Paired This With A Motoalliance Viper Max 5000 Lb Winch (synthetic Rope). Everything Fit Perfectly. I Didn't Have To Modify Anything On The Winch Or My Teryx. It Took Me A Few Hours To Install. I Could Probably Do The Next One (father In Laws) A Little Faster. The Instructions With The Plate/winch Could Be A Little More Detailed But I Won't Dock Them For That.

Viper-2012-2016-kawasaki-teryx-4-750/800-2014-2016-teryx-2-800-winch-mount-(motoalliance) set picture

- T. CandyThe Only Problem I Had Was The Bracket Placed The Winch So It Rubbed The Bumper I Installed It On A 2014 Teryx 4 With A Superwinch 4500 So Not Sure Why It Did Not Fit Correctly. Not Difficult To Drill The Holes Out So It Could Move The Winch Over A 1/4" So It Would Not Rub.

Mount Fit 2016 Teryx 4 Perfectly. Bolt Holes Exact Match . The Angle Of This Mount Allowed For Good Clearance For The 4000lb Super Winch . Also The Stock Skid Plate Fits Back Overtop Of Mount Plate Nicely .

D. Susan, Kingston upon Thames

VIPER 2012-2016 KAWASAKI TERYX 4 750/800 2014-2016 TERYX 2 800 WINCH MOUNT Featured
Brand :    motoalliance
Weight :    6.00 pounds
Model :    MA11937-
Quantity :    1
Order click here :    normally ships in 1-2 business days
  • Will work with terra 45 winches
  • Fits: 2012-2013 teryx 4 (4 seater) 750; 2014-2016 teryx 4 (4-seater) 800; 2014-2016 teryx 2 (2-seater) 800
  • Black industrial powder coat finish
  • For use with the 4-bolt standard (3" x 4. 875") & wide (3" x 6. 67") mounting patterns
Price :    $49.99 (was $54.99)
Automotive Parts And Accessories :    Best Auto Accessory (motoalliance product review) for VIPER 2012-2016 Kawasaki Teryx 4 750/800 2014-2016 Teryx 2 800 Winch Mount available as-of ( May 2019 )

KFI Products 101285 Winch Mount For Honda Pioneer 1000

Brand new "kfi" winch mount for the following honda utv's: 2016 honda pioneer 1000 and 1000-5 designed to work with the following winches: kfi: st17/s2000/a2500/a3000/u4500/u4500w/se25/se35/se45/se45w warn: a2000/a2500/u2500/1. 5ci/2. 5ci/2. 5ce/3. 0ci/3. 0ce/3. 0s warn: rt15/rt25/rt30/xt15/xt25/xt30 warn: rt40/xt40 warn: vantage 2000-4000lb warn: provantage 2500-4500lbs ramsey : atv2500/atv3000 superwinch : terra25/terra35/terra 45/lt2000/lt2500/lt3000/lt4000atv mile marker : pe2. 5/pe 3. 5/vmx2. 5/pe2000/pe3000/pe2500/pe3500 cycle country : work power 1500 and 2500/powermax 2500 and 3500 badland : 2000lb 68146/2500lb 61297/2500lb 61840/2500lb 61258 - requires the correct fairlead with a 4. 875" bolt pattern (available if needed atv-rf) - listed models come with incorrect atv roller fairleads badland : 3000lb 68145/3500lb 61257/3500lb 61383/5000lb 68144/5000lb 61384 champion : c10013/c10014/c10018/10020/10024/12053/12503/12551/13004/13050/13502/13501(requires rollers) champion : 14501/14551/14552/14008/40252 (4500lbs) champion : 10028/10032/12001/12002/13001/20049/20051/20249/30045/30145/12008 - requires the correct fairlead with a 4. 875" bolt pattern (available if needed atv-rf) - listed models come with incorrect atv roller fairleads champion: 14001 and 14061/14051/14560.

KFI Products 101285 Winch Mount For Honda Pioneer 1000KFI-Products-101285-Winch-Pioneer

KFI PRODUCTS 101285 WINCH MOUNT FOR HONDA PIONEER 1000 Featured
Brand :    kfi products
Weight :    8.00 pounds
Model :    101285
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (kfi products product review) for KFI Products 101285 Winch Mount For Honda Pioneer 1000 available as-of ( May 2019 )
Price :    $49.46 (was $50.23)
  • Very easy to install complete installation instructions included
  • 100 percent made in usa constructed of 3/16" steel
  • Roller fairlead and winch not included
  • All mounting hardware included satisfaction guarantee
  • Unlike all other mount competitors our mounts are metal bead blasted before they are powder coated for the best possible finish prep. powder coated black for supreme durability

KFI Products ATV-SB Snatch Block

Product Is Exactly As Described. Good Quality Works Great Not Too Big For Storing In Utv. Highly Recommend To Anyone With An Atv Or Utv.

Specifications: 8, 000 pounds rating (turns the 8, 000 pounds into 16, 000 pounds). Powder coated1-1/2 inch diameter holes for hooking. Over-all size: 3. 00 inch x 5. 75 inch x 1. 375 inch.

KFI Products ATV-SB Snatch BlockKFI-Products-ATV-SB-Snatch-Block

Kfi Products Atv-sb Snatch Block (Auto Accessory) FAQ.

Price Was Good But The Product Was Better. Great Finish. Mechanism Works Well. Paint Finish Is Good. Easy To Operate. Not Too Big And Bulky But Sturdy Enough. Use For My Polaris Sxs Quad. -Notice from I. Florence, Somerset

Click to Show kfi products atv-sb snatch block (auto accessory) Details

I Use This Not For Atv Winching But To Cut Firewood. A Good Snatch Block Is An Essential Tool For Skidding Logs Around Stumps Getting Widow-makers Down Helping With Stuck Saws And Felling Trees In A Direction They Don't Want To Naturally Fall. For All Of These I Hook Rope To A Farm Tractor And Either Use The Tractor Or Lift The Bucket To Pull On The Tree. If You Don't Have Something To Change The Direction Of Your Pull You Pull The Tree On Top Of Yourself. The Only Block I Found Locally Was A 3. 5 Ton Monster At The Tractor Store That Sold For $40 Plus Tax. This Is The Right Size For What I Do In Every Way. It's The "goldie Locks" Of Snatch Blocks. There Is No Way I Will Ever Be Able To Damage Or Wear Out This Kfi Model Using It The Way I Do. Works With Rope Up To 7/16". The Only Change I Would Make Is A High-viz Coating (will Be Applying Spray Paint). Also I Can't Tell If It Was Made In The Usa Which Would Be A Bonus. Use With A Tree Saver.

Kfi-products-atv-sb-snatch-block-(auto-accessory) set picture

- T. ClaraWow! I Have Not Got A Chance To Use The Snatch Block Yet. But Its Almost Guaranteed It Will Get Used Pulling Out Stuck Sxss And 4 Wheelers This Weekend. After Noticing The Drain Just A 1000lb Wench Puts On A Lawn Mower Battery. It Will Definitely Get Used Alot! I Was Really Surprised At How Small The Block Is And That Its Not Going To Take Up A Lot Of Space In My Sxs Tool Box That's A Big Plus!!!! Thank You Kfi Products! I Can See This Becoming My Go To Tool When Moving Large Tree Limbs Off My Property.

This Is Far Better Than Another Snatch Block That I Purchased That Has A Hook On It. I Have Used It To Give Me A 2:1 Mechanical Advantage Pulling Several Large Waterlogged Logs From A River And It Works Perfect Every Time. The Other Snatch Block Blew Apart On Me While I Was Pulling A Log And I Had To Put A Bolt Through It To Keep It Together.

P. Benton, Hawaii

KFI PRODUCTS ATV-SB SNATCH BLOCK Pros
Brand :    kfi products
Weight :    2.00 pounds
  • Over-all size: 3. 00in. w x 5. 75in. l x 1. 375in. d.
  • 1-1/2in. diameter holes for hooking onto.
  • Dark grey powder coated.
  • 3/16in. material.
  • Doubles your winches lbs. rating.
Price :    $12.75 (was $15.70)
Model :    ATV-SB
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (kfi products product review) for KFI Products ATV-SB Snatch Block available as-of ( May 2019 )

MICTUNING Momentary LASER Rocker Switch WINCH IN/OUT, On-Off-On, 20 Amp 12V LED Light, 7pin, BLUE

Great Product Works Just For What We Needed It For!

Mictuning ls09901 20 amp 12 volt on-off-on rocker switch laser etched led light bar with two l. E. D. Lights. Double pole single throw on-off-on switch. Black hard surface rocker. Surface size is 2" (50mm) x 1"(25mm). Standard size mounting hole 1. 41"(36mm) x . 86"(22mm). This is the standard size of most switch holes in modern vehicles. Upper light is on when the switch is pressed up. Lower led is on when the switch is pressed down. Lower led is independent and can be wired to separate dash light circuit. For eg, the rocker switch can be usd to control 2 seperate led lights bars with mictuning brand 2 lead wiring harness. No rear barriers between terminals. Lower light waterproof rating of ip66. All symbols are laser etched directly onto the switch face to ensure long image life.

MICTUNING Momentary LASER Rocker Switch WINCH IN/OUT, On-Off-On, 20 Amp 12V LED Light, 7pin, BLUEMICTUNING-Momentary-LASER-Rocker-Switch

Mictuning momentary laser rocker switch (LS09901) FAQ.

Just What The Cat Dragged In Or Out! Sweet Dash Switch! -Notice from K. Emma, Windsor and Maidenhead

Click to Show mictuning momentary laser rocker switch (ls09901) Details

Great Switch And It Is A Spring Switch It Returns To Center

Mictuning-momentary-laser-rocker-switch-(ls09901) set picture

- D. AnonymousPlugged Into Existing Plug And Worked With No Issues.

Hooked Up And Will Not Work Only In One Direction Have Tried Everything

I. Zelda, Sutton

MICTUNING MOMENTARY LASER ROCKER SWITCH WINCH IN/OUT, ON-OFF-ON, 20 AMP 12V LED LIGHT, 7PIN, BLUE Highlight
Brand :    mictuning
Color :    Black
Weight :    0.2 pounds
Model :    LS09901
Quantity :    1
Order click here :    normally ships in 24 hours
  • Single pole double throw on-off-on switch
  • Black hard surface rocker, with 30pcs shot wire and connectors
  • 7pin on-off-on 20 amp 12 volt rocker switch can control 2 circuit
  • All symbols are laser etched directly onto the switch face to ensure long image life
  • Laser etched backlit with two led
Price :    $11.99 (was $16.99)
Automotive Parts And Accessories :    Best Auto Accessory (mictuning product review) for MICTUNING Momentary LASER Rocker Switch WINCH IN/OUT, On-Off-On, 20 Amp 12V LED Light, 7pin, BLUE available as-of ( May 2019 )

superwinch 1145220 terra 45 atv & utility winch 4500lbs/2046kg rating Price : 244.99, was : 248.99 as 2017-03-21
USUKDEFRESITJPCNCAGlobal
United States
Great Britain
German
France
Spain
Italy
Japan
China
Canada
World Wide
Superwinch 1145220 Terra 45 Atv & Utility Winch 4500lbs/2046kg Rating (Auto Accessory) Reviewed by on jerdus.com

Top superwinch 1145220 terra 45 atv & utility winch 4500lbs/2046kg rating (auto accessory) Content

The F.A.Q. for superwinch 1145220 terra 45 atv & utility winch 4500lbs/2046kg rating

I installed on my 2012 honda rancher 420, i also ordered the kfi products winch mount 100705 and kfi products atv-chs winch cable hook stopper. The installation was time consuming (due to my atv compact size) but easy install. I followed the directions for the winch and mount, one picked up where the other left off. I have not yet put it to a load test but functions just as described on first try. Everything included! winch, synth rope, hook, flylead, 10' remote, remote plug-in, handlebar mounted thumb switch, contactor, auto reset breaker/fuse, wiring, nuts bolts, and even wire ties (white, although i used black to be discrete). The quality and engineering of this item seems to be top notch! . Minor modification needed for the bumper cover and skid plate, (due to limited space on compact atv), but easily done with razor knife or dremel tool (i used both). Great price and fast 2 day shipping with online store prime made the deal all the sweeter!

A number of questions have been asked here.

Q&A

(0) Question: hi again. is the 1145220 terra 45 winch strong enough to pull a 4000 pound car on a trailer? thank jerry


(1) Question: does it come with the mounting plate or do you purchase it seperatly?


(2) Question: what is the feet per minute line speed


(3) Question: do i need a mounting plate for my john deere gator 825i?


(4) Question: does this come with everything you need to mount it and have it operational with an arcticcat 500 xt efi ?


(5) Question: i bought the terra superwinch #1135230 & mounuting plate #2202890, do i need the roller fairhead plate & if i do what would be the part #?


(6) Question: does it come with all the same electrical parts as in the picture of the superwinch 113520 terra


(7) Question: what mounting plate works with a honda pioneer 700-4 ?


(8) Question: can you reverse the winch with the remote


(9) Question: is this water prrof



(note) Question: where/how to get Superwh (manufacturer's brand) accessories & similiar Superwh's products

Answer:

Click the marked text to copy link to Clipboard

Installed on my 2015 grizzly 700 eps se. Has plenty of torque, enough to drag my 4 wheeler up a sand hill in the creek with the brakes locked effortlessly. The motor is nice and quiet and can barely hear it over the stock exhaust. The synthetic rope is great, but keep in mind it has to be cared for and cleaned. Wrapping it tight on the drum will keep the rope from burying itself when its put under a load. Just tie off to a truck and have a buddy lightly brake while you guide the rope on the spool. Either way its better than cable imo despite not being as abrasion resistant. I highly recommend the factor55 prolink xtv. It is a way better option for recovery than the plain hook. . The supplied 6 gauge wire was more than enough to run to the very back, if your 4 wheeler has a battery installed at the rear. On the grizzly, the battery is under the front rack, so i had to cut 6 feet off every cable and crimp/solder new terminals to make a nice clean install. Speaking of wiring its very simple and the solenoid and winch is color coated for which wire goes where. . Pros: powerful motor, steel drum for synthetic rope, plenty of cable for installation, quiet operation. . Cons: circuit breaker is not the best for mounting. Its all exposed 12v on the body so you have to isolate it from coming in contact with metal. Large heat shrink in a few layers will solve this problem. But i feel they could have supplied one with a plastic body instead. Oh well, its an easy problem to fix.


Automotive 18148651, Exterior Accessories 11575851, Towing Products & Winches 15273751, Winches 19573751Top Superwinch 1145220 Terra 45 Atv & Utility Winch 4500lbs/2046kg Rating (Auto Accessory) FAQ Content

Best superwinch 1145220 terra 45 atv & utility winch 4500lbs/2046kg rating (auto accessory) in review

I bought this to replace my warn 2500 that blew up on my '04 honda rancher. It was a perfect fit and the install was straight forward. A few people mentioned on these reviews that the rocker switch was reversed when wired as per directions (in made the winch let line out and vice versa). You physically had to swap two wires on the solenoid. I wired it exactly as the directions said and mine came out perfectly. Works awesome. . I had to use the winch a few times today. My atv got stuck a few times in the super deep snow. The winch pulled without breaking a sweat. I could not believe how quiet and smooth it runs. It made me realize just how loud my old warn winch was (before it blew up). It sounded like shaking a bunch of marbles in a coffee can. . I swapped out the steel cable to synthetic rope and and went with an aluminum hawse fairlead. I put a few u bolts on the end of the steel cable and use it as a spare extension to give you a few more feet in case there isn't a tree nearby. I wrapped it up and zip tied it under my rack. This winch is awesome and is soooo much better than my buddies' warn winches and my old winch. Buy this winch and save some of your hard earned money! do it now!

D. Erickson, Portsmouth

You might like to see 80w High Power Osram Xtremely Super Bright 2504 Psx24w Led Bulbs White Fog Light This Listing Features One Pair (2 Pieces) Super Extremely Bright High Power 80w Osram Psx24w Led Bulbs Especially Designed For Replacing Fog Light, Or Daytime Running Light (drl) Or -Alla Lighting 80w High Power Osram Xtremely Super Bright 2504 Psx24w Led Bulbs White Fog Light Lamp
  1. Additional: Osram Technology, High Lumen, Long Term Lasting, No Orverheat Issue.
  2. Additional: Much Lower Price Compared To Cree 80w Led, But Brighter Light Output.
Half Price Alla Lighting Xtremely Bright Psx24w (Auto Part) Alla 2504 80w White Alla Lighting Xtremely Bright Psx24w (Auto
Or you might like to consider Sylvania Zevo White Contains Bulbs (Sylvania) Sylvania Zevo Led Bulbs Deliver A Brighter, Whiter, Sharper Light. As Easy As Changing A Light Bulb, You Can Have Improved Performance And Safety For Interior And Exterior Applications. Auto Part
  1. Spotlight: This Product Comes With A Limited Lifetime Warranty.
  2. Spotlight: High Reliability With Over-engineered Thermal Management To Guarantee Exceptional Performance Through The Lifetime Of Your Vehicle.
Best Price Sylvania Zevo 3157 White Led Bulb, Contains 2 Bulbs (Auto Part) 3157led Bp2 Sylvania Zevo 3157 White Led Bulb, Contains 2 Bulbs

N. Rochelle, York says

This is by far the best winch i have purchased and for the price, i have owned several winches, warn, venom, extreme, torx and so on and for the price you cannot beat this winch. The pull power is awesome, ease of installation. Instructions are vague but if you have installed a winch its a snap. They didn't cut any corners at all it seems on this winch and i couldn't be happier. I was always unhappy that i settled for the less expensive winch on my utv and i am certainly glad it finally gave out and i ran across this one. It beats the honda warn winch and the price tag of 649. 99. Now the most amazing part is the quietness of the motor, it was unreal compared to warn, venom extreme this is almost whisper quiet and the utv is just a little louder. No more racket and sounding like things are coming apart. I strongly recommend this if you are looking for a good by and a great product!

H. Medina, Languedoc-Roussillon

Has everything you need to install on a sxs. I had to swap the cables around so i could use the longer ones to reach my battery on my pioneer 700. Havent had to use it yet, but sure it'll do the job. Lifetime warranty without the need to save proof of purchase.

W. Sarah, Thueringen says

Put this on my loader forks for pulling out trees and it works just fine. I'm pulling out 5"trees using a pully block. Pull to stall point and listen for the roots to start popping and hit the switch again. It keeps popping more roots and there it comes. I put this on my forks so when i pull it pulls the forks into thr dirt making this my anchor. I use the winch only 1 or 2 times a month and it seems to work for me. The only problem i had was the roller bent up because of the angle i was at. Roller mount is a little weak but bent it back and your good to go. I hoped this helps

B. Guest, Hawaii

I bought this on black friday for a real good price($168). I needed to pull a non running car up a 40 ft long incline than onto a trailer. It made very light work of that job. I later used it to pull some pine trees out of the ground which it also handled with ease. I than used it to recover some beams from an old barn that fell down. That involved some pretty hard pulls and it actually started moving the back end of the 3/4 ton diesel truck i had it attached to via the receiver, but it never stopped pulling. (truck was on snow) it has done everything i have asked without issue and seems to be plenty strong. I made an adapter that allows this winch to be plugged into a receiver and had it hooked up to a 1/2 ton extended cab long bed that weighs 6200 lbs. On a gravel drive with all four of the trucks wheels locked, it pulled the truck. Simply an amazing little winch. . Only 2 complaints:. The wire rope kinks if you do not wind it back on the drum neatly while pulling hard. I may have been better off getting the synthetic rope version. . My biggest complaint is that i wired it up exactly as the directions said to and out is in and in is out. That really bugs me since i made a nice receiver mount with a box to house the electronics and cut all the wires to fit neatly, so i can't swap it without buying more wire.

O. Smith, Halton says

Great packaging and good looking product. The wiring and terminals are well made and switches/relay are well made and thought through. The installation was very easy with the exception of routing of all the wires which has nothing to do with the quality of this kit. The only issue i had was the four bolts that attach the winch to the plate; they should be grade 8 and i'm not sure they are even grade 5. I had one of the nuts strip out after only applying moderate torque. This can be easily fixed by replacing the bolts and nuts with grade 8 hardware. After install everything worked smoothly and very well. I haven't had a chance to use it yetin the field but i have no doubt it will work very well.

K. Morgan, Peterborough

Nice winch. Very strong. I installed it on my 2013 polaris ranger crew 800. The blue anodized aluminum fairlead almost perfectly matches my ranger's paint. . This was my first winch installation, and it took me about an hour or so. Be sure to use the correct set of instructions for your application. If your machine's battery is in the rear, there's a bit different wiring schematic to follow. . It came with a hand-held remote and a switch to mount on the dash (or wherever). I bought the suggested mounting bracket, and it worked perfectly. It was nice that i didn't need to buy anything else to finish the job. With no chance of grabbing a sharp broken steel wire, i really like the synthetic cable. . I've used the winch several times in the last 4-5 months, with no problems whatsoever. I even used it to move an old shed (10'x10') about 100' on my property that hadn't been moved in 20+ years. The shed had a bunch of old stuff inside, and i figure weighed 2000+lbs. This isn't huge, but the skids under the shed were probably 4" in the ground, which definitely gave a lot of resistance. I obviously had to hold the brake, but the winch showed no sign of weakness. . Highly recommended. I'll definitely buy superwinch products again for future toys.

Q. Valencia, Torbay says

After much research and review i finally settled on this winch. I have owned severl different kinds over the years and have always been confused by the wide range of prices for the same size winch. Once i determined that the permanent magnet motor was suitable for my application it narrowed the field considerably. Reviews like this one helped a lot in the process. I mounted it on a polaris ranger and used a 2" receiver mount so i could pull from either end. Instalation was not difficult but be forewarned that this is not a fully self contained unit. There is a separate selenoid that must be mounted and wired into the vehicle ignition system. There is also a socket for the remote control cable that must also be mounted if you intend to use that feature. If i had it to do again, i would probably go wireless since i have found other uses for the winch and am usually by myself. Wireless would give me the range i need sometimes. I got the rope instead of the cable and i love it. Expensive option but well worth it in my opinion. I have used it to pull the ranger out of the mud on 4 or 5 occasions and so far it has worked flawlessly. Plenty of power and the clutch is the easiest to use of any of my previous winches. I am very satisfied.

W. Rebecca, Camden

Five stars for now. Have only used a handful of times. Installation was pretty straight forward. Im not overly mechanical and i found it pretty simple. Luckily, the dry box under my seat has a lot of space for mounting the solenoid and breaker. I'm sure if you have a small area, you'll want to shorten the cables, as they come with very long cables that have slack even when ran all the way to under the seat of a 4 wheeler. Looks good and operates good so far, seems to be a good deal for the price. I did have to modify my bumper guard to fit the 3500lb winch in there, as it's pretty thick on the engage/disengage side.

K. Nielsen, New Mexico says

The winch seems like it will be fine. Other than testing, i haven't put it to good use yet. I was a little upset that the battery cables were relatively short to hook it to the solenoid. Instructions said to mount in a dry place, so i picked the upper "firewall" of the polaris rzr. Unfortunately the battery cables were not nearly long enough for that. It was either mount it by the battery (under the seat, prone to submersion), or buy more wire. I opted with buying 6 ga wire (about 20 feet total) to complete my install on the upper firewall. I was also upset that the circuit breaker did not have an isolation box. To use this breaker you have to hook the positive (+) side to the battery and the other side to the positive (+) portion of the solenoid. This is fine, except the contacts are exposed metal plates that the circuit breakers are hooked to; so there is no bolting it down to metal (it would short out) or any real way to secure it from possibly touching metal. I purchased a dry electrical box at lowe's and made a isolation box on my own. Obviously you don't have to use the circuit breaker, but it is a good idea. Other than that, there is plenty of wiring for the thumb switch, the remote plug, the remote wire, and the contact wires from the solenoid to the winch. The instruction manual was adequate, and everything needed for installation to the mount was there.

D. Annette, Wigan

Great winch perfect fit for can am outlander lmax 2016. No winch plate needed. Mounted right up. Buy a rubber hook stop to keep your hook from being sacked through the rollers. I spoke to a can-am dealership on her about how much it would cost me to have a winch installed and it's a 7 to an $800 option and they will only mount if i'm not mistaken warn winches or something made by bombardier the superwinch is absolutely perfect and it'll save you hundreds and hundreds of dollars stay away from the dealership install it's a complete rip-off. Find yourself an atv mechanic on the side if you need help it beats paying the price at the dealerships

V. Kellie, Brandenburg says

Terra 45 winch looks very nice. I installed on the front of a 2015 honda pioneer 500 by making a mounting frame from 2" (3/16" thick wall) square tube. I haven't had a chance to try the winch as of yet but the included power cords were plenty long enough to mount the winch in the front and reach the battery box in the rear. The in/out switch i spliced into the accessory outlet for power to the solenoid.

S. Pete, Corse

I bought this winch for my grizzly 660 and couldn't be more pleased. Installation was easier than expected and the quality is top notch. The install instructions were good, the wiring and components were heavy duty. My last atv had a warn 2500lb winch, which i admit was well worn and probably abused, but the superwinch is much better. The warn overheated and stopped working often, under reasonable loads and short periods of use. I have had the superwinch for about 4-5 months and have used it quite a bit with no surprises. It pulls very hard and has dragged me and my buddies out of some nasty deep stuff. I have had the superwinch completely submerged in water and mud and used it in sub zero temps up to 90 degrees and it has worked without any issues whatsoever. I have heard some bad things about superwinch's lower end winches, but the terra line is supposed to be their higher end ones and i am planning on putting another one on my next wheeler. I highly recommend, you won't be disappointed.



Leave a Reply

You must be logged in to post a comment.


Top superwinch terra atv utility winch Review Content

Related Products

Product Image Gallery

Top-superwinch-1145220-utility-4500lbs-2046kg-1777034zye5u-Content