Torin T43006 Suv Jack Stands – 3 Ton, 1 Pair (Auto Accessory) 781

Review for torin t43006 suv jack stands

Price was $35.04. These Jack Stands Are Ok. If I Had Seen Them In A Store I Wouldn't Have Purchased Them. The Welds Are Not Very Good And The Stands Are Only Welded On One Side Of Each Seam. I Haven't Had Any Problems With Them Though. They Just Make Me A Little Nervous. Inspect Them Carefully Before Each Use!

-T. Cageen

Torin T43006 Suv Jack Stands – 3 Ton, 1 Pair Auto Accessory T43006

  1. Properties: Meets ANSI requirements
  2. Properties: 2 heavy duty steel jack stands at one low price

Torin-t43006-suv-jack-stands: Torin Auto Accessory Torin 3 Ton Suv Jack Stand Features A Double Locking Pawl And Tooth Design For Extra Protection. The

Buy Now

  1. Content
  2. More Option
  3. Related

2 Heavy Duty Steel Jack Stands At One Low Price. Meets ANSI Requirements. Double Locking Pawl. One Piece Multi Position Ductile Ratchet Bar. Quick Adjustment Mechanism Properties Torin T43006 SUV Jack Stands - 3 Ton, 1 pair.

Torin T43006 SUV Jack Stands - 3 Ton, 1 pair Overview (T43006)

Torin T43006 Suv Jack Stands - 3 Ton, 1 Pair

  • Order : Automotive
  • Brand : Torin
  • Color : Red
  • EAN : 0615268430065
  • Manufacturer : Torin
  • Warranty : Parts
  • Model : T43006
  • MPN : T43006
  • Total Items : 1
  • Quantity : 1
  • Part Number : T43006
  • Group : Automotive Parts And Accessories
  • Category : AUTO ACCESSORY
  • Title : Torin T43006 SUV Jack Stands - 3 Ton, 1 Pair
  • UPC : 615268430065

Automotive Torin T43006 Suv Jack Stands - 3 Ton, 1 Pair T43006 Best Buy Automotive Parts And Accessories 615268430065 Torin, Torin T43006 Suv Jack Stands - 3 Ton, 1 Pair 0615268430065. torin 3 ton suv jack stand features a double locking pawl and tooth design for extra protection. the one piece multi-position ductile ratchet bar provides super strength and durability. the quick adjustment mechanism securely locks it into the desired location hence providing superior safety. ansi certified and 100% factory tested for reliability and safety. large saddle and base for added safety with a lifting range of 14" to 20-1/2" Torin T43006 Suv Jack Stands - 3 Ton, 1 Pair Auto Accessory T43006.

Torin Automotive T43006: Torin T43006 SUV Jack Stands - 3 Ton, 1 pair

3 ton is a bit of an overkill for my 2007 trailblazer, but these adjust to the perfect height for it and my wife's 2003 f-150. My vehicles are stock height and the 2 ton jacks heightest point was about an inch too low. I only use about half of the lifting height on these 3 tons for the vehicles. Seem to be high quality and have held up well.

Click to see NoticeTorin T43006 Suv Jack Stands - 3 Ton, 1 Pair (Auto Accessory)"Well built, sturdy jacks that i can feel comfortable putting under my 4-runner. They are easy to operate and i feel confident that they will withstand the weight that my truck bares on it."

Torin-t43006-suv-jack-standsTorin T43006 SUV Jack Stands - 3 Ton, 1 pair (Switch to Mobile/Desktop Version)

YM W4194 Solid Rubber Wheel Chock with Handle, 8-3/4" Length, 4" Width, 6" Height - Pack of 2

This Durable Solid Rubber Wheel Chock Designed For Use With Heavy-duty Loads. Non-slip Rubber Bottom Maximizes The Grip When Vehicle Is Parked On The Chock.

YM W4194 Solid Rubber Wheel Chock with Handle, 8-3/4" Length, 4" Width, 6" Height - Pack of 2YM-Rubber-Handle-Length-Height

Brand :    ym
Weight :    8.10 pounds
Model :    W4194-PK2
Quantity :    2
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (ym) reviews for YM W4194 Solid Rubber Wheel Chock with Handle, 8-3/4" Length, 4" Width, 6" Height - Pack of 2 available as-of ( Oct 2019 )
Unique built-in rubber handle for easy transportRubber resists tearing, abrasion, ozone weatheringPack of 2This durable, solid rubber wheel chock designed for use with heavy-duty loadsNon-slip rubber bottom maximizes the grip when vehicle is parked on the chock

FloTool 11930MI Heavy Duty Wheel Chocks, Set of 2

Keeps Tires From Rolling And Serves As A Safety Device To Use With Ramps Or Other Lifting Devices. The Product Should Be Used Only On Flat Surface. Push Firmly Under Tires. Use In Pairs - 2 Per Tire. Not For Commercial Use.

FloTool 11930MI Heavy Duty Wheel Chocks, Set of 2FloTool-11930MI-Heavy-Wheel-Chocks

Brand :    hopkins
Weight :    0.90 pounds
Model :    11930MI
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (Automotive Parts And Accessories) reviews for FloTool 11930MI Heavy Duty Wheel Chocks, Set of 2 available as-of ( Oct 2019 )
Made of durable plasticNot for commercial useNestablePrevents tires from rollingIncludes two chocksSafety device to use with ramps or other lifting devices

FloTool 42003MI Drain Container, 16 quart

Flotool By Hopkins Manufacturing Offers The Most Comprehensive And Highest Quality Offering Of Fluid Handling Products. Flotool's Success Has Been Driven Through Innovative No-mess Product Solutions That Turn Basic Funnel And Spouts Into Higher Value Products. Whether You're Changing Your Oil Topping Off The Antifreeze Or Checking All Your Automotive Fluid Levels Flotool Has The Right Application. No Brand Offers More "just-right" Fluid Handling Products Than Flotool. The 16 Quart Drain Container Offers Robust Features That Last And Eliminate The Typical Oil Change Mess. It Is Proudly Made In The Usa.

FloTool 42003MI Drain Container, 16 quartFloTool-42003MI-Drain-Container-quart

Brand :    hopkins
Size :    pack 1
Model :    42003MI
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (hopkins) reviews for FloTool 42003MI Drain Container, 16 quart available as-of ( Oct 2019 )
Extended design captures the full stream of oil eliminating messesDeveloped for high capacity for multiple changes and large equipmentLeak proof design for secure disposalIntegrated handle and grip for easy carrying and handlingStores upright or flat without leaking

3 Ton Heavy Duty Ultra Low Profile Steel Floor Jack with Rapid Pump Quick Lift

Low Profile Floor Jack With Rapid Pump Lifts Your Vehicle With Just 3-1/2 Pumps This Heavy Duty 3 Ton Jack Gets Vehicles Almost Two Feet Off The Ground. Extra-low Profile Reaches Under Most Show Cars. Dual Piston Rapid Pump Technology Lifts Most Work Loads In Just 3-1/2 Pumps.

3 Ton Heavy Duty Ultra Low Profile Steel Floor Jack with Rapid Pump Quick LiftHeavy-Ultra-Profile-Steel-Floor

Brand :    pittsburgh automotive
Color :    Dark Gray
Weight :    79.00 pounds
Order click here :    normally ships in 2-3 business days
Home Improvement :    Best Tools (pittsburgh automotive) reviews for 3 Ton Heavy Duty Ultra Low Profile Steel Floor Jack with Rapid Pump Quick Lift available as-of ( Oct 2019 )
Two piece knurled steel handle for a sure grip, equipped w/ foam bumper to prevent damage to vehicleRapid Pump® exclusive dual parallel pump system lifts with far fewer pumpsLow profile for easy placement under custom vehicles, Extra-wide steel casters for stabilityUniversal joint release provides precise load control in any handle positionIndustrial quality for professional mechanics and hardcore automotive enthusiasts

TEKTON 24335 1/2-Inch Drive Click Torque Wrench (10-150 ft. -lb. /13. 6-203. 5 Nm)

Calibrated To An Accuracy Of +/- 4% The Tekton 1/2 In. Drive Click Torque Wrench Lets You Work With Confidence Eliminating Guessing And The Common Tendency To Overtighten Fasteners. Correctly Tightening Fasteners To A Vehicle Or Equipment Manufacturer's Torque Specifications Ensures Parts Are Properly Secured Without Being Damaged. Simple And Easy To Use This Wrench Has A Reversible Ratcheting Head That Drives Fasteners In Both Directions And Measures Torque In The Clockwise Direction. To Measure Torque Set The Desired Value On The Handle Scale (foot Pounds Or Newton Meters) And Begin Tightening The Fastener. When The Preset Torque Value Is Reached A Reliable Mechanical Operation Inside The Handle Produces A Click You Can Hear And Feel Alerting You To Stop Applying Force. Built For Consistent Performance And Years Of Dependable Service The Mechanical Design Doesn't Need Batteries And The All-steel Construction Has No Plastic Parts To Break Or Wear Out. Important: This Wrench Is Shipped Pre-calibrated And Ready To Use. To Help Maintain Calibration Store At Its Lowest Setting Of 10 Ft. -lb. /13. 6 Nm When Not In Use. Be Sure To Read And Understand The Operator's Manual Including All Safety Information Before First Use. Includes:(1) 1/2 In. Drive Torque Wrench(1) Storage Caseoperator's Manual With Torque Conversion Chart

TEKTON 24335 1/2-Inch Drive Click Torque Wrench (10-150 ft. -lb. /13. 6-203. 5 Nm)TEKTON-24335-2-Inch-ft-lb-13-6-203-5

Tekton 24335 1/2-inch Drive Click Torque Wrench (10-150 Ft.-lb./13.6-203.5 Nm) (Tools) Review

I Got This Wrench For Torquing Tire Lug Nuts To The Proper Oem Torque. This Wrench Is A Little Over 18 Inches Long And Provides Plenty Of Length To Easily Torque Tire Lug Nuts. It Is A Great Range For This Application On Normal-sized Vehicles. It Is A Righty-tighty Torque Wrench And Works Great For What I Bought It For. As Others Have Mentioned Some Bike Parts Are Opposite Of Standard Threading So A Different Torque Wrench May Be Required For That If You Want It To Work Out Of The Box. However The Internal Torque Head Insert Can Be Flipped To Make It Lefty-tighty If Needed. So While It Wont Work For Bikes Other Lathes Out-of-the-box It Can Be Made To Work. The Case That Comes With The Torque Wrench Is Nice And Simple And Does The Job Of Protecting The Wrench. The Instructions That Came With The Wrench Were Also Useful. Even Better The Wrench Box Came With A Qr Code Printed On It That Links To A Youtube Video Showing To Use The Tool. I Am Very Impressed With All Of This "extra" Useful Stuff That Tekton Provides. I Have Noticed This Kind Of Extra Dedication From Tekton Over Multiple Product Lines. I Look Forward To Using This Wrench For Years To Come! Pros: *easy To Use For Tire Lug Nuts *great Instructions That Explain How To Set The Torque And Use The Wrench *simple Yet Useful Case Cons: *none So Far Additional Considerations: Be Aware Of The Torque Range Provided By The Wrench! If You Need 0-10lbs Or 150lbs You Will Need A Different Wrench. Overall: 5/5 Stars ( . 5 Rounds Up . 5 Rounds Down) 5 Stars If You Have Any Further Questions Regarding The Product In My Review Please Leave A Comment Below And I Will Get Back To You As Soon As Possible.

Review from A. Paula, New Jersey

Review from T. Cassella, Merton

Worked Great For 7 Bolts At 80 Ft/lbs. Broke On 8 Ratchet Screw Shot Out Somewhere In My Garage No Longer Functions.

Image of Tekton-24335-1/2-inch-drive-click-torque-wrench-(10-150-ft.-lb./13.6-203.5-nm)-(tools)

Bought This To Do Some Engine Work On My Classic Mustang. I Made It Through Three Bolts (40 Lbs 90 Lbs 25 Lbs) And Now It No Longer Ratchets Or Works. At First It Only Seized When You Were In Tighten Mode (given Probably The Most Important) But As I Was Trying To Free It It Completely Locked Up. Spend The Money And Buy Something A Bit Higher Quality That Carries A Longer Warranty. For What It's Worth I Picked Up A Husky One From Home Depot (which Was Twice The Price - $80) But It's Phenomenal. Purportedly It's An Armstrong Industrial Torque Wrench Sold Under The Husky Brand.

Anyone Can Spend $12. 00 At Harbor Freight And Buy A Pot Metal Torque Wrench. This Wrench Is Heavy Duty And Worth The Extra Cost!

U. Angela, Alabama

TEKTON 24335 1/2-INCH DRIVE CLICK TORQUE WRENCH (10-150 FT. -LB. /13. 6-203. 5 NM) Pros
Brand :    tekton
Weight :    2.20 pounds
Model :    24335
Quantity :    1
Order click here :    normally ships in 24 hours
Home Improvement :    Best Tools (tekton) reviews for TEKTON 24335 1/2-Inch Drive Click Torque Wrench (10-150 ft. -lb. /13. 6-203. 5 Nm) available as-of ( Oct 2019 )
High-contrast dual-range scale is easy to read, even in low lightShips pre-calibrated to +/- 4% accuracy and ready to useWrench emits a click that can be heard and felt when the preset value is reachedReversible ratchet head drives in both directions and measures torque in clockwise directionDurable all-steel construction has no plastic parts to break or wear out

Torin T83006 SUV Service Jack - 3 Ton

The Torin Big Red 3 Ton Trolley Jack With Suv Height Extender. Features An Additional Height Extender That Saves Time And Makes It Easier To Lift Higher Vehicles. This Jack Comes In Handy For Do-it-yourself Repair Around The Garage Or On The Side Of The Road. You Can Easily Lift Cars Pick-ups Suvs And More With Less Effort. Its Handle Operates Conveniently And Ergonomically To Lift Heavy Loads With Little Effort. You Can Easily Maneuver It To The Required Spot As It Has Easy-gliding Swivel Wheels. Its Compact Size Doesn't Take Up Much Storage Space. Constructed With A Nodular Cast Iron Pump And Supported With High Strength Steel This Jack Will Help To Lift Large Loads Safely. Lifting Range 5-7/8in. To 20-7/8in. This Unit Is Factory Tested For Reliability And Safety To Meet Asme Standards.

Torin T83006 SUV Service Jack - 3 TonTorin-T83006-SUV-Service-Jack

TORIN T83006 SUV SERVICE JACK - 3 TON Advantages
Brand :    torin
Model :    T83006
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (torin) reviews for Torin T83006 SUV Service Jack - 3 Ton available as-of ( Oct 2019 )
Integrated overload protection valve prevents the lifting of items in excess of capacityPositive locking safety release handle for exceptional safety during useConstructed of high-grade steel and built to exacting standards for quality and durabilityLarge saddle surface area provides better contact with the load being supportedMeets ASME PALD standards

Blackhawk B6350 Black/Red Fast Lift Service Jack - 3. 5 Ton Capacity

Fast Lift To The Jacking Point Blackhawk B6350 Service Jack Is A 3-1/2 Ton (7000 Lbs) Capacity Service Jack That Features The Unique Design Of Fast List Technology To Fast Lift To The Jacking Point With No Load. It Features The Swivel Saddle That Provides You With The Easy Jack Positioning And User Safety. Its Heavy Duty Steel Construction Also Provides You The Safe Use And Long Term Durability. Blackhawk B6350 Service Jack Also Features The Bypass Device That Preventing The Damage From Over Pumping. Blackhawk B6350 Service Jack Also Features The Built-in Internal Safety Valve And Vent Plug To Ensures The Safe Operation. - 3ton (7000 Lbs. ) Lift Capacity - Fast Lifting Technology - Heavy Duty Steel Construction & Swivel Saddle - Built-in Safty Valve And Bypass Device Blackhawk B6350 Service Jack Is Backed By The Full One Year Warranty From The Date Of The Purchase. Click The Buy Button Now To Get Your Long Lasting Professional Sevice Jack

Blackhawk B6350 Black/Red Fast Lift Service Jack - 3. 5 Ton CapacityBlackhawk-B6350-Black-Fast-Service

Brand :    blackhawk
Color :    Black/Red
Weight :    85.00 pounds
Model :    B6350
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (blackhawk) reviews for Blackhawk B6350 Black/Red Fast Lift Service Jack - 3. 5 Ton Capacity available as-of ( Oct 2019 )
Swivel saddle and rear caster for easy positioningBuilt-in internal safety valve ensures extra safetyRolled side frames add strength and rigidity to reduce twistingHeavy-duty steel constructionBypass device prevents over pumping

Powerzone 380044 3 Ton Aluminum and Steel Garage Jack

The Powerzone Heavy Duty Steel And Aluminum Garage Jack Lifts From 4 Inch To 18-1/4 Inch And Supports 3 Tons. The Jack Has A Lightweight Aluminum Frame And Heavy Duty Steel Lift Arm For Strength And Durability. The Quick Lifting Hydraulic System Saves Time And Is Equipped With Safety Valve To Prevent Overloading Beyond Rated Capacity. The Jack Is Equipped With A Rubber Padded Saddle And A Foam Covered Handle To Protect Vehicle Frame. Real Wheels Swivel For Easy Movement And Positioning Over Rough Surfaces.

Powerzone 380044 3 Ton Aluminum and Steel Garage JackPowerzone-380044-Aluminum-Steel-Garage

Powerzone 380044 3 Ton Aluminum Steel Garage Jack (Milestone Tools) Review

This Is Not A Jack It's A Monster Jack Well Made Strong Fast Well Desing Less Heavy That Other 3 Tons Jacks. Very Satisfied!

Review from F. Brenda, Trafford

Review from B. Teresa, Iowa

Ok ! The Jack Arrived In A Trashed Shipping Box The Inner Foam Container Holding Jack And It's Parts Is All Busted Up Looks Like Snow Balls. The Jack Lower Handle Has A Padded Foam Cover It Is Cut Up From The Jack Itself. Top Plate On Jack Is Missing Two Holding Screws. Enclosed In Box Is A Operators Booklet With Parts List And Customer Service Contact. I Tried Calling The Customer Service Number Several Times No One Answers And You Can Not Leave A Message. I Sent A Email Asking For Help On Missing Parts After Six Days I Received A Reply To Send My Mailing Address And Missing Parts Will Be Sent. A Week Later No Parts! I Sent Another Email Asking If Parts Were Sent Reply Was Parts Are Back-orderd. A Week Later I Sent Another Email Asking If I Should Return Jack To Online Store Since No Parts Are Available Reply Received Stated' We Will Remove Missing Parts From A Display Jack And Ship To You. About Seven Days Later Missing Parts Arrived Wrong Parts! Not For This Jack. Now Almost A Month Has Past I Give Up !! The Company Never Answers Customer Service Calls You Can Not Leave A Message And They Do Not Know What Parts Are Correct For Their Jacks. The Enclosed Operation Booklet States One Year Warranty Who Can You Contact If You Have Warranty Issues It Might Or Might Not Be A Good Jack But Do Not Expect Any Customer Service From Powerzone. After Your Return Time Is Up With Online Store You Are On Your Own.

Image of Powerzone-380044-3-ton-aluminum-steel-garage-jack-(milestone-tools)

I Was Worried That This Jack Was Just Another One Of Those Rinky Dink Jacks From China Being That There Was No Actual Dimensions Listed In The Specifications On The Online Store Site Or Any Other Site For That Matter. But To My Delight This "mutha" Is A Full Blown 60 Pound Shop Grade Floor Jack. Some Parts Are Made Of Aluminum Thank Goodness Because It Would Probably Weigh In At 75+ Pounds So This Is No Portable It Stays On The Floor. Its Dual Pumping Mechinism Makes For A Short And Smooth Stroke With Its Long Handle Having Plenty Of Leverage. It Is A Little High Towards The Handle Which May Be A Problem With The Ground Hugging Imports But If Jacked From The Side Would Easily Lift The Whole Car. Very Pleased With It Well Made Well Worth The Money. Hank

Edit: I Had The Jack For About 3 Weeks Used It To Lift My Friends Honda Crv Not A Heavy Car By Any Means. I Was Left With My Jack Bleeding Oil All Across The Pavement. The Jack Still Worked As I Describe Below Held The Car Up For Lengthy Amounts Of Time Along With Jack Stands And Didn't Fail Otherwise. Online Store Sent Ups The Next Day To Pick Up The Jack And The New One Is On Its Way. I'm Sure It Was Just A Manufacturer Defect. I Will Post More Later But The 5 Star Rating Is Staying Unless This Happens Again. 5/9/13 Edit 2: The New Jack Arrived Promptly And Has Been Working Great For Over A Year Now. No Leaks No Issues. I Think The First Jack Was Just Defective. Online Store Is Always Quick To Fix Any Errors And My New Jack Is Always Happy To Raise Up Cars. Keeping The 5 Star Rating. Overall A Well Worth It Purchase. 9/3/14 Edit 3: I Have Now Added A Crossbeam Adapter To This Jack. It Is Basically A Steel Tube With Two Jack Pads That Can Be Raised Or Lowered. What This Does It Increase The Lift Range By About 8 Inches And Lift From Two Different Points At Once (say The Side Of The Car Or The Rear Axle). I Did Have To Modify The Cross Beam To Fit The Hole In The Jack But It Works Fine Now. I Bought This At Harbor Freight Tools For $30 After 25% Coupon. 11/10/14 This Jack Is Pretty Amazing. I'm Just A Home Mechanic That Does His Own Auto Work Instead Of Feeding Money To The Local Shops That Tend To Overcharge And Provide Sub Par Work. By This I Mean Some Shops That Do Oil Changes Have Been Lazy And Forgotten To Tighten The Drain Plug So I Got Home And Nearly Blew My Engine Since It Was Out Of Oil. Last Time I Do That For The Special $20 Rate. I Had Previously Bought A Harbor Freight Jack A 2. 5 Ton Low Profile High Lift Jack For Around $75 With Coupon Along With A Set Of 3 Ton Jack Stands For $16. I Used This For About A Month Working On My Civic And Family's Odyssey With Little Problems. It Was A Good Jack And Didn't Disappoint Me. It Was An All Steel Nearly 80 Pound Beast That Had Pretty Incredible Reach For A Jack Along With Low Ground Clearance At 2. 75'' And Lift Range Of 21''. The Only Concern I Had Was Reliability As Seeing Reviews Were Mixed. I Decided To Spend A Bit More Money And Buy This Jack. This Jack Is Simply Amazing. Even Though The Box Says "made In China" It Seems Like A Good Ol' Usa Jack At Heart. It Is Primarily Aluminum On The Construction With Steel On The Lift Arm Mechanism For Strength. The Weight Was Modest At 58 Pounds (i Checked) And The Two Handles Are Good For Lugging Around Since Jacks Are Otherwise Awkward To Carry. I Checked The Statistics That Were Presented On Online Store And Was Pleasantly Surprised. My Measurements Were As Follows: Minimum Height: 3 7/8'' Less Than The Claimed 4'' Height. Max Height: 18 1/2'' Greater Than The Claimed 18'' Height Full Pumps To Max: 5 1/3 Just A Tad Over The Claimed 5 Pumps Also Has A Safety Mechanism To Prevent Overloading And A Non-complicated Air Purge System. The Jack Came With An Abundance Of Lesser Quality Grease Applied Liberally Which I Cleaned Up To Leave The Nice Finish In Tact. The Harbor Freight Jack Worked As Quoted On Their Website Except The Rapid Pump 3 1/2 Pumps To Max. I Never Got Anywhere Near That Number Even After Purging The Air Though It Didn't Really Matter When I Was Jacking Up Various Cars. The Jack Pad Works Great Has A 360 Degree Rotation (though Not Sure What Good It Does) Free Rolling Wheels That Don't Bind And A Removable Handle That Is Good For Breaking Loose Bolts As A Breaker Bar/extension. Materials Look Quality The Bolts Were All Tight Out Of The Box And I Feel Good To Own This Jack (i Was Always Given Concerning Looks From Family With The Harbor Freight Jack Guess People Have Had Bad Instances With Them Though All The Tools I've Bought Have Been On Par With The Competition At A Discounted Price. One Note Is That I Do Replace Any Grease Within A Harbor Freight Product With High Quality Lithium Grease. I Also Pair This Jack With 2 Sets Of Craftsman 3 Ton/pair Jack Hi-lift Stand. They Are Tall At 13 7/8'' At Their Lowest But 21'' At Max. For Most Work It Is Nice Having Tall Jack Stands To Limit The Amount Of Jack Stand Arm That Is Out Of The Stand. Hope People Get What I'm Trying To Say Here. I Tested This Jack On Our Family Scion Xb. It Lifts The Front End To The Max 18 1/2'' Enough For The Jack Stands To Slide Under The Jack Points On The Side With A Couple Of Inches To Spare. I Then Jacked Under Each Suspension Piece The Full 18 1/2'' And Raise The Jack Stands To 3/4 Their Full Height. Done On Each Corner The Car Can Be Up In The Air By 16-17'' Easy Plenty Of Space For Anyone Reasonably Sized To Work Under. Just The Front Half Jacked Up On Stands The Front Of The Car Was 27'' Off The Ground. Plenty For Any Kind Of Front End Work. The Tires Were Off The Ground By A Good 5-6 Inches Overkill For Most People. I've Stated This At Least 4 Times But This Jack Is Awesome And Performs Like A Jack Should. It Instills Confidence In The User And Has Such Good Control For Lowering A Car Super Slow Onto Jack Stands Or Back To The Ground. By No Means Is This A Racing Jack With 58 Pounds It Is Light Enough To Lug Around If Need Be With Handles That Are Awesome But Compared To Aluminum Counterparts It Is Hefty. This Jack Is What I Like To Call Cheap Insurance. It Will Raise Up Your Car With Confidence And Not Drop It Part Way Through And If You Like Will Hold Up Your Car (along With Jack Stands Of Course) Without Any Worries. Your Life Is Worth More Than The Premium For This Jack. Many Of You May Say That Harbor Freight Sells A Comparable Jack (the One I Bought Probably) For Half The Price. Yes The Jack From Hf Was Good But It Was Heavy And Bulky. The Lower Saddle Height Was Nice Though I Don't Know Very Many People With Under 4'' Of Ground Clearance (even So A Scissor Jack Can Lift The Side Of The Car Enough To Get This Jack Under If Need Be). If Extra Height Is Needed A Small Block Of Wood On The Saddle Will Do Though 18'' Is Plenty For Most Applications. I Did My Exhaust On My Car With Under 12'' Of Clearance Before I Had Either Of These Jacks Or High Lift Jack Stands So Anything Is An Upgrade. All In All I Probably Spent A Tad Over $210 For A Great Jack And 2 Sets Of Quality Jack Stands. Guys Its Well Worth It And This Is A Great Jack For The Price (figure In Tax Into The Price Too). If You Have Any Doubts I Will Stand Behind This Jack Until It Decides To Quit On Me Which Will Be After Countless Years Of Oil Changes And Maintenance. Harbor Freight Is Good And Cheap But If You Want Quality You Can Trust Buy This Jack Over The Cheaper Alternatives. The Number Of Positive Reviews For This Jack (and The Few Negative Reviews Complaining About Defects And Such) Sold Me On This Jack. I Will Try To Post A Follow Up Later On This Jack To Show Long Term Progress.

L. Elida, Sandwell

Brand :    milestone tools
Color :    Silver
Weight :    59.15 pounds
Model :    380044
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (milestone tools) reviews for Powerzone 380044 3 Ton Aluminum and Steel Garage Jack available as-of ( Oct 2019 )
Quick lifting hydraulic system saves time and is equipped with safety valve to prevent overloading beyond rated capacityRated capacity: 3 Ton (6000 pounds) with lift range 4 inch to 18-1/4 inchJack is made of light weight aluminum frame to reduce product weight and increase portability, and is equipped with heavy duty steel lift arm for strength and durabilityRear wheels swivel for easy positioningRubber padded saddle protects vehicle frame

TEKTON 5866 12-Inch Oil Filter Pliers

For Filters Up To 4-1/2 Inches In Diameter Choose The Tekton 12 In. Oil Filter Pliers. The Three-position Slip Joint Design Quickly And Easily Adjusts To Size. For A Sure Grip On Slippery Oil-covered Filters Large Teeth Are Set At A Right Angle So That They Bite In Either Direction. Long Handles With Soft Nonslip Grips Offer Extra Reach And Leverage In Tight Places To Go Where Band-style Wrenches Can't.

TEKTON 5866 12-Inch Oil Filter PliersTEKTON-5866-12-Inch-Filter-Pliers

Brand :    tekton
Size :    12 in.
Weight :    1.07 pounds
Model :    5866
Quantity :    1
Order click here :    normally ships in 24 hours
Home Improvement :    Best Tools (tekton) reviews for TEKTON 5866 12-Inch Oil Filter Pliers available as-of ( Oct 2019 )
Three-position slip joint design quickly adjusts to sizeFits oil filters up to 4-1/2 inches in diameterRight-angle teeth grip while turning in either directionSoft, comfortable grips offer nonslip controlLong handles reach into tight spaces

Liftmaster 3 Ton High Lift Floor Trolley Jack for Cars SUVs 4x4s Vans Pickups

Body Frame Was Pressed Using The Same Sheet Of Iron Which Is Much More Rigid Then Conventional Two Pieces Design! Screw Adjustable Saddle Fit A Range Of Heights Seamlessly! Better Than Similar Ones Sold By Other Vendors With Two Sockets For Only Two Different Height. Weight:18kg (40lbs)

Liftmaster 3 Ton High Lift Floor Trolley Jack for Cars SUVs 4x4s Vans PickupsLiftmaster-High-Floor-Trolley-Pickups

Brand :    liftmaster
Color :    Silver, Blue
Weight :    36.38 pounds
Model :    630A
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (liftmaster) reviews for Liftmaster 3 Ton High Lift Floor Trolley Jack for Cars SUVs 4x4s Vans Pickups available as-of ( Oct 2019 )
Lifting range 190-530mm (7.5-21inches)Capacity: 3 Tonne21 inches High Lift suitable for SUVs and off road vehiclesANSI/CE certified for machinery and product safety
Torin T43006 Suv Jack Stands - 3 Ton, 1 Pair (Auto Accessory) Price : 25.95, was : 30.23 as 2017-01-24
United States
Great Britain
World Wide
Torin T43006 Suv Jack Stands - 3 Ton, 1 Pair (Auto Accessory) Reviewed by on

Top torin t43006 suv jack stands - 3 ton, 1 pair (auto accessory) Content

The F.A.Q. for Torin T43006 Suv Jack Stands - 3 Ton, 1 Pair (Auto Accessory)

Not Much To Say They're Jack Stands And They Did Their Job Well Under Half Of A 6700 Pound Truck. Or Else I Wouldn't Be Writing This Review :).

A number of questions have been asked here.


(0) Question: what is the difference betwwen suv (43006) and regaular (43002) 3 ton jack stands?

(1) Question: how high do they go

(2) Question: can these 3 ton suv jack stands be used on a compact car?

(3) Question: does each stand hold 3 tons or does it mean up to a 3 ton vehicle?

(4) Question: would this work well for a four wheeler or zero turn tractor?

(5) Question: would these work for a minivan?

(6) Question: what is the total height when the stands are not raised? (as in, room needed beneath my minivan to slide the stand under.) thanks!!

(7) Question: how wide is the support that holds the frame rail? does it fit nicley on the fram rails or does it just bairly span the with of the frame rails?

(8) Question: can these work on a 97 miata??

(note) Question: where/how to get Torin (manufacturer's brand) accessories & similiar Torin's products


Click the marked text to copy link to Clipboard

I like 'em. Just changed out the front brake pads and rotors on my ram 1500, and just for safety sake, i slipped this under the frame while i worked. The jack held just fine, and didn't have to depend on the jack stands, but i felt safe with them in place.

Automotive 18148651, Garage & Shop 10770751, Jack Stands 14080751, Tools & Equipment 14960751, Vehicle Lifts, Hoists & Jacks 11080751Top Torin T43006 Suv Jack Stands - 3 Ton, 1 Pair (Auto Accessory) FAQ Content

Best torin t43006 suv jack stands - 3 ton, 1 pair (auto accessory) in review

This Review Is For The Torin T43006 3 Ton Suv Jack Stands. I Ordered A Pair Of These Today So I Can Lift My Suburban High Enough To Pull The Transmission Out. I Was Curious About Their 3 Ton Rating On This Pair Of Stands Since Very Few Of The Jack Stand Manufacturers Seem To Say Explicitly Whether The Rating Is Per Stand Or Per Pair Of Stands. To Find Out I Got In Touch With Torinjacks Customer Server And Ask Them. Patricia Rodriguez Was Nice Enough To Reply To Me The Very Same Day And Cleared Up My Question. The Capacity Rating Of 3 Tons Is For Both Stands So Each Stand Will Support 1/2 Of The Pairs Total Rating. Good Enough For Me Now That I Know For Sure And Thank You Patricia For Your Speedy And Courteous Response. My Question To Them Was About The 3 Ton Suv Stands But It Should Apply To All Of Them Unless They Explicitly State Otherwise. My Suburban Weights About 6500 Pounds And I Have Two Pairs Of 3-ton Stands So I Should Have Plenty Of Margin. Most Other Jack Stand Manufactures Label Their Capacity Rating The Same Way As Well Per Pair. Craftsman Jack Stands (some Of Them At Least) Explicitly State The Capacity As "per Pair" But Not Many Companies Make That Little Piece Of Information Clear. One After Thought. I Bought These For The Extra High Lifting Range (lifting Range 14"-20. 68" ) After I Placed My Order I Found Out That The 6 Ton (torin T46002a) Has An Even Higher Lifting Range (lifting Range 15. 2"-23. 8") And Of Course Twice The Load Capacity And They Are Only $7 More. I'll Hang On To My 3 Ton Suv Jacks But If I Had It To Do Again I Would Spend The Extra $7 Order The 6 Ton. The 6 Ton Stands Are Also 10 Pounds Heavier. In Case Anyone Besides Me Was Wondering The Same Thing Here Is My Correspondence With Patricia ******** Itemno T43006 Your Product Description List These Jack Stands As 3 Ton Capacity. Is That 3 Ton Per Pair Or 3 Ton For A Single Jack Stand. ------------- Hi Yes This 3 Ton Jack Stands Are 3 Ton Per Pair! Thank You. Patricia Rodriguez Customer Service 4355 E Brickell Street Ontario Ca 91761 Ph. 909390-8588 Ext. 110 Ph. 888-448-6746 Ext. 105 Fax. 909-390-8618 ********

A. Nees, Warrington

You might like to see Powerzone 380036 3 Ton Steel Jack Stand - 1 Pair Auto Accessory 380036
  • Listed: Rated capacity: 3 Ton (6000 pounds)
  • Listed: Lift range: 11 inch to 16-1/2 inch
powerzone 380036 3 ton steel jack stand - 1 pair: milestone tools auto accessory powerzone steel jack stand is 3 ton and are made of heavy duty steel Powerzone 380036 3 Ton Steel Jack Stand - 1 Pair (Milestone
Or you might like to consider Single Medium Size Universal Slotted Rubber Jack Pad Frame Rail Protector Auto Accessory
  • Special: Designed to be sturdy enough to support your lift point while soft enough to preventing crushing the contact area
  • Special: Durable rubber construction, medium size for added cushion and venerability to fit different cars
single medium size universal slotted rubber jack pad frame rail protector: tmb motorsports auto accessory often times for vehicles too low or in an emergency Single Medium Size Universal Slotted Rubber Jack Pad Frame Rail Protector (Tmb

S. Shirley, Maine says

Very good

E. Wimbish, Norfolk

These are great. Having a family of 5 i have two suvs. Probably wont ever drive a car again. Used these to change the oil on my wifes truck. The car didnt move or wobble a centimeter. Will have to order a second pair so i can completely suspend the truck off the ground.

K. Hannah, Torbay says

Have A Hyundai Tucson And Didn't Need To Spend The Extra Money For The Suv Jack Stands When I Already Had The Regular Sized Ones. Serves Its Purpose Well But There Really Isn't Much Height Difference With The Regular Sized Ones. Save Some Money And Get The Regular Sized 3 Ton Jack From Torin If You Have A Smaller Suv. I Only Kept These Because I Decided To Go Ahead Have 4 Stands When Rotating My Tires

M. Widmer, Maine

I Bought These For My Car Instead Of The Car Jacks Because Of Some Of The Concerns In The Comments Surrounding The Quality Of The Welds. I Decided To Get Jacks Rated For More Weight To Help Counter This. Don't Get Me Wrong They Work Great. It's Just That Since They Are Designed For An Suv Sometimes It's Tough To Jack Up The Car High Enough To Slip These Under. It's My Fault. Overall They're Pretty Good. I Haven't Had Any Issues.

G. Alma, Wiltshire says

Welds Were Not Good. Tried A Reorder And Same Thing. Welds Didn't Look Like They Really Joined The Metals And I Could See This Area Rusting In No Time. Of The 4 I Had One With Good Welds And I Took Pictures Of Both.

J. Shayna, British Columbia

These Jack Stands Are Pure Junk. I Own A 1995 Seville Sls That Weighs Less Than 4200 Ibs. These Stands Were Supporting The Rear End Of The Vehicle (it Is A Front Wheel Drive With The Engine And Transmission In The Front Of The Car) And The Car Collapsed. It's A Miracle I Wasn't Under The Car At The Time. The Metal Used To Make These Jacks Stands Is Inferior. Do Not Buy This Product

D. Evelyn, Wyoming says

Bought These For Light Duty Work On My Jeep Wrangler. They Seem To Hold The Weight Fine But I Did Have One Of The Auto Lock Mechanisms Fail After The 3rd Use. I Now Have To Manually Get The Stand To Catch Before Putting It Under The Jeep. They Work For What I Need (keep The Jeep Up While Tires Are Off) But I Won't Be Crawling Under The Vehicle With These No Way. They're $35 Jack Stands So You Get What You Pay For. I'm Ordering A Pair Of 6 Ton Double Locking Stands And Hoping For A More Confidence Inspiring Jack Stand Before I Attempt A Suspension Install.

M. Bullock, Gloucestershire

My truck is a stock suspension 1998 4x4 ford ranger. The first thing that surprised me was the light weight of the suv stands, nonetheless it does the job on my ranger. They seem well made and should hold any vehicle up to at least the size of a ford ranger. The light weight makes me sceptical about using them on anything larger. They're a must have if you work on your own vehicle and keep in mind they're 3 ton stands. If your vehicle is f150 or bigger, you probably should get heavier duty 6 ton stands to be safe. The stands work perfectly fine for ford ranger, i recommend them.

K. Diana, Idaho says

They work as expected, no issues

H. Angela, Kent

Functional but i bit too tall. I bought these to use it both on my suv and my sedan. Perfect for the suv and i did not have to use the extension but a bit too tall for the sedan. Specially since i need to use a low profile jack for the sedan. I had to jack up the sedan really high. I recommend a shorter set where the extension can be used for the suv and the lowest point for a sedan.

X. Hakala, Kansas says

I just bought these for stabilizing my 18' hybrid travel trailer. Two fore, two aft. . Using these with ernst manufacturing 964-yellow jack stand covers, set of 4 and i didn't worry about any scratching of my frame or the jacks. Using these on wood blocks, my trailer didn't budge. Even on a rainy day when all my daughters cousins hung out there.

C. Joanne, Havering

My Truck Is A Stock Suspension 1998 4x4 Ford Ranger. The First Thing That Surprised Me Was The Light Weight Of The Suv Stands Nonetheless It Does The Job On My Ranger. They Seem Well Made And Should Hold Any Vehicle Up To At Least The Size Of A Ford Ranger. The Light Weight Makes Me Sceptical About Using Them On Anything Larger. They're A Must Have If You Work On Your Own Vehicle And Keep In Mind They're 3 Ton Stands. If Your Vehicle Is F150 Or Bigger You Probably Should Get Heavier Duty 6 Ton Stands To Be Safe. The Stands Work Perfectly Fine For Ford Ranger I Recommend Them.

Leave a Reply

You must be logged in to post a comment.

Top torin t43006 suv jack stands Review Content

Related Products

Product Image Gallery