Tricam Sle 1 Extender 350 Pound Capacity (Home Organizers And Storage) 2668

Review for in ez hitch mounted load extender

Price was $77.88. Best extender for your money. I bought this for kayaks so i didn't have to remove my toolbox from my truck everytime. First use i loaded up two kayaks 12' and 10'6 and it worked great! the connecting platform doesn't fit snug but it only wobbles a hair and isn't that bad. The center has a hole to run a strap through for better support, i couldn't be happier and now i've convinced my cousin to get one for his kayaks when we go.

-L. Jessica

2 In 1 E-z Hitch Mounted Load Extender, 350-pound Capacity, Black The Tricam Sle-1 2 In 1 E-z Hitch Mounted Load Extender Allows You To Transport Lumber, Drywall, Ladders, Kayaks And Much More By Quickly And Easily Extending Your Truck Bed Or Roof -Tricam Sle-1 2 In 1 E-z Hitch Mounted Load Extender, 350-pound Capacity, Black Finish

  1. Advantages: Constructed Of Heavy Duty 2-inch Tubular Powder-coated Steel.
  2. Advantages: Can Be Used Horizontally Or Vertically On Any 2-inch Hitch Receiver.

Half Price Tricam Sle 1 Extender 350 Pound Capacity (Home Organizers And Storage) Sle 1

Buy Now

Prologue

Very strong! only improvement i would make is to make the end that goes into hitch about 1" longer (yes, i know, that's what she said). It gets the job done. I recently had 9 each 2x12x16's and 2 each 2x10x16's and also a 4x6x8 treated on a 2013 tundra shortbed and the extender handled it like a champ. I actually had to put some additional weight on the tips of boards near the front of bed because they were lifting up, and consequently a lot of weight was on the extender and held strong! Best in ez hitch mounted load extender | Tricam-Home Organizers And Storage Review as-of ( Jul 2019 ) Advantages Tricam SLE-1 2 in 1 E-Z Hitch Mounted Load Extender, 350-Pound Capacity, Black Finish Hitch-mounted load extender for hauling oversized cargo. Constructed of heavy duty 2-inch tubular powder-coated steel. Can be used horizontally or vertically on any 2-inch hitch receiver. Features (5) adjustable heights, extends 51-inch from hitch48-inch wide load support (inside width). Comes with a 1-year limited warranty. Features (5) adjustable heights .

Tricam sle-1 2 in 1 e-z hitch mounted load extender, 350-pound capacity, black finish Review (sle 1)

From back of 6. 5 foot truck box to the end of the extender measured 11 feet. Hauled 35 2x6x14 boards with no problem. Plenty of the down pionts. -T. Rhonda

Tricam Sle 1 Extender 350 Pound Capacity

Rank
Tools & Home Improvement
Brand
Tricam
EAN
6391847450207
Product Dimensions
Height:14.75 inches
Length:50.75 inches
Weight:36.40 pounds
Width:2.38 inches
Manufacturer
Tricam
Model
SLE-1
MPN
SLE-1
Total-Items
1
Quantity
1
Part/Serial Number
SLE-1
Group-Order
Home Improvement
Category
HOME ORGANIZERS AND STORAGE
UPC
722571009106
Warranty
1-year Limited Warranty

2 in 1 e-z hitch mounted load extender, 350-pound capacity, black Home Improvement, The tricam sle-1 2 in 1 e-z hitch mounted load extender allows you to transport lumber, drywall, ladders, kayaks and much more by quickly and easily extending your truck bed or roof rack. constructed of heavy duty 2-inch tubular powder-coated steel that is rust resistant. the versatile design of the extender can be used horizontally or vertically on any 2-inch hitch receiver and features (5) adjustable heights. when not in use, the load extender breaks down into (2) pieces for convenient and compact storage. the sle-2 has a 350-pound capacity and measures 50. 75-inch (l) by 14. 75-inches (h) by 2. 375-inch (w) when set up as a t-support and measures 52. 75-inch (l) by 13. 125 (h) by 2-inch (w) when set up as a l-extension and weighs 32. 5-pounds. the tricam sle-1 2 in 1 e-z hitch mounted load extender comes with a 1-year limited warranty. tricam is a leading consumer products company who continues to lead the industry with innovative, patented designs throughout their entire product line. tricam's products include household step stools, lawn and garden carts, replacement tires and tire tubes. as shown in installation manual, long extended bar fits inside cross bar piece. Tricam Sle 1 Extender 350 Pound Capacity (SLE-1-Tricam).

Tricam Sle 1 Extender 350 Pound Capacity Home Improvement

in ez hitch mounted load extender Tricam SLE-1 2 in 1 E-Z Hitch Mounted Load Extender, 350-Pound Capacity, Black Finish (Switch to Mobile/Desktop Version)

Great idea and pretty cheap for what you get. I needed to cut off a couple of inches to work on my car as it was too tall but i expected that. Stores very compactly as the riser fits inside the crossbar. Haven't used it yet but it will come in handy for halling lumber. I also like that i can move some of the weight off the roof of my car and load the hitch with it.

Tricam Sle-1 2 In 1 E-z Hitch Mounted Load Extender, 350-pound Capacity, Black Finish
Click to see NoticeTricam Sle 1 Extender 350 Pound Capacity (Home Organizers And Storage)"Works as advertised. Definitely need hitch tightener. I added 1/8th thick foam on where the 2 pieces fit to kill the rattling. I might add another bolt for a secondary fail safe."


MICTUNING U-Bolt Hitch Tightener Heavy-Duty Stainless Steel Anti-Wobble Stabilizer Compatible All 1.25 2 Hitches

Why we need this hitch tightener? most of the vehicles install the flagpole, trailer box, racks from the tail may appear the situation like loose, wobbling or shaking. This product can solve these problems. It hold the hitch tightly and eliminates 90% of the wobble of the rack. This works great to remove the wiggling, banging and clanging of the rack behind the van. Compatible with almost all hitches compatible with all hitch brands, including thule, reese, saris, curt manufacturing, draw tite, rhode gear, graber, yakima, xport, curtis, masterbuilt, stowaway, valley, bauer, larin, roadmaster, blue ox, hidden hitch and u-haul, among others, and hitch classes i, ii, iii, and iv (1, 2, 3 and 4), both 2 and 1. 25 models, ideal for hitches on suv's, vans, trucks, rv's, sedans and trailers. How the hitch tightener works? it is really easy to install. Simply slip the u-bolt over the receiver, then slide the tightener plate into the bolt, and last tighten into place. Package included: 1 x u bolt 1 x tightener plate 2 x lock washers 2 x flat washers 4 x nuts

MICTUNING U-Bolt Hitch Tightener Heavy-Duty Stainless Steel Anti-Wobble Stabilizer Compatible All 1.25 2 HitchesMICTUNING-Heavy-Duty-Anti-Wobble-Stabilizer-Compatible

MICTUNING U-BOLT HITCH TIGHTENER HEAVY-DUTY STAINLESS STEEL ANTI-WOBBLE STABILIZER COMPATIBLE ALL 1.25 2 HITCHES Highlight
Brand :    mictuning
Size :    U-Bolt Hitch Tightener
Weight :    1.45 pounds
Model :    MIC-HT-082
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (mictuning product review) for MICTUNING U-Bolt Hitch Tightener Heavy-Duty Stainless Steel Anti-Wobble Stabilizer Compatible All 1.25 2 Hitches available as-of ( Jul 2019 )
Price :    $12.49
  • Durable material - designed by carbon steel tightener plate, high-strength stainless steel nuts, washers and u-bolt, rust-free. durable, strong and steady holding
  • Easy to install - quick install in minutes and keep the cargo carrier wiggle-free on long drive. simply slip the u-bolt over the receiver, then slide the tightener plate into the bolt, and last tighten into place. suitable for class i, ii, iii or iv (1, 2, 3 or 4) hitches that measure both 1. 25" and 2" hitches
  • Main function - the hitch tightener helps to prevent the excess movement, annoying rattle, noise, wobble for tow trailer ball mounts, bike racks, hitch racks, etc
  • Wide suitability - fit for a variety of tow with carry vehicles like truck, suv, sedan, rv, van, camper and minivan. can be used with standard ball tow hitch, hidden hitch, drop hitch, hitch extender, hitch adapters, weight distribution hitch, front hitches and more
  • Special bonus - comes with 2 extra nuts for backup use. we offer lifetime satisfied customer support and one-year warranty. this item is a must have for tow with carry vehicles

Hitch Tightener 1.25 2 Hitches RETECK 304 Stainless Steel Hitch Tightener Anti-Rattle Stabilizer Rust-Free Heavy Duty Lock Down Easy Installation Quiet

Reteck lifetime warranty! - reteck hitch tightener was designed to completely eliminate hitch noise, wobble, and rattle for tow trailer ball mounts, bike racks, hitch racks, etc - easily installs with class i, ii, iii or iv (1, 2, 3 or 4) hitches that measure either 1. 25" or 2" (will not work on a 2. 5" or larger hitch) - heavy duty 304 stainless steel / spring lock washers / flat washers. Black electrophoresis anticorrosive processing, it will never rust! - works with many hitches, ball mounts and racks from a wide variety of companies - compatible with a variety of tow/carry vehicles - truck, suv, sedan, rv, van, camper, and minivan. Can be used with standard ball tow hitch, hidden hitch, drop hitch, hitch extender, hitch adapters, weight distribution hitch, front hitches

Hitch Tightener 1.25 2 Hitches RETECK 304 Stainless Steel Hitch Tightener Anti-Rattle Stabilizer Rust-Free Heavy Duty Lock Down Easy Installation QuietTightener-RETECK-Anti-Rattle-Stabilizer-Installation

HITCH TIGHTENER 1.25 2 HITCHES RETECK 304 STAINLESS STEEL HITCH TIGHTENER ANTI-RATTLE STABILIZER RUST-FREE HEAVY DUTY LOCK DOWN EASY INSTALLATION QUIET Featured
Price :    $14.99 (was $19.99)
  • Lifetime warranty - quality guarantee from reteck
  • Compatible with a variety of tow/carry vehicles - truck, suv, sedan, rv, van, camper, and trailer. can be used with standard ball tow hitch, hidden hitch, drop hitch, hitch extender, hitch adapters, weight distribution hitch, front hitches
  • Package includes a heavy duty 304 stainless steel u-bolt and thick powder coated plate will never rust, spring lock washers and flat washers help to tightening it in place and secure. follow the picture to install it and also can be mounted from the bottom
  • Anti-rattle hitch tightener was designed to completely eliminate hitch noise, wobble, rattle and hitch movement for cargo carriers, hitch receiver, trailer ball mounts, bike racks, hitch racks, etc. enjoy your quiet towing experience
  • Great ideal for hitchs on trucks, suv's, vans, rv's and trailers. easily installs with class i, ii, iii or iv (1, 2, 3 or 4) hitches that measure either 1. 25" and 2" (will not work on 2. 5" or larger hitch)
Brand :    reteck
Color :    Stainless Steel
Size :    For 1.25" and 2"Hitches
Model :    Hitchtightener01
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (reteck product review) for Hitch Tightener 1.25 2 Hitches RETECK 304 Stainless Steel Hitch Tightener Anti-Rattle Stabilizer Rust-Free Heavy Duty Lock Down Easy Installation Quiet available as-of ( Jul 2019 )

Hitch Tightener 2 Inch 1.25 Inch Hitches, ABTW 304 Stainless Steel Hitch Tightener Quiet Anti-Rattle Stabilizer Rust Free Heavy Duty Lock Down Easy Installation

Our trailer hitch stabilizer can be used with a variety of trailers, shelves, truck, hook and ball rack used in conjunction. While our grip is not a conversion tool, it can solidify the connection when used. Please note: you will need a 3/4-inch deep socket or adjustable wrench to fully tighten the nuts when using the product.  re-tighten the nuts on your anti rattle hitch bracket after every use to get the strongest hold at all times (a necessary evil to balance the tightest hold with an ability to still remove the hitch tightener / hitch rattle stop). If you are worried that you will touch the area when you pull it into the area, you can turn the connecting fastener over.

Hitch Tightener 2 Inch 1.25 Inch Hitches, ABTW 304 Stainless Steel Hitch Tightener Quiet Anti-Rattle Stabilizer Rust Free Heavy Duty Lock Down Easy InstallationTightener-ABTW-Anti-Rattle-Stabilizer-Installation

HITCH TIGHTENER 2 INCH 1.25 INCH HITCHES, ABTW 304 STAINLESS STEEL HITCH TIGHTENER QUIET ANTI-RATTLE STABILIZER RUST FREE HEAVY DUTY LOCK DOWN EASY INSTALLATION Benefits
Brand :    abtw
Weight :    1.31 pounds
Model :    ABTW -CR001-01
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (abtw product review) for Hitch Tightener 2 Inch 1.25 Inch Hitches, ABTW 304 Stainless Steel Hitch Tightener Quiet Anti-Rattle Stabilizer Rust Free Heavy Duty Lock Down Easy Installation available as-of ( Jul 2019 )
Price :    $9.95 (was $22.99)
  • Hitch tightener prevents rattling, wobbling, rocking and hitch movement for cargo carriers, hitch racks, bike racks and trailer ball mount
  • Heavy duty 304 stainless steel / spring lock washers / flat washers. electrophoresis anticorrosive processing
  • Compatible with a variety of tow/carry vehicles -suv, sedan, rv, van, camper, and minivan. can be used with standard ball tow hitch, hidden hitch, drop hitch, hitch extender, hitch adapters, weight distribution hitch, front hitches
  • Easily installs with class i, ii, iii or iv (1, 2, 3 or 4) hitches by sliding the u-bolt over the stinger, sliding the tightener plate into the bolt, and tightening it in place with the included hardware
  • Satisfaction guarantee: at abtw auto, we create premium products, if you're not fully satisfied with your trailer hitch parts, you can return them with our 1-year money back guarantee.

ProGrip 900700 Cab Pad Roof Protector

Progrip by usa products has everything from heavy duty 4 inch weld on winches and straps to hard to find truck accessories.

ProGrip 900700 Cab Pad Roof ProtectorProGrip-900700-Cab-Roof-Protector

PROGRIP 900700 CAB PAD ROOF PROTECTOR Features
Brand :    progrip
Weight :    3.80 pounds
  • Molded black rubber
  • Roof protector
  • Suction cups mount cab pad to roof
  • Protect your paint
Price :    $20.95 (was $20.99)
Model :    900700
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (progrip product review) for ProGrip 900700 Cab Pad Roof Protector available as-of ( Jul 2019 )

Fu Len Holdings USA TCO00230 Bungee Flag, Red

An easy to install and remove safety bungee flag; simply wrap it, snap it and go! there is a wide industry usage for all safety load requirements. Hauling lumber or any extra long products from your truck bed, just bungee wrap it, snap it and go. Hauling your boat to the lake with the exposed blades on the motors? just bungee wrap it, snap it & go. Log haulers will find this so easy to wrap, snap & go with their load of logs. The bungee flag is a reusable safety load flag in a raptor weave attached to a 48" x 0. 315" connecting bungee cord. The all weather bungee flag is highly visible and features a heavy duty grommet located in the corner of the flag. The flag is attached to a high tenacity bungee securing device, double and bartack stitched in stress regions. It meets or exceeds local or federal dot (department of transportation) requirements. Lightweight, extremely durable, and easy-to-install and remove. Made with the contractor in mind.

Fu Len Holdings USA TCO00230 Bungee Flag, RedFu-Len-Holdings-USA-TCO00230

FU LEN HOLDINGS USA TCO00230 BUNGEE FLAG, RED Review
Brand :    fu len holdings usa
Color :    Fire-engine red
Weight :    0.36 pounds
  • Greener reusable product
  • Meets and or exceeds all dot regulations
  • Light weight and extremely durable as well as weather resistant
  • Double and bar tack stitched stress regions on the flag corners
  • High tenacity bungee securing device
Price :    $3.99 (was $4.88)
Model :    TCO00230
Quantity :    1
Order click here :    normally ships in 24 hours
Home Improvement :    Best Home Organizers And Storage (fu len holdings usa product review) for Fu Len Holdings USA TCO00230 Bungee Flag, Red available as-of ( Jul 2019 )

Keeper 04905 Bungee Safety Flag

Keeper's flag-it, bungee safety flag is a great way to identify over hanging loads. It is made of hi-visibility weatherproof mesh. It is 18" x 18" square and has a 36" bungee cord to wrap around a wide variety of shapes and sizes. The adjustable zip hook on the bungee cord makes for a perfect fit. It stores easily so it is always on hand.

Keeper 04905 Bungee Safety FlagKeeper-04905-Bungee-Safety-Flag

KEEPER 04905 BUNGEE SAFETY FLAG Highlight
Price :    $6.47 (was $10.62)
  • 18" x 18" hi-visibility weatherproof flag
  • Stores easily
  • Adjustable zip hook
  • Wraps around many shapes and sizes
  • 36" bungee cord
Brand :    keeper
Size :    1
Weight :    0.26 pounds
Model :    04905
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (keeper product review) for Keeper 04905 Bungee Safety Flag available as-of ( Jul 2019 )

StowAway Hitch Tightener, Anti-Rattle Stabilizer 2 Inch 1.25 Inch Hitches

The Hitch Tightener Really Does A Great Job And Stopping Most Of The Sway Of A Trailer Back Rack. Have A Kuat Bike Rack That Swayed Too Much And This Tightened It Right Up. Simple To Put On And Take Off. I Have This On A Car And The Bolt Ends Extend Closer To The Ground Than I Want But That Is A Simple Fix With A Hack Saw To Cut The Excess Threaded Bolt Hanging Down That Is Not Needed. Would Buy Again Or Recommend To A Friend.

The stowaway hitch tightener is a proven solution to prevent hitch movement whether it be for a bike rack, cargo rack, spare tire mount, trailer or pretty much anything else you re towing are carrying in your hitch. Our anti-wobble kit fits 2 and 1. 25 hitches and effectively prevents rattling, wobbling, rocking, and movement behind your vehicle caused by a common hitch connection. The stainless steel u-bolt and heavy-duty powder coated tightening plate are specifically designed to endure weather, heavy loads, and general wear-and-tear with a lifetime warranty. If you re looking for a product that is easy to install and will prevent hitch noise and wobble, the stowaway hitch tightener is a guaranteed quiet ride. Simply slide the sturdy u-bolt over the hitch bar, install the anti-rattle tightening plate and listen to that sweet sound of silence! it s as easy as that. The stowaway hitch tightener is a high-quality american made product for the hitch rack and trailering market.

StowAway Hitch Tightener, Anti-Rattle Stabilizer 2 Inch 1.25 Inch HitchesStowAway-Tightener-Anti-Rattle-Stabilizer-Hitches

Stowaway Hitch Tightener, Anti-rattle Stabilizer 2 Inch 1.25 Inch Hitches (020.6) FAQ.

The First Time I Used This Product I Must Have Overtightened The Nuts As The Threading On The Bolt Would Cause The Bolts To Seize When Turning By Hand. I Responded To The Sellers Automatic Email And A New U Bolt And Hardware Were In My Mailbox Within A Week -Notice from T. Juliana, Portsmouth

Click to Show stowaway hitch tightener, anti-rattle stabilizer 2 inch 1.25 inch hitches (020.6) Details

Still Wobbles A Tad But Solidified The Connection Quite A Bit. I Will Retighten In A Few Days And See If It Gets More Solid. But It Is Only A Few Inches Wide So I Don't Expect It To Stop All Wobbles. Slight Worry That Over Time The "sharp" Edge Of The Bent Lip Will Dig Into Hitch Tube Of Dirt Bike Carrier But Shouldn't Be Much Concern

Stowaway-hitch-tightener,-anti-rattle-stabilizer-2-inch-1.25-inch-hitches-(020.6) set picture

- G. CampbellWorks Perfectly!!! I Recently Purchased A Hitch Cargo Carrier. While It Was Really High-quality It's Still Slept Around In The Hitch With The Lock Pin Installed. So I Purchased This Great Stowaway Hitch Tightener. Instant Difference It's Night And Day. We Love It!i Would Highly Recommend To Anyone Else Interested In Removing The Rattle From Your Hitch!

I Have A 2016 Jeep Grand Cherokee Summit And The Plate Doesn't Fit Well On The Receiver. The Chain Holes Get In The Way Of The Angled Metal And It Doesn't Grab The Protrusion Around The Receiver Very Well. It Did Fit Better Rotated Upside Down But You're Fighting Gravity In That Direction. I Will Be Travelling With It Installed In The Proper Direction Tonight. I Feel It Will Slip Off The Receiver And I'll Have To Install Upside Down. I Did Have A Little Movement Even When Tightened. It Wasn't Much And A Lot Better Than Without It. There May Be Better Options For This Vehicle.

A. Ruff, Bournemouth

STOWAWAY HITCH TIGHTENER, ANTI-RATTLE STABILIZER 2 INCH 1.25 INCH HITCHES Advantage
Brand :    stowaway cargo carriers
Weight :    0.2 pounds
  • Manufactured in the usa with a lifetime warranty
  • Original anti-rattle hitch tightener design is proven to be one of the strongest and most effective on the market
  • Hitch tightener prevents rattling, wobbling, rocking and hitch movement for cargo carriers, hitch racks, bike racks and trailer ball mount brands such as thule, rola, yakima, inno, draw-tite, hidden hitch, reese and stowaway
  • Hitch tightener is compatible with all hitch brands, including curt, blue ox, hidden hitch and u-haul, among others, and hitch classes i, ii, iii, and iv (1, 2, 3 and 4), both 2" and 1. 25" models, ideal for hitches on suv's, vans, trucks, rv's, sedans and trailers.
  • Includes a heavy-duty stainless steel u-bolt and thick powder coated plate that will stand up to all weather conditions and loads. easy installation by sliding the u-bolt over the stinger, sliding the tightener plate into the bolt, and tightening it in place with the included hardware, can be mounted from the bottom if hitch ground clearance is low
Price :    $17.59
Model :    20.6
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (Automotive Parts And Accessories product review) for StowAway Hitch Tightener, Anti-Rattle Stabilizer 2 Inch 1.25 Inch Hitches available as-of ( Jul 2019 )

Darby Industries 968 Black Roof Turbo Rack

Darby industries black roof turbo rack is designed to carry canoes, kayaks and ladders while travelling long distances. It features a light weight construction with easy no drill installation and can be attached or removed with ease.

Darby Industries 968 Black Roof Turbo RackDarby-Industries-968-Black-Turbo

DARBY INDUSTRIES 968 BLACK ROOF TURBO RACK Benefit
Brand :    darby
Color :    Black
Weight :    0.6 pounds
  • Can be attached and removed easily
  • Designed to carry heavy weights. high density foam towers will not scratch roof
  • No drilling installation
  • Features a light weight construction
  • Assured high quality and dependability
Price :    $31.40 (was $49.00)
Model :    968
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (darby product review) for Darby Industries 968 Black Roof Turbo Rack available as-of ( Jul 2019 )

Hitch Tightener Anti-Rattle Stabilizer 2 3.75 Inch Hitches - Heavy-Duty Lock Down Tow Clamp, Rust Free

Prevents hitch wobble for hitch racks, bike racks and trailer ball mounts easy installation - fits 2 and 3. 75 hitches stainless u-bolt and powder coated plate will work with most hitch racks, hitch boxes and trailer ball mounts if you ve ever towed a car, truck or boat or used a hitch-mounted carrying rack, you re probably familiar with the wobbling, rocking, banging, clanking and jerking that can come from sloppy ill-fitting receivers and uneven loading our hitch tightener, which works for class i, ii, iii or iv 1, 2, 3 or 4 hitches that measure either 2 or 3. 75 will easily solve your problems easy-to-install, our hitch tightener works with a wide variety of trailers, racks, carriers, hitches, and ball mounts though our hitch tightener is not a conversion tool, it can be used to solidify the connection made when using one if you are worried about bottoming out when pulling into certain areas, you can flip the hitch tightener over please note you will need a 3 4 deep socket or adjustable wrench to fully tighten the nuts when using the product re-tighten the nuts after every use to get the strongest hold at all times a necessary evil to balance the tightest hold with an ability to still remove the hitch tightener proudly made in last and packaged and handled with care designed in los angeles, ca prevents the hitch wobble for your hitch mounted bike rack, cargo rack or trailer ball mount stainless u bolt and plate is ideal for all loads

Hitch Tightener Anti-Rattle Stabilizer 2 3.75 Inch Hitches - Heavy-Duty Lock Down Tow Clamp, Rust FreeHitch-Tightener-Anti-Rattle-Stabilizer-Hitches

HITCH TIGHTENER ANTI-RATTLE STABILIZER 2 3.75 INCH HITCHES - HEAVY-DUTY LOCK DOWN TOW CLAMP, RUST FREE Advantages
Brand :    oxgord
Color :    Black
Model :    ARHT-001
Quantity :    10
Order click here :    normally ships in 24 hours
  • Clanking and jerking caused by sloppy ill fitting receivers and uneven loading providing a smooth and quiet towing
  • Perfect for a variety of trailers racks and carriers
  • Can be used with standard ball tow hitch hidden hitch drop hitch hitch extender hitch adapters weight distribution hitch front hitches
  • Works with many hitches
  • Powder coated heavy duty galvanized means it will never rust
Price :    $8.95 (was $9.95)
Automotive Parts And Accessories :    Best Auto Accessory (oxgord product review) for Hitch Tightener Anti-Rattle Stabilizer 2 3.75 Inch Hitches - Heavy-Duty Lock Down Tow Clamp, Rust Free available as-of ( Jul 2019 )

MaxxHaul 70070 Dual Hitch Extension - 4000 lbs. GTW Capacity

The maxxtow dual hitch extension converts a single receiver to two receivers and allows you to tow a trailer and still use your hitch mount bike rack, cargo carrier or other hitch mount accessories. All maxxtow ball mounts have a heavy duty black powder coat finish to resist rust and corrosion and are manufactured and tested to meet all current sae safety standards.

MaxxHaul 70070 Dual Hitch Extension - 4000 lbs. GTW CapacityMaxxHaul-70070-Dual-Hitch-Extension

MAXXHAUL 70070 DUAL HITCH EXTENSION - 4000 LBS. GTW CAPACITY Advantages
Price :    $34.61
  • Note: top receiver for accessories only
  • Maximum tongue weight: 400 pounds
  • Maximum gross trailer weight: 4000 pounds
  • Receiver size: 2 inch
  • Note: top receiver not for towing
Brand :    maxxhaul
Model :    70070
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (maxxhaul product review) for MaxxHaul 70070 Dual Hitch Extension - 4000 lbs. GTW Capacity available as-of ( Jul 2019 )

tricam sle-1 2 in 1 e-z hitch mounted load extender, 350-pound capacity, black finish Price : 77.88, was : 77.88 as 2017-12-10
USUKDEFRESITJPCNCAGlobal
United States
Great Britain
German
France
Spain
Italy
Japan
China
Canada
World Wide
Tricam Sle 1 Extender 350 Pound Capacity (Home Organizers And Storage) Reviewed by on jerdus.com

Top tricam sle 1 extender 350 pound capacity (home organizers and storage) Content

The F.A.Q. for tricam sle-1 2 in 1 e-z hitch mounted load extender, 350-pound capacity, black finish

Arrived as expected. Heavier then what i was expecting. It seems well made. This unit is advertised as extending up from the hitch for over the cab halling, but it can also be used to extend the bed length as well just by reversing where the upper part connects. The upper part will also come off and slide over extension shaft for easy storing.

A number of questions have been asked here.

Q&A

(0) Question: what is the width of the horizontal t-bar? i need to carry (2) kayaks on this.


(1) Question: can this extender be set up to carry a 10ft long kayack inside a honda crv 2013 with the rear door partially open ?


(2) Question: is this too tall for a hitch on an elantra gt to hold the back of a kayak? minimum height?


(3) Question: will this work on a 2011 gmc terrain, need to extend my roof rack


(4) Question: would there be any problems in cutting this down and re-drilling a new hole?


(5) Question: is the 2in square tube that feeds into the hitch hollow? i intend to place an anit rattle screw/bolt in it



(note) Question: where/how to get Tricam (manufacturer's brand) accessories & similiar Tricam's products

Answer:

https://jerdus.com/tricam-sle-1-extender-350-pound-capacity-26680hdl2dx6/

Click the marked text to copy link to Clipboard

It works as it should but i welded a brace on the short end. It looked a bit weak and i didn't want it to break. It was just butt welded together and needed reinforcement. May have been perfectly fine but i'm not taking a chance of losing a canoe or kayak on the road. Other than that small thing, it is well made.


Automotive 18148651, Exterior Accessories 11575851, Hitch Accessories 19273751, Hitch Plugs 11373751, Towing Products & Winches 15273751Top Tricam Sle 1 Extender 350 Pound Capacity (Home Organizers And Storage) FAQ Content

Best tricam sle 1 extender 350 pound capacity (home organizers and storage) in review

This is perfect, i use it to carry my 20ft crew rowing boat on the top of my jeep wrangler, i couldn't carry it otherwise. I just added a swim nuddle to the bar to keep from scratching my boat. Perfect product and great price

U. Lewis, Hawaii

You might like to see Powerbuilt heavy duty 4000 lb triple lift 2 ton capacity, power built triple lift auto, motorcycle & atv jack, easily lifts cars, trucks, atvs & motorcycles, works for removing & replacing vehicle transmissions & differentials -powerbuilt 620422e heavy duty 4000 lb triple lift jack
  • Highlight: This Are Easy To Use.
  • Highlight: This Is Manufactured In China.
Economical Powerbuilt 620422e Heavy Duty 4000 Lb Triple Lift Jack (Auto Accessory) 620422e Powerbuilt 620422e Heavy Duty 4000 Lb Triple Lift Jack
Or you might like to consider Jack stand covers, set 4, your jack stands may be missing an important piece. help protect your car ernst jack stand covers. using jack stands has always risked scratching your frame, marring powder coatings -ernst manufacturing jack stand covers, set 4, yellow
  • Bonus: Protects Your Vehicle From Scratches.
  • Bonus: Made Of High-compression Rubberized Material.
Inexpensive Ernst Manufacturing Jack Stand Covers, Set 4, Yellow (Tools) 964 Yellow Ernst Manufacturing Jack Stand Covers, Set 4, Yellow (964

Q. Reed, Merton says

This unit works well and stores well. It also looks good in place. It does not rattle much at all. I use it for canoe transport. That said, i am not pleased that it shows rust on the ends of each piece after three months when i have been storing it inside the garage.

G. Colleen, Illinois

Heavy duty. Works as advertised. Recommend hitch tighteners (1 for each sleeve). Otherwise it will rock and sway. Also recommend locking hitch pins so "they" don't steal it. Or you can take it apart and stow in cab, but the hitch tighteners require wrenches and more time.

H. Edna, Nord-Pas-de-Calais says

I purchased this device to use off my head ache bar. It is a great device, saved me about $300 for a rear ladder mount. . The pro's:. Great price. Looks great. Strong. Cons:. Yes, sloppy in the receiver. . I would buy this again if i had too

D. Walsh, Newfoundland and Labrador

Super idea. Up high to carry ladder or my kayak on top of car. Added an 18" extender so i could still access truck bed. Super for quick trips in the low position. Kayak or wood materials hauled. Super for anyone with a 5' 0r 6' truck bed.

X. Gladys, East Sussex says

I liked it a lot, would love it if it fit a little more snug so it didn't sway and rattle so darn much. You will need to buy a stowaway hitch tightener, anti-rattle stabilizer for about another $15 on online store u can get 2 of them.  2) hitch tightener brackets anti wobble cargo carrier rack 1. 25" 2" no rattle. . I like that it has reflection tape and several strap holes and adjustment holes and how versatile and economically priced but it is heavy and loose in the receiver.

Y. Alba, Portsmouth

Purchased to use for transporting my hobie kayak to my toyota 4runner and has worked out nicely. The rack is built well with nice welds and pins to secure the proper height/length needed. Plan to get a pick up truck soon and see where using in the low position it will come in handy for transporting the kayak while in the bed of the truck.

R. Garner, Birmingham says

This is a great gadget to allow you to carry long items (lumber, pipes, etc. ) on your vehicle and will keep your vehicle from getting scratched. It fits in a standard 2" x 2" trailer hitch receiver. Nothing to assemble, other than selecting the height you desire (there are a few adjustments available). It is not flimsy so it does weigh a substantial amount - about 36 pounds.

N. Veronica, Rochdale

I've given this unit 4 stars only because i added a "hitch tightener" to the system. A hitch tightener is what the seller should have included with the product as this additional device is abolultely necessary to safe and stable operation of the unit. Without the hitch tightener, i would give the unit just two stars. . At first, i was disappointed in this product for the following reasons; (1) the unit fit very loosely into the receiver on my pick up and even when the unit is secured with ratchet type load straps, it wobbles badly and is very unstable. (2) unless you are willing to buy an "anti-rattle/wobble" device for an additional $24. 00, you won't be happy with the way this unit fits into your vehicle hitch receiver. (3) so, i strongly suggest that you spend the money and purchase a hitch tightener that is sold by online store. You won't be disappointed with that choice. . (4) the unit does not fit deeply enough into the receiver, causing vertical and lateral instability and safety issues. To help make this unit fit more solidly in the receiver, i drilled an additional "pin" hole in the part of the unit that fits into the receiver of my vehicle. The method i sued to determine the location of the hold was to push the part of the unit that fits into the receiver into the receiver until i could feel the unit become "flush" with the back of the receiver. This modification allowed the unit to fit an additional 4 inches into the receiver thus making it more stable and safe. . This modification along with the hitch tightener is all you'll need to do to make this unit perform perfectly.

S. Newell, Brighton and Hove says

Well built. easy to use and adjust the height.

B. Sally, Swindon

Box was a little beat up, but equipment was intact. Load extender very easy to use, and it appears to be sturdy. Just what i was looking for when picking up extended lengths of trim and framing lumber.

Z. Guest, Vermont says

Affordable and low quality as a result, but i used the advice from another reviewer and this product works great. The main problem is that it doesn't fit tight into the receiver, so you have to use a hitch tightener or else it will wobble like crazy. Also, if you want to mount it vertically, you need to drill another hole in the short end of the "l" so it slides further into the receiver. Te hole size that you need to dill is 5/8 inch

Q. Shirley, Bourgogne

This product is being used on a 2016 hyundai santa fe 7 passenger model. Very easy to install, however, it's a bit on the high side even in the lowest position. Pretty durable construction and will work great for years to come.



Leave a Reply

You must be logged in to post a comment.


Top in ez hitch mounted load extender Review Content

Related Products

Product Image Gallery

Top-tricam-sle-1-extender-350-pound-capacity-26680hdl2dx6-Content