A Replacement Rope For Plowing With Your ATV. Save Your Wire Rope From The Wear And Tear Of Plow Season. Designed To Handles Repeated Sharp Angle Pulls. An 8 Feet Long Strong Synthetic Rope Add-on WARN 68560 Synthetic Plow Lift Rope.
Automotive Warn 68560 Synthetic Plow Lift Rope 68560 Top Rated Automotive Parts And Accessories 182682954847 Warn, Warn 68560 Synthetic Plow Lift Rope 7262318424050. save your wire rope from wear and tear during plow season and temporarily replace it with a strong and durable synthetic rope. measuring 8 feet in length it stands up to the repeated sharp angle pulls of lifting a plow blade. Warn 68560 Synthetic Plow Lift Rope Auto Part 68560.
Good rope and easy to install. Price steep for a piece of rope though. We'll see how well it holds up after the snow flies.
warn-68560-synthetic-plow-liftClick to see NoticeWarn 68560 Synthetic Plow Lift Rope (Auto Part)"I bought this because my steel cable broke while plowing the furthest end of my driveway, and it was a pain to drag the plow back to the garage. I wasn't completely sold on a synthetic rope for heavy use with a plow, but after one season, it held up great, didn't stretch or break, so i am happy. Easy to install on quad, and hopefully it lasts me a couple more seasons."
This Heavy-duty Angled Plow Blade Is Curved And Tapered To Move Dirt Or Snow Up And Away From The Clearing Surface. It's Made Of 11-gauge Steel Backed By Sturdy Ribbing And Comes In A Yellow Powder Coated Finish With A Replaceable Steel Wear Bar And Skid Plates. The Length Is 60-in.
Best Auto Part (warn) reviews for WARN 68200 ATV Cyclone Angled Plow Blade available as-of ( Aug 2019 )
Curved and tapered blade to move dirt or snow up and away from clearing surfaceBlade has durable yellow powder coated finishLength measures 60-inIncludes replaceable steel wear bar and zinc finished skid platesMade of 11-gauge steel backed by ribbing
Warn 62100 ATV Plow Base Kit
As Part Of Your Atv Plow Assembly Plow Base/tube Will Reduce Wear And Tear On Your Plow Blade With Oversize Bushing. It Comes In A Black Powder Coat Finish And Fits All Warn Atv Plow Blades And Mounting Systems.
Best Auto Part (warn) reviews for Warn 62100 ATV Plow Base Kit available as-of ( Aug 2019 )
Reduces wear and tear on plow blade with oversize bushingFits all Warn ATV plow blades and mounting systemsBlack powder coat finish
WARN 67679 AV Plow Blade Marker
Use The Warn Plow Bladed Marker For Increased Visibility Especially In Deep Snow The Plow Blade Marker Clearly Defines The Plow Blade's Edge. Our Atv Plow Markers Are Two Feet High Antenna That Have Red Rubber Tips For Visibility. Quick And Easy Attachment By Way Of A Bolt On Mounting For A Secure Fit.
Good Quality. I'm Using Them On My Low Trailer To Give Me A Visual Marker So I Can Back Up Without Lowering My Truck's Tailgate To See The Trailer.
Review from P. Anonymous, South Australia
Review from T. Hadley, Victoria
These Markers Fit My Warn Provantage 50" Plow Perfectly With No Modification Needed. They Have Not Been Used Yet But I Expect They Will Hold Up Just Fine.
I Bought These Plow Markers For My Warn Snow Plow As They Were Made For My Plow And Mounted Right On. They Do The Job. They Cost A Little More Then Some Others But To Have The Ones Made For The Plow Is Worth The Little Extra.
Works As Designed Easily Attached To Plow With Minimal Effort. Instructions State To Drill But Plow Did Not Need It. Installed On Warn Plowvantage 60" Plow. A Bit Overpriced For Coated Spring Wire.
Best Auto Part (Automotive Parts And Accessories) reviews for WARN 67679 AV Plow Blade Marker available as-of ( Aug 2019 )
Red-rubber tipIncreases visibility of the plow blade's edge2 ft tall antennaBolts on easily
Warn 67650 ATV Plow Electric Actuator
The Plow Actuator Is Designed To Lift Your Plow Without Manual Effort And Has Enough Power To Lift Heavy Blades So The Winch Can Concentrate On Pulling. It Operates Only When The Ignition Is On And Comes Standard With A Thermal Limiting Switch. The Pulling Capacity Is 3000-lbs And Does Not Need A Pulley Bracket. The Electric Actuator Kit Fits All Warn Plows And Includes Cable Termination Strap Handlebar Switch Wiring Harness And Hardware.
Best Auto Part (warn) reviews for Warn 67650 ATV Plow Electric Actuator available as-of ( Aug 2019 )
Operates only when ignition is on and comes with standard thermal limiting switchDoes NOT need a pulley bracketHas 3,000-lb pulling capacityDesigned to lift plow blade without manual effort and leaves winch to concentrate on pullingKit includes cable termination strap, handlebar switch, wiring harness, and hardware
WARN 67870 ATV Plow Blade Control Flap
The Atv Plow Blade Control Flap Is Great For Snow Plowing It Controls Snow Kickback Keeping The Snow On The Ground And Out Of Your Face. Made Of A Flexible Black Rubber And Will Work With All Warn Atv Plow Blades. Length Is 60 Inches And Can Be Cut To Size For The 54 Inch Plow Blade As Well It Will Not However Work With The 50 Inch.
Best Auto Part (Automotive Parts And Accessories) reviews for WARN 67870 ATV Plow Blade Control Flap available as-of ( Aug 2019 )
Made of flexible black rubber60 inches in length can be cut down to the 54 inchesKeeps snow kick-back out of your face
WARN 67679 AV Plow Blade Marker
Use The Warn Plow Bladed Marker For Increased Visibility Especially In Deep Snow The Plow Blade Marker Clearly Defines The Plow Blade's Edge. Our Atv Plow Markers Are Two Feet High Antenna That Have Red Rubber Tips For Visibility. Quick And Easy Attachment By Way Of A Bolt On Mounting For A Secure Fit.
Needed To Be Able To See The Plow Edges At Night And The Wife Maybe Won't Run Over It As Easy With These Sticking Up Above Her Hood. Lol The Only Thing I Did Not Like About Them Is Why Would Warn Not Make The Hole They Mount In The Same Size As The Threads You Will Need To Drill The Hole In The Top Of The Plow Out For These To Fit.
Review from K. Helen, Tennessee
Review from Q. Shirley, Yukon Territory
Direct Replacement For My Broken Markers. Perfect Fit. I'm Sure I'll Break These Off Eventually. Well Maybe Not Now That I'm Not Plowing Snow In Michigan's U. P. ! They May Just Last Forever. :)
Good Quality. I'm Using Them On My Low Trailer To Give Me A Visual Marker So I Can Back Up Without Lowering My Truck's Tailgate To See The Trailer.
These Were Half The Price Of Oem And They Fit Look And Feel Like Oem Product. No Problems Fitting Into Warn Plow. Look And Do The Job Of The Same Stuff From The Other Guys! Save Some Money And Buy The After Market You Won't Be Dissapointed.
Best Auto Part (Automotive Parts And Accessories) reviews for WARN 67679 AV Plow Blade Marker available as-of ( Aug 2019 )
Bolts on easily2 ft tall antennaIncreases visibility of the plow blade's edgeRed-rubber tip
WARN 69373 Plow Roller Fairlead
The Warn Plow Roller Fairlead For Plow Lifting Is Designed For Use With Winches That Raise And Lower The Atv Plow Blade. Larger Diameter Lower Roller Reduces Wear On Wire Rope. Compatible With Warn Atv Winches That Are Rated For 1500 Lb. 2500lb And 3000 Lb. If You Have A 4000 Lb. Capacity Utv Winch Try Warn 82550 Roller Fairlead For Plow Lifting.
Best Auto Accessory (Automotive Parts And Accessories) reviews for WARN 69373 Plow Roller Fairlead available as-of ( Aug 2019 )
Use with winches that raise and lower the ATV plow bladeHelp save your synthetic or wire rope during plow seasonLarger diameter lower roller to reduces wear on wire ropeCompatible with WARN PowerSport winches up to 3,000 lb capacity
KFI Products 105270 Fairlead Plow Pulley Cable
Replaces Standard Winch Fairlead During Plow Season. Provides Larger 2-1/8in. Diameter Roller For Smoother Cable Movement When Plowing Compared To Standard 7/8in. Rollers. Roller Has A Curved Cable Groove To Help Eliminate Cable Flattening That Leads To Snapped Cables During The Plowing Season. Eliminates Potential Cable Kink Due To Small Roller Contact And Abrupt Angle Rolls. Multiple Roller Positions For Different Applications And Cable Angles. For Steel Cable Use Only. Standard 4. 875in. Bolt Pattern
KFI-Products-105270-Fairlead-Pulley
KFI PRODUCTS 105270 FAIRLEAD PLOW PULLEY CABLE Featured
Best Auto Accessory (kfi products) reviews for KFI Products 105270 Fairlead Plow Pulley Cable available as-of ( Aug 2019 )
Eliminates potential cable kink due to small roller contact and abrupt angle rolls.Provides larger 2-1/8in. diameter roller for smoother cable movement when plowing compared to standard 7/8in. rollers.Roller has a curved cable groove to help eliminate cable flattening that leads to snapped cables during the plowing season.Multiple roller positions for different applications and cable angles.Replaces standard winch fairlead during plow season.
WARN 84526 ProVantage ATV Plow Pulley
Provantage Plow Pulley Provides Better Control Of Plow Blade By Doubling The Lifting Advantage Slowing Blade Movement And Repositioning The Lift Point. It Helps Contributes To Longer Rope Life By Reducing Load And Bend Over Angle. Will Not Work With The Power Pivot Or A Power Lift.
This Was Very Easy To Install And Works As Advertised. I Had The Winch Cable Going Straight To The Plow Base And After Installing This It Took A Lot Of Pressure Off My Winch And Raises The Blade Higher.
Review from H. Lindsey, Northumberland
Review from M. Rochelle, Niedersachsen
Absolutely Needed In Place Of The Supplied Pulley Which Breaks After The First Use. This Much Better For Low Stress And Greater Control Up And Down. Easy To Install!
This Kit Works Really Well With Out The Kit The 3000 Lb. Wench Moves The Plow Up And Down Too Fast And Jerks The Front Of The Atv Too Much. With The Kit Its More Smooth And Controllable And Less Strain On The Cable.
This Add On Component Does Improve Plow Height Control Seems To Be Less Strain On The Winch And Preserves The Synthetic Rope. I Have About 20 Hours Of Plow Time On It. The Straps Broke Once (due To Operator Error) But I'm Happy They Were The Weakest Link. I Had Plenty Of Spare Webbing Lying Around To Tie Up Replacements. The Incident Showed Rest Of Components Are Very Strong. Mounting Installation Is Hampered By The Wrong Length Of Bolt That Is Supplied With Brackets In The Kit. I Need To Hacksaw To Shorter So It Would Fit Against Existing Hardware On My Warn 48" Plow Blade.
Best Auto Accessory (Automotive Parts And Accessories) reviews for WARN 84526 ProVantage ATV Plow Pulley available as-of ( Aug 2019 )
Doubles the lifting advantage and slowing blade movementPulley provides better control of plow bladeContributes to longer rope lifeReducing load and bend over angleWill not work with the Power Pivot or a Power Lift
The Warn Plow Base Assembly Features An Extra Wide Design For Increased Stability And Durability A Forward Trip System And An Interlocked Rotating Base Plate For Great Strength Outstanding Durability And Excellent Impact Resistance. For Use With The Warn Provantage Plow System With A Front Mounting Kit Only.
Finding The Right Parts Can Be Pretty Confusing So Allow Me To Explain The Provantage System. The Entire Plow Consists Of Four Parts: 1. Vehicle-specific Mount Kit (one Of Many Part Numbers. Check . To Find The One For Your Particular Vehicle. ) 2. Push Tube Assembly (p/n 92100 Or 78100; Depending On Which Type Of Mounting Kit You Use) 3. A Plow Blade (p/n 78950 78954 78960 80954 Or 80960; Two Different Styles (straight Blade And Tapered) Three Different Widths (50" 54" 60") 4. Lift (usually A Winch W/ Roller Fairlead. Alternatively Warn P/n 84600 Is A Dedicated Lifter) For 1 And 2 There Are Two Basic Types: Center Mount And Front Mount. Most Vehicles Have A Center-mount Kit Available Many Have A Front-mount Kit. If You Have The Front-mount Kit Available I Would Recommend It As It Allows The Plow To Lift Higher. I've Found That It Lifts High Enough That I Can Reach Over The Front Rack And Turn The Plow Without Leaving My Atv. *** If You Select A Front Mount Kit You Need To Select The Front-mount Push Tube Assembly P/n 92100 *** If You Select A Center Mount Kit You Need To Select The Center-mount Push Tube Assembly P/n 78100 3 Is Self Explanatory Select From One Of 5 Blade Options. 4 If You're Buying And Installing A Winch Along With The Rest Of The Components Make Sure You Read The Instructions For The Front Mount. On Mine Parts Of The Front Mount Kit Replace A Couple Components On The Winch Mount Kit So Right After You Finish Installing The Winch Mount You've Got To Take It Apart To Install The Plow Mount. Because Of This I Strongly Recommend Buying A Warn Winch Mount Regardless Of What Winch You Put In It. Warn Winch Mounts Should Be Compatible With Warn Plow Mounts. Any Decent Roller Fairlead Will Work. Do Not Use A Hawse-style Fairlead. In Addition To Their Regular Fairleads (which Will Work Acceptably) Warn Sells A Roller Fairlead Specifically Designed For Plowing P/n 69373. This Fairlead Has A Very Large Bottom Roller To Reduce The Tightness Of The Bend And Extend Winch Cable Life. Warn Also Sells A 8' Synthetic Plow Lift Rope (p/n 68560) To Save Wear And Tear On Your Regular Winch Cable. I Recommend A Fast Winch - You'll Be Raising And Lowering Dozens Of Times While Plowing. Make Sure You Mount Your Winch Control In A Convenient Location - You Don't Want To Have To Reach For It Each Time. There Are A Few Useful Options Available: 1. Power Pivot (p/n 79360) - Electric Motor Rotates The Plow Blade. If You're Doing A Lot Of Plowing This Might Be Useful. 2. Bucket Loader Conversion (p/n 83133 84133 Or 85133 Depending On Blade Width) - Converts A Regular Plow Blade Into A Bucket Loader For Handling Loose Material (sand Gravel Topsoil Mulch Etc. ) There Are A Few Hangups You'll Have In Certain Situations. For Instance If You Want To Use An Assembled Plow On Two Different Model Atvs It May Or May Not Work. The Vehicle-specific Mounting Kit Contains Two "tabs" That Bolt On To The Push Tube And Allow It To Quickly Attach To The Mount. The Tabs For One Model May Or May Not Be The Same Height Or Spacing As Tabs For Another Model. If You're Trying To Have Two Plows For One Atv (one Regular Plow And One With The "bucket" Conversion) You'll Be Missing A Set Of The Aforementioned "tabs" For The Second Plow And You'll Need To Contact Warn To Obtain A Second Set. They've Been Sending Them Out For Free But Contact Them First To Confirm. Once You've Got All The Correct Parts Assembly Should Be Fairly Straightforward. Unfortunately You'll Be Reading From 3-5 Different Assembly Manuals Simultaneously One For Each Of The Parts You Purchased So It Can Be A Little Confusing. This Is My Only Real Gripe With The Whole Kit So Far.
Review from V. Dorine, Darlington
Review from P. Theola, Hawaii
I Love The Front-mount Plow System- It Just Makes Life So Much Easier When You Have To Attach Or Remove The Plow. I Have Had This Set Up On 2 Of My Machines Now And I Would Recommend It To Everyone Who Uses Their Atv Or Sxs To Plow. I Simply Pull The 2 Pins And Flip The Entire Plow And Push Tube Assembly Onto A Furniture Dolly For Easy Transport. When It's Time To Reattach The Plow It Easily Slides Right Back Into The Mounting Bracket. Put The 2 Pins Back In Hook Up With Winch To The Push Tube Ad You're Good To Go Again! This System Is Far Easier Than The Mid-mount Style Where You Have To Get Under The Atv To Attach The Push Tube. Plus With This System You Don't Lose Any Ground Clearance Nor Do You Have To Worry About Bending/breaking The Mounting Tabs Understate The Machine If You Bounce Off A Rock While Riding. This System Is Just Genius!
This Is The Assembly That You Attach With Quick-disconnect Steel Pins To The Atv-specific Front-mount Kit. (the Pins Are Included Either With This Assembly Or With The Front-mount Kit. ) The Warn Plow Blade Of Your Choice Must Be Bolted To This Push Tube Assembly. The Front-mount Kit Is The Only One Of The Three Pieces That Is Designed Differently For Different Atv Models. A Front Mount Allows The Plow Blade To Raise Higher Than A Mid-mount System. And Because The Quick-disconnect Pins Are Forward It's Unnecessary To Crawl Under The Atv To Remove And Re-attach The Plow For Trail Riding. Also Warn's Front Mount Does Not Reduce Ground Clearance. But For Me The Deciding Factor In Choosing A Front-mount System Over A Mid-mount Was The Shorter Push Tubes. Basic Physics Tells Me That A Shorter Tube Will Withstand A Greater Impact Without Buckling Than A Longer One Other Factors Being Nearly Equal. The 5-position Angling Mechanism Is Surprisingly Easy To Use Even Though You Have To Dismount To Operate It. This Is Heavy Steel That Does The Job For Which It's Designed. The Included Bolts Nuts And Pins Are Of The Best Quality. 2014feb20(18:33)-sls
To Avoid Having To Disassemble Countless Parts And Hardware From The Bucket Conversion To Reinstall The Plow Blade I Decided To Get A Second Plow Blade And Push Tube. This Was Supposed To Make It Easy To Swap From Plow To Bucket Then Back To Plow Without Having To Assemble Anything. However After Getting The Second Plow Blade And Push Tube Assembly In The Mail I Find Out That Neither Of These Includes The "mounting Tabs" That Are Required To Mount The Push Tube Assembly To The Mounting Bracket On The Quad. I Called Gowarn To Order Just These Mounting Tabs But They Do Not Carry Them. Next I Called Warn But They Close At 4pm. For Now This Kit Gets 1 Star Because It Should Have Come With The Mounting Tabs Or At Least A Note Somewhere On How To Get Them Without Having To Order An Entire Mounting Kit (which I Already Own). Update: After Talking To Warn I Am Changing My Review To 4 Stars. They Really Have Good Customer Service.
Best Auto Accessory (warn) reviews for WARN 92100 ProVantage Plow Base/Push Tube Assembly available as-of ( Aug 2019 )
Forward trip system and an interlocked rotating base plateOutstanding durability with excellent impact resistanceAn extra wide design for increased stabilityUse on your ATV with a WARN ProVantage plow systems
KFI Products ATV-SCHS Winch Cable Hook Stopper
This Split Cable Hook Stopper Is For The Atv And Utv Winch. It Weighs 4 Oz. It Is 2 5/8 Inches Wide And 1 3/4 Inches Thick. This Kfi Split Cable Hook Stopper Will Fit Between The Two Outside Rollers On An Atv Or Utv Winch Fairlead. It Also Works Great With The Synthetic Rope And Or The Slot Fairlead. Reasons To Purchase A Split Cable Hook Stopper : Eliminates Wear And Tear On Your Rollers From The Hook. Eliminates Hook Clatter From Going Down The Trail. Protects The Winch Motor And Gears From Pulling The Cable In To Far And Bottoming Out On The Rollers. Keeps Tension On The Hook To Eliminate The Cable Becoming Loose. Looks Great. Once You Have One Everyone Else That You Ride With Will Want One. Installation: Note: Wear Leather Gloves. 1) Freespool Winch And Pull Out Approx. 2 Feet Of Cable. 2) Pull Hairpin And Release Clevis Pin From Winch Hook. 3) Remove The Four Bolts Fastening The Two Halves Of The Split Cable Hook Stopper Together. Place The Cable Or Rope Between The Two Halves. Insert The Four Bolts And Tighten. 4) Re-attach Hook To Cable End. 5) To Stow Hook Engage Clutch And Retract Cable Onto Winch Spool Until Hook Is Snug Against The Hook Stopper And Fairlead. 6) Position Hook Stopper At Approx. 3/4 Of The Total Line Distance Towards Hook While Using You Winch.
Never Used One Of These Before But So Far I Love It. Keeps Me From Having To Find A Place To Put The Hook So It's Not Flopping Around.
Review from Q. Julia, Connecticut
Review from G. Tracey, Tower Hamlets
The Atv Winch Cable Hook Stopper Arrived On Time Worked Exactly As Advertised And Fits The Fairlead On My Particular Winch As If It Were Made For It. Since The Stopper Is Two Halves Bolted Together You Can Easily And Quickly Attach It To The Winch Cable Without Removing And Replacing The Cable Hook Which In Itself Can Be A Project. This Coming Winter's Snow Plowing Will Give Me An Idea Of How Well The Stopper Holds Up.
Fast Delivery And Is As Described. I Recommend This To Any Winch Hook As This Product Will Greatly Help Against Having Your Wich Wire Or Rope Get Bound To Tight. Seller Is Also Very Responsive With Questions And Or Concerns.
Received Fairly Quickly Through The Mail. Easy To Install. There May Be A Few Things I Would Change For Ease Of Install. The Bolt Should Be A Phillips Head Bolt Or A Hex Head Bolt Not An Allen Head. It Was A Pain In The Butt Holding An Allen Key And A Socket On The Other End Other Than That Easy Install. I Found That Attaching The Socket For The Nut To My Cordless Impact Made The Tightening Process Much Quicker Then Ratcheting Away. I'll Revise My Review After Further Usage Of The Stopper. Installed On Warn 2500 Lb Winch On A 2015 Honda Rancher 4x4.
Best Auto Accessory (kfi products) reviews for KFI Products ATV-SCHS Winch Cable Hook Stopper available as-of ( Aug 2019 )
Eliminates wear and tear on your rollers from the hookKeeps tension on the hook to eliminate the cable becoming looseEliminates hook clatter from going down the trailProtects the winch motor and gears from pulling the cable in to far and bottoming out on the rollersOnce you have one, everyone else that you ride, with will want one
WARN 78954 ProVantage 54" Straight Plow Blade
The Warn Provantage Atv And Side X Side Plow Systems Have Been Designed From The Ground Up To Be The Most Versatile Durable And High-performance Plow System On The Market. It's Easy To Connect. It's Heavy-duty. It's Engineered To Perform. And With A Variety Of Useful Innovative Accessories It's The Most Complete Plow System Money Can Buy.
Heavy Duty Snow Busting Power. This Thing Is Huge And You May Need It For Where You Live. This Is The Second Warn Plow I Have Purchased One Stays At My Camp This One Will Be At My House. I Have Used The Warn Set Up For A Few Years Now And It Can't Get Much Easier To Use. The Only Thing You Need To Replace Is S***ty Plastic Piece That Winch Rope/cable Goes Through. I Have No Idea Why It Would Come With Plastic. But You Will Find Installation Very Simple The Blade And Mount Come With Directions The Push Tube Will Not. All Parts You Will Need Will Come With A Part Of The Kit (blade Push Tube Mount). Also Look At Warns Website To See If This Fits Your Quad. Online Store Says This Wont Fit My 2016 Polaris Sportsman. This Picture Says Otherwise. The One Thing I Would Recamend Is Getting Extra Lighting For The Plow Which The Top Of The Blade Is Already Pre-drilled So You Can Mount A Light Bar To. Anyways My Old Warn Kit Is A Few Years Old And Does Its Job Well I Will Continue To Buy As Long As Their Winches Quality Stays The Same.
Review from D. Lorenz, Waltham Forest
Review from R. Denise, Massachusetts
Nice Blade I Wanted The 54 Inch But It Did Not Come With Free Super Saver Shipping. The 50 Is Plenty Big For What I Am Plowing And The Installation Was Not A Problem. All Needed Hardware Came With The Plow And The Plow Push Tubes To Complete The Installation. If You Want A Sturdy Plow This Is A Very Good One.
I Needed A Plow For My Honda 2003 350 Rancher. Decided On The Warn After Many Hours Of Research. It's A 3 Part System All Purchased Seperately: 50" Blade -part 78950 I Also Purchased: 1) Mounting Plate -part 63290 2) Push Bar/plow Base -part 78100 I Am Very Satisfied With This Purchase. It's Easy To Use Works Great In The Snow And Various Yard Work Tasks. This Is A Quality Made Plow System But I Also Haven't Tried Any Other Type. Warn Is Know For Quality Products And Figured Go With My Past Experiences. Easy To Install With The Push Tube And Took Less Than 2 Hours And Mounted With My 350 Rancher. The Plow Blade Packaging Contained The Installation Instructions For The Push Tube. Install The Wear Bar For The Bottom Of The Blade First Like The Instructions Say. It Was Last Thing I Did And Took More Work Than When The Blade Is Unattached. It Is The Same Width As The Atv And The Right/left Pivoting Options Are Perfect For My S- Turning Driveway. Adjusting The Pitch Of The Blade Took Some Work With The Preload Of The Springs But That Was Expected And Once Adjusted To Your Needs It's Ready To Go. Great Price Too.
Finding The Right Parts Can Be Pretty Confusing So Allow Me To Explain The Provantage System. The Entire Plow Consists Of Four Parts: 1. Vehicle-specific Mount Kit (one Of Many Part Numbers. Check The Warn Website To Find The One For Your Particular Vehicle. ) 2. Push Tube Assembly (p/n 92100 Or 78100; Depending On Which Type Of Mounting Kit You Use) 3. A Plow Blade (p/n 78950 78954 78960 80954 Or 80960; Two Different Styles (straight Blade And Tapered) Three Different Widths (50" 54" 60") 4. Lift (usually A Winch W/ Roller Fairlead. Alternatively Warn P/n 84600 Is A Dedicated Lifter) For 1 And 2 There Are Two Basic Types: Center Mount And Front Mount. Most Vehicles Have A Center-mount Kit Available Many Have A Front-mount Kit. If You Have The Front-mount Kit Available I Would Recommend It As It Allows The Plow To Lift Higher. I've Found That It Lifts High Enough That I Can Reach Over The Front Rack And Turn The Plow Without Leaving My Atv. *** If You Select A Front Mount Kit You Need To Select The Front-mount Push Tube Assembly P/n 92100 *** If You Select A Center Mount Kit You Need To Select The Center-mount Push Tube Assembly P/n 78100 3 Is Self Explanatory Select From One Of 5 Blade Options. 4 If You're Buying And Installing A Winch Along With The Rest Of The Components Make Sure You Read The Instructions For The Front Mount. On Mine Parts Of The Front Mount Kit Replace A Couple Components On The Winch Mount Kit So Right After You Finish Installing The Winch Mount You've Got To Take It Apart To Install The Plow Mount. Because Of This I Strongly Recommend Buying A Warn Winch Mount Regardless Of What Winch You Put In It. Warn Winch Mounts Should Be Compatible With Warn Plow Mounts. Any Decent Roller Fairlead Will Work. Do Not Use A Hawse-style Fairlead. In Addition To Their Regular Fairleads (which Will Work Acceptably) Warn Sells A Roller Fairlead Specifically Designed For Plowing P/n 69373. This Fairlead Has A Very Large Bottom Roller To Reduce The Tightness Of The Bend And Extend Winch Cable Life. Warn Also Sells A 8' Synthetic Plow Lift Rope (p/n 68560) To Save Wear And Tear On Your Regular Winch Cable. The Synthetic Rope Is Much Larger Than A Standard Winch Line. You'll Get A Lot More Life Out Of It Than A Regular Wire Cable. I Recommend A Fast Winch - You'll Be Raising And Lowering Dozens Of Times While Plowing. Make Sure You Mount Your Winch Control In A Convenient Location - You Don't Want To Have To Reach For It Each Time. There Are A Few Useful Options Available: 1. Power Pivot (p/n 79360) - Electric Motor Rotates The Plow Blade. If You're Doing A Lot Of Plowing This Might Be Useful. 2. Bucket Loader Conversion (p/n 83133 84133 Or 85133 Depending On Blade Width) - Converts A Regular Plow Blade Into A Bucket Loader For Handling Loose Material (sand Gravel Topsoil Mulch Etc. ) There Are A Few Hangups You'll Have In Certain Situations. For Instance If You Want To Use An Assembled Plow On Two Different Model Atvs It May Or May Not Work. The Vehicle-specific Mounting Kit Contains Two "tabs" That Bolt On To The Push Tube And Allow It To Quickly Attach To The Mount. The Tabs For One Model May Or May Not Be The Same Height Or Spacing As Tabs For Another Model. If You're Trying To Have Two Plows For One Atv (one Regular Plow And One With The "bucket" Conversion) You'll Be Missing A Set Of The Aforementioned "tabs" For The Second Plow And You'll Need To Contact Warn To Obtain A Second Set. They've Been Sending Them Out For Free But Contact Them First To Confirm. Once You've Got All The Correct Parts Assembly Should Be Fairly Straightforward. Unfortunately You'll Be Reading From 3-5 Different Assembly Manuals Simultaneously One For Each Of The Parts You Purchased So It Can Be A Little Confusing. This Is My Only Real Gripe With The Whole Kit So Far.
G. Elida, Wandsworth
WARN 78954 PROVANTAGE 54" STRAIGHT PLOW BLADE Featured
Best Auto Part (Automotive Parts And Accessories) reviews for WARN 78954 ProVantage 54" Straight Plow Blade available as-of ( Aug 2019 )
Heavy duty ribbingBoxed design adds extra supportCenter cross member for added rigidityMade from thick 12-gauge steel
VIPER ATV / UTV Winch Rubber Line Stopper Hook Saver
Stops Your Clevis Hook From Pulling Through Your Winch Roller Fairlead Or Aluminum Hawse Causing Damage To Your Winch Cable And Bumper. Prevents Damage And Eliminates Rattle/chatter Between The Fairlead And Clevis Hook. Rubber Line Stopper/saver Works With All Brands Of Atv/utv Winches Steel Cables And Synthetic Ropes.
Stops The Hook From Getting Jammed Into The Roller. Yes It Will Split If You Just Keep Pulling The Winch Into The Roller And The Hook Just Keeps Going. Its Rubber For Goodness Sakes. Stop When You Here It Starting To Whine. That Means The Hook Has Met The Rollers With The Rubber. Seems Pretty Easy. Learn A Few Things About Your Winch And Its Properties Before You Go Out And Tear Up Your Equipment. It Is A Real Lifesaver When Your Winch Is Needed And Your Four Wheeler Is In A Pinch. Also The Rubber Stopper Is Good To Stop The Line From Flying Thru The Air If The Line Happens To Break. Put It In The Middle Of The Line When Winching Yourself Out. Just A Nice Added Benefit .
Review from M. Delgado, New Jersey
Review from L. Reed, Kent
I Had To Fix A Break In My 1/4" Synthetic Winch Cable. I Simply Installed This Prior To Repairing The Line. I Made A Locked Brummel Hitch Around A 1/4" Steel Thimble. I Would Recommend Using A 3/8" Or Even 1/2" Steel Thimble On 1/4" Synthetic Winch Cable. The 1/4" Thimble Was Too Small And Some Of The Cable Is Too Exposed Causing Excessive Wear. Moto Aliance Rubber Line Stopper Sunk Back Onto The Thimble When I Reeled The Winch Back In. I Think It Will Solve My Issue Of The Winch Hook Banging Around As Well As Giving Me A Little Bumper In The Event I Reel In The Winch Too Deep.
Works Great. Just Remember To Put This On The Cable Before Putting Cable On Winch!!! I've Had This Line Stopper On Now For A Couple Months And It Is Holding Up Fine With A Lot Of Plow Work In Dirt ( Tuffest Test For Cable And Rubber Line Stoppers. )
Solid Piece Of Rubber Very Durable But Even The Galvanized Thimble On The End Of The Synthetic Atv Winch Rope Wouldn't Fit Through The Opening. Had To Unspool And Detach The Cable From The Spool To Install It. I Wouldn't Hesitate To Buy Another One If I Was Replacing Worn Rope On A Winch But To Go On A New Winch I'd Opt For A 2 Piece Stopper.
Best Powersports Vehicle Part (motoalliance) reviews for VIPER ATV / UTV Winch Rubber Line Stopper Hook Saver available as-of ( Aug 2019 )
Stops your clevis hook from pulling through the roller fairlead or aluminum hawseWorks with cables up to 1/4" in diameterFor use with aluminum hawse (cable/rope) and roller (steel) fairleadsRubber, one piece design - no sharp edges to fray ropes
My Son Wore Out The Cheaply Made Snubber That Came With His Winch And After A Little Research Kfi Seemed To Be The Answer. Glad We Ordered This Snubber Probably Wear Out The Winch Before We Replace This Snubber Again. So If In Doubt I Highly Recommend You Buy This Product From Kfi !!
Review from V. Kelly, Rhode Island
Review from Y. Erickson, Alaska
This Stopper Looks Cheap But It's Solid Rubberized Material. The Cable Loop Passes Through The Slits Snuggly. Let It Dangle Outside The Fairlead Rollers So The Retracting Cable Can Reel In Evenly On The Cable Spool. Stuffing The Stopper In Between The Fairlead Roller Causes The Cable To Feed Into The Middle Of The Spool And That's A No-no. Take My Word For It.
Easy To Install And Never Hear The Clamp Banging Against The Rollers I Would Recommend This To Anyone With A Winch Its A Must Have
This Fit Perfect On My Falcon 3500 Winch. Took Off The Hook And With A Little Leverage From Some Pliers It Slid Right On. Fits Perfectly Between The Sides Of My Fairlead. Couldn't Be Happier With It. Great Deal At $12 And Some Change. I Put A Picture Up Of The Great Fit
Best Auto Accessory (kfi products) reviews for KFI Products ATV-CHS Winch Cable Hook Stopper available as-of ( Aug 2019 )
Unlike all other mount competitors our mounts are metal bead blasted before they are powder coated for the best possible finish preparationConstructed of 3/16 inch steelPowder coated black for supreme durability; easy to install
WARN 39557 ATV Hook and Strap
Replacement Hook And Strap For Warn Atv Winches. Keep Safe In All Winching Activities Hook Features A Safety Latch While The Hook Strap Helps Protect Hands And Fingers From Rollers.
The F.A.Q. for Warn 68560 Synthetic Plow Lift Rope (Auto Part)
Does exactly as intended which is take the stress off my regular winch rope. The rope is super easy to install and swap back/forth with regular rope if needed.
A number of questions have been asked here.
Q&A
(0) Question: what is the length of splice?
Answer: hi there: our advice, just buy a good rope and hook. tie a good knot and it will suffice. save your money.
(1) Question: strength of rope
Answer: get it at harbor freight it's better stronger and cheaper
(2) Question: what is the diameter of this rope? i have a 5' plow.
Answer: i don't know the diameter however i have a 60 inch plow with the actuator motor weight also and the rope works fine i had purchased the bigger fairlead roller to ease tension at the fairlead and use a pulley at the plow connection and have not had any problems (second year on the rope). because i don't like to stre i don't know the diameter however i have a 60 inch plow with the actuator motor weight also and the rope works fine i had purchased the bigger fairlead roller to ease tension at the fairlead and use a pulley at the plow connection and have not had any problems (second year on the rope). because i don't like to stretch it (pardon the pun) i will replace the rope at the start of next season. i plow 5 different parking areas with my plow so the rope gets a lot of use.
(3) Question: whats involved to swap out my steel wire for synthetic for plow? superwinch 3000#on a 2004 honda foreman 450es
Answer: remove cable and set pin tape end of rope feed thru hole you do not use set pin wind in cable you are all set as there is 12 feet of rope so it will not let loose
(4) Question: does it come with the little metal puck that locks it into place?
Answer: no
(note) Question: where/how to get Warn (manufacturer's brand) accessories & similiar Warn's products
I have used this warn atv rope now for 2 years and am very happy with it. I replaced my steel cable because it couldn't handle the wear and tear of lifting and lowering at the same place on the cable. The other review says the rope broke after 1 hour, i would guess that he did not replace the rollers in the fairlead that were all chewed up by his bad steel cable. I recommend this product
Best warn 68560 synthetic plow lift rope (auto part) in review
As described, quick delivery
I. Kathlene, Utah
You might like to see Warn 84526 Provantage Atv Plow Pulley Auto Accessory 84526
Supplementary: Doubles the lifting advantage and slowing blade movement
Supplementary: Pulley provides better control of plow blade
warn 84526 provantage atv plow pulley: warn auto accessory provantage plow pulley provides better control of plow blade by doubling the lifting advantage Warn 84526 Provantage Atv Plow Pulley (Auto
Or you might like to consider Warn 67870 Atv Plow Blade Control Flap Auto Part 67870
Details: Made of flexible black rubber
Details: Keeps snow kick-back out of your face
warn 67870 atv plow blade control flap: warn auto part the atv plow blade control flap is great for snow plowing it controls snow kickback keeping the Warn 67870 Atv Plow Blade Control Flap (Auto
F. Nielsen, Ohio says
Wouldn't fit in the hole on my masterlock winch, so i used a large cotter pin to grip the rope and wound it up over the tail as required.
V. Hurst, Lambeth
Finally installed this for my plow setup because it finally snowed. I'm glad to be using this instead of putting a kink in my steel cable on the winch. Did a couple hours worth of plowing and it held up great and time will tell as i continue to use it through the season.
G. Joanne, Kentucky says
Overall i'm happy with this rope but it didn't last as long as i'd hoped. It snapped after about ten plow days of use. Although that's shorter than my steel cable lasted i still prefer the synthetic and will continue to use it. Repairing this is absolutely easier than the steel cable.
T. Kelly, Windsor and Maidenhead
Rope is high quality. Service of vendor was very good. I was replacing a wire cable and didn't realize how tough it would be to fit the rope through the hole in the spindle. (the diameter of the rope is greater than the diameter of the cable. )
R. Wade, Barnet says
We will see what it is like with snow and ice on it, i will up date when i get snow
X. Elanor, Hounslow
My original finally broke from 2007. I am very pleased with the performance as i use my plow a lot of two driveways all winter long.
M. Colleen, Virginia says
I bought this rope as a back up to the one i have been using for several years. I haven't needed to install it yet as the first one continues to work well. My steel cable would break every other year at the most inopportune times. No more breaks now that i use the synthetic plow lift rope. By the way i plow snow a lot, living in alaska.
Q. Sarah, South Dakota
This is a great replacement rope for plowing. Only takes a few minutes to swap out your original rope to this and saves on wear and tear to the 50ft rope.
W. Erin, Walsall says
Good rope and saves the expensive 50 foot synthetic winch rope, i did break one but it was my fault.
N. Hayward, Nevada
This tough synthetic rope solved the wire rope problems that had cost me so much time and frustration. No more stranded wire rope, no more tangled wire rope, no more broken wire rope. It works flawlesly and seems to be as tough as can be. I live in alaska and work my atv/plow hard for long periods of time in some pretty harsh weather conditions. Now, i plow without any problems raising or lowering my plow. Yesss ! this is the answer! . The installation was not difficult. Once again, i found what i needed at online store. Com
C. Ross, Oxfordshire says
Seems well made, easy to install based on its designed ends. Used it for only 2 snow storms, no issues so far. As for now, well recommended. Any changes, i will update
N. Anonymous, South Gloucestershire
This replaced my steel cable that always broke while plowing. This isn't even frayed yet.
Get Discount Warn 85368 Provantage Atv Heavy Duty Plow Steel Skid (Auto Accessory), Provantage atv heavy duty plow steel heavy duty plow skids outlast standard skids by up to 50%, crafted from wear-form steel. for warn provantage plow blades only will not fit 50" blades. -warn 85368 provantage atv heavy duty plow steel skid
Value: For Warn Provantage Plow Blades Only Will Not Fit 50" Blades.
Low Price Cycle Country Plow Marker Kit - Steel 10-0140 (100140), Plow marker kit - steel zox air attack úÿÿÿÿÿÿÿÿincreases visibility of plow edges for safety úÿÿÿÿÿÿÿÿeasily bolts to sides of cycle country plows úÿÿÿÿÿÿÿÿsold in pairs -cycle country plow marker kit - steel 10-0140
Warn-63936-center-plow-mounting: Warn Auto Part Warn Atv Center Plow Mounting Kit Is For Use On Specific Atv Models With The Warn Provantage Or Standard
Supplementary: Pulley provides better control of plow blade
warn 84526 provantage atv plow pulley: warn auto accessory provantage plow pulley provides better control of plow blade by doubling the lifting advantage
WARN 68560 Synthetic Plow Lift Rope 
WARN-68200-Cyclone-Angled-Blade
Warn-62100-ATV-Plow-Base
WARN-67679-Plow-Blade-Marker
Warn-67650-Plow-Electric-Actuator
WARN-67870-Plow-Blade-Control
WARN-67679-Plow-Blade-Marker
WARN-69373-Plow-Roller-Fairlead
KFI-Products-105270-Fairlead-Pulley
WARN-84526-ProVantage-Plow-Pulley
WARN-92100-ProVantage-Plow-Assembly
KFI-Products-ATV-SCHS-Winch-Stopper
WARN-78954-ProVantage-Straight-Blade
VIPER-Winch-Rubber-Stopper-Saver
KFI-Products-ATV-CHS-Winch-Stopper
WARN-39557-ATV-Hook-Strap
